[PATCH AUTOSEL 6.12 15/31] platform/x86: thinkpad_acpi: Fix invalid fan speed on ThinkPad X120e

[PATCH AUTOSEL 6.12 15/31] platform/x86: thinkpad_acpi: Fix invalid fan speed on ThinkPad X120e

[Sasha Levin]

From: Sybil Isabel Dorsett <sybdorsett@proton.me>

[ Upstream commit 1046cac109225eda0973b898e053aeb3d6c10e1d ]

On ThinkPad X120e, fan speed is reported in ticks per revolution
rather than RPM.

Recalculate the fan speed value reported for ThinkPad X120e
to RPM based on a 22.5 kHz clock.

Based on the information on
https://www.thinkwiki.org/wiki/How_to_control_fan_speed,
the same problem is highly likely to be relevant to at least Edge11,
but Edge11 is not addressed in this patch.

Signed-off-by: Sybil Isabel Dorsett <sybdorsett@proton.me>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250203163255.5525-1-sybdorsett@proton.me
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/thinkpad_acpi.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 2cfb2ac3f465a..05d77f87e235e 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -7883,6 +7883,7 @@ static struct ibm_struct volume_driver_data = {
 
 #define FAN_NS_CTRL_STATUS	BIT(2)		/* Bit which determines control is enabled or not */
 #define FAN_NS_CTRL		BIT(4)		/* Bit which determines control is by host or EC */
+#define FAN_CLOCK_TPM		(22500*60)	/* Ticks per minute for a 22.5 kHz clock */
 
 enum {					/* Fan control constants */
 	fan_status_offset = 0x2f,	/* EC register 0x2f */
@@ -7938,6 +7939,7 @@ static int fan_watchdog_maxinterval;
 
 static bool fan_with_ns_addr;
 static bool ecfw_with_fan_dec_rpm;
+static bool fan_speed_in_tpr;
 
 static struct mutex fan_mutex;
 
@@ -8140,8 +8142,11 @@ static int fan_get_speed(unsigned int *speed)
 			     !acpi_ec_read(fan_rpm_offset + 1, &hi)))
 			return -EIO;
 
-		if (likely(speed))
+		if (likely(speed)) {
 			*speed = (hi << 8) | lo;
+			if (fan_speed_in_tpr && *speed != 0)
+				*speed = FAN_CLOCK_TPM / *speed;
+		}
 		break;
 	case TPACPI_FAN_RD_TPEC_NS:
 		if (!acpi_ec_read(fan_rpm_status_ns, &lo))
@@ -8174,8 +8179,11 @@ static int fan2_get_speed(unsigned int *speed)
 		if (rc)
 			return -EIO;
 
-		if (likely(speed))
+		if (likely(speed)) {
 			*speed = (hi << 8) | lo;
+			if (fan_speed_in_tpr && *speed != 0)
+				*speed = FAN_CLOCK_TPM / *speed;
+		}
 		break;
 
 	case TPACPI_FAN_RD_TPEC_NS:
@@ -8786,6 +8794,7 @@ static const struct attribute_group fan_driver_attr_group = {
 #define TPACPI_FAN_NOFAN	0x0008		/* no fan available */
 #define TPACPI_FAN_NS		0x0010		/* For EC with non-Standard register addresses */
 #define TPACPI_FAN_DECRPM	0x0020		/* For ECFW's with RPM in register as decimal */
+#define TPACPI_FAN_TPR		0x0040		/* Fan speed is in Ticks Per Revolution */
 
 static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
 	TPACPI_QEC_IBM('1', 'Y', TPACPI_FAN_Q1),
@@ -8815,6 +8824,7 @@ static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
 	TPACPI_Q_LNV3('R', '0', 'V', TPACPI_FAN_NS),	/* 11e Gen5 KL-Y */
 	TPACPI_Q_LNV3('N', '1', 'O', TPACPI_FAN_NOFAN),	/* X1 Tablet (2nd gen) */
 	TPACPI_Q_LNV3('R', '0', 'Q', TPACPI_FAN_DECRPM),/* L480 */
+	TPACPI_Q_LNV('8', 'F', TPACPI_FAN_TPR),		/* ThinkPad x120e */
 };
 
 static int __init fan_init(struct ibm_init_struct *iibm)
@@ -8885,6 +8895,8 @@ static int __init fan_init(struct ibm_init_struct *iibm)
 
 			if (quirks & TPACPI_FAN_Q1)
 				fan_quirk1_setup();
+			if (quirks & TPACPI_FAN_TPR)
+				fan_speed_in_tpr = true;
 			/* Try and probe the 2nd fan */
 			tp_features.second_fan = 1; /* needed for get_speed to work */
 			res = fan2_get_speed(&speed);
-- 
2.39.5

[PATCH AUTOSEL 6.12 16/31] platform/x86: thinkpad_acpi: Support for V9 DYTC platform profiles

[Sasha Levin]

From: Mark Pearson <mpearson-lenovo@squebb.ca>

[ Upstream commit 9cff907cbf8c7fb5345918dbcc7b74a01656f34f ]

Newer Thinkpad AMD platforms are using V9 DYTC and this changes the
profiles used for PSC mode. Add support for this update.
Tested on P14s G5 AMD

Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250206193953.58365-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/thinkpad_acpi.c | 34 ++++++++++++++++++----------
 1 file changed, 22 insertions(+), 12 deletions(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 05d77f87e235e..31ec9ec9206cf 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -10329,6 +10329,10 @@ static struct ibm_struct proxsensor_driver_data = {
 #define DYTC_MODE_PSC_BALANCE  5  /* Default mode aka balanced */
 #define DYTC_MODE_PSC_PERFORM  7  /* High power mode aka performance */
 
+#define DYTC_MODE_PSCV9_LOWPOWER 1  /* Low power mode */
+#define DYTC_MODE_PSCV9_BALANCE  3  /* Default mode aka balanced */
+#define DYTC_MODE_PSCV9_PERFORM  4  /* High power mode aka performance */
+
 #define DYTC_ERR_MASK       0xF  /* Bits 0-3 in cmd result are the error result */
 #define DYTC_ERR_SUCCESS      1  /* CMD completed successful */
 
@@ -10349,6 +10353,10 @@ static int dytc_capabilities;
 static bool dytc_mmc_get_available;
 static int profile_force;
 
+static int platform_psc_profile_lowpower = DYTC_MODE_PSC_LOWPOWER;
+static int platform_psc_profile_balanced = DYTC_MODE_PSC_BALANCE;
+static int platform_psc_profile_performance = DYTC_MODE_PSC_PERFORM;
+
 static int convert_dytc_to_profile(int funcmode, int dytcmode,
 		enum platform_profile_option *profile)
 {
@@ -10370,19 +10378,15 @@ static int convert_dytc_to_profile(int funcmode, int dytcmode,
 		}
 		return 0;
 	case DYTC_FUNCTION_PSC:
-		switch (dytcmode) {
-		case DYTC_MODE_PSC_LOWPOWER:
+		if (dytcmode == platform_psc_profile_lowpower)
 			*profile = PLATFORM_PROFILE_LOW_POWER;
-			break;
-		case DYTC_MODE_PSC_BALANCE:
+		else if (dytcmode == platform_psc_profile_balanced)
 			*profile =  PLATFORM_PROFILE_BALANCED;
-			break;
-		case DYTC_MODE_PSC_PERFORM:
+		else if (dytcmode == platform_psc_profile_performance)
 			*profile =  PLATFORM_PROFILE_PERFORMANCE;
-			break;
-		default: /* Unknown mode */
+		else
 			return -EINVAL;
-		}
+
 		return 0;
 	case DYTC_FUNCTION_AMT:
 		/* For now return balanced. It's the closest we have to 'auto' */
@@ -10403,19 +10407,19 @@ static int convert_profile_to_dytc(enum platform_profile_option profile, int *pe
 		if (dytc_capabilities & BIT(DYTC_FC_MMC))
 			*perfmode = DYTC_MODE_MMC_LOWPOWER;
 		else if (dytc_capabilities & BIT(DYTC_FC_PSC))
-			*perfmode = DYTC_MODE_PSC_LOWPOWER;
+			*perfmode = platform_psc_profile_lowpower;
 		break;
 	case PLATFORM_PROFILE_BALANCED:
 		if (dytc_capabilities & BIT(DYTC_FC_MMC))
 			*perfmode = DYTC_MODE_MMC_BALANCE;
 		else if (dytc_capabilities & BIT(DYTC_FC_PSC))
-			*perfmode = DYTC_MODE_PSC_BALANCE;
+			*perfmode = platform_psc_profile_balanced;
 		break;
 	case PLATFORM_PROFILE_PERFORMANCE:
 		if (dytc_capabilities & BIT(DYTC_FC_MMC))
 			*perfmode = DYTC_MODE_MMC_PERFORM;
 		else if (dytc_capabilities & BIT(DYTC_FC_PSC))
-			*perfmode = DYTC_MODE_PSC_PERFORM;
+			*perfmode = platform_psc_profile_performance;
 		break;
 	default: /* Unknown profile */
 		return -EOPNOTSUPP;
@@ -10604,6 +10608,7 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
 	if (output & BIT(DYTC_QUERY_ENABLE_BIT))
 		dytc_version = (output >> DYTC_QUERY_REV_BIT) & 0xF;
 
+	dbg_printk(TPACPI_DBG_INIT, "DYTC version %d\n", dytc_version);
 	/* Check DYTC is enabled and supports mode setting */
 	if (dytc_version < 5)
 		return -ENODEV;
@@ -10642,6 +10647,11 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
 		}
 	} else if (dytc_capabilities & BIT(DYTC_FC_PSC)) { /* PSC MODE */
 		pr_debug("PSC is supported\n");
+		if (dytc_version >= 9) { /* update profiles for DYTC 9 and up */
+			platform_psc_profile_lowpower = DYTC_MODE_PSCV9_LOWPOWER;
+			platform_psc_profile_balanced = DYTC_MODE_PSCV9_BALANCE;
+			platform_psc_profile_performance = DYTC_MODE_PSCV9_PERFORM;
+		}
 	} else {
 		dbg_printk(TPACPI_DBG_INIT, "No DYTC support available\n");
 		return -ENODEV;
-- 
2.39.5

[PATCH AUTOSEL 6.12 17/31] platform/x86: int3472: Use correct type for "polarity", call it gpio_flags

[Sasha Levin]

From: Sakari Ailus <sakari.ailus@linux.intel.com>

[ Upstream commit fc22b06fbd2afefa1eddff69a6fd30c539cef577 ]

Struct gpiod_lookup flags field's type is unsigned long. Thus use unsigned
long for values to be assigned to that field. Similarly, also call the
field gpio_flags which it really is.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250211072841.7713-2-sakari.ailus@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel/int3472/discrete.c | 39 ++++++++++---------
 1 file changed, 20 insertions(+), 19 deletions(-)

diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c
index 15678508ee501..dc4d09611c5ab 100644
--- a/drivers/platform/x86/intel/int3472/discrete.c
+++ b/drivers/platform/x86/intel/int3472/discrete.c
@@ -55,7 +55,7 @@ static void skl_int3472_log_sensor_module_name(struct int3472_discrete_device *i
 
 static int skl_int3472_fill_gpiod_lookup(struct gpiod_lookup *table_entry,
 					 struct acpi_resource_gpio *agpio,
-					 const char *func, u32 polarity)
+					 const char *func, unsigned long gpio_flags)
 {
 	char *path = agpio->resource_source.string_ptr;
 	struct acpi_device *adev;
@@ -70,14 +70,14 @@ static int skl_int3472_fill_gpiod_lookup(struct gpiod_lookup *table_entry,
 	if (!adev)
 		return -ENODEV;
 
-	*table_entry = GPIO_LOOKUP(acpi_dev_name(adev), agpio->pin_table[0], func, polarity);
+	*table_entry = GPIO_LOOKUP(acpi_dev_name(adev), agpio->pin_table[0], func, gpio_flags);
 
 	return 0;
 }
 
 static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int3472,
 					  struct acpi_resource_gpio *agpio,
-					  const char *func, u32 polarity)
+					  const char *func, unsigned long gpio_flags)
 {
 	int ret;
 
@@ -87,7 +87,7 @@ static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int347
 	}
 
 	ret = skl_int3472_fill_gpiod_lookup(&int3472->gpios.table[int3472->n_sensor_gpios],
-					    agpio, func, polarity);
+					    agpio, func, gpio_flags);
 	if (ret)
 		return ret;
 
@@ -100,7 +100,7 @@ static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int347
 static struct gpio_desc *
 skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472,
 				       struct acpi_resource_gpio *agpio,
-				       const char *func, u32 polarity)
+				       const char *func, unsigned long gpio_flags)
 {
 	struct gpio_desc *desc;
 	int ret;
@@ -111,7 +111,7 @@ skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472,
 		return ERR_PTR(-ENOMEM);
 
 	lookup->dev_id = dev_name(int3472->dev);
-	ret = skl_int3472_fill_gpiod_lookup(&lookup->table[0], agpio, func, polarity);
+	ret = skl_int3472_fill_gpiod_lookup(&lookup->table[0], agpio, func, gpio_flags);
 	if (ret)
 		return ERR_PTR(ret);
 
@@ -122,32 +122,33 @@ skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472,
 	return desc;
 }
 
-static void int3472_get_func_and_polarity(u8 type, const char **func, u32 *polarity)
+static void int3472_get_func_and_polarity(u8 type, const char **func,
+					  unsigned long *gpio_flags)
 {
 	switch (type) {
 	case INT3472_GPIO_TYPE_RESET:
 		*func = "reset";
-		*polarity = GPIO_ACTIVE_LOW;
+		*gpio_flags = GPIO_ACTIVE_LOW;
 		break;
 	case INT3472_GPIO_TYPE_POWERDOWN:
 		*func = "powerdown";
-		*polarity = GPIO_ACTIVE_LOW;
+		*gpio_flags = GPIO_ACTIVE_LOW;
 		break;
 	case INT3472_GPIO_TYPE_CLK_ENABLE:
 		*func = "clk-enable";
-		*polarity = GPIO_ACTIVE_HIGH;
+		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	case INT3472_GPIO_TYPE_PRIVACY_LED:
 		*func = "privacy-led";
-		*polarity = GPIO_ACTIVE_HIGH;
+		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	case INT3472_GPIO_TYPE_POWER_ENABLE:
 		*func = "power-enable";
-		*polarity = GPIO_ACTIVE_HIGH;
+		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	default:
 		*func = "unknown";
-		*polarity = GPIO_ACTIVE_HIGH;
+		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	}
 }
@@ -194,7 +195,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 	struct gpio_desc *gpio;
 	const char *err_msg;
 	const char *func;
-	u32 polarity;
+	unsigned long gpio_flags;
 	int ret;
 
 	if (!acpi_gpio_get_io_resource(ares, &agpio))
@@ -217,7 +218,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 
 	type = FIELD_GET(INT3472_GPIO_DSM_TYPE, obj->integer.value);
 
-	int3472_get_func_and_polarity(type, &func, &polarity);
+	int3472_get_func_and_polarity(type, &func, &gpio_flags);
 
 	pin = FIELD_GET(INT3472_GPIO_DSM_PIN, obj->integer.value);
 	if (pin != agpio->pin_table[0])
@@ -227,16 +228,16 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 
 	active_value = FIELD_GET(INT3472_GPIO_DSM_SENSOR_ON_VAL, obj->integer.value);
 	if (!active_value)
-		polarity ^= GPIO_ACTIVE_LOW;
+		gpio_flags ^= GPIO_ACTIVE_LOW;
 
 	dev_dbg(int3472->dev, "%s %s pin %d active-%s\n", func,
 		agpio->resource_source.string_ptr, agpio->pin_table[0],
-		str_high_low(polarity == GPIO_ACTIVE_HIGH));
+		str_high_low(gpio_flags == GPIO_ACTIVE_HIGH));
 
 	switch (type) {
 	case INT3472_GPIO_TYPE_RESET:
 	case INT3472_GPIO_TYPE_POWERDOWN:
-		ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, func, polarity);
+		ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, func, gpio_flags);
 		if (ret)
 			err_msg = "Failed to map GPIO pin to sensor\n";
 
@@ -244,7 +245,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 	case INT3472_GPIO_TYPE_CLK_ENABLE:
 	case INT3472_GPIO_TYPE_PRIVACY_LED:
 	case INT3472_GPIO_TYPE_POWER_ENABLE:
-		gpio = skl_int3472_gpiod_get_from_temp_lookup(int3472, agpio, func, polarity);
+		gpio = skl_int3472_gpiod_get_from_temp_lookup(int3472, agpio, func, gpio_flags);
 		if (IS_ERR(gpio)) {
 			ret = PTR_ERR(gpio);
 			err_msg = "Failed to get GPIO\n";
-- 
2.39.5

[PATCH AUTOSEL 6.12 18/31] platform/x86: int3472: Call "reset" GPIO "enable" for INT347E

[Sasha Levin]

From: Sakari Ailus <sakari.ailus@linux.intel.com>

[ Upstream commit 569617dbbd06286fb73f3f1c2ac91e51d863c7de ]

The DT bindings for ov7251 specify "enable" GPIO (xshutdown in
documentation) but the int3472 indiscriminately provides this as a "reset"
GPIO to sensor drivers. Take this into account by assigning it as "enable"
with active high polarity for INT347E devices, i.e. ov7251. "reset" with
active low polarity remains the default GPIO name for other devices.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250211072841.7713-3-sakari.ailus@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel/int3472/discrete.c | 52 +++++++++++++++++--
 1 file changed, 48 insertions(+), 4 deletions(-)

diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c
index dc4d09611c5ab..9e69ac9cfb92c 100644
--- a/drivers/platform/x86/intel/int3472/discrete.c
+++ b/drivers/platform/x86/intel/int3472/discrete.c
@@ -2,6 +2,7 @@
 /* Author: Dan Scally <djrscally@gmail.com> */
 
 #include <linux/acpi.h>
+#include <linux/array_size.h>
 #include <linux/bitfield.h>
 #include <linux/device.h>
 #include <linux/gpio/consumer.h>
@@ -122,10 +123,53 @@ skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472,
 	return desc;
 }
 
-static void int3472_get_func_and_polarity(u8 type, const char **func,
-					  unsigned long *gpio_flags)
+/**
+ * struct int3472_gpio_map - Map GPIOs to whatever is expected by the
+ * sensor driver (as in DT bindings)
+ * @hid: The ACPI HID of the device without the instance number e.g. INT347E
+ * @type_from: The GPIO type from ACPI ?SDT
+ * @type_to: The assigned GPIO type, typically same as @type_from
+ * @func: The function, e.g. "enable"
+ * @polarity_low: GPIO_ACTIVE_LOW true if the @polarity_low is true,
+ * GPIO_ACTIVE_HIGH otherwise
+ */
+struct int3472_gpio_map {
+	const char *hid;
+	u8 type_from;
+	u8 type_to;
+	bool polarity_low;
+	const char *func;
+};
+
+static const struct int3472_gpio_map int3472_gpio_map[] = {
+	{ "INT347E", INT3472_GPIO_TYPE_RESET, INT3472_GPIO_TYPE_RESET, false, "enable" },
+};
+
+static void int3472_get_func_and_polarity(struct acpi_device *adev, u8 *type,
+					  const char **func, unsigned long *gpio_flags)
 {
-	switch (type) {
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(int3472_gpio_map); i++) {
+		/*
+		 * Map the firmware-provided GPIO to whatever a driver expects
+		 * (as in DT bindings). First check if the type matches with the
+		 * GPIO map, then further check that the device _HID matches.
+		 */
+		if (*type != int3472_gpio_map[i].type_from)
+			continue;
+
+		if (!acpi_dev_hid_uid_match(adev, int3472_gpio_map[i].hid, NULL))
+			continue;
+
+		*type = int3472_gpio_map[i].type_to;
+		*gpio_flags = int3472_gpio_map[i].polarity_low ?
+			      GPIO_ACTIVE_LOW : GPIO_ACTIVE_HIGH;
+		*func = int3472_gpio_map[i].func;
+		return;
+	}
+
+	switch (*type) {
 	case INT3472_GPIO_TYPE_RESET:
 		*func = "reset";
 		*gpio_flags = GPIO_ACTIVE_LOW;
@@ -218,7 +262,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 
 	type = FIELD_GET(INT3472_GPIO_DSM_TYPE, obj->integer.value);
 
-	int3472_get_func_and_polarity(type, &func, &gpio_flags);
+	int3472_get_func_and_polarity(int3472->sensor, &type, &func, &gpio_flags);
 
 	pin = FIELD_GET(INT3472_GPIO_DSM_PIN, obj->integer.value);
 	if (pin != agpio->pin_table[0])
-- 
2.39.5