[PATCH AUTOSEL 6.1 07/13] platform/x86: thinkpad_acpi: Fix invalid fan speed on ThinkPad X120e

[PATCH AUTOSEL 6.1 07/13] platform/x86: thinkpad_acpi: Fix invalid fan speed on ThinkPad X120e

[Sasha Levin]

From: Sybil Isabel Dorsett <sybdorsett@proton.me>

[ Upstream commit 1046cac109225eda0973b898e053aeb3d6c10e1d ]

On ThinkPad X120e, fan speed is reported in ticks per revolution
rather than RPM.

Recalculate the fan speed value reported for ThinkPad X120e
to RPM based on a 22.5 kHz clock.

Based on the information on
https://www.thinkwiki.org/wiki/How_to_control_fan_speed,
the same problem is highly likely to be relevant to at least Edge11,
but Edge11 is not addressed in this patch.

Signed-off-by: Sybil Isabel Dorsett <sybdorsett@proton.me>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250203163255.5525-1-sybdorsett@proton.me
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/thinkpad_acpi.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index bedc6cd51f399..0955624572316 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -8161,6 +8161,7 @@ static struct ibm_struct volume_driver_data = {
 
 #define FAN_NS_CTRL_STATUS	BIT(2)		/* Bit which determines control is enabled or not */
 #define FAN_NS_CTRL		BIT(4)		/* Bit which determines control is by host or EC */
+#define FAN_CLOCK_TPM		(22500*60)	/* Ticks per minute for a 22.5 kHz clock */
 
 enum {					/* Fan control constants */
 	fan_status_offset = 0x2f,	/* EC register 0x2f */
@@ -8214,6 +8215,7 @@ static int fan_watchdog_maxinterval;
 
 static bool fan_with_ns_addr;
 static bool ecfw_with_fan_dec_rpm;
+static bool fan_speed_in_tpr;
 
 static struct mutex fan_mutex;
 
@@ -8396,8 +8398,11 @@ static int fan_get_speed(unsigned int *speed)
 			     !acpi_ec_read(fan_rpm_offset + 1, &hi)))
 			return -EIO;
 
-		if (likely(speed))
+		if (likely(speed)) {
 			*speed = (hi << 8) | lo;
+			if (fan_speed_in_tpr && *speed != 0)
+				*speed = FAN_CLOCK_TPM / *speed;
+		}
 		break;
 	case TPACPI_FAN_RD_TPEC_NS:
 		if (!acpi_ec_read(fan_rpm_status_ns, &lo))
@@ -8430,8 +8435,11 @@ static int fan2_get_speed(unsigned int *speed)
 		if (rc)
 			return -EIO;
 
-		if (likely(speed))
+		if (likely(speed)) {
 			*speed = (hi << 8) | lo;
+			if (fan_speed_in_tpr && *speed != 0)
+				*speed = FAN_CLOCK_TPM / *speed;
+		}
 		break;
 
 	case TPACPI_FAN_RD_TPEC_NS:
@@ -8959,6 +8967,7 @@ static const struct attribute_group fan_driver_attr_group = {
 #define TPACPI_FAN_NOFAN	0x0008		/* no fan available */
 #define TPACPI_FAN_NS		0x0010		/* For EC with non-Standard register addresses */
 #define TPACPI_FAN_DECRPM	0x0020		/* For ECFW's with RPM in register as decimal */
+#define TPACPI_FAN_TPR		0x0040		/* Fan speed is in Ticks Per Revolution */
 
 static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
 	TPACPI_QEC_IBM('1', 'Y', TPACPI_FAN_Q1),
@@ -8981,6 +8990,7 @@ static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
 	TPACPI_Q_LNV3('N', '2', 'U', TPACPI_FAN_NS),	/* X13 Yoga Gen 2*/
 	TPACPI_Q_LNV3('N', '1', 'O', TPACPI_FAN_NOFAN),	/* X1 Tablet (2nd gen) */
 	TPACPI_Q_LNV3('R', '0', 'Q', TPACPI_FAN_DECRPM),/* L480 */
+	TPACPI_Q_LNV('8', 'F', TPACPI_FAN_TPR),		/* ThinkPad x120e */
 };
 
 static int __init fan_init(struct ibm_init_struct *iibm)
@@ -9044,6 +9054,8 @@ static int __init fan_init(struct ibm_init_struct *iibm)
 
 			if (quirks & TPACPI_FAN_Q1)
 				fan_quirk1_setup();
+			if (quirks & TPACPI_FAN_TPR)
+				fan_speed_in_tpr = true;
 			/* Try and probe the 2nd fan */
 			tp_features.second_fan = 1; /* needed for get_speed to work */
 			res = fan2_get_speed(&speed);
-- 
2.39.5

[PATCH AUTOSEL 6.1 08/13] platform/x86: thinkpad_acpi: Support for V9 DYTC platform profiles

[Sasha Levin]

From: Mark Pearson <mpearson-lenovo@squebb.ca>

[ Upstream commit 9cff907cbf8c7fb5345918dbcc7b74a01656f34f ]

Newer Thinkpad AMD platforms are using V9 DYTC and this changes the
profiles used for PSC mode. Add support for this update.
Tested on P14s G5 AMD

Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250206193953.58365-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/thinkpad_acpi.c | 34 ++++++++++++++++++----------
 1 file changed, 22 insertions(+), 12 deletions(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 0955624572316..7d6961d355428 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -10484,6 +10484,10 @@ static struct ibm_struct proxsensor_driver_data = {
 #define DYTC_MODE_PSC_BALANCE  5  /* Default mode aka balanced */
 #define DYTC_MODE_PSC_PERFORM  7  /* High power mode aka performance */
 
+#define DYTC_MODE_PSCV9_LOWPOWER 1  /* Low power mode */
+#define DYTC_MODE_PSCV9_BALANCE  3  /* Default mode aka balanced */
+#define DYTC_MODE_PSCV9_PERFORM  4  /* High power mode aka performance */
+
 #define DYTC_ERR_MASK       0xF  /* Bits 0-3 in cmd result are the error result */
 #define DYTC_ERR_SUCCESS      1  /* CMD completed successful */
 
@@ -10504,6 +10508,10 @@ static int dytc_capabilities;
 static bool dytc_mmc_get_available;
 static int profile_force;
 
+static int platform_psc_profile_lowpower = DYTC_MODE_PSC_LOWPOWER;
+static int platform_psc_profile_balanced = DYTC_MODE_PSC_BALANCE;
+static int platform_psc_profile_performance = DYTC_MODE_PSC_PERFORM;
+
 static int convert_dytc_to_profile(int funcmode, int dytcmode,
 		enum platform_profile_option *profile)
 {
@@ -10525,19 +10533,15 @@ static int convert_dytc_to_profile(int funcmode, int dytcmode,
 		}
 		return 0;
 	case DYTC_FUNCTION_PSC:
-		switch (dytcmode) {
-		case DYTC_MODE_PSC_LOWPOWER:
+		if (dytcmode == platform_psc_profile_lowpower)
 			*profile = PLATFORM_PROFILE_LOW_POWER;
-			break;
-		case DYTC_MODE_PSC_BALANCE:
+		else if (dytcmode == platform_psc_profile_balanced)
 			*profile =  PLATFORM_PROFILE_BALANCED;
-			break;
-		case DYTC_MODE_PSC_PERFORM:
+		else if (dytcmode == platform_psc_profile_performance)
 			*profile =  PLATFORM_PROFILE_PERFORMANCE;
-			break;
-		default: /* Unknown mode */
+		else
 			return -EINVAL;
-		}
+
 		return 0;
 	case DYTC_FUNCTION_AMT:
 		/* For now return balanced. It's the closest we have to 'auto' */
@@ -10558,19 +10562,19 @@ static int convert_profile_to_dytc(enum platform_profile_option profile, int *pe
 		if (dytc_capabilities & BIT(DYTC_FC_MMC))
 			*perfmode = DYTC_MODE_MMC_LOWPOWER;
 		else if (dytc_capabilities & BIT(DYTC_FC_PSC))
-			*perfmode = DYTC_MODE_PSC_LOWPOWER;
+			*perfmode = platform_psc_profile_lowpower;
 		break;
 	case PLATFORM_PROFILE_BALANCED:
 		if (dytc_capabilities & BIT(DYTC_FC_MMC))
 			*perfmode = DYTC_MODE_MMC_BALANCE;
 		else if (dytc_capabilities & BIT(DYTC_FC_PSC))
-			*perfmode = DYTC_MODE_PSC_BALANCE;
+			*perfmode = platform_psc_profile_balanced;
 		break;
 	case PLATFORM_PROFILE_PERFORMANCE:
 		if (dytc_capabilities & BIT(DYTC_FC_MMC))
 			*perfmode = DYTC_MODE_MMC_PERFORM;
 		else if (dytc_capabilities & BIT(DYTC_FC_PSC))
-			*perfmode = DYTC_MODE_PSC_PERFORM;
+			*perfmode = platform_psc_profile_performance;
 		break;
 	default: /* Unknown profile */
 		return -EOPNOTSUPP;
@@ -10759,6 +10763,7 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
 	if (output & BIT(DYTC_QUERY_ENABLE_BIT))
 		dytc_version = (output >> DYTC_QUERY_REV_BIT) & 0xF;
 
+	dbg_printk(TPACPI_DBG_INIT, "DYTC version %d\n", dytc_version);
 	/* Check DYTC is enabled and supports mode setting */
 	if (dytc_version < 5)
 		return -ENODEV;
@@ -10797,6 +10802,11 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
 		}
 	} else if (dytc_capabilities & BIT(DYTC_FC_PSC)) { /* PSC MODE */
 		pr_debug("PSC is supported\n");
+		if (dytc_version >= 9) { /* update profiles for DYTC 9 and up */
+			platform_psc_profile_lowpower = DYTC_MODE_PSCV9_LOWPOWER;
+			platform_psc_profile_balanced = DYTC_MODE_PSCV9_BALANCE;
+			platform_psc_profile_performance = DYTC_MODE_PSCV9_PERFORM;
+		}
 	} else {
 		dbg_printk(TPACPI_DBG_INIT, "No DYTC support available\n");
 		return -ENODEV;
-- 
2.39.5