[PATCH] platform/x86: hp-wmi: Add Omen 16-wf0xxx fan and thermal support

[PATCH] platform/x86: hp-wmi: Add Omen 16-wf0xxx fan and thermal support

[Krishna Chomal]

The HP Omen 16-wf0xxx (board ID: 8BAB) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile (similar to HP Omen 16-wf1xxx, board ID: 8C78).

Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_thermal_params.

Testing on HP Omen 16-wf0xxx confirmed that platform profile is
registered successfully and fan RPMs are readable and controllable.

Suggested-by: Noah Provenzano <noahpro@gmail.com>
Tested-by: Juan Martin Morales <juanm4morales@gmail.com>
Reported-by: Juan Martin Morales <juanm4morales@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220639
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
---
This completes the earlier patch from Noah Provenzano [1].
Thermal profile quirk handling was added in 8ca7515d3c76, and now
addition of "8BAB" in victus_s_thermal_profile_boards[] list completes
the mentioned patch cleanly.

[1] https://patchwork.kernel.org/project/platform-driver-x86/patch/20250731213529.27378-1-noahpro@gmail.com/
---
 drivers/platform/x86/hp/hp-wmi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/platform/x86/hp/hp-wmi.c b/drivers/platform/x86/hp/hp-wmi.c
index 304d9ac63c8a..6a1b454baaee 100644
--- a/drivers/platform/x86/hp/hp-wmi.c
+++ b/drivers/platform/x86/hp/hp-wmi.c
@@ -173,6 +173,10 @@ static const char * const victus_thermal_profile_boards[] = {
 
 /* DMI Board names of Victus 16-r and Victus 16-s laptops */
 static const struct dmi_system_id victus_s_thermal_profile_boards[] __initconst = {
+	{
+		.matches = { DMI_MATCH(DMI_BOARD_NAME, "8BAB") },
+		.driver_data = (void *)&omen_v1_thermal_params,
+	},
 	{
 		.matches = { DMI_MATCH(DMI_BOARD_NAME, "8BBE") },
 		.driver_data = (void *)&victus_s_thermal_params,
-- 
2.52.0

Re: [PATCH] platform/x86: hp-wmi: Add Omen 16-wf0xxx fan and thermal support

[Ilpo Järvinen]

On Mon, 16 Feb 2026 12:50:03 +0530, Krishna Chomal wrote:

> The HP Omen 16-wf0xxx (board ID: 8BAB) has the same WMI interface as
> other Victus S boards, but requires quirks for correctly switching
> thermal profile (similar to HP Omen 16-wf1xxx, board ID: 8C78).
> 
> Add the DMI board name to victus_s_thermal_profile_boards[] table and
> map it to omen_v1_thermal_params.
> 
> [...]


Thank you for your contribution, it has been applied to my local
review-ilpo-fixes branch. Note it will show up in the public
platform-drivers-x86/review-ilpo-fixes branch only once I've pushed my
local branch there, which might take a while.

The list of commits applied:
[1/1] platform/x86: hp-wmi: Add Omen 16-wf0xxx fan and thermal support
      commit: 13fa3aaf02edaad9b41fc61d7f6326d2b6a4bf80

--
 i.