From: Hans de Goede <hdegoede@redhat.com>
To: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Cc: Andy Shevchenko <andy@kernel.org>, platform-driver-x86@vger.kernel.org
Subject: Re: [PATCH 1/2] platform/x86: x86-android-tablets: Add support for more then 1 gpio_key
Date: Tue, 9 May 2023 11:33:12 +0200 [thread overview]
Message-ID: <73f63b9c-d9c6-6abc-da2f-cc82ff93c58a@redhat.com> (raw)
In-Reply-To: <aa70c911-d4b4-bdd8-66fa-9bcd4e8edcb7@linux.intel.com>
Hi,
On 5/8/23 09:38, Ilpo Järvinen wrote:
> On Fri, 5 May 2023, Hans de Goede wrote:
>
>> Modify the gpio_keys support in x86_android_tablet_init() for
>> tablets which have more then 1 key/button which needs to be handled
>> by the gpio_keys driver.
>>
>> This requires copying over the struct gpio_keys_button from
>> the x86_gpio_button struct array to a new gpio_keys_button struct array,
>> as an added benefit this allows marking the per model x86_gpio_button
>> arrays __initconst so that they all can be freed after module init().
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>> .../platform/x86/x86-android-tablets/asus.c | 4 ++-
>> .../platform/x86/x86-android-tablets/core.c | 33 ++++++++++++-------
>> .../platform/x86/x86-android-tablets/lenovo.c | 6 ++--
>> .../platform/x86/x86-android-tablets/other.c | 6 ++--
>> .../x86-android-tablets/x86-android-tablets.h | 3 +-
>> 5 files changed, 35 insertions(+), 17 deletions(-)
>>
>> diff --git a/drivers/platform/x86/x86-android-tablets/asus.c b/drivers/platform/x86/x86-android-tablets/asus.c
>> index 2aca91678219..f9c4083be86d 100644
>> --- a/drivers/platform/x86/x86-android-tablets/asus.c
>> +++ b/drivers/platform/x86/x86-android-tablets/asus.c
>> @@ -24,7 +24,7 @@ static struct gpiod_lookup_table int3496_gpo2_pin22_gpios = {
>> },
>> };
>>
>> -static struct x86_gpio_button asus_me176c_tf103c_lid = {
>> +static const struct x86_gpio_button asus_me176c_tf103c_lid __initconst = {
>> .button = {
>> .code = SW_LID,
>> .active_low = true,
>> @@ -175,6 +175,7 @@ const struct x86_dev_info asus_me176c_info __initconst = {
>> .serdev_info = asus_me176c_serdevs,
>> .serdev_count = ARRAY_SIZE(asus_me176c_serdevs),
>> .gpio_button = &asus_me176c_tf103c_lid,
>> + .gpio_button_count = 1,
>> .gpiod_lookup_tables = asus_me176c_gpios,
>> .bat_swnode = &generic_lipo_hv_4v35_battery_node,
>> .modules = bq24190_modules,
>> @@ -317,6 +318,7 @@ const struct x86_dev_info asus_tf103c_info __initconst = {
>> .pdev_info = int3496_pdevs,
>> .pdev_count = 1,
>> .gpio_button = &asus_me176c_tf103c_lid,
>> + .gpio_button_count = 1,
>> .gpiod_lookup_tables = asus_tf103c_gpios,
>> .bat_swnode = &asus_tf103c_battery_node,
>> .modules = bq24190_modules,
>> diff --git a/drivers/platform/x86/x86-android-tablets/core.c b/drivers/platform/x86/x86-android-tablets/core.c
>> index 245167674aa2..0c7142f4eccc 100644
>> --- a/drivers/platform/x86/x86-android-tablets/core.c
>> +++ b/drivers/platform/x86/x86-android-tablets/core.c
>> @@ -124,6 +124,7 @@ static int serdev_count;
>> static struct i2c_client **i2c_clients;
>> static struct platform_device **pdevs;
>> static struct serdev_device **serdevs;
>> +static struct gpio_keys_button *buttons;
>> static struct gpiod_lookup_table * const *gpiod_lookup_tables;
>> static const struct software_node *bat_swnode;
>> static void (*exit_handler)(void);
>> @@ -238,6 +239,7 @@ static void x86_android_tablet_cleanup(void)
>> platform_device_unregister(pdevs[i]);
>>
>> kfree(pdevs);
>> + kfree(buttons);
>>
>> for (i = 0; i < i2c_client_count; i++)
>> i2c_unregister_device(i2c_clients[i]);
>> @@ -353,22 +355,31 @@ static __init int x86_android_tablet_init(void)
>> }
>> }
>>
>> - if (dev_info->gpio_button) {
>> - struct gpio_keys_platform_data pdata = {
>> - .buttons = &dev_info->gpio_button->button,
>> - .nbuttons = 1,
>> - };
>> + if (dev_info->gpio_button_count) {
>> + struct gpio_keys_platform_data pdata = { };
>> struct gpio_desc *gpiod;
>>
>> - /* Get GPIO for the gpio-button */
>> - ret = x86_android_tablet_get_gpiod(dev_info->gpio_button->chip,
>> - dev_info->gpio_button->pin, &gpiod);
>> - if (ret < 0) {
>> + buttons = kcalloc(dev_info->gpio_button_count, sizeof(*buttons), GFP_KERNEL);
>> + if (!buttons) {
>> x86_android_tablet_cleanup();
>> - return ret;
>> + return -ENOMEM;
>> + }
>> +
>> + for (i = 0; i < dev_info->gpio_button_count; i++) {
>> + buttons[i] = dev_info->gpio_button[i].button;
>> + /* Get GPIO for the gpio-button */
>> + ret = x86_android_tablet_get_gpiod(dev_info->gpio_button[i].chip,
>> + dev_info->gpio_button[i].pin, &gpiod);
>
> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Thank you.
> With the note that the comment seems to just spell out what the code does
> so it feels useless.
That is a valid note. I've dropped the comment while merging this.
I've added this series to my review-hans (soon to be for-next) branch now.
Regards,
Hans
prev parent reply other threads:[~2023-05-09 9:35 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-05 20:59 [PATCH 1/2] platform/x86: x86-android-tablets: Add support for more then 1 gpio_key Hans de Goede
2023-05-05 20:59 ` [PATCH 2/2] platform/x86: x86-android-tablets: Add support for extra buttons on Cyberbook T116 Hans de Goede
2023-05-06 11:40 ` Andy Shevchenko
2023-05-08 7:38 ` [PATCH 1/2] platform/x86: x86-android-tablets: Add support for more then 1 gpio_key Ilpo Järvinen
2023-05-09 9:33 ` Hans de Goede [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=73f63b9c-d9c6-6abc-da2f-cc82ff93c58a@redhat.com \
--to=hdegoede@redhat.com \
--cc=andy@kernel.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox