From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andy@kernel.org>, platform-driver-x86@vger.kernel.org
Subject: Re: [PATCH 1/2] platform/x86: x86-android-tablets: Add support for more then 1 gpio_key
Date: Mon, 8 May 2023 10:38:12 +0300 (EEST) [thread overview]
Message-ID: <aa70c911-d4b4-bdd8-66fa-9bcd4e8edcb7@linux.intel.com> (raw)
In-Reply-To: <20230505205901.42649-1-hdegoede@redhat.com>
[-- Attachment #1: Type: text/plain, Size: 8834 bytes --]
On Fri, 5 May 2023, Hans de Goede wrote:
> Modify the gpio_keys support in x86_android_tablet_init() for
> tablets which have more then 1 key/button which needs to be handled
> by the gpio_keys driver.
>
> This requires copying over the struct gpio_keys_button from
> the x86_gpio_button struct array to a new gpio_keys_button struct array,
> as an added benefit this allows marking the per model x86_gpio_button
> arrays __initconst so that they all can be freed after module init().
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> .../platform/x86/x86-android-tablets/asus.c | 4 ++-
> .../platform/x86/x86-android-tablets/core.c | 33 ++++++++++++-------
> .../platform/x86/x86-android-tablets/lenovo.c | 6 ++--
> .../platform/x86/x86-android-tablets/other.c | 6 ++--
> .../x86-android-tablets/x86-android-tablets.h | 3 +-
> 5 files changed, 35 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/platform/x86/x86-android-tablets/asus.c b/drivers/platform/x86/x86-android-tablets/asus.c
> index 2aca91678219..f9c4083be86d 100644
> --- a/drivers/platform/x86/x86-android-tablets/asus.c
> +++ b/drivers/platform/x86/x86-android-tablets/asus.c
> @@ -24,7 +24,7 @@ static struct gpiod_lookup_table int3496_gpo2_pin22_gpios = {
> },
> };
>
> -static struct x86_gpio_button asus_me176c_tf103c_lid = {
> +static const struct x86_gpio_button asus_me176c_tf103c_lid __initconst = {
> .button = {
> .code = SW_LID,
> .active_low = true,
> @@ -175,6 +175,7 @@ const struct x86_dev_info asus_me176c_info __initconst = {
> .serdev_info = asus_me176c_serdevs,
> .serdev_count = ARRAY_SIZE(asus_me176c_serdevs),
> .gpio_button = &asus_me176c_tf103c_lid,
> + .gpio_button_count = 1,
> .gpiod_lookup_tables = asus_me176c_gpios,
> .bat_swnode = &generic_lipo_hv_4v35_battery_node,
> .modules = bq24190_modules,
> @@ -317,6 +318,7 @@ const struct x86_dev_info asus_tf103c_info __initconst = {
> .pdev_info = int3496_pdevs,
> .pdev_count = 1,
> .gpio_button = &asus_me176c_tf103c_lid,
> + .gpio_button_count = 1,
> .gpiod_lookup_tables = asus_tf103c_gpios,
> .bat_swnode = &asus_tf103c_battery_node,
> .modules = bq24190_modules,
> diff --git a/drivers/platform/x86/x86-android-tablets/core.c b/drivers/platform/x86/x86-android-tablets/core.c
> index 245167674aa2..0c7142f4eccc 100644
> --- a/drivers/platform/x86/x86-android-tablets/core.c
> +++ b/drivers/platform/x86/x86-android-tablets/core.c
> @@ -124,6 +124,7 @@ static int serdev_count;
> static struct i2c_client **i2c_clients;
> static struct platform_device **pdevs;
> static struct serdev_device **serdevs;
> +static struct gpio_keys_button *buttons;
> static struct gpiod_lookup_table * const *gpiod_lookup_tables;
> static const struct software_node *bat_swnode;
> static void (*exit_handler)(void);
> @@ -238,6 +239,7 @@ static void x86_android_tablet_cleanup(void)
> platform_device_unregister(pdevs[i]);
>
> kfree(pdevs);
> + kfree(buttons);
>
> for (i = 0; i < i2c_client_count; i++)
> i2c_unregister_device(i2c_clients[i]);
> @@ -353,22 +355,31 @@ static __init int x86_android_tablet_init(void)
> }
> }
>
> - if (dev_info->gpio_button) {
> - struct gpio_keys_platform_data pdata = {
> - .buttons = &dev_info->gpio_button->button,
> - .nbuttons = 1,
> - };
> + if (dev_info->gpio_button_count) {
> + struct gpio_keys_platform_data pdata = { };
> struct gpio_desc *gpiod;
>
> - /* Get GPIO for the gpio-button */
> - ret = x86_android_tablet_get_gpiod(dev_info->gpio_button->chip,
> - dev_info->gpio_button->pin, &gpiod);
> - if (ret < 0) {
> + buttons = kcalloc(dev_info->gpio_button_count, sizeof(*buttons), GFP_KERNEL);
> + if (!buttons) {
> x86_android_tablet_cleanup();
> - return ret;
> + return -ENOMEM;
> + }
> +
> + for (i = 0; i < dev_info->gpio_button_count; i++) {
> + buttons[i] = dev_info->gpio_button[i].button;
> + /* Get GPIO for the gpio-button */
> + ret = x86_android_tablet_get_gpiod(dev_info->gpio_button[i].chip,
> + dev_info->gpio_button[i].pin, &gpiod);
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
With the note that the comment seems to just spell out what the code does
so it feels useless.
--
i.
> + if (ret < 0) {
> + x86_android_tablet_cleanup();
> + return ret;
> + }
> +
> + buttons[i].gpio = desc_to_gpio(gpiod);
> }
>
> - dev_info->gpio_button->button.gpio = desc_to_gpio(gpiod);
> + pdata.buttons = buttons;
> + pdata.nbuttons = dev_info->gpio_button_count;
>
> pdevs[pdev_count] = platform_device_register_data(NULL, "gpio-keys",
> PLATFORM_DEVID_AUTO,
> diff --git a/drivers/platform/x86/x86-android-tablets/lenovo.c b/drivers/platform/x86/x86-android-tablets/lenovo.c
> index 50031e902a2c..26a4ef670ad7 100644
> --- a/drivers/platform/x86/x86-android-tablets/lenovo.c
> +++ b/drivers/platform/x86/x86-android-tablets/lenovo.c
> @@ -160,7 +160,7 @@ static const struct x86_serdev_info lenovo_yb1_x90_serdevs[] __initconst = {
> },
> };
>
> -static struct x86_gpio_button lenovo_yb1_x90_lid = {
> +static const struct x86_gpio_button lenovo_yb1_x90_lid __initconst = {
> .button = {
> .code = SW_LID,
> .active_low = true,
> @@ -232,6 +232,7 @@ const struct x86_dev_info lenovo_yogabook_x90_info __initconst = {
> .serdev_info = lenovo_yb1_x90_serdevs,
> .serdev_count = ARRAY_SIZE(lenovo_yb1_x90_serdevs),
> .gpio_button = &lenovo_yb1_x90_lid,
> + .gpio_button_count = 1,
> .gpiod_lookup_tables = lenovo_yb1_x90_gpios,
> .init = lenovo_yb1_x90_init,
> };
> @@ -268,7 +269,7 @@ static const struct software_node lenovo_yoga_tab2_830_1050_bq24190_node = {
> .properties = lenovo_yoga_tab2_830_1050_bq24190_props,
> };
>
> -static struct x86_gpio_button lenovo_yoga_tab2_830_1050_lid = {
> +static const struct x86_gpio_button lenovo_yoga_tab2_830_1050_lid __initconst = {
> .button = {
> .code = SW_LID,
> .active_low = true,
> @@ -394,6 +395,7 @@ const struct x86_dev_info lenovo_yoga_tab2_830_1050_info __initconst = {
> .pdev_info = int3496_pdevs,
> .pdev_count = 1,
> .gpio_button = &lenovo_yoga_tab2_830_1050_lid,
> + .gpio_button_count = 1,
> .gpiod_lookup_tables = lenovo_yoga_tab2_830_1050_gpios,
> .bat_swnode = &generic_lipo_hv_4v35_battery_node,
> .modules = bq24190_modules,
> diff --git a/drivers/platform/x86/x86-android-tablets/other.c b/drivers/platform/x86/x86-android-tablets/other.c
> index 3754d2453cdb..4d54c89e6ca2 100644
> --- a/drivers/platform/x86/x86-android-tablets/other.c
> +++ b/drivers/platform/x86/x86-android-tablets/other.c
> @@ -94,7 +94,7 @@ const struct x86_dev_info acer_b1_750_info __initconst = {
> * which is not described in the ACPI tables in anyway.
> * Use the x86-android-tablets infra to create a gpio-button device for this.
> */
> -static struct x86_gpio_button advantech_mica_071_button = {
> +static const struct x86_gpio_button advantech_mica_071_button __initconst = {
> .button = {
> .code = KEY_PROG1,
> .active_low = true,
> @@ -109,6 +109,7 @@ static struct x86_gpio_button advantech_mica_071_button = {
>
> const struct x86_dev_info advantech_mica_071_info __initconst = {
> .gpio_button = &advantech_mica_071_button,
> + .gpio_button_count = 1,
> };
>
> /*
> @@ -449,7 +450,7 @@ const struct x86_dev_info nextbook_ares8a_info __initconst = {
> * This button has a WMI interface, but that is broken. Instead of trying to
> * use the broken WMI interface, instantiate a gpio_keys device for this.
> */
> -static struct x86_gpio_button peaq_c1010_button = {
> +static const struct x86_gpio_button peaq_c1010_button __initconst = {
> .button = {
> .code = KEY_SOUND,
> .active_low = true,
> @@ -464,6 +465,7 @@ static struct x86_gpio_button peaq_c1010_button = {
>
> const struct x86_dev_info peaq_c1010_info __initconst = {
> .gpio_button = &peaq_c1010_button,
> + .gpio_button_count = 1,
> /*
> * Move the ACPI event handler used by the broken WMI interface out of
> * the way. This is the only event handler on INT33FC:00.
> diff --git a/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h b/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h
> index 8e9f7238015c..8f04a052eada 100644
> --- a/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h
> +++ b/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h
> @@ -73,10 +73,11 @@ struct x86_dev_info {
> const struct x86_i2c_client_info *i2c_client_info;
> const struct platform_device_info *pdev_info;
> const struct x86_serdev_info *serdev_info;
> - struct x86_gpio_button *gpio_button;
> + const struct x86_gpio_button *gpio_button;
> int i2c_client_count;
> int pdev_count;
> int serdev_count;
> + int gpio_button_count;
> int (*init)(void);
> void (*exit)(void);
> };
>
next prev parent reply other threads:[~2023-05-08 7:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-05 20:59 [PATCH 1/2] platform/x86: x86-android-tablets: Add support for more then 1 gpio_key Hans de Goede
2023-05-05 20:59 ` [PATCH 2/2] platform/x86: x86-android-tablets: Add support for extra buttons on Cyberbook T116 Hans de Goede
2023-05-06 11:40 ` Andy Shevchenko
2023-05-08 7:38 ` Ilpo Järvinen [this message]
2023-05-09 9:33 ` [PATCH 1/2] platform/x86: x86-android-tablets: Add support for more then 1 gpio_key Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aa70c911-d4b4-bdd8-66fa-9bcd4e8edcb7@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=andy@kernel.org \
--cc=hdegoede@redhat.com \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox