From: "Mark Pearson" <mpearson-lenovo@squebb.ca>
To: "Dmitry Torokhov" <dmitry.torokhov@gmail.com>,
"Derek J . Clark" <derekjohn.clark@gmail.com>
Cc: "Henrique de Moraes Holschuh" <hmh@hmh.eng.br>,
"Hans de Goede" <hansg@kernel.org>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
"Nitin Joshi" <nitjoshi@gmail.com>,
"platform-driver-x86@vger.kernel.org"
<platform-driver-x86@vger.kernel.org>,
ibm-acpi-devel@lists.sourceforge.net,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/3] platform/x86: thinkpad_acpi: convert mutex_lock() to guard(mutex)
Date: Wed, 12 Aug 2026 14:29:13 -0400 [thread overview]
Message-ID: <7a924f0a-0afb-4ae0-a106-37cdc76836bd@app.fastmail.com> (raw)
In-Reply-To: <20260806061925.625482-1-dmitry.torokhov@gmail.com>
Thanks Dmitry,
On Thu, Aug 6, 2026, at 2:19 AM, Dmitry Torokhov wrote:
> Convert straightforward mutex_lock() and mutex_unlock() usages for
> hotkey_mutex, tpacpi_inputdev_send_mutex, kbdlight_mutex, lcdshadow_dev
> lock, and dytc_mutex to guard(mutex) and scoped_guard(mutex) helpers
> from linux/cleanup.h.
>
> This improves code readability and ensures that mutexes are
> automatically released when exiting their respective scopes.
>
> Assisted-by: Antigravity:gemini-3.6-flash
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
> drivers/platform/x86/lenovo/thinkpad_acpi.c | 139 ++++++++------------
> 1 file changed, 57 insertions(+), 82 deletions(-)
>
> diff --git a/drivers/platform/x86/lenovo/thinkpad_acpi.c
> b/drivers/platform/x86/lenovo/thinkpad_acpi.c
> index f8e116e8a65d..beb85ea1103b 100644
> --- a/drivers/platform/x86/lenovo/thinkpad_acpi.c
> +++ b/drivers/platform/x86/lenovo/thinkpad_acpi.c
> @@ -2164,7 +2164,7 @@ static int tpacpi_hotkey_driver_mask_set(const
> u32 mask)
> return 0;
> }
>
> - mutex_lock(&hotkey_mutex);
> + guard(mutex)(&hotkey_mutex);
>
> HOTKEY_CONFIG_CRITICAL_START
> hotkey_driver_mask = mask;
> @@ -2177,8 +2177,6 @@ static int tpacpi_hotkey_driver_mask_set(const u32 mask)
> ~hotkey_source_mask);
> hotkey_poll_setup(true);
>
> - mutex_unlock(&hotkey_mutex);
> -
> return rc;
> }
>
> @@ -2202,15 +2200,12 @@ static void tpacpi_input_send_tabletsw(void)
> {
> int state;
>
> - if (tp_features.hotkey_tablet &&
> - !hotkey_get_tablet_mode(&state)) {
> - mutex_lock(&tpacpi_inputdev_send_mutex);
> + if (tp_features.hotkey_tablet && !hotkey_get_tablet_mode(&state)) {
> + guard(mutex)(&tpacpi_inputdev_send_mutex);
>
> input_report_switch(tpacpi_inputdev,
> SW_TABLET_MODE, !!state);
> input_sync(tpacpi_inputdev);
> -
> - mutex_unlock(&tpacpi_inputdev_send_mutex);
> }
> }
>
> @@ -2235,7 +2230,6 @@ static int get_camera_shutter(void)
>
> static bool tpacpi_input_send_key(const u32 hkey, bool *send_acpi_ev)
> {
> - bool known_ev;
> u32 scancode;
>
> if (tpacpi_driver_event(hkey))
> @@ -2278,11 +2272,8 @@ static bool tpacpi_input_send_key(const u32
> hkey, bool *send_acpi_ev)
> scancode = hkey;
> }
>
> - mutex_lock(&tpacpi_inputdev_send_mutex);
> - known_ev = sparse_keymap_report_event(tpacpi_inputdev, scancode, 1, true);
> - mutex_unlock(&tpacpi_inputdev_send_mutex);
> -
> - return known_ev;
> + guard(mutex)(&tpacpi_inputdev_send_mutex);
> + return sparse_keymap_report_event(tpacpi_inputdev, scancode, 1, true);
> }
>
> #ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
> @@ -2572,9 +2563,8 @@ static void hotkey_poll_setup(const bool may_warn)
>
> static void hotkey_poll_setup_safe(const bool may_warn)
> {
> - mutex_lock(&hotkey_mutex);
> + guard(mutex)(&hotkey_mutex);
> hotkey_poll_setup(may_warn);
> - mutex_unlock(&hotkey_mutex);
> }
>
> static void hotkey_poll_set_freq(unsigned int freq)
> @@ -3077,13 +3067,11 @@ static void tpacpi_send_radiosw_update(void)
>
> /* Issue rfkill input event for WLSW switch */
> if (!(wlsw < 0)) {
> - mutex_lock(&tpacpi_inputdev_send_mutex);
> + guard(mutex)(&tpacpi_inputdev_send_mutex);
>
> input_report_switch(tpacpi_inputdev,
> SW_RFKILL_ALL, (wlsw > 0));
> input_sync(tpacpi_inputdev);
> -
> - mutex_unlock(&tpacpi_inputdev_send_mutex);
> }
>
> /*
> @@ -3095,7 +3083,7 @@ static void tpacpi_send_radiosw_update(void)
>
> static void hotkey_exit(void)
> {
> - mutex_lock(&hotkey_mutex);
> + guard(mutex)(&hotkey_mutex);
> hotkey_poll_stop_sync();
> dbg_printk(TPACPI_DBG_EXIT | TPACPI_DBG_HKEY,
> "restoring original HKEY status and mask\n");
> @@ -3105,8 +3093,6 @@ static void hotkey_exit(void)
> hotkey_mask_set(hotkey_orig_mask)) |
> hotkey_status_set(false)) != 0)
> pr_err("failed to restore hot key mask to BIOS defaults\n");
> -
> - mutex_unlock(&hotkey_mutex);
> }
>
> /*
> @@ -3423,11 +3409,11 @@ static int __init hotkey_init(struct
> ibm_init_struct *iibm)
> if (tp_features.hotkey_mask) {
> /* hotkey_source_mask *must* be zero for
> * the first hotkey_mask_get to return hotkey_orig_mask */
> - mutex_lock(&hotkey_mutex);
> - res = hotkey_mask_get();
> - mutex_unlock(&hotkey_mutex);
> - if (res)
> - return res;
> + scoped_guard(mutex, &hotkey_mutex) {
> + res = hotkey_mask_get();
> + if (res)
> + return res;
> + }
>
> hotkey_orig_mask = hotkey_acpi_mask;
> } else {
> @@ -3526,11 +3512,11 @@ static int __init hotkey_init(struct
> ibm_init_struct *iibm)
> hotkey_exit();
> return res;
> }
> - mutex_lock(&hotkey_mutex);
> - res = hotkey_mask_set(((hotkey_all_mask & ~hotkey_reserved_mask)
> - | hotkey_driver_mask)
> - & ~hotkey_source_mask);
> - mutex_unlock(&hotkey_mutex);
> + scoped_guard(mutex, &hotkey_mutex) {
> + res = hotkey_mask_set(((hotkey_all_mask & ~hotkey_reserved_mask)
> + | hotkey_driver_mask)
> + & ~hotkey_source_mask);
> + }
> if (res < 0 && res != -ENXIO) {
> hotkey_exit();
> return res;
> @@ -3977,11 +3963,11 @@ static void hotkey_resume(void)
> {
> tpacpi_disable_brightness_delay();
>
> - mutex_lock(&hotkey_mutex);
> - if (hotkey_status_set(true) < 0 ||
> - hotkey_mask_set(hotkey_acpi_mask) < 0)
> - pr_err("error while attempting to reset the event firmware interface\n");
> - mutex_unlock(&hotkey_mutex);
> + scoped_guard(mutex, &hotkey_mutex) {
> + if (hotkey_status_set(true) < 0 ||
> + hotkey_mask_set(hotkey_acpi_mask) < 0)
> + pr_err("error while attempting to reset the event firmware interface\n");
> + }
>
> tpacpi_send_radiosw_update();
> tpacpi_input_send_tabletsw();
> @@ -5034,21 +5020,16 @@ static DEFINE_MUTEX(kbdlight_mutex);
>
> static int kbdlight_set_level(int level)
> {
> - int ret = 0;
> -
> if (!hkey_handle)
> return -ENXIO;
>
> - mutex_lock(&kbdlight_mutex);
> + guard(mutex)(&kbdlight_mutex);
>
> if (!acpi_evalf(hkey_handle, NULL, "MLCS", "dd", level))
> - ret = -EIO;
> - else
> - kbdlight_brightness = level;
> -
> - mutex_unlock(&kbdlight_mutex);
> + return -EIO;
>
> - return ret;
> + kbdlight_brightness = level;
> + return 0;
> }
>
> static int kbdlight_get_level(void)
> @@ -10103,9 +10084,8 @@ static void lcdshadow_resume(void)
> if (!lcdshadow_dev)
> return;
>
> - mutex_lock(&lcdshadow_dev->lock);
> + guard(mutex)(&lcdshadow_dev->lock);
> lcdshadow_set_sw_state(lcdshadow_dev, lcdshadow_dev->sw_state);
> - mutex_unlock(&lcdshadow_dev->lock);
> }
>
> static int lcdshadow_read(struct seq_file *m)
> @@ -10137,9 +10117,8 @@ static int lcdshadow_write(char *buf)
> if (state >= 2 || state < 0)
> return -EINVAL;
>
> - mutex_lock(&lcdshadow_dev->lock);
> - res = lcdshadow_set_sw_state(lcdshadow_dev, state);
> - mutex_unlock(&lcdshadow_dev->lock);
> + scoped_guard(mutex, &lcdshadow_dev->lock)
> + res = lcdshadow_set_sw_state(lcdshadow_dev, state);
>
> drm_privacy_screen_call_notifier_chain(lcdshadow_dev);
>
> @@ -10603,26 +10582,26 @@ static const struct platform_profile_ops
> dytc_profile_ops = {
> static void dytc_profile_refresh(void)
> {
> enum platform_profile_option profile;
> - int output = 0, err = 0;
> + int output = 0, err;
> int perfmode, funcmode = 0;
>
> - mutex_lock(&dytc_mutex);
> - if (dytc_capabilities & BIT(DYTC_FC_MMC)) {
> - if (dytc_mmc_get_available)
> - err = dytc_command(DYTC_CMD_MMC_GET, &output);
> - else
> - err = dytc_cql_command(DYTC_CMD_GET, &output);
> - funcmode = DYTC_FUNCTION_MMC;
> - } else if (dytc_capabilities & BIT(DYTC_FC_PSC)) {
> - err = dytc_command(DYTC_CMD_GET, &output);
> - /* Check if we are PSC mode, or have AMT enabled */
> - funcmode = (output >> DYTC_GET_FUNCTION_BIT) & 0xF;
> - } else { /* Unknown profile mode */
> - err = -ENODEV;
> + scoped_guard(mutex, &dytc_mutex) {
> + if (dytc_capabilities & BIT(DYTC_FC_MMC)) {
> + if (dytc_mmc_get_available)
> + err = dytc_command(DYTC_CMD_MMC_GET, &output);
> + else
> + err = dytc_cql_command(DYTC_CMD_GET, &output);
> + funcmode = DYTC_FUNCTION_MMC;
> + } else if (dytc_capabilities & BIT(DYTC_FC_PSC)) {
> + err = dytc_command(DYTC_CMD_GET, &output);
> + /* Check if we are PSC mode, or have AMT enabled */
> + funcmode = (output >> DYTC_GET_FUNCTION_BIT) & 0xF;
> + } else { /* Unknown profile mode */
> + err = -ENODEV;
> + }
> + if (err)
> + return;
> }
> - mutex_unlock(&dytc_mutex);
> - if (err)
> - return;
>
> perfmode = (output >> DYTC_GET_MODE_BIT) & 0xF;
> err = convert_dytc_to_profile(funcmode, perfmode, &profile);
> @@ -11425,7 +11404,7 @@ static bool tpacpi_driver_event(const unsigned
> int hkey_event)
> if (tp_features.kbdlight) {
> enum led_brightness brightness;
>
> - mutex_lock(&kbdlight_mutex);
> + guard(mutex)(&kbdlight_mutex);
>
> /*
> * Check the brightness actually changed, setting the brightness
> @@ -11437,8 +11416,6 @@ static bool tpacpi_driver_event(const unsigned
> int hkey_event)
> led_classdev_notify_brightness_hw_changed(
> &tpacpi_led_kbdlight.led_classdev, brightness);
> }
> -
> - mutex_unlock(&kbdlight_mutex);
> }
> /* Key events are suppressed by default hotkey_user_mask */
> return false;
> @@ -11460,11 +11437,11 @@ static bool tpacpi_driver_event(const
> unsigned int hkey_event)
> enum drm_privacy_screen_status old_hw_state;
> bool changed;
>
> - mutex_lock(&lcdshadow_dev->lock);
> - old_hw_state = lcdshadow_dev->hw_state;
> - lcdshadow_get_hw_state(lcdshadow_dev);
> - changed = lcdshadow_dev->hw_state != old_hw_state;
> - mutex_unlock(&lcdshadow_dev->lock);
> + scoped_guard(mutex, &lcdshadow_dev->lock) {
> + old_hw_state = lcdshadow_dev->hw_state;
> + lcdshadow_get_hw_state(lcdshadow_dev);
> + changed = lcdshadow_dev->hw_state != old_hw_state;
> + }
>
> if (changed)
> drm_privacy_screen_call_notifier_chain(lcdshadow_dev);
> @@ -11485,12 +11462,10 @@ static bool tpacpi_driver_event(const
> unsigned int hkey_event)
> pr_err("Error retrieving camera shutter state after shutter
> event\n");
> return true;
> }
> - mutex_lock(&tpacpi_inputdev_send_mutex);
> -
> - input_report_switch(tpacpi_inputdev, SW_CAMERA_LENS_COVER,
> camera_shutter_state);
> - input_sync(tpacpi_inputdev);
> -
> - mutex_unlock(&tpacpi_inputdev_send_mutex);
> + scoped_guard(mutex, &tpacpi_inputdev_send_mutex) {
> + input_report_switch(tpacpi_inputdev, SW_CAMERA_LENS_COVER,
> camera_shutter_state);
> + input_sync(tpacpi_inputdev);
> + }
> return true;
> case TP_HKEY_EV_DOUBLETAP_TOGGLE:
> /* Toggle kernel-level doubletap event filtering */
> --
> 2.55.0.679.g6767b8d81c-goog
Sorry, took me a while to get to this one.
Changes look good, nice cleanup.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Mark
next prev parent reply other threads:[~2026-08-12 18:29 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-06 6:19 [PATCH 1/3] platform/x86: thinkpad_acpi: convert mutex_lock() to guard(mutex) Dmitry Torokhov
2026-08-06 6:19 ` [PATCH 2/3] platform/x86: thinkpad_acpi: convert conditional mutex locks to ACQUIRE_ERR() Dmitry Torokhov
2026-08-12 18:53 ` Mark Pearson
2026-09-06 13:10 ` Ali Ahmet Memiş
2026-08-06 6:19 ` [PATCH 3/3] platform/x86: thinkpad_acpi: use __free(kfree) for automatic cleanup Dmitry Torokhov
2026-08-12 19:02 ` Mark Pearson
2026-09-06 13:10 ` Ali Ahmet Memiş
2026-08-12 18:29 ` Mark Pearson [this message]
2026-08-12 19:55 ` [ibm-acpi-devel] [PATCH 1/3] platform/x86: thinkpad_acpi: convert mutex_lock() to guard(mutex) Mark Pearson
2026-09-06 13:10 ` Ali Ahmet Memiş
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7a924f0a-0afb-4ae0-a106-37cdc76836bd@app.fastmail.com \
--to=mpearson-lenovo@squebb.ca \
--cc=derekjohn.clark@gmail.com \
--cc=dmitry.torokhov@gmail.com \
--cc=hansg@kernel.org \
--cc=hmh@hmh.eng.br \
--cc=ibm-acpi-devel@lists.sourceforge.net \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=nitjoshi@gmail.com \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox