From: Gary Thomas <gary@mlbassoc.com>
To: Koen Kooi <koen@dominion.thruhere.net>
Cc: Poky <poky@lists.pokylinux.org>
Subject: Re: Booting BeagleBoard
Date: Sun, 13 Feb 2011 08:06:32 -0700 [thread overview]
Message-ID: <4D57F378.90406@mlbassoc.com> (raw)
In-Reply-To: <59686AEF-1509-4F1B-B722-66D2465E274F@dominion.thruhere.net>
On 02/13/2011 08:00 AM, Koen Kooi wrote:
>
> Op 13 feb 2011, om 15:57 heeft Gary Thomas het volgende geschreven:
>
>> On 02/12/2011 08:01 AM, Koen Kooi wrote:
>>>
>>> Op 12 feb 2011, om 15:52 heeft Gary Thomas het volgende geschreven:
>>>
>>>> I have a BeagleBoard C3 (not the new xM). Trying to run the
>>>> latest Poky ran into some problems:
>>>>
>>>> * The boot commands in README.hardware are no longer accurate
>>>> for the 2.6.37 (linux-yocto) kernel. At least you need to
>>>> use ttyO2 for the serial console.
>>>> * There is no video? /dev/fb0 is not being created.
>>>>
>>>> I know that the previous (Angstrom based) 2.6.32 kernel had
>>>> lots of additions which support video (DSS subsystem) and
>>>> also camera (ISP). Has this support been ported forward
>>>> into the Yocto kernel?
>>>
>>> Even better, there is a proper BSP with beagleboard support: http://gitorious.org/angstrom/angstrom-layers/commits/master
>>
>> How is this used? I tried just adding a pointer to that tree
>> in my conf/bblayers.conf. I also tried moving that tree into
>> my poky sources at the same level as meta-emenlow, etc. Both
>> attempts immediately yielded this error:
>> ERROR: Unable to parse conf/bitbake.conf: Could not include required file conf/machine/include/omap3.inc
>>
>> Perhaps you can give some guidance for how to use this?
>
> http://thread.gmane.org/gmane.linux.distributions.angstrom.devel/4698/focus=4700
Obviously this is not what I'm looking for.
What I had wanted to test was your layering on top of my extant
Poky/Yocto environment. I don't want to start over as I have my
own layers that work just fine with Poky.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
next prev parent reply other threads:[~2011-02-13 15:06 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-12 14:52 Booting BeagleBoard Gary Thomas
2011-02-12 14:55 ` Gary Thomas
2011-02-14 16:34 ` Darren Hart
2011-02-12 15:01 ` Koen Kooi
2011-02-13 14:57 ` Gary Thomas
2011-02-13 15:00 ` Koen Kooi
2011-02-13 15:06 ` Gary Thomas [this message]
2011-02-13 15:21 ` Koen Kooi
2011-02-13 15:32 ` Gary Thomas
2011-02-13 18:14 ` Frans Meulenbroeks
2011-02-14 12:35 ` Richard Purdie
2011-02-14 13:23 ` Frans Meulenbroeks
2011-02-13 1:21 ` Bruce Ashfield
2011-02-14 16:32 ` Darren Hart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D57F378.90406@mlbassoc.com \
--to=gary@mlbassoc.com \
--cc=koen@dominion.thruhere.net \
--cc=poky@lists.pokylinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox