Poky Project Discussions
 help / color / mirror / Atom feed
* [PATCH 0/3] /etc/network/interfaces updates
@ 2011-04-15 17:00 Paul Eggleton
  2011-04-15 17:00 ` [PATCH 1/3] netbase: automatically bring up eth0 Paul Eggleton
                   ` (2 more replies)
  0 siblings, 3 replies; 13+ messages in thread
From: Paul Eggleton @ 2011-04-15 17:00 UTC (permalink / raw)
  To: openembedded-core, poky

From: Paul Eggleton <paul.eggleton@linux.intel.com>

Some fixes for /etc/network/interfaces.

Pull URL: git://git.openembedded.org/openembedded-core-contrib
  Branch: paule/netbase-fixes
  Browse: http://git.openembedded.org/cgit.cgi/openembedded-core-contrib/log/?h=paule/netbase-fixes

Thanks,
    Paul Eggleton <paul.eggleton@linux.intel.com>
---


Paul Eggleton (3):
  netbase: automatically bring up eth0
  netbase: automatically bring up usb0 on beagleboard
  netbase: add /etc/network/interfaces file for qemumips & qemuppc

 .../netbase/netbase-4.45/beagleboard/interfaces    |   27 ++++++++++++++++++++
 meta/recipes-core/netbase/netbase-4.45/interfaces  |    1 +
 .../netbase/netbase-4.45/qemumips/interfaces       |    8 ++++++
 .../netbase/netbase-4.45/qemuppc/interfaces        |    8 ++++++
 4 files changed, 44 insertions(+), 0 deletions(-)
 create mode 100644 meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces
 create mode 100644 meta/recipes-core/netbase/netbase-4.45/qemumips/interfaces
 create mode 100644 meta/recipes-core/netbase/netbase-4.45/qemuppc/interfaces



^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH 1/3] netbase: automatically bring up eth0
  2011-04-15 17:00 [PATCH 0/3] /etc/network/interfaces updates Paul Eggleton
@ 2011-04-15 17:00 ` Paul Eggleton
  2011-04-15 17:00 ` [PATCH 2/3] netbase: automatically bring up usb0 on beagleboard Paul Eggleton
  2011-04-15 17:00 ` [PATCH 3/3] netbase: add /etc/network/interfaces file for qemumips & qemuppc Paul Eggleton
  2 siblings, 0 replies; 13+ messages in thread
From: Paul Eggleton @ 2011-04-15 17:00 UTC (permalink / raw)
  To: openembedded-core, poky

From: Paul Eggleton <paul.eggleton@linux.intel.com>

This avoids manual configuration for those machines that do not override
the default /etc/network/interfaces file.

Fixes [YOCTO #875]

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
---
 meta/recipes-core/netbase/netbase-4.45/interfaces |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/meta/recipes-core/netbase/netbase-4.45/interfaces b/meta/recipes-core/netbase/netbase-4.45/interfaces
index b06924f..0acf4cf 100644
--- a/meta/recipes-core/netbase/netbase-4.45/interfaces
+++ b/meta/recipes-core/netbase/netbase-4.45/interfaces
@@ -14,6 +14,7 @@ iface wlan0 inet dhcp
 iface atml0 inet dhcp
 
 # Wired or wireless interfaces
+auto eth0
 iface eth0 inet dhcp
 iface eth1 inet dhcp
 
-- 
1.7.1



^ permalink raw reply related	[flat|nested] 13+ messages in thread

* [PATCH 2/3] netbase: automatically bring up usb0 on beagleboard
  2011-04-15 17:00 [PATCH 0/3] /etc/network/interfaces updates Paul Eggleton
  2011-04-15 17:00 ` [PATCH 1/3] netbase: automatically bring up eth0 Paul Eggleton
@ 2011-04-15 17:00 ` Paul Eggleton
  2011-04-15 18:26   ` Saul Wold
  2011-04-15 22:37   ` Darren Hart
  2011-04-15 17:00 ` [PATCH 3/3] netbase: add /etc/network/interfaces file for qemumips & qemuppc Paul Eggleton
  2 siblings, 2 replies; 13+ messages in thread
From: Paul Eggleton @ 2011-04-15 17:00 UTC (permalink / raw)
  To: openembedded-core, poky

From: Paul Eggleton <paul.eggleton@linux.intel.com>

Avoids manual configuration of the BeagleBoard xM's ethernet port (which
shows up as usb0).

Fixes [YOCTO #930]

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
---
 .../netbase/netbase-4.45/beagleboard/interfaces    |   27 ++++++++++++++++++++
 1 files changed, 27 insertions(+), 0 deletions(-)
 create mode 100644 meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces

diff --git a/meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces b/meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces
new file mode 100644
index 0000000..b6935c1
--- /dev/null
+++ b/meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces
@@ -0,0 +1,27 @@
+# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
+ 
+# The loopback interface
+auto lo
+iface lo inet loopback
+
+# Wireless interfaces
+iface wlan0 inet dhcp
+	wireless_mode managed
+	wireless_essid any
+	wpa-driver wext
+	wpa-conf /etc/wpa_supplicant.conf
+
+iface atml0 inet dhcp
+
+# Wired or wireless interfaces
+auto eth0
+iface eth0 inet dhcp
+iface eth1 inet dhcp
+
+# Ethernet/RNDIS gadget (g_ether) or LAN9514 on BeagleBoard xM
+auto usb0
+iface usb0 inet dhcp
+
+# Bluetooth networking
+iface bnep0 inet dhcp
+
-- 
1.7.1



^ permalink raw reply related	[flat|nested] 13+ messages in thread

* [PATCH 3/3] netbase: add /etc/network/interfaces file for qemumips & qemuppc
  2011-04-15 17:00 [PATCH 0/3] /etc/network/interfaces updates Paul Eggleton
  2011-04-15 17:00 ` [PATCH 1/3] netbase: automatically bring up eth0 Paul Eggleton
  2011-04-15 17:00 ` [PATCH 2/3] netbase: automatically bring up usb0 on beagleboard Paul Eggleton
@ 2011-04-15 17:00 ` Paul Eggleton
  2 siblings, 0 replies; 13+ messages in thread
From: Paul Eggleton @ 2011-04-15 17:00 UTC (permalink / raw)
  To: openembedded-core, poky

From: Paul Eggleton <paul.eggleton@linux.intel.com>

This fixes the network configuration for qemumips & qemuppc to match the
other qemu* machines.

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
---
 .../netbase/netbase-4.45/qemumips/interfaces       |    8 ++++++++
 .../netbase/netbase-4.45/qemuppc/interfaces        |    8 ++++++++
 2 files changed, 16 insertions(+), 0 deletions(-)
 create mode 100644 meta/recipes-core/netbase/netbase-4.45/qemumips/interfaces
 create mode 100644 meta/recipes-core/netbase/netbase-4.45/qemuppc/interfaces

diff --git a/meta/recipes-core/netbase/netbase-4.45/qemumips/interfaces b/meta/recipes-core/netbase/netbase-4.45/qemumips/interfaces
new file mode 100644
index 0000000..f62b9a8
--- /dev/null
+++ b/meta/recipes-core/netbase/netbase-4.45/qemumips/interfaces
@@ -0,0 +1,8 @@
+# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
+ 
+# The loopback interface
+auto lo
+iface lo inet loopback
+
+
+
diff --git a/meta/recipes-core/netbase/netbase-4.45/qemuppc/interfaces b/meta/recipes-core/netbase/netbase-4.45/qemuppc/interfaces
new file mode 100644
index 0000000..f62b9a8
--- /dev/null
+++ b/meta/recipes-core/netbase/netbase-4.45/qemuppc/interfaces
@@ -0,0 +1,8 @@
+# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
+ 
+# The loopback interface
+auto lo
+iface lo inet loopback
+
+
+
-- 
1.7.1



^ permalink raw reply related	[flat|nested] 13+ messages in thread

* Re: [PATCH 2/3] netbase: automatically bring up usb0 on beagleboard
  2011-04-15 17:00 ` [PATCH 2/3] netbase: automatically bring up usb0 on beagleboard Paul Eggleton
@ 2011-04-15 18:26   ` Saul Wold
  2011-04-16  4:31     ` Koen Kooi
  2011-04-18  9:17     ` Paul Eggleton
  2011-04-15 22:37   ` Darren Hart
  1 sibling, 2 replies; 13+ messages in thread
From: Saul Wold @ 2011-04-15 18:26 UTC (permalink / raw)
  To: Paul Eggleton; +Cc: poky, openembedded-core

On 04/15/2011 10:00 AM, Paul Eggleton wrote:
> From: Paul Eggleton<paul.eggleton@linux.intel.com>
>
> Avoids manual configuration of the BeagleBoard xM's ethernet port (which
> shows up as usb0).
>
> Fixes [YOCTO #930]
>
> Signed-off-by: Paul Eggleton<paul.eggleton@linux.intel.com>
> ---
>   .../netbase/netbase-4.45/beagleboard/interfaces    |   27 ++++++++++++++++++++
>   1 files changed, 27 insertions(+), 0 deletions(-)
>   create mode 100644 meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces
>
I know this time would come!

So this is up for discussion in a big way!

There was some initial discussion at ELC this last week about what goes 
where and how layers are going to work moving forward.  I know that we 
are committed to the qemu* machines in oe-core (meta), and that 
currently meta-yocto contains a set of core HW (beagleboard among them), 
so the question then is should the HW specific stuff, such as this patch 
move to meta-yocto or some other layer?  There are a couple other 
recipes such as x-load and formfactor that contain HW specific files.

I believe and others will have to confirm this, that some distros may 
want to use these core files, but not via meta-yocto as a layer, or do 
those distros have these files modified differently (ie, not just 
copies, which would be bad).

This is all food for thought.

Sau!


> diff --git a/meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces b/meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces
> new file mode 100644
> index 0000000..b6935c1
> --- /dev/null
> +++ b/meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces
> @@ -0,0 +1,27 @@
> +# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
> +
> +# The loopback interface
> +auto lo
> +iface lo inet loopback
> +
> +# Wireless interfaces
> +iface wlan0 inet dhcp
> +	wireless_mode managed
> +	wireless_essid any
> +	wpa-driver wext
> +	wpa-conf /etc/wpa_supplicant.conf
> +
> +iface atml0 inet dhcp
> +
> +# Wired or wireless interfaces
> +auto eth0
> +iface eth0 inet dhcp
> +iface eth1 inet dhcp
> +
> +# Ethernet/RNDIS gadget (g_ether) or LAN9514 on BeagleBoard xM
> +auto usb0
> +iface usb0 inet dhcp
> +
> +# Bluetooth networking
> +iface bnep0 inet dhcp
> +



^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH 2/3] netbase: automatically bring up usb0 on beagleboard
  2011-04-15 17:00 ` [PATCH 2/3] netbase: automatically bring up usb0 on beagleboard Paul Eggleton
  2011-04-15 18:26   ` Saul Wold
@ 2011-04-15 22:37   ` Darren Hart
  2011-04-15 22:43     ` Gary Thomas
  1 sibling, 1 reply; 13+ messages in thread
From: Darren Hart @ 2011-04-15 22:37 UTC (permalink / raw)
  To: Paul Eggleton; +Cc: poky, openembedded-core



On 04/15/2011 10:00 AM, Paul Eggleton wrote:
> From: Paul Eggleton <paul.eggleton@linux.intel.com>
> 
> Avoids manual configuration of the BeagleBoard xM's ethernet port (which
> shows up as usb0).
> 
> Fixes [YOCTO #930]
> 
> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
> ---
>  .../netbase/netbase-4.45/beagleboard/interfaces    |   27 ++++++++++++++++++++
>  1 files changed, 27 insertions(+), 0 deletions(-)
>  create mode 100644 meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces
> 
> diff --git a/meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces b/meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces
> new file mode 100644
> index 0000000..b6935c1
> --- /dev/null
> +++ b/meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces
> @@ -0,0 +1,27 @@
> +# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
> + 
> +# The loopback interface
> +auto lo
> +iface lo inet loopback
> +
> +# Wireless interfaces
> +iface wlan0 inet dhcp
> +	wireless_mode managed
> +	wireless_essid any
> +	wpa-driver wext
> +	wpa-conf /etc/wpa_supplicant.conf
> +
> +iface atml0 inet dhcp
> +
> +# Wired or wireless interfaces
> +auto eth0
> +iface eth0 inet dhcp
> +iface eth1 inet dhcp

Since we're adding a this specifically for the beagleboard, I don't see
the value of adding eth0 or eth1. I'm not sure about wifi and bluetooth,
I believe there are modules out there.

I suppose it doesn't hurt to have them there as examples.

> +
> +# Ethernet/RNDIS gadget (g_ether) or LAN9514 on BeagleBoard xM
> +auto usb0
> +iface usb0 inet dhcp
> +
> +# Bluetooth networking
> +iface bnep0 inet dhcp
> +

-- 
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel


^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH 2/3] netbase: automatically bring up usb0 on beagleboard
  2011-04-15 22:37   ` Darren Hart
@ 2011-04-15 22:43     ` Gary Thomas
  2011-04-15 23:01       ` Darren Hart
  0 siblings, 1 reply; 13+ messages in thread
From: Gary Thomas @ 2011-04-15 22:43 UTC (permalink / raw)
  To: Darren Hart; +Cc: Paul Eggleton, poky, openembedded-core

On 04/15/2011 04:37 PM, Darren Hart wrote:
>
>
> On 04/15/2011 10:00 AM, Paul Eggleton wrote:
>> From: Paul Eggleton<paul.eggleton@linux.intel.com>
>>
>> Avoids manual configuration of the BeagleBoard xM's ethernet port (which
>> shows up as usb0).
>>
>> Fixes [YOCTO #930]
>>
>> Signed-off-by: Paul Eggleton<paul.eggleton@linux.intel.com>
>> ---
>>   .../netbase/netbase-4.45/beagleboard/interfaces    |   27 ++++++++++++++++++++
>>   1 files changed, 27 insertions(+), 0 deletions(-)
>>   create mode 100644 meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces
>>
>> diff --git a/meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces b/meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces
>> new file mode 100644
>> index 0000000..b6935c1
>> --- /dev/null
>> +++ b/meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces
>> @@ -0,0 +1,27 @@
>> +# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
>> +
>> +# The loopback interface
>> +auto lo
>> +iface lo inet loopback
>> +
>> +# Wireless interfaces
>> +iface wlan0 inet dhcp
>> +	wireless_mode managed
>> +	wireless_essid any
>> +	wpa-driver wext
>> +	wpa-conf /etc/wpa_supplicant.conf
>> +
>> +iface atml0 inet dhcp
>> +
>> +# Wired or wireless interfaces
>> +auto eth0
>> +iface eth0 inet dhcp
>> +iface eth1 inet dhcp
>
> Since we're adding a this specifically for the beagleboard, I don't see
> the value of adding eth0 or eth1. I'm not sure about wifi and bluetooth,
> I believe there are modules out there.

eth1 yes, but doesn't the BeagleBoard xM have eth0?

>
> I suppose it doesn't hurt to have them there as examples.
>
>> +
>> +# Ethernet/RNDIS gadget (g_ether) or LAN9514 on BeagleBoard xM
>> +auto usb0
>> +iface usb0 inet dhcp
>> +
>> +# Bluetooth networking
>> +iface bnep0 inet dhcp
>> +
>

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------


^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH 2/3] netbase: automatically bring up usb0 on beagleboard
  2011-04-15 22:43     ` Gary Thomas
@ 2011-04-15 23:01       ` Darren Hart
  2011-04-18  9:12         ` Paul Eggleton
  0 siblings, 1 reply; 13+ messages in thread
From: Darren Hart @ 2011-04-15 23:01 UTC (permalink / raw)
  To: Gary Thomas; +Cc: Paul Eggleton, poky, openembedded-core



On 04/15/2011 03:43 PM, Gary Thomas wrote:
> On 04/15/2011 04:37 PM, Darren Hart wrote:
>>
>>
>> On 04/15/2011 10:00 AM, Paul Eggleton wrote:
>>> From: Paul Eggleton<paul.eggleton@linux.intel.com>
>>>
>>> Avoids manual configuration of the BeagleBoard xM's ethernet port (which
>>> shows up as usb0).
>>>
>>> Fixes [YOCTO #930]
>>>
>>> Signed-off-by: Paul Eggleton<paul.eggleton@linux.intel.com>
>>> ---
>>>   .../netbase/netbase-4.45/beagleboard/interfaces    |   27 ++++++++++++++++++++
>>>   1 files changed, 27 insertions(+), 0 deletions(-)
>>>   create mode 100644 meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces
>>>
>>> diff --git a/meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces b/meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces
>>> new file mode 100644
>>> index 0000000..b6935c1
>>> --- /dev/null
>>> +++ b/meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces
>>> @@ -0,0 +1,27 @@
>>> +# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
>>> +
>>> +# The loopback interface
>>> +auto lo
>>> +iface lo inet loopback
>>> +
>>> +# Wireless interfaces
>>> +iface wlan0 inet dhcp
>>> +	wireless_mode managed
>>> +	wireless_essid any
>>> +	wpa-driver wext
>>> +	wpa-conf /etc/wpa_supplicant.conf
>>> +
>>> +iface atml0 inet dhcp
>>> +
>>> +# Wired or wireless interfaces
>>> +auto eth0
>>> +iface eth0 inet dhcp
>>> +iface eth1 inet dhcp
>>
>> Since we're adding a this specifically for the beagleboard, I don't see
>> the value of adding eth0 or eth1. I'm not sure about wifi and bluetooth,
>> I believe there are modules out there.
> 
> eth1 yes, but doesn't the BeagleBoard xM have eth0?

No. The onboard device is usb0.

--
Darren

> 
>>
>> I suppose it doesn't hurt to have them there as examples.
>>
>>> +
>>> +# Ethernet/RNDIS gadget (g_ether) or LAN9514 on BeagleBoard xM
>>> +auto usb0
>>> +iface usb0 inet dhcp
>>> +
>>> +# Bluetooth networking
>>> +iface bnep0 inet dhcp
>>> +
>>
> 

-- 
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel


^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH 2/3] netbase: automatically bring up usb0 on beagleboard
  2011-04-15 18:26   ` Saul Wold
@ 2011-04-16  4:31     ` Koen Kooi
  2011-04-18  7:05       ` Richard Purdie
  2011-04-18  9:17     ` Paul Eggleton
  1 sibling, 1 reply; 13+ messages in thread
From: Koen Kooi @ 2011-04-16  4:31 UTC (permalink / raw)
  To: Saul Wold
  Cc: Paul Eggleton, poky@yoctoproject.org,
	openembedded-core@lists.openembedded.org



Op 15 apr. 2011 om 20:26 heeft Saul Wold <sgw@linux.intel.com> het volgende geschreven:

> On 04/15/2011 10:00 AM, Paul Eggleton wrote:
>> From: Paul Eggleton<paul.eggleton@linux.intel.com>
>> 
>> Avoids manual configuration of the BeagleBoard xM's ethernet port (which
>> shows up as usb0).
>> 
>> Fixes [YOCTO #930]
>> 
>> Signed-off-by: Paul Eggleton<paul.eggleton@linux.intel.com>
>> ---
>>  .../netbase/netbase-4.45/beagleboard/interfaces    |   27 ++++++++++++++++++++
>>  1 files changed, 27 insertions(+), 0 deletions(-)
>>  create mode 100644 meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces
>> 
> I know this time would come!
> 
> So this is up for discussion in a big way!
> 
> There was some initial discussion at ELC this last week about what goes where and how layers are going to work moving forward.  I know that we are committed to the qemu* machines in oe-core (meta), and that currently meta-yocto contains a set of core HW (beagleboard among them), so the question then is should the HW specific stuff, such as this patch move to meta-yocto or some other layer?  There are a couple other recipes such as x-load and formfactor that contain HW specific files.

It should live in the upstream beagleboard BSP layer, which currently is meta-texasinstruments



^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH 2/3] netbase: automatically bring up usb0 on beagleboard
  2011-04-16  4:31     ` Koen Kooi
@ 2011-04-18  7:05       ` Richard Purdie
  0 siblings, 0 replies; 13+ messages in thread
From: Richard Purdie @ 2011-04-18  7:05 UTC (permalink / raw)
  To: Koen Kooi
  Cc: openembedded-core@lists.openembedded.org, Paul Eggleton,
	poky@yoctoproject.org

On Sat, 2011-04-16 at 06:31 +0200, Koen Kooi wrote:
> 
> Op 15 apr. 2011 om 20:26 heeft Saul Wold <sgw@linux.intel.com> het volgende geschreven:
> 
> > On 04/15/2011 10:00 AM, Paul Eggleton wrote:
> >> From: Paul Eggleton<paul.eggleton@linux.intel.com>
> >> 
> >> Avoids manual configuration of the BeagleBoard xM's ethernet port (which
> >> shows up as usb0).
> >> 
> >> Fixes [YOCTO #930]
> >> 
> >> Signed-off-by: Paul Eggleton<paul.eggleton@linux.intel.com>
> >> ---
> >>  .../netbase/netbase-4.45/beagleboard/interfaces    |   27 ++++++++++++++++++++
> >>  1 files changed, 27 insertions(+), 0 deletions(-)
> >>  create mode 100644 meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces
> >> 
> > I know this time would come!
> > 
> > So this is up for discussion in a big way!
> > 
> > There was some initial discussion at ELC this last week about what
> goes where and how layers are going to work moving forward.  I know
> that we are committed to the qemu* machines in oe-core (meta), and
> that currently meta-yocto contains a set of core HW (beagleboard among
> them), so the question then is should the HW specific stuff, such as
> this patch move to meta-yocto or some other layer?  There are a couple
> other recipes such as x-load and formfactor that contain HW specific
> files.
> 
> It should live in the upstream beagleboard BSP layer, which currently
> is meta-texasinstruments

That is the goal, yes. It was agreed that until we sort out the layer
tooling, there would be some code in meta-yocto which would be a copy of
various upstream parts which includes beagleboard. Over time I'm hoping
to see these pieces converge, then we when get the tooling right it will
become automated.

Cheers,

Richard




^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH 2/3] netbase: automatically bring up usb0 on beagleboard
  2011-04-15 23:01       ` Darren Hart
@ 2011-04-18  9:12         ` Paul Eggleton
  2011-04-18 16:07           ` Darren Hart
  0 siblings, 1 reply; 13+ messages in thread
From: Paul Eggleton @ 2011-04-18  9:12 UTC (permalink / raw)
  To: poky; +Cc: Darren Hart, openembedded-core

On Saturday 16 April 2011 00:01:30 Darren Hart wrote:
> On 04/15/2011 03:43 PM, Gary Thomas wrote:
> > eth1 yes, but doesn't the BeagleBoard xM have eth0?
> 
> No. The onboard device is usb0.

Looks like we're not the only ones confused by this:

https://bugs.launchpad.net/linux-linaro/+bug/622429

-- 

Paul Eggleton
Intel Open Source Technology Centre (UK)


^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH 2/3] netbase: automatically bring up usb0 on beagleboard
  2011-04-15 18:26   ` Saul Wold
  2011-04-16  4:31     ` Koen Kooi
@ 2011-04-18  9:17     ` Paul Eggleton
  1 sibling, 0 replies; 13+ messages in thread
From: Paul Eggleton @ 2011-04-18  9:17 UTC (permalink / raw)
  To: poky; +Cc: Wold, Saul, openembedded-core

On Friday 15 April 2011 19:26:43 Saul Wold wrote:
> There was some initial discussion at ELC this last week about what goes
> where and how layers are going to work moving forward.  I know that we
> are committed to the qemu* machines in oe-core (meta), and that
> currently meta-yocto contains a set of core HW (beagleboard among them),
> so the question then is should the HW specific stuff, such as this patch
> move to meta-yocto or some other layer?  There are a couple other
> recipes such as x-load and formfactor that contain HW specific files.

Ah, yes, you're right - we definitely don't want this file in oe-core. I should 
have pushed this particular patch to meta-yocto (in support of the 
basic/temporary beagleboard support we have there), so please ignore this one.

Cheers,
Paul


^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH 2/3] netbase: automatically bring up usb0 on beagleboard
  2011-04-18  9:12         ` Paul Eggleton
@ 2011-04-18 16:07           ` Darren Hart
  0 siblings, 0 replies; 13+ messages in thread
From: Darren Hart @ 2011-04-18 16:07 UTC (permalink / raw)
  To: Paul Eggleton; +Cc: poky, openembedded-core



On 04/18/2011 02:12 AM, Paul Eggleton wrote:
> On Saturday 16 April 2011 00:01:30 Darren Hart wrote:
>> On 04/15/2011 03:43 PM, Gary Thomas wrote:
>>> eth1 yes, but doesn't the BeagleBoard xM have eth0?
>>
>> No. The onboard device is usb0.
> 
> Looks like we're not the only ones confused by this:
> 
> https://bugs.launchpad.net/linux-linaro/+bug/622429
> 

Perhaps I am missing some context, but I don't see any problem with
having the name usb0. In fact, I find it informative, and helps to
explain why things like tftp don't work from u-boot, etc.

While the community remains divided, I plan to stay in the usb0 camp.

-- 
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel


^ permalink raw reply	[flat|nested] 13+ messages in thread

end of thread, other threads:[~2011-04-18 16:07 UTC | newest]

Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-04-15 17:00 [PATCH 0/3] /etc/network/interfaces updates Paul Eggleton
2011-04-15 17:00 ` [PATCH 1/3] netbase: automatically bring up eth0 Paul Eggleton
2011-04-15 17:00 ` [PATCH 2/3] netbase: automatically bring up usb0 on beagleboard Paul Eggleton
2011-04-15 18:26   ` Saul Wold
2011-04-16  4:31     ` Koen Kooi
2011-04-18  7:05       ` Richard Purdie
2011-04-18  9:17     ` Paul Eggleton
2011-04-15 22:37   ` Darren Hart
2011-04-15 22:43     ` Gary Thomas
2011-04-15 23:01       ` Darren Hart
2011-04-18  9:12         ` Paul Eggleton
2011-04-18 16:07           ` Darren Hart
2011-04-15 17:00 ` [PATCH 3/3] netbase: add /etc/network/interfaces file for qemumips & qemuppc Paul Eggleton

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox