QEMU-Arm Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Jamin Lin <jamin_lin@aspeedtech.com>
To: "Cédric Le Goater" <clg@kaod.org>,
	"Peter Maydell" <peter.maydell@linaro.org>,
	"Steven Lee" <steven_lee@aspeedtech.com>,
	"Troy Lee" <leetroy@gmail.com>,
	"Kane Chen" <kane_chen@aspeedtech.com>,
	"Andrew Jeffery" <andrew@codeconstruct.com.au>,
	"Joel Stanley" <joel@jms.id.au>,
	"open list:ASPEED BMCs" <qemu-arm@nongnu.org>,
	"open list:All patches CC here" <qemu-devel@nongnu.org>
Cc: Jamin Lin <jamin_lin@aspeedtech.com>, Troy Lee <troy_lee@aspeedtech.com>
Subject: [PATCH v2 08/10] hw/arm/aspeed_ast1040: Introduce I2C support
Date: Tue, 2 Jun 2026 05:28:38 +0000	[thread overview]
Message-ID: <20260602052827.1535299-9-jamin_lin@aspeedtech.com> (raw)
In-Reply-To: <20260602052827.1535299-1-jamin_lin@aspeedtech.com>

Introduce I2C controller support for the AST1040 SoC model.

The I2C model type is selected from the SoC type name, allowing the AST1040
SoC to use the corresponding aspeed.i2c-ast1040 model.

The I2C controller is mapped at 0x74C0F000 and uses IRQs
64 - 77, with one IRQ assigned per I2C bus.

The controller DRAM link is connected to SRAM1 (HyperRAM)
for DMA support.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 hw/arm/aspeed_ast1040.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/hw/arm/aspeed_ast1040.c b/hw/arm/aspeed_ast1040.c
index 77211ce1f3..6d1cb9b102 100644
--- a/hw/arm/aspeed_ast1040.c
+++ b/hw/arm/aspeed_ast1040.c
@@ -117,6 +117,7 @@ static void aspeed_soc_ast1040_init(Object *obj)
         object_initialize_child(obj, "sgpio[*]", &s->sgpiom[i],
                                 "aspeed.sgpio-ast2700");
     }
+    object_initialize_child(obj, "i2c", &s->i2c, TYPE_ASPEED_1040_I2C);
 
     object_initialize_child(obj, "pwm", &s->pwm, TYPE_UNIMPLEMENTED_DEVICE);
     object_initialize_child(obj, "espi", &s->espi, TYPE_UNIMPLEMENTED_DEVICE);
@@ -233,6 +234,21 @@ static void aspeed_soc_ast1040_realize(DeviceState *dev_soc, Error **errp)
                        aspeed_soc_ast1040_get_irq(s, ASPEED_DEV_SGPIOM0 + i));
     }
 
+    /* I2C */
+    object_property_set_link(OBJECT(&s->i2c), "dram", OBJECT(&s->sram[1]),
+                             &error_abort);
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->i2c), errp)) {
+        return;
+    }
+    aspeed_mmio_map(s->memory, SYS_BUS_DEVICE(&s->i2c), 0,
+                    sc->memmap[ASPEED_DEV_I2C]);
+    for (i = 0; i < ASPEED_I2C_GET_CLASS(&s->i2c)->num_busses; i++) {
+        qemu_irq irq = qdev_get_gpio_in(DEVICE(&a->armv7m),
+                                        sc->irqmap[ASPEED_DEV_I2C] + i);
+        /* The AST1040 I2C controller has one IRQ per bus. */
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c.busses[i]), 0, irq);
+    }
+
     /* Unimplemented peripherals */
     aspeed_mmio_map_unimplemented(s->memory, SYS_BUS_DEVICE(&s->pwm),
                                   "aspeed.pwm",
-- 
2.43.0


  parent reply	other threads:[~2026-06-02  5:29 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-02  5:28 [PATCH v2 00/10] hw/arm/aspeed: Add AST1040 peripheral support Jamin Lin
2026-06-02  5:28 ` [PATCH v2 01/10] hw/i2c/aspeed_i2c: Introduce dma_addr_lo_mask to unify DMA address handling Jamin Lin
2026-06-02  6:26   ` Cédric Le Goater
2026-06-03  2:58     ` Jamin Lin
2026-06-02  5:28 ` [PATCH v2 02/10] hw/i2c/aspeed_i2c: Increase AST2700 buffer mode size and adjust offset Jamin Lin
2026-06-02  6:33   ` Cédric Le Goater
2026-06-02  8:22     ` Jamin Lin
2026-06-02  5:28 ` [PATCH v2 03/10] hw/arm/aspeed_ast1040: Reuse AST2700 ADC model Jamin Lin
2026-06-02  5:28 ` [PATCH v2 04/10] hw/arm/aspeed_ast1040: Introduce PECI support Jamin Lin
2026-06-02  5:28 ` [PATCH v2 05/10] hw/arm/aspeed_ast1040: Reuse AST2700 GPIO controller model Jamin Lin
2026-06-02  5:28 ` [PATCH v2 06/10] hw/arm/aspeed_ast1040: Add SGPIO controller support Jamin Lin
2026-06-02  5:28 ` [PATCH v2 07/10] hw/i2c/aspeed_i2c: Introduce AST1040 I2C model Jamin Lin
2026-06-02  5:28 ` Jamin Lin [this message]
2026-06-02  6:33   ` [PATCH v2 08/10] hw/arm/aspeed_ast1040: Introduce I2C support Cédric Le Goater
2026-06-02  8:41     ` Jamin Lin
2026-06-02  5:28 ` [PATCH v2 09/10] hw/arm/aspeed_ast1040_evb: Introduce onboard I2C device Jamin Lin
2026-06-02  6:34   ` Cédric Le Goater
2026-06-03  1:31     ` Jamin Lin
2026-06-02  5:28 ` [PATCH v2 10/10] hw/arm/aspeed_ast1040: Reuse AST2700 watchdog models Jamin Lin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260602052827.1535299-9-jamin_lin@aspeedtech.com \
    --to=jamin_lin@aspeedtech.com \
    --cc=andrew@codeconstruct.com.au \
    --cc=clg@kaod.org \
    --cc=joel@jms.id.au \
    --cc=kane_chen@aspeedtech.com \
    --cc=leetroy@gmail.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=steven_lee@aspeedtech.com \
    --cc=troy_lee@aspeedtech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox