From: Jamin Lin <jamin_lin@aspeedtech.com>
To: "philmd@linaro.org" <philmd@linaro.org>,
"peterx@redhat.com" <peterx@redhat.com>,
"Cédric Le Goater" <clg@kaod.org>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Steven Lee" <steven_lee@aspeedtech.com>,
"Troy Lee" <leetroy@gmail.com>,
"Kane Chen" <kane_chen@aspeedtech.com>,
"Andrew Jeffery" <andrew@codeconstruct.com.au>,
"Joel Stanley" <joel@jms.id.au>, "Zhao Liu" <zhao1.liu@intel.com>,
"open list:ASPEED BMCs" <qemu-arm@nongnu.org>,
"open list:All patches CC here" <qemu-devel@nongnu.org>
Cc: "Jamin Lin" <jamin_lin@aspeedtech.com>,
"Troy Lee" <troy_lee@aspeedtech.com>,
"farosas@suse.de" <farosas@suse.de>,
"flwu@google.com" <flwu@google.com>,
"nabihestefan@google.com" <nabihestefan@google.com>,
"Cédric Le Goater" <clg@redhat.com>
Subject: [PATCH v6 03/11] hw/usb/hcd-ehci: Add property to advertise 64-bit addressing capability
Date: Mon, 4 May 2026 02:53:46 +0000 [thread overview]
Message-ID: <20260504025342.1452605-4-jamin_lin@aspeedtech.com> (raw)
In-Reply-To: <20260504025342.1452605-1-jamin_lin@aspeedtech.com>
Introduce a new boolean property, "caps-64bit-addr", to control
HCCPARAMS[0] (64-bit Addressing Capability).
When enabled, the EHCI controller advertises support for 64-bit
address memory pointers as defined in the EHCI specification
(Table 2-7, HCCPARAMS). This allows software to use the 64-bit
data structure formats described in Appendix B.
When disabled (default), the controller reports 32-bit addressing
capability and uses the standard 32-bit data structures.
The EHCI CTRLDSSEGMENT register provides the upper 32 bits [63:32] used to
form 64-bit addresses for EHCI control data structures. Per EHCI 1.0
spec section 2.3.5, when the HCCPARAMS 64-bit Addressing Capability bit
is zero, CTRLDSSEGMENT is not used: software cannot write it and reads
must return zero.
Add a capability check in the operational register write handler and
reject guest writes to CTRLDSSEGMENT when 64-bit addressing is
not enabled.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
hw/usb/hcd-ehci.h | 5 ++++-
hw/usb/hcd-ehci.c | 14 +++++++++++++-
2 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/hw/usb/hcd-ehci.h b/hw/usb/hcd-ehci.h
index 3acbddfc5c..f1f2fde578 100644
--- a/hw/usb/hcd-ehci.h
+++ b/hw/usb/hcd-ehci.h
@@ -257,6 +257,7 @@ struct EHCIState {
/* properties */
uint32_t maxframes;
bool migrate_fetch_addr_64bit;
+ bool caps_64bit_addr;
/*
* EHCI spec version 1.0 Section 2.3
@@ -313,7 +314,9 @@ struct EHCIState {
#define DEFINE_EHCI_COMMON_PROPERTIES(_state) \
DEFINE_PROP_UINT32("maxframes", _state, ehci.maxframes, 128), \
DEFINE_PROP_BOOL("x-migrate-fetch-addr-64bit", _state, \
- ehci.migrate_fetch_addr_64bit, true)
+ ehci.migrate_fetch_addr_64bit, true), \
+ DEFINE_PROP_BOOL("caps-64bit-addr", _state, \
+ ehci.caps_64bit_addr, false)
extern const VMStateDescription vmstate_ehci;
diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c
index 9d74259289..7166a93fd2 100644
--- a/hw/usb/hcd-ehci.c
+++ b/hw/usb/hcd-ehci.c
@@ -1109,6 +1109,15 @@ static void ehci_opreg_write(void *ptr, hwaddr addr,
}
break;
+ case CTRLDSSEGMENT:
+ if (!s->caps_64bit_addr) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "ehci: write to CTRLDSSEGMENT while "
+ "64-bit addressing capability is disabled\n");
+ return;
+ }
+ break;
+
case ASYNCLISTADDR:
if (ehci_async_enabled(s)) {
qemu_log_mask(LOG_GUEST_ERROR,
@@ -2554,6 +2563,9 @@ void usb_ehci_realize(EHCIState *s, DeviceState *dev, Error **errp)
s->maxframes);
return;
}
+ if (s->caps_64bit_addr) {
+ s->caps[0x08] |= BIT(0);
+ }
memory_region_add_subregion(&s->mem, s->capsbase, &s->mem_caps);
memory_region_add_subregion(&s->mem, s->opregbase, &s->mem_opreg);
@@ -2613,7 +2625,7 @@ void usb_ehci_init(EHCIState *s, DeviceState *dev)
s->caps[0x05] = 0x00; /* No companion ports at present */
s->caps[0x06] = 0x00;
s->caps[0x07] = 0x00;
- s->caps[0x08] = 0x80; /* We can cache whole frame, no 64-bit */
+ s->caps[0x08] = 0x80; /* We can cache whole frame */
s->caps[0x0a] = 0x00;
s->caps[0x0b] = 0x00;
--
2.43.0
next prev parent reply other threads:[~2026-05-04 2:54 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-04 2:53 [PATCH v6 00/11] hw/usb/ehci: Add 64-bit descriptor addressing support Jamin Lin
2026-05-04 2:53 ` [PATCH v6 01/11] tests/functional/arm/test_aspeed_ast2600_sdk: Add USB EHCI test for AST2600 SDK Jamin Lin
2026-05-04 2:53 ` [PATCH v6 02/11] hw/usb/hcd-ehci: Change descriptor addresses to 64-bit with migration compatibility Jamin Lin
2026-05-04 5:19 ` Cédric Le Goater
2026-05-04 12:17 ` Philippe Mathieu-Daudé
2026-05-06 2:09 ` Jamin Lin
2026-05-06 3:38 ` Jamin Lin
2026-05-04 2:53 ` Jamin Lin [this message]
2026-05-04 2:53 ` [PATCH v6 04/11] hw/usb/hcd-ehci: Implement 64-bit QH descriptor addressing Jamin Lin
2026-05-04 2:53 ` [PATCH v6 05/11] hw/usb/hcd-ehci: Implement 64-bit qTD " Jamin Lin
2026-05-04 2:53 ` [PATCH v6 06/11] hw/usb/hcd-ehci: Implement 64-bit iTD " Jamin Lin
2026-05-04 2:53 ` [PATCH v6 07/11] hw/usb/hcd-ehci: Implement 64-bit siTD " Jamin Lin
2026-05-04 2:53 ` [PATCH v6 08/11] hw/usb/hcd-ehci: Add ctrldssegment-default property Jamin Lin
2026-05-04 11:18 ` Philippe Mathieu-Daudé
2026-05-04 12:17 ` Cédric Le Goater
2026-05-04 12:42 ` Philippe Mathieu-Daudé
2026-05-04 13:12 ` Cédric Le Goater
2026-05-06 1:22 ` Jamin Lin
2026-05-06 3:36 ` Jamin Lin
2026-05-04 2:53 ` [PATCH v6 09/11] hw/arm/aspeed_ast27x0: Set EHCI ctrldssegment-default Jamin Lin
2026-05-04 11:19 ` Philippe Mathieu-Daudé
2026-05-04 2:53 ` [PATCH v6 10/11] hw/arm/aspeed_ast27x0: Enable 64-bit EHCI DMA addressing Jamin Lin
2026-05-04 2:53 ` [PATCH v6 11/11] tests/functional/aarch64/test_aspeed_ast2700: Add USB EHCI test for AST2700 A1/A2 Jamin Lin
2026-05-04 5:27 ` [PATCH v6 00/11] hw/usb/ehci: Add 64-bit descriptor addressing support Cédric Le Goater
2026-05-11 6:13 ` Cédric Le Goater
2026-05-11 6:30 ` Jamin Lin
2026-05-12 14:47 ` Cédric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260504025342.1452605-4-jamin_lin@aspeedtech.com \
--to=jamin_lin@aspeedtech.com \
--cc=andrew@codeconstruct.com.au \
--cc=clg@kaod.org \
--cc=clg@redhat.com \
--cc=farosas@suse.de \
--cc=flwu@google.com \
--cc=joel@jms.id.au \
--cc=kane_chen@aspeedtech.com \
--cc=leetroy@gmail.com \
--cc=nabihestefan@google.com \
--cc=peter.maydell@linaro.org \
--cc=peterx@redhat.com \
--cc=philmd@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=steven_lee@aspeedtech.com \
--cc=troy_lee@aspeedtech.com \
--cc=zhao1.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox