From: Jamin Lin <jamin_lin@aspeedtech.com>
To: "philmd@linaro.org" <philmd@linaro.org>,
"peterx@redhat.com" <peterx@redhat.com>,
"Cédric Le Goater" <clg@kaod.org>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Steven Lee" <steven_lee@aspeedtech.com>,
"Troy Lee" <leetroy@gmail.com>,
"Kane Chen" <kane_chen@aspeedtech.com>,
"Andrew Jeffery" <andrew@codeconstruct.com.au>,
"Joel Stanley" <joel@jms.id.au>, "Zhao Liu" <zhao1.liu@intel.com>,
"open list:ASPEED BMCs" <qemu-arm@nongnu.org>,
"open list:All patches CC here" <qemu-devel@nongnu.org>
Cc: "Jamin Lin" <jamin_lin@aspeedtech.com>,
"Troy Lee" <troy_lee@aspeedtech.com>,
"farosas@suse.de" <farosas@suse.de>,
"flwu@google.com" <flwu@google.com>,
"nabihestefan@google.com" <nabihestefan@google.com>,
"Cédric Le Goater" <clg@redhat.com>
Subject: [PATCH v6 08/11] hw/usb/hcd-ehci: Add ctrldssegment-default property
Date: Mon, 4 May 2026 02:53:52 +0000 [thread overview]
Message-ID: <20260504025342.1452605-9-jamin_lin@aspeedtech.com> (raw)
In-Reply-To: <20260504025342.1452605-1-jamin_lin@aspeedtech.com>
When 64-bit addressing is supported, the Linux EHCI driver programs the
segment register to zero. See ehci_run function:
https://github.com/torvalds/linux/blob/master/drivers/usb/host/ehci-hcd.c
The driver comment also notes that descriptor structures allocated from
the DMA pool use segment zero semantics.
Descriptor memory is allocated using the DMA API. The platform driver
configures a 64-bit DMA mask so memory can be allocated above 4GB.
See ehci_platform_probe function:
https://github.com/torvalds/linux/blob/master/drivers/usb/host/ehci-platform.c
On AST2700 platforms, system DRAM is mapped above 4GB at 0x400000000.
As a result, descriptor addresses constructed directly from the guest
EHCI registers do not match the actual system address used by the
controller when fetching queue heads (QH) and queue element transfer
descriptors (qTD).
Add a ctrldssegment-default property so platforms can provide a
descriptor address offset when constructing descriptor addresses.
This allows systems where DRAM resides above 4GB to access EHCI
descriptors correctly.
The default value is zero, so existing machines are not affected.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
---
hw/usb/hcd-ehci.h | 5 ++++-
hw/usb/hcd-ehci.c | 1 +
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/hw/usb/hcd-ehci.h b/hw/usb/hcd-ehci.h
index 8e6a8cdfb0..3d57e1de5f 100644
--- a/hw/usb/hcd-ehci.h
+++ b/hw/usb/hcd-ehci.h
@@ -264,6 +264,7 @@ struct EHCIState {
uint32_t maxframes;
bool migrate_fetch_addr_64bit;
bool caps_64bit_addr;
+ uint32_t ctrldssegment_default;
/*
* EHCI spec version 1.0 Section 2.3
@@ -322,7 +323,9 @@ struct EHCIState {
DEFINE_PROP_BOOL("x-migrate-fetch-addr-64bit", _state, \
ehci.migrate_fetch_addr_64bit, true), \
DEFINE_PROP_BOOL("caps-64bit-addr", _state, \
- ehci.caps_64bit_addr, false)
+ ehci.caps_64bit_addr, false), \
+ DEFINE_PROP_UINT32("ctrldssegment-default", _state, \
+ ehci.ctrldssegment_default, 0)
extern const VMStateDescription vmstate_ehci;
diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c
index b1c7bfd90c..62c3770ac5 100644
--- a/hw/usb/hcd-ehci.c
+++ b/hw/usb/hcd-ehci.c
@@ -1134,6 +1134,7 @@ static void ehci_opreg_write(void *ptr, hwaddr addr,
"64-bit addressing capability is disabled\n");
return;
}
+ val |= s->ctrldssegment_default;
break;
case ASYNCLISTADDR:
--
2.43.0
next prev parent reply other threads:[~2026-05-04 2:55 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-04 2:53 [PATCH v6 00/11] hw/usb/ehci: Add 64-bit descriptor addressing support Jamin Lin
2026-05-04 2:53 ` [PATCH v6 01/11] tests/functional/arm/test_aspeed_ast2600_sdk: Add USB EHCI test for AST2600 SDK Jamin Lin
2026-05-04 2:53 ` [PATCH v6 02/11] hw/usb/hcd-ehci: Change descriptor addresses to 64-bit with migration compatibility Jamin Lin
2026-05-04 5:19 ` Cédric Le Goater
2026-05-04 12:17 ` Philippe Mathieu-Daudé
2026-05-06 2:09 ` Jamin Lin
2026-05-06 3:38 ` Jamin Lin
2026-05-04 2:53 ` [PATCH v6 03/11] hw/usb/hcd-ehci: Add property to advertise 64-bit addressing capability Jamin Lin
2026-05-04 2:53 ` [PATCH v6 04/11] hw/usb/hcd-ehci: Implement 64-bit QH descriptor addressing Jamin Lin
2026-05-04 2:53 ` [PATCH v6 05/11] hw/usb/hcd-ehci: Implement 64-bit qTD " Jamin Lin
2026-05-04 2:53 ` [PATCH v6 06/11] hw/usb/hcd-ehci: Implement 64-bit iTD " Jamin Lin
2026-05-04 2:53 ` [PATCH v6 07/11] hw/usb/hcd-ehci: Implement 64-bit siTD " Jamin Lin
2026-05-04 2:53 ` Jamin Lin [this message]
2026-05-04 11:18 ` [PATCH v6 08/11] hw/usb/hcd-ehci: Add ctrldssegment-default property Philippe Mathieu-Daudé
2026-05-04 12:17 ` Cédric Le Goater
2026-05-04 12:42 ` Philippe Mathieu-Daudé
2026-05-04 13:12 ` Cédric Le Goater
2026-05-06 1:22 ` Jamin Lin
2026-05-06 3:36 ` Jamin Lin
2026-05-04 2:53 ` [PATCH v6 09/11] hw/arm/aspeed_ast27x0: Set EHCI ctrldssegment-default Jamin Lin
2026-05-04 11:19 ` Philippe Mathieu-Daudé
2026-05-04 2:53 ` [PATCH v6 10/11] hw/arm/aspeed_ast27x0: Enable 64-bit EHCI DMA addressing Jamin Lin
2026-05-04 2:53 ` [PATCH v6 11/11] tests/functional/aarch64/test_aspeed_ast2700: Add USB EHCI test for AST2700 A1/A2 Jamin Lin
2026-05-04 5:27 ` [PATCH v6 00/11] hw/usb/ehci: Add 64-bit descriptor addressing support Cédric Le Goater
2026-05-11 6:13 ` Cédric Le Goater
2026-05-11 6:30 ` Jamin Lin
2026-05-12 14:47 ` Cédric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260504025342.1452605-9-jamin_lin@aspeedtech.com \
--to=jamin_lin@aspeedtech.com \
--cc=andrew@codeconstruct.com.au \
--cc=clg@kaod.org \
--cc=clg@redhat.com \
--cc=farosas@suse.de \
--cc=flwu@google.com \
--cc=joel@jms.id.au \
--cc=kane_chen@aspeedtech.com \
--cc=leetroy@gmail.com \
--cc=nabihestefan@google.com \
--cc=peter.maydell@linaro.org \
--cc=peterx@redhat.com \
--cc=philmd@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=steven_lee@aspeedtech.com \
--cc=troy_lee@aspeedtech.com \
--cc=zhao1.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox