[PATCH v2 0/4] drm/tyr: implement GPU reset API

[PATCH v2 0/4] drm/tyr: implement GPU reset API

[Onur Özkan]

This series adds GPU reset handling support for Tyr in a new module
drivers/gpu/drm/tyr/driver.rs which encapsulates the low-level reset
controller internals and exposes a ResetHandle API to the driver.

This series is based on Alice's "Creation of workqueues in Rust" [1]
series.

Changes since v1:
  - Removed OrderedQueue and using Alice's workqueue implementation [1] instead.
  - Added Resettable trait with pre_reset and post_reset hooks to be implemented by
    reset-managed hardwares.
  - Added SRCU abstraction and used it to synchronize the reset work and hardware access.

3 important points:
  - There is no hardware using this API yet.
  - On post_reset() failure, we don't do anything for now. We should unplug the GPU (that's
    what Panthor does) but we don't have the infrastructure for that yet (see [2]).
  - In schedule(), similar to panthor_device_schedule_reset(), we should have a PM check
    but similar to the note above, we don't have the infrastructure for that yet.

Link: https://lore.kernel.org/all/20260312-create-workqueue-v4-0-ea39c351c38f@google.com/ [1]
Link: https://gitlab.freedesktop.org/panfrost/linux/-/work_items/29#note_3391826 [2]
Link: https://gitlab.freedesktop.org/panfrost/linux/-/issues/28

Onur Özkan (4):
  rust: add SRCU abstraction
  MAINTAINERS: add Rust SRCU files to SRCU entry
  rust: add Work::disable_sync
  drm/tyr: add reset management API

 MAINTAINERS                          |   3 +
 drivers/gpu/drm/tyr/driver.rs        |  40 +---
 drivers/gpu/drm/tyr/reset.rs         | 293 +++++++++++++++++++++++++++
 drivers/gpu/drm/tyr/reset/hw_gate.rs | 155 ++++++++++++++
 drivers/gpu/drm/tyr/tyr.rs           |   1 +
 rust/helpers/helpers.c               |   1 +
 rust/helpers/srcu.c                  |  18 ++
 rust/kernel/sync.rs                  |   2 +
 rust/kernel/sync/srcu.rs             | 109 ++++++++++
 rust/kernel/workqueue/mod.rs         |  15 ++
 10 files changed, 607 insertions(+), 30 deletions(-)
 create mode 100644 drivers/gpu/drm/tyr/reset.rs
 create mode 100644 drivers/gpu/drm/tyr/reset/hw_gate.rs
 create mode 100644 rust/helpers/srcu.c
 create mode 100644 rust/kernel/sync/srcu.rs

-- 
2.51.2

[PATCH v2 3/4] rust: add Work::disable_sync

[Onur Özkan]

Adds Work::disable_sync() as a safe wrapper for disable_work_sync().

Drivers can use this during teardown to stop new queueing and wait for
queued or running work to finish before dropping related resources.

Signed-off-by: Onur Özkan <work@onurozkan.dev>
---
 rust/kernel/workqueue/mod.rs | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/rust/kernel/workqueue/mod.rs b/rust/kernel/workqueue/mod.rs
index e30c21214a81..7f63d778146e 100644
--- a/rust/kernel/workqueue/mod.rs
+++ b/rust/kernel/workqueue/mod.rs
@@ -582,6 +582,21 @@ pub unsafe fn raw_get(ptr: *const Self) -> *mut bindings::work_struct {
         // the compiler does not complain that the `work` field is unused.
         unsafe { Opaque::cast_into(core::ptr::addr_of!((*ptr).work)) }
     }
+
+    /// Disables this work item and waits for queued/running executions to finish.
+    ///
+    /// # Note
+    ///
+    /// Should be called from a sleepable context if the work was last queued on a non-BH
+    /// workqueue.
+    #[inline]
+    pub fn disable_sync(&self) {
+        let ptr: *const Self = self;
+        // SAFETY: `self` points to a valid initialized work.
+        let raw_work = unsafe { Self::raw_get(ptr) };
+        // SAFETY: `raw_work` is a valid embedded `work_struct`.
+        unsafe { bindings::disable_work_sync(raw_work) };
+    }
 }
 
 /// Declares that a type contains a [`Work<T, ID>`].
-- 
2.51.2

[PATCH v2 4/4] drm/tyr: add reset management API

[Onur Özkan]

Add Tyr reset handling on top of the Rust SRCU abstraction and use
a hardware gate to serialize reset-sensitive accesses against asynchronous
reset work.

This introduces `ResetHandle`, `HwGate`, and `HwGuard`, runs reset work
on a dedicated ordered workqueue and drains in-flight accesses before
running the reset sequence.

Signed-off-by: Onur Özkan <work@onurozkan.dev>
---
 drivers/gpu/drm/tyr/driver.rs        |  40 +---
 drivers/gpu/drm/tyr/reset.rs         | 293 +++++++++++++++++++++++++++
 drivers/gpu/drm/tyr/reset/hw_gate.rs | 155 ++++++++++++++
 drivers/gpu/drm/tyr/tyr.rs           |   1 +
 4 files changed, 459 insertions(+), 30 deletions(-)
 create mode 100644 drivers/gpu/drm/tyr/reset.rs
 create mode 100644 drivers/gpu/drm/tyr/reset/hw_gate.rs

diff --git a/drivers/gpu/drm/tyr/driver.rs b/drivers/gpu/drm/tyr/driver.rs
index 246bc3cb8580..178e48ccd434 100644
--- a/drivers/gpu/drm/tyr/driver.rs
+++ b/drivers/gpu/drm/tyr/driver.rs
@@ -6,11 +6,8 @@
         OptionalClk, //
     },
     device::{
-        Bound,
         Core,
-        Device, //
     },
-    devres::Devres,
     dma::{
         Device as DmaDevice,
         DmaMask, //
@@ -21,10 +18,6 @@
         ioctl,
         UnregisteredDevice, //
     },
-    io::{
-        poll,
-        Io, //
-    },
     new_mutex,
     of,
     platform,
@@ -37,17 +30,16 @@
         Arc,
         Mutex, //
     },
-    time, //
 };
 
 use crate::{
     file::TyrDrmFileData,
     fw::Firmware,
     gem::BoData,
-    gpu,
     gpu::GpuInfo,
     mmu::Mmu,
-    regs::gpu_control::*, //
+    regs::gpu_control::*,
+    reset, //
 };
 
 pub(crate) type IoMem = kernel::io::mem::IoMem<SZ_2M>;
@@ -62,6 +54,11 @@
 
 #[pin_data]
 pub(crate) struct TyrDrmDeviceData {
+    // `ResetHandle::drop()` drains queued/running works and this must happen
+    // before clocks/regulators are dropped. So keep this field before them to
+    // ensure the correct drop order.
+    pub(crate) reset: reset::ResetHandle,
+
     pub(crate) pdev: ARef<platform::Device>,
 
     pub(crate) fw: Arc<Firmware>,
@@ -90,24 +87,6 @@ unsafe impl Send for TyrDrmDeviceData {}
 // SAFETY: This will be removed in a future patch.
 unsafe impl Sync for TyrDrmDeviceData {}
 
-fn issue_soft_reset(dev: &Device<Bound>, iomem: &Devres<IoMem>) -> Result {
-    let io = (*iomem).access(dev)?;
-    io.write_reg(GPU_COMMAND::reset(ResetMode::SoftReset));
-
-    poll::read_poll_timeout(
-        || {
-            let io = (*iomem).access(dev)?;
-            Ok(io.read(GPU_IRQ_RAWSTAT))
-        },
-        |status| status.reset_completed(),
-        time::Delta::from_millis(1),
-        time::Delta::from_millis(100),
-    )
-    .inspect_err(|_| dev_err!(dev, "GPU reset failed."))?;
-
-    Ok(())
-}
-
 kernel::of_device_table!(
     OF_TABLE,
     MODULE_OF_TABLE,
@@ -140,8 +119,7 @@ fn probe(
         let request = pdev.io_request_by_index(0).ok_or(ENODEV)?;
         let iomem = Arc::pin_init(request.iomap_sized::<SZ_2M>(), GFP_KERNEL)?;
 
-        issue_soft_reset(pdev.as_ref(), &iomem)?;
-        gpu::l2_power_on(pdev.as_ref(), &iomem)?;
+        reset::run_reset(pdev.as_ref(), &iomem)?;
 
         let gpu_info = GpuInfo::new(pdev.as_ref(), &iomem)?;
         gpu_info.log(pdev.as_ref());
@@ -156,6 +134,7 @@ fn probe(
 
         let uninit_ddev = UnregisteredDevice::<TyrDrmDriver>::new(pdev.as_ref())?;
         let platform: ARef<platform::Device> = pdev.into();
+        let reset = reset::ResetHandle::new(platform.clone(), iomem.clone())?;
 
         let mmu = Mmu::new(pdev, iomem.as_arc_borrow(), &gpu_info)?;
 
@@ -181,6 +160,7 @@ fn probe(
                     _mali: mali_regulator,
                     _sram: sram_regulator,
                 }),
+                reset,
                 gpu_info,
         });
 
diff --git a/drivers/gpu/drm/tyr/reset.rs b/drivers/gpu/drm/tyr/reset.rs
new file mode 100644
index 000000000000..906051a1c667
--- /dev/null
+++ b/drivers/gpu/drm/tyr/reset.rs
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+
+//! Provides asynchronous reset handling for the Tyr DRM driver via [`ResetHandle`]
+//! which runs reset work on a dedicated ordered workqueue and avoids duplicate
+//! pending resets.
+//!
+//! # High-level Execution Flow
+//!
+//! ```
+//!  User code                  Reset worker
+//!  ----------                 ------------
+//!  schedule()                 reset_work()
+//!    - Idle -> Pending          - Pending -> InProgress
+//!    - enqueue reset work       - synchronize() (wait for older accesses)
+//!                               - pre_reset() on reset managed hardware
+//!                               - run_reset()
+//!                               - post_reset() on reset managed hardware
+//!                               - epoch++, InProgress -> Idle
+//!                               - InProgress -> Idle
+//! ```
+
+mod hw_gate;
+
+use hw_gate::HwGate;
+
+use kernel::{
+    device::{
+        Bound,
+        Device, //
+    },
+    devres::Devres,
+    io::{
+        poll,
+        Io, //
+    },
+    platform,
+    prelude::*,
+    sync::{
+        aref::ARef,
+        atomic::AtomicType,
+        Arc, //
+    },
+    time,
+    workqueue::{
+        self,
+        OwnedQueue,
+        Queue,
+        Work, //
+    },
+};
+
+use crate::{
+    driver::IoMem,
+    gpu,
+    regs::gpu_control::*, //
+};
+
+/// Lifecycle state of the reset worker.
+#[derive(Clone, Copy, Debug, PartialEq, Eq)]
+#[repr(i32)]
+enum ResetState {
+    /// No reset is pending or in progress.
+    Idle = 0,
+    /// A reset has been scheduled but has not started executing yet.
+    Pending = 1,
+    /// The reset worker is actively resetting the hardware.
+    InProgress = 2,
+}
+
+// SAFETY: `ResetState` and `i32` have the same size and alignment, and are
+// round-trip transmutable.
+unsafe impl AtomicType for ResetState {
+    type Repr = i32;
+}
+
+/// Trait for the reset-managed hardware.
+///
+/// [`ActiveHwState`] groups the hardware blocks that implement this trait
+/// and defines their pre-reset and post-reset hook sequence.
+///
+/// Once reset scheduling flips the gate out of [`ResetState::Idle`], the reset
+/// worker first drains any pre-existing SRCU readers before running pre_reset()
+// and post_reset() hooks.
+///
+/// `pre_reset()` is infallible and returning `Err` from `post_reset()` is treated
+/// as a reset-cycle failure.
+pub(crate) trait Resettable: Send + Sync {
+    /// Called before the reset sequence starts and the hardware is reset.
+    ///
+    /// Before this is called, the reset worker waits for all pre-existing
+    /// hardware accesses to complete.
+    fn pre_reset(&self);
+
+    /// Called after the hardware reset completes.
+    ///
+    /// `reset_failed` is `true` if an earlier stage in the current reset cycle
+    /// has already failed. Returning `Err` fails the entire cycle.
+    fn post_reset(&self, reset_failed: bool) -> Result;
+}
+
+/// Reset-managed hardware state coordinated by [`HwGate`].
+///
+/// Groups the driver components that must quiesce before a GPU reset and resume
+/// afterwards. The [`Resettable`] implementation defines the pre-reset and post-reset
+/// hook sequence for those components.
+struct ActiveHwState {
+    // mmu: Arc<Mmu>,
+}
+
+impl Resettable for ActiveHwState {
+    fn pre_reset(&self) {
+        // self.mmu.pre_reset();
+    }
+
+    fn post_reset(&self, _reset_failed: bool) -> Result {
+        // self.mmu.post_reset()?;
+        Ok(())
+    }
+}
+
+/// Internal reset orchestrator that owns the gate and work item.
+#[pin_data]
+struct Controller {
+    /// Platform device reference needed for reset operations and logging.
+    pdev: ARef<platform::Device>,
+    /// Mapped register space needed for reset operations.
+    iomem: Arc<Devres<IoMem>>,
+    /// Access gate for reset managed hardware users.
+    #[pin]
+    hw: HwGate<ActiveHwState>,
+    /// Work item backing async reset processing.
+    #[pin]
+    work: Work<Controller>,
+}
+
+kernel::impl_has_work! {
+    impl HasWork<Controller> for Controller { self.work }
+}
+
+impl workqueue::WorkItem for Controller {
+    type Pointer = Arc<Self>;
+
+    fn run(this: Arc<Self>) {
+        this.reset_work();
+    }
+}
+
+impl Controller {
+    /// Creates an [`Arc<Controller>`] ready for use.
+    fn new(pdev: ARef<platform::Device>, iomem: Arc<Devres<IoMem>>) -> Result<Arc<Self>> {
+        Arc::pin_init(
+            try_pin_init!(Self {
+                pdev,
+                iomem,
+                hw <- HwGate::new(ActiveHwState {}),
+                work <- kernel::new_work!("tyr::reset"),
+            }),
+            GFP_KERNEL,
+        )
+    }
+
+    /// Processes one scheduled reset request.
+    ///
+    /// If the pending reset cannot be claimed, the worker returns immediately.
+    ///
+    /// It first claims [`ResetState::Pending`], then waits for earlier hardware
+    /// accesses to complete before running the pre-reset hook. After that it issues
+    /// the hardware reset, runs the post-reset hooks and finally returns the gate to
+    /// the [`ResetState::Idle`] state.
+    ///
+    /// Panthor reference:
+    /// - drivers/gpu/drm/panthor/panthor_device.c::panthor_device_reset_work()
+    fn reset_work(self: &Arc<Self>) {
+        if !self.hw.start_reset() {
+            // Another reset is already pending or in progress, so we skip this one.
+            return;
+        }
+
+        dev_info!(self.pdev.as_ref(), "Starting GPU reset.\n");
+
+        // Wait for all hardware accesses that started before reset became
+        // visible to finish before running the reset callbacks.
+        self.hw.synchronize();
+
+        self.hw.pre_reset();
+
+        // SAFETY: `Controller` is part of driver-private data and only exists
+        // while the platform device is bound.
+        let pdev = unsafe { self.pdev.as_ref().as_bound() };
+
+        let mut reset_failed = false;
+        if let Err(e) = run_reset(pdev, &self.iomem) {
+            reset_failed = true;
+            dev_err!(self.pdev.as_ref(), "GPU reset failed: {:?}\n", e);
+        }
+
+        if let Err(_e) = self.hw.post_reset(reset_failed) {
+            // TODO: Unplug the GPU.
+            // There is no API for unplugging the GPU and this is unreachable
+            // for now since there are no hardware users for reset API.
+        }
+
+        if reset_failed {
+            dev_err!(self.pdev.as_ref(), "GPU reset cycle failed.\n");
+        } else {
+            dev_info!(self.pdev.as_ref(), "GPU reset completed.\n");
+        }
+
+        self.hw.finish_reset();
+    }
+}
+
+/// User-facing handle for scheduling resets.
+///
+/// Dropping the handle drains any queued or in-flight reset work to ensure a
+/// clean teardown before clocks and regulators are released.
+pub(crate) struct ResetHandle {
+    controller: Arc<Controller>,
+    wq: OwnedQueue,
+}
+
+impl ResetHandle {
+    /// Creates [`ResetHandle`].
+    pub(crate) fn new(pdev: ARef<platform::Device>, iomem: Arc<Devres<IoMem>>) -> Result<Self> {
+        Ok(Self {
+            controller: Controller::new(pdev, iomem)?,
+            wq: Queue::new_ordered().build(c"tyr-reset-wq")?,
+        })
+    }
+
+    /// Schedules a GPU reset on the dedicated workqueue.
+    ///
+    /// If a reset is already pending or in progress the call is a no-op.
+    #[expect(dead_code)]
+    pub(crate) fn schedule(&self) {
+        // TODO: Similar to `panthor_device_schedule_reset()` in Panthor, add a
+        // power management check once Tyr supports it.
+
+        // Keep only one reset request running or queued. If one is already pending,
+        // we ignore new schedule requests.
+        if self.controller.hw.begin_reset() && self.wq.enqueue(self.controller.clone()).is_err() {
+            self.controller.hw.cancel_reset();
+        }
+    }
+}
+
+impl Drop for ResetHandle {
+    fn drop(&mut self) {
+        // Drain queued/running work and block future queueing attempts for this
+        // work item before clocks/regulators are cleaned up.
+        self.controller.work.disable_sync();
+    }
+}
+
+/// Issues a soft reset command and waits for reset-complete IRQ status.
+fn issue_soft_reset(dev: &Device<Bound>, iomem: &Devres<IoMem>) -> Result {
+    let io = (*iomem).access(dev)?;
+
+    // Clear any stale reset-complete IRQ state before issuing a new soft reset.
+    io.write_reg(GPU_IRQ_CLEAR::zeroed().with_reset_completed(true));
+
+    io.write_reg(GPU_COMMAND::reset(ResetMode::SoftReset));
+
+    poll::read_poll_timeout(
+        || {
+            let io = (*iomem).access(dev)?;
+            Ok(io.read(GPU_IRQ_RAWSTAT))
+        },
+        |status| status.reset_completed(),
+        time::Delta::from_millis(1),
+        time::Delta::from_millis(100),
+    )
+    .inspect_err(|_| dev_err!(dev, "GPU reset timed out."))?;
+
+    Ok(())
+}
+
+/// Runs one synchronous GPU reset pass.
+///
+/// Its visibility is `pub(super)` only so the probe path can run an
+/// initial reset; it is not part of this module's public API.
+///
+/// On success, the GPU is left in a state suitable for reinitialization.
+///
+/// The sequence is as follows:
+///   - Trigger a GPU soft reset.
+///   - Wait for the reset-complete IRQ status.
+///   - Power L2 back on.
+pub(super) fn run_reset(dev: &Device<Bound>, iomem: &Devres<IoMem>) -> Result {
+    issue_soft_reset(dev, iomem)?;
+    gpu::l2_power_on(dev, iomem)?;
+    Ok(())
+}
diff --git a/drivers/gpu/drm/tyr/reset/hw_gate.rs b/drivers/gpu/drm/tyr/reset/hw_gate.rs
new file mode 100644
index 000000000000..ff304ca127f3
--- /dev/null
+++ b/drivers/gpu/drm/tyr/reset/hw_gate.rs
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+
+//! SRCU based hardware access gate.
+//!
+//! This module provides [`HwGate`] which is a generic, SRCU based gate
+//! that serialises hardware access against asynchronous reset cycles.
+
+use super::{
+    ResetState,
+    Resettable, //
+};
+
+use kernel::{
+    prelude::*,
+    sync::{
+        atomic::{
+            Atomic,
+            Relaxed, //
+        },
+        srcu, Srcu,
+    },
+};
+
+use core::ops::Deref;
+
+/// A gate that coordinates hardware access with asynchronous resets.
+#[pin_data]
+pub(crate) struct HwGate<T: Resettable> {
+    #[pin]
+    srcu: Srcu,
+    state: Atomic<ResetState>,
+    epoch: Atomic<u64>,
+    hw: T,
+}
+
+impl<T: Resettable> HwGate<T> {
+    /// Creates a new gate for the given `hw` in [`ResetState::Idle`] state.
+    pub(super) fn new(hw: T) -> impl PinInit<Self, Error> {
+        try_pin_init!(Self {
+            srcu <- kernel::new_srcu!(),
+            state: Atomic::new(ResetState::Idle),
+            epoch: Atomic::new(0),
+            hw,
+        })
+    }
+
+    /// Tries to acquire the hardware access guard.
+    ///
+    /// Returns [`EBUSY`] if a reset is pending or in progress.
+    pub(crate) fn try_access(&self) -> Result<HwGuard<'_, T>> {
+        let srcu = self.srcu.read_lock();
+
+        if self.state.load(Relaxed) != ResetState::Idle {
+            return Err(EBUSY);
+        }
+
+        let epoch = self.epoch.load(Relaxed);
+
+        Ok(HwGuard {
+            hw: &self.hw,
+            epoch,
+            _srcu: srcu,
+        })
+    }
+
+    /// Runs `f` with [`HwGuard`], failing fast with [`EBUSY`] if a reset is
+    /// pending or in progress.
+    #[expect(dead_code)]
+    pub(crate) fn with_hw<R>(&self, f: impl FnOnce(&HwGuard<'_, T>) -> Result<R>) -> Result<R> {
+        let guard = self.try_access()?;
+        f(&guard)
+    }
+
+    /// Transitions from [`ResetState::Idle`] to [`ResetState::Pending`].
+    ///
+    /// Returns `true` if the transition succeeded (i.e. no reset was already
+    /// scheduled).
+    pub(super) fn begin_reset(&self) -> bool {
+        self.state
+            .cmpxchg(ResetState::Idle, ResetState::Pending, Relaxed)
+            .is_ok()
+    }
+
+    /// Transitions from [`ResetState::Pending`] to [`ResetState::InProgress`].
+    ///
+    /// Returns `true` if the transition succeeded.
+    pub(super) fn start_reset(&self) -> bool {
+        self.state
+            .cmpxchg(ResetState::Pending, ResetState::InProgress, Relaxed)
+            .is_ok()
+    }
+
+    /// Transitions from [`ResetState::InProgress`] to [`ResetState::Idle`]
+    /// and bumps the epoch.
+    pub(super) fn finish_reset(&self) {
+        self.epoch.fetch_add(1, Relaxed);
+        self.state.store(ResetState::Idle, Relaxed);
+    }
+
+    /// Transitions from [`ResetState::Pending`] to [`ResetState::Idle`].
+    pub(super) fn cancel_reset(&self) {
+        self.state.store(ResetState::Idle, Relaxed);
+    }
+
+    /// Waits for all pre-existing SRCU readers to complete.
+    ///
+    /// This must only be called from the reset worker after the state has left
+    /// [`ResetState::Idle`], so that no new readers can enter.
+    pub(super) fn synchronize(&self) {
+        self.srcu.synchronize();
+    }
+}
+
+impl<T: Resettable> Resettable for HwGate<T> {
+    fn pre_reset(&self) {
+        self.hw.pre_reset()
+    }
+
+    fn post_reset(&self, reset_failed: bool) -> Result {
+        self.hw.post_reset(reset_failed)
+    }
+}
+
+/// A hardware guard that is only present when the hardware is accessible.
+///
+/// Holding a [`HwGuard`] means the hardware is still in use and prevents
+/// the reset path from proceeding. The reset worker waits for all active
+/// guards to be dropped before it continues with the reset.
+#[must_use = "the hardware guard must be kept alive while using reset-sensitive state"]
+pub(crate) struct HwGuard<'a, T> {
+    hw: &'a T,
+    epoch: u64,
+    _srcu: srcu::Guard<'a>,
+}
+
+impl<T> HwGuard<'_, T> {
+    /// Returns the epoch at which this guard was acquired.
+    ///
+    /// This is a snapshot of [`HwGate`]'s epoch counter taken when the guard
+    /// was acquired. The gate increments that counter each time a reset cycle
+    /// completes. Callers can compare epochs from separate access windows to
+    /// detect whether a reset happened in between.
+    #[expect(dead_code)]
+    pub(crate) fn epoch(&self) -> u64 {
+        self.epoch
+    }
+}
+
+impl<T> Deref for HwGuard<'_, T> {
+    type Target = T;
+
+    fn deref(&self) -> &Self::Target {
+        self.hw
+    }
+}
diff --git a/drivers/gpu/drm/tyr/tyr.rs b/drivers/gpu/drm/tyr/tyr.rs
index 18b0668bb217..d0349bc49f27 100644
--- a/drivers/gpu/drm/tyr/tyr.rs
+++ b/drivers/gpu/drm/tyr/tyr.rs
@@ -14,6 +14,7 @@
 mod gpu;
 mod mmu;
 mod regs;
+mod reset;
 mod slot;
 mod vm;
 
-- 
2.51.2

Re: [PATCH v2 0/4] drm/tyr: implement GPU reset API

[Onur Özkan]

On Thu, 16 Apr 2026 20:17:26 +0300
Onur Özkan <work@onurozkan.dev> wrote:

> This series adds GPU reset handling support for Tyr in a new module
> drivers/gpu/drm/tyr/driver.rs which encapsulates the low-level reset
> controller internals and exposes a ResetHandle API to the driver.
> 
> This series is based on Alice's "Creation of workqueues in Rust" [1]
> series.
> 
> Changes since v1:
>   - Removed OrderedQueue and using Alice's workqueue implementation [1] instead.
>   - Added Resettable trait with pre_reset and post_reset hooks to be implemented by
>     reset-managed hardwares.
>   - Added SRCU abstraction and used it to synchronize the reset work and hardware access.
> 
> 3 important points:
>   - There is no hardware using this API yet.
>   - On post_reset() failure, we don't do anything for now. We should unplug the GPU (that's
>     what Panthor does) but we don't have the infrastructure for that yet (see [2]).
>   - In schedule(), similar to panthor_device_schedule_reset(), we should have a PM check
>     but similar to the note above, we don't have the infrastructure for that yet.
> 
> Link: https://lore.kernel.org/all/20260312-create-workqueue-v4-0-ea39c351c38f@google.com/ [1]
> Link: https://gitlab.freedesktop.org/panfrost/linux/-/work_items/29#note_3391826 [2]
> Link: https://gitlab.freedesktop.org/panfrost/linux/-/issues/28
> 
> Onur Özkan (4):
>   rust: add SRCU abstraction
>   MAINTAINERS: add Rust SRCU files to SRCU entry
>   rust: add Work::disable_sync
>   drm/tyr: add reset management API
> 
>  MAINTAINERS                          |   3 +
>  drivers/gpu/drm/tyr/driver.rs        |  40 +---
>  drivers/gpu/drm/tyr/reset.rs         | 293 +++++++++++++++++++++++++++
>  drivers/gpu/drm/tyr/reset/hw_gate.rs | 155 ++++++++++++++
>  drivers/gpu/drm/tyr/tyr.rs           |   1 +
>  rust/helpers/helpers.c               |   1 +
>  rust/helpers/srcu.c                  |  18 ++
>  rust/kernel/sync.rs                  |   2 +
>  rust/kernel/sync/srcu.rs             | 109 ++++++++++
>  rust/kernel/workqueue/mod.rs         |  15 ++
>  10 files changed, 607 insertions(+), 30 deletions(-)
>  create mode 100644 drivers/gpu/drm/tyr/reset.rs
>  create mode 100644 drivers/gpu/drm/tyr/reset/hw_gate.rs
>  create mode 100644 rust/helpers/srcu.c
>  create mode 100644 rust/kernel/sync/srcu.rs
> 
> -- 
> 2.51.2
> 

I messed up when sending the series (part of it was sent as a separate series
[1]. I will resend this properly, sorry for the noise.

[1]: https://lore.kernel.org/all/20260416171728.205141-1-work@onurozkan.dev/

-Onur

[PATCH v2 RESEND 1/4] rust: add SRCU abstraction

[Onur Özkan]

Add a Rust abstraction for sleepable RCU (SRCU), backed by
srcu_struct. Provide FFI helpers and a safe wrapper with a
guard-based API for read-side critical sections.

Signed-off-by: Onur Özkan <work@onurozkan.dev>
---
 rust/helpers/helpers.c   |   1 +
 rust/helpers/srcu.c      |  18 +++++++
 rust/kernel/sync.rs      |   2 +
 rust/kernel/sync/srcu.rs | 109 +++++++++++++++++++++++++++++++++++++++
 4 files changed, 130 insertions(+)
 create mode 100644 rust/helpers/srcu.c
 create mode 100644 rust/kernel/sync/srcu.rs

diff --git a/rust/helpers/helpers.c b/rust/helpers/helpers.c
index 875a9788ad40..052fef89d5f0 100644
--- a/rust/helpers/helpers.c
+++ b/rust/helpers/helpers.c
@@ -60,6 +60,7 @@
 #include "signal.c"
 #include "slab.c"
 #include "spinlock.c"
+#include "srcu.c"
 #include "sync.c"
 #include "task.c"
 #include "time.c"
diff --git a/rust/helpers/srcu.c b/rust/helpers/srcu.c
new file mode 100644
index 000000000000..b372b733eb89
--- /dev/null
+++ b/rust/helpers/srcu.c
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/srcu.h>
+
+__rust_helper int rust_helper_init_srcu_struct(struct srcu_struct *ssp)
+{
+	return init_srcu_struct(ssp);
+}
+
+__rust_helper int rust_helper_srcu_read_lock(struct srcu_struct *ssp)
+{
+	return srcu_read_lock(ssp);
+}
+
+__rust_helper void rust_helper_srcu_read_unlock(struct srcu_struct *ssp, int idx)
+{
+	srcu_read_unlock(ssp, idx);
+}
\ No newline at end of file
diff --git a/rust/kernel/sync.rs b/rust/kernel/sync.rs
index 993dbf2caa0e..0d6a5f1300c3 100644
--- a/rust/kernel/sync.rs
+++ b/rust/kernel/sync.rs
@@ -21,6 +21,7 @@
 pub mod rcu;
 mod refcount;
 mod set_once;
+pub mod srcu;
 
 pub use arc::{Arc, ArcBorrow, UniqueArc};
 pub use completion::Completion;
@@ -31,6 +32,7 @@
 pub use locked_by::LockedBy;
 pub use refcount::Refcount;
 pub use set_once::SetOnce;
+pub use srcu::Srcu;
 
 /// Represents a lockdep class.
 ///
diff --git a/rust/kernel/sync/srcu.rs b/rust/kernel/sync/srcu.rs
new file mode 100644
index 000000000000..cf0c16248ea3
--- /dev/null
+++ b/rust/kernel/sync/srcu.rs
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+
+//! Sleepable read-copy update (SRCU) abstraction.
+//!
+//! C header: [`include/linux/srcu.h`](srctree/include/linux/srcu.h)
+
+use crate::{
+    bindings,
+    error::to_result,
+    prelude::*,
+    types::{
+        NotThreadSafe,
+        Opaque, //
+    },
+};
+
+use pin_init::pin_data;
+
+/// Creates an [`Srcu`] initialiser.
+#[macro_export]
+macro_rules! new_srcu {
+    () => {
+        $crate::sync::Srcu::new()
+    };
+}
+
+/// Sleepable read-copy update primitive.
+///
+/// SRCU readers may sleep while holding the read-side guard.
+#[repr(transparent)]
+#[pin_data(PinnedDrop)]
+pub struct Srcu {
+    #[pin]
+    inner: Opaque<bindings::srcu_struct>,
+}
+
+impl Srcu {
+    /// Creates a new SRCU instance.
+    pub fn new() -> impl PinInit<Self, Error> {
+        try_pin_init!(Self {
+            inner <- Opaque::try_ffi_init(|ptr: *mut bindings::srcu_struct| {
+                // SAFETY: `ptr` points to valid uninitialised memory for a `srcu_struct`.
+                to_result(unsafe { bindings::init_srcu_struct(ptr) })
+            }),
+        })
+    }
+
+    /// Enters an SRCU read-side critical section.
+    pub fn read_lock(&self) -> Guard<'_> {
+        // SAFETY: By the type invariants, `self.inner.get()` is a valid initialized `srcu_struct`.
+        let idx = unsafe { bindings::srcu_read_lock(self.inner.get()) };
+
+        Guard {
+            srcu: self,
+            idx,
+            _nts: NotThreadSafe,
+        }
+    }
+
+    /// Waits until all pre-existing SRCU readers have completed.
+    pub fn synchronize(&self) {
+        // SAFETY: By the type invariants, `self.inner.get()` is a valid initialized `srcu_struct`.
+        unsafe { bindings::synchronize_srcu(self.inner.get()) };
+    }
+
+    /// Waits until all pre-existing SRCU readers have completed, expedited.
+    ///
+    /// This requests a lower-latency grace period than [`Srcu::synchronize`] typically
+    /// at the cost of higher system-wide overhead. Prefer [`Srcu::synchronize`] by default
+    /// and use this variant only when reducing reset or teardown latency is more important
+    /// than the extra cost.
+    pub fn synchronize_expedited(&self) {
+        // SAFETY: By the type invariants, `self.inner.get()` is a valid initialized `srcu_struct`.
+        unsafe { bindings::synchronize_srcu_expedited(self.inner.get()) };
+    }
+}
+
+#[pinned_drop]
+impl PinnedDrop for Srcu {
+    fn drop(self: Pin<&mut Self>) {
+        // SAFETY: `self` is pinned and `inner` contains a valid initialized `srcu_struct`.
+        unsafe { bindings::cleanup_srcu_struct(self.as_ref().get_ref().inner.get()) };
+    }
+}
+
+// SAFETY: `srcu_struct` may be shared and used across threads.
+unsafe impl Send for Srcu {}
+// SAFETY: `srcu_struct` may be shared and used concurrently.
+unsafe impl Sync for Srcu {}
+
+/// Guard for an active SRCU read-side critical section on a particular [`Srcu`].
+pub struct Guard<'a> {
+    srcu: &'a Srcu,
+    idx: core::ffi::c_int,
+    _nts: NotThreadSafe,
+}
+
+impl Guard<'_> {
+    /// Explicitly exits the SRCU read-side critical section.
+    pub fn unlock(self) {}
+}
+
+impl Drop for Guard<'_> {
+    fn drop(&mut self) {
+        // SAFETY: `Guard` is only constructible through `Srcu::read_lock()`,
+        // which returns a valid index for the SRCU instance.
+        unsafe { bindings::srcu_read_unlock(self.srcu.inner.get(), self.idx) };
+    }
+}
-- 
2.51.2

[PATCH v2 RESEND 2/4] MAINTAINERS: add Rust SRCU files to SRCU entry

[Onur Özkan]

Add the Rust SRCU helper and abstraction files to the SRCU
entry and add Onur Özkan as a maintainer for the Rust SRCU
pieces.

Signed-off-by: Onur Özkan <work@onurozkan.dev>
---
 MAINTAINERS | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 353f221c12e1..f38ef80c5e69 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -24403,6 +24403,7 @@ F:	drivers/net/can/slcan/
 
 SLEEPABLE READ-COPY UPDATE (SRCU)
 M:	Lai Jiangshan <jiangshanlai@gmail.com>
+M:	Onur Özkan <work@onurozkan.dev> (RUST)
 M:	"Paul E. McKenney" <paulmck@kernel.org>
 M:	Josh Triplett <josh@joshtriplett.org>
 R:	Steven Rostedt <rostedt@goodmis.org>
@@ -24413,6 +24414,8 @@ W:	http://www.rdrop.com/users/paulmck/RCU/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux.git rcu/dev
 F:	include/linux/srcu*.h
 F:	kernel/rcu/srcu*.c
+F:	rust/helpers/srcu.c
+F:	rust/kernel/sync/srcu.rs
 
 SMACK SECURITY MODULE
 M:	Casey Schaufler <casey@schaufler-ca.com>
-- 
2.51.2

Re: [PATCH v2 0/4] drm/tyr: implement GPU reset API

[Boqun Feng]

On Thu, Apr 16, 2026 at 08:23:45PM +0300, Onur Özkan wrote:
> On Thu, 16 Apr 2026 20:17:26 +0300
> Onur Özkan <work@onurozkan.dev> wrote:
> 
> > This series adds GPU reset handling support for Tyr in a new module
> > drivers/gpu/drm/tyr/driver.rs which encapsulates the low-level reset
> > controller internals and exposes a ResetHandle API to the driver.
> > 
> > This series is based on Alice's "Creation of workqueues in Rust" [1]
> > series.
> > 
> > Changes since v1:
> >   - Removed OrderedQueue and using Alice's workqueue implementation [1] instead.
> >   - Added Resettable trait with pre_reset and post_reset hooks to be implemented by
> >     reset-managed hardwares.
> >   - Added SRCU abstraction and used it to synchronize the reset work and hardware access.
> > 
> > 3 important points:
> >   - There is no hardware using this API yet.
> >   - On post_reset() failure, we don't do anything for now. We should unplug the GPU (that's
> >     what Panthor does) but we don't have the infrastructure for that yet (see [2]).
> >   - In schedule(), similar to panthor_device_schedule_reset(), we should have a PM check
> >     but similar to the note above, we don't have the infrastructure for that yet.
> > 
> > Link: https://lore.kernel.org/all/20260312-create-workqueue-v4-0-ea39c351c38f@google.com/ [1]
> > Link: https://gitlab.freedesktop.org/panfrost/linux/-/work_items/29#note_3391826 [2]
> > Link: https://gitlab.freedesktop.org/panfrost/linux/-/issues/28
> > 
> > Onur Özkan (4):
> >   rust: add SRCU abstraction
> >   MAINTAINERS: add Rust SRCU files to SRCU entry
> >   rust: add Work::disable_sync
> >   drm/tyr: add reset management API
> > 
> >  MAINTAINERS                          |   3 +
> >  drivers/gpu/drm/tyr/driver.rs        |  40 +---
> >  drivers/gpu/drm/tyr/reset.rs         | 293 +++++++++++++++++++++++++++
> >  drivers/gpu/drm/tyr/reset/hw_gate.rs | 155 ++++++++++++++
> >  drivers/gpu/drm/tyr/tyr.rs           |   1 +
> >  rust/helpers/helpers.c               |   1 +
> >  rust/helpers/srcu.c                  |  18 ++
> >  rust/kernel/sync.rs                  |   2 +
> >  rust/kernel/sync/srcu.rs             | 109 ++++++++++
> >  rust/kernel/workqueue/mod.rs         |  15 ++
> >  10 files changed, 607 insertions(+), 30 deletions(-)
> >  create mode 100644 drivers/gpu/drm/tyr/reset.rs
> >  create mode 100644 drivers/gpu/drm/tyr/reset/hw_gate.rs
> >  create mode 100644 rust/helpers/srcu.c
> >  create mode 100644 rust/kernel/sync/srcu.rs
> > 
> > -- 
> > 2.51.2
> > 
> 
> I messed up when sending the series (part of it was sent as a separate series
> [1]. I will resend this properly, sorry for the noise.
> 

FWIW, I didn't receive your patch #3 (even from my subscription on
rust-for-linux list).

Could you add a doc test for disable_sync(), I'm curious about it
because you may disable a work that has not be executed yet, and
wouldn't that be leaking memory (IIUC, we rely on Arc::drop() in
WorkItemPointer::run() to decrease the refcounts), but maybe I'm missing
something subtle.

Regards,
Boqun

> [1]: https://lore.kernel.org/all/20260416171728.205141-1-work@onurozkan.dev/
> 
> -Onur
> 

Re: [PATCH v2 0/4] drm/tyr: implement GPU reset API

[Onur Özkan]

On Thu, 16 Apr 2026 11:45:56 -0700
Boqun Feng <boqun@kernel.org> wrote:

> On Thu, Apr 16, 2026 at 08:23:45PM +0300, Onur Özkan wrote:
> > On Thu, 16 Apr 2026 20:17:26 +0300
> > Onur Özkan <work@onurozkan.dev> wrote:
> > 
> > > This series adds GPU reset handling support for Tyr in a new module
> > > drivers/gpu/drm/tyr/driver.rs which encapsulates the low-level reset
> > > controller internals and exposes a ResetHandle API to the driver.
> > > 
> > > This series is based on Alice's "Creation of workqueues in Rust" [1]
> > > series.
> > > 
> > > Changes since v1:
> > >   - Removed OrderedQueue and using Alice's workqueue implementation [1] instead.
> > >   - Added Resettable trait with pre_reset and post_reset hooks to be implemented by
> > >     reset-managed hardwares.
> > >   - Added SRCU abstraction and used it to synchronize the reset work and hardware access.
> > > 
> > > 3 important points:
> > >   - There is no hardware using this API yet.
> > >   - On post_reset() failure, we don't do anything for now. We should unplug the GPU (that's
> > >     what Panthor does) but we don't have the infrastructure for that yet (see [2]).
> > >   - In schedule(), similar to panthor_device_schedule_reset(), we should have a PM check
> > >     but similar to the note above, we don't have the infrastructure for that yet.
> > > 
> > > Link: https://lore.kernel.org/all/20260312-create-workqueue-v4-0-ea39c351c38f@google.com/ [1]
> > > Link: https://gitlab.freedesktop.org/panfrost/linux/-/work_items/29#note_3391826 [2]
> > > Link: https://gitlab.freedesktop.org/panfrost/linux/-/issues/28
> > > 
> > > Onur Özkan (4):
> > >   rust: add SRCU abstraction
> > >   MAINTAINERS: add Rust SRCU files to SRCU entry
> > >   rust: add Work::disable_sync
> > >   drm/tyr: add reset management API
> > > 
> > >  MAINTAINERS                          |   3 +
> > >  drivers/gpu/drm/tyr/driver.rs        |  40 +---
> > >  drivers/gpu/drm/tyr/reset.rs         | 293 +++++++++++++++++++++++++++
> > >  drivers/gpu/drm/tyr/reset/hw_gate.rs | 155 ++++++++++++++
> > >  drivers/gpu/drm/tyr/tyr.rs           |   1 +
> > >  rust/helpers/helpers.c               |   1 +
> > >  rust/helpers/srcu.c                  |  18 ++
> > >  rust/kernel/sync.rs                  |   2 +
> > >  rust/kernel/sync/srcu.rs             | 109 ++++++++++
> > >  rust/kernel/workqueue/mod.rs         |  15 ++
> > >  10 files changed, 607 insertions(+), 30 deletions(-)
> > >  create mode 100644 drivers/gpu/drm/tyr/reset.rs
> > >  create mode 100644 drivers/gpu/drm/tyr/reset/hw_gate.rs
> > >  create mode 100644 rust/helpers/srcu.c
> > >  create mode 100644 rust/kernel/sync/srcu.rs
> > > 
> > > -- 
> > > 2.51.2
> > > 
> > 
> > I messed up when sending the series (part of it was sent as a separate series
> > [1]. I will resend this properly, sorry for the noise.
> > 
> 
> FWIW, I didn't receive your patch #3 (even from my subscription on
> rust-for-linux list).
> 

Interesting, it's actually sent to rust-for-linux list [1]. But yeah, I totally
messed up with sending this series...

[1]: https://lore.kernel.org/all/20260416171728.205141-2-work@onurozkan.dev/

> Could you add a doc test for disable_sync(), I'm curious about it
> because you may disable a work that has not be executed yet, and
> wouldn't that be leaking memory (IIUC, we rely on Arc::drop() in
> WorkItemPointer::run() to decrease the refcounts), but maybe I'm missing
> something subtle.

I was expecting the C call to handle the teardown properly over the pointer but
I wasn't aware about the Rust side internals on the workqueue abstraction. I
will check that in more detail during next week and I will definitely add the
test on v3.

Thanks,
Onur

> 
> Regards,
> Boqun
> 
> > [1]: https://lore.kernel.org/all/20260416171728.205141-1-work@onurozkan.dev/
> > 
> > -Onur
> >