Rust for Linux List
 help / color / mirror / Atom feed
* [PATCH 0/2] rust: honor the maximum DMA segment size
@ 2026-08-31 23:32 Matteo Kloiber
  2026-08-31 23:32 ` [PATCH 1/2] gpu: nova-core: declare unlimited DMA max " Matteo Kloiber
  2026-08-31 23:32 ` [PATCH 2/2] rust: scatterlist: honor the device's maximum " Matteo Kloiber
  0 siblings, 2 replies; 3+ messages in thread
From: Matteo Kloiber @ 2026-08-31 23:32 UTC (permalink / raw)
  To: dakr, acourbot
  Cc: aliceryhl, ojeda, airlied, simona, abdiel.janulgue,
	daniel.almeida, robin.murphy, a.hindborg, nova-gpu, dri-devel,
	driver-core, rust-for-linux, linux-kernel, Matteo Kloiber

Booting nova-core against a real GSP with CONFIG_DMA_API_DEBUG=y warns
when the ~60 MiB firmware image is mapped as a scatter-gather table:

  DMA-API: nova-core 0000:00:03.0: mapping sg segment longer than
  device claims to support [len=62914560] [max=65536]

There are two separate issues behind it.

Patch 1 has nova-core declare the segment size it actually supports. It
re-decomposes every segment into 4 KiB GSP page-table entries, so it has
no upper bound on segment length.

Furthermore, I also checked what other GPUs do, and most do the same:
set the max segment size u32::MAX. So this should be the correct
behavior for nova as well.

Patch 2 has SGTable::new() honor dma_get_max_seg_size() in addition to
dma_max_mapping_size(). The abstraction is generic, so a driver with a
real hardware segment limit would otherwise silently be handed segments
it cannot express in a single descriptor.

Tested on an RTX 5080 (GB203) passed through to a QEMU guest via VFIO
with CONFIG_DMA_API_DEBUG=y: the warning is gone, and GSP boot and RPC
still work.

Discussed on Zulip:
https://rust-for-linux.zulipchat.com/#narrow/channel/509436-Nova/topic/nova.20core.3A.20DMA-API.3A.20nova-core.200000.3A00.3A03.2E0.3A.20mapping.20sg.20segme/with/618319830

Matteo Kloiber (2):
  gpu: nova-core: declare unlimited DMA max segment size
  rust: scatterlist: honor the device's maximum segment size

 drivers/gpu/nova-core/gpu.rs |  7 +++++++
 rust/helpers/dma.c           |  5 +++++
 rust/kernel/scatterlist.rs   | 12 ++++++++++--
 3 files changed, 22 insertions(+), 2 deletions(-)

base-commit: cee9395acd8043be0644b25c34bfa86623f2b935
-- 
2.51.2


^ permalink raw reply	[flat|nested] 3+ messages in thread

* [PATCH 1/2] gpu: nova-core: declare unlimited DMA max segment size
  2026-08-31 23:32 [PATCH 0/2] rust: honor the maximum DMA segment size Matteo Kloiber
@ 2026-08-31 23:32 ` Matteo Kloiber
  2026-08-31 23:32 ` [PATCH 2/2] rust: scatterlist: honor the device's maximum " Matteo Kloiber
  1 sibling, 0 replies; 3+ messages in thread
From: Matteo Kloiber @ 2026-08-31 23:32 UTC (permalink / raw)
  To: dakr, acourbot
  Cc: aliceryhl, ojeda, airlied, simona, abdiel.janulgue,
	daniel.almeida, robin.murphy, a.hindborg, nova-gpu, dri-devel,
	driver-core, rust-for-linux, linux-kernel, Matteo Kloiber

The PCI default max_seg_size is 64 KiB. nova-core never raises it, so
mapping the GSP firmware image (~60 MiB) as a scatter-gather table
triggers a DMA-API debug warning when contiguous pages coalesce into
segments that exceed the default:

  DMA-API: nova-core 0000:00:03.0: mapping sg segment longer than
  device claims to support [len=62914560] [max=65536]

CONFIG_DMA_API_DEBUG=y is required to see this warning.

Signed-off-by: Matteo Kloiber <kernel@matt3o12.de>
Assisted-by: Claude:claude-opus-4-8
---
 drivers/gpu/nova-core/gpu.rs | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/nova-core/gpu.rs b/drivers/gpu/nova-core/gpu.rs
index fd1414004dd0..233ef2dc9688 100644
--- a/drivers/gpu/nova-core/gpu.rs
+++ b/drivers/gpu/nova-core/gpu.rs
@@ -343,6 +343,13 @@ pub(crate) fn new<'a>(
                 // still constructing it, so no concurrent DMA allocations can exist.
                 unsafe { pdev.dma_set_mask_and_coherent(dma_mask)? };
 
+                // Nova re-decomposes SG segments into 4 KiB page-table entries, so it
+                // has no upper bound on segment length; declare that to the DMA layer.
+                //
+                // SAFETY: same invariant as above -- still constructing, no concurrent
+                // DMA mapping can exist.
+                unsafe { pdev.dma_set_max_seg_size(u32::MAX) };
+
                 hal.wait_gfw_boot_completion(bar)
                     .inspect_err(|_| dev_err!(dev, "GFW boot did not complete\n"))?;
             },
-- 
2.51.2


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* [PATCH 2/2] rust: scatterlist: honor the device's maximum segment size
  2026-08-31 23:32 [PATCH 0/2] rust: honor the maximum DMA segment size Matteo Kloiber
  2026-08-31 23:32 ` [PATCH 1/2] gpu: nova-core: declare unlimited DMA max " Matteo Kloiber
@ 2026-08-31 23:32 ` Matteo Kloiber
  1 sibling, 0 replies; 3+ messages in thread
From: Matteo Kloiber @ 2026-08-31 23:32 UTC (permalink / raw)
  To: dakr, acourbot
  Cc: aliceryhl, ojeda, airlied, simona, abdiel.janulgue,
	daniel.almeida, robin.murphy, a.hindborg, nova-gpu, dri-devel,
	driver-core, rust-for-linux, linux-kernel, Matteo Kloiber

SGTable::new() caps segment length at dma_max_mapping_size() only, which
limits the DMA mapping path (e.g. swiotlb), not the device itself. The
per-device limit from dma_set_max_seg_size() is ignored, so contiguous
page segments can be longer than the declared max segment size,
potentially causing problems for future drivers that use this
abstraction.

nova-core declares an unlimited segment size, so this does not change
its behavior.

Fixes: 05aa6fb1c21d ("rust: scatterlist: Add abstraction for sg_table")
Signed-off-by: Matteo Kloiber <kernel@matt3o12.de>
---
 rust/helpers/dma.c         |  5 +++++
 rust/kernel/scatterlist.rs | 12 ++++++++++--
 2 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/rust/helpers/dma.c b/rust/helpers/dma.c
index 9fbeb507b08c..ff8f24dae9df 100644
--- a/rust/helpers/dma.c
+++ b/rust/helpers/dma.c
@@ -49,3 +49,8 @@ __rust_helper void rust_helper_dma_set_max_seg_size(struct device *dev,
 {
 	dma_set_max_seg_size(dev, size);
 }
+
+__rust_helper unsigned int rust_helper_dma_get_max_seg_size(struct device *dev)
+{
+	return dma_get_max_seg_size(dev);
+}
diff --git a/rust/kernel/scatterlist.rs b/rust/kernel/scatterlist.rs
index b83c468b5c63..d677dcbe7aac 100644
--- a/rust/kernel/scatterlist.rs
+++ b/rust/kernel/scatterlist.rs
@@ -350,15 +350,23 @@ fn new(
             page_vec.push(page.as_ptr(), flags)?;
         }
 
+        // Cap segments at both the DMA mapping-path limit and the device's declared
+        // max segment size.
+        //
         // `dma_max_mapping_size` returns `size_t`, but `sg_alloc_table_from_pages_segment()` takes
         // an `unsigned int`.
         //
         // SAFETY: `dev.as_raw()` is a valid pointer to a `struct device`.
-        let max_segment = match unsafe { bindings::dma_max_mapping_size(dev.as_raw()) } {
+        let max_mapping = match unsafe { bindings::dma_max_mapping_size(dev.as_raw()) } {
             0 => u32::MAX,
-            max_segment => u32::try_from(max_segment).unwrap_or(u32::MAX),
+            max_mapping => u32::try_from(max_mapping).unwrap_or(u32::MAX),
         };
 
+        // SAFETY: `dev.as_raw()` is a valid pointer to a `struct device`.
+        let max_seg_size = unsafe { bindings::dma_get_max_seg_size(dev.as_raw()) };
+
+        let max_segment = max_mapping.min(max_seg_size);
+
         Ok(try_pin_init!(&this in Self {
             // SAFETY:
             // - `page_vec` is a `KVec` of valid `struct page *` obtained from `pages`.
-- 
2.51.2


^ permalink raw reply related	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2026-08-31 23:41 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-08-31 23:32 [PATCH 0/2] rust: honor the maximum DMA segment size Matteo Kloiber
2026-08-31 23:32 ` [PATCH 1/2] gpu: nova-core: declare unlimited DMA max " Matteo Kloiber
2026-08-31 23:32 ` [PATCH 2/2] rust: scatterlist: honor the device's maximum " Matteo Kloiber

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox