* [GIT PULL] ARM: at91: dt for 5.17
@ 2021-12-13 16:14 nicolas.ferre
2021-12-13 23:30 ` patchwork-bot+linux-soc
0 siblings, 1 reply; 2+ messages in thread
From: nicolas.ferre @ 2021-12-13 16:14 UTC (permalink / raw)
To: Arnd Bergmann, Olof Johansson, arm, soc
Cc: Nicolas Ferre, Linux Kernel list, linux-arm-kernel,
Alexandre Belloni, Ludovic Desroches, Claudiu Beznea,
Tudor Ambarus, Hari Prasath
From: Nicolas Ferre <nicolas.ferre@microchip.com>
Arnd, Olof,
Here are the dt changes for 5.17.
The QSPI nodes have their bindings translated to YAML and updated here:
https://lore.kernel.org/lkml/20211209122939.339810-1-tudor.ambarus@microchip.com/
They are not merged yet but I see no major push back as of today.
Moreover, one of the low priority fix below remove one of the error highlighted
during the conversion to YAML.
Thanks, best regards,
Nicolas
The following changes since commit fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf:
Linux 5.16-rc1 (2021-11-14 13:56:52 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux.git tags/at91-dt-5.17
for you to fetch changes up to 078c2a0e8e60bb3fe78cf50b5da1620a4e13e0cd:
ARM: dts: at91: sama7g5ek: Add QSPI0 node (2021-12-13 14:48:04 +0100)
----------------------------------------------------------------
AT91 DT #1 for 5.17:
- 2 low priority fixes about pin function for sama7g5 and better
tailored mmc interface on sama5d2 xplained
- Addition of the Microchip EVB-KSZ9477: a Gigabit Ethernet
managed Switch Evaluation Board
- QSPI: addition of sama5d2 clock name and nodes for new sama7g7 and its
associated Evaluation Kit
----------------------------------------------------------------
Hari Prasath (1):
ARM: dts: at91: update alternate function of signal PD20
Mihai Sain (1):
ARM: dts: at91: sama5d2_xplained: remove PA11__SDMMC0_VDDSEL from pinctrl
Oleksij Rempel (1):
ARM: dts: at91: add Microchip EVB-KSZ9477 board
Tudor Ambarus (3):
ARM: dts: at91: sama5d2: Name the qspi clock
ARM: dts: at91: sama7g5: Add QSPI nodes
ARM: dts: at91: sama7g5ek: Add QSPI0 node
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 5 +-
arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts | 209 +++++++++++++++++++++++++
arch/arm/boot/dts/at91-sama7g5ek.dts | 73 +++++++++
arch/arm/boot/dts/sama5d2.dtsi | 2 +
arch/arm/boot/dts/sama7g5-pinfunc.h | 2 +-
arch/arm/boot/dts/sama7g5.dtsi | 30 ++++
7 files changed, 318 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [GIT PULL] ARM: at91: dt for 5.17
2021-12-13 16:14 [GIT PULL] ARM: at91: dt for 5.17 nicolas.ferre
@ 2021-12-13 23:30 ` patchwork-bot+linux-soc
0 siblings, 0 replies; 2+ messages in thread
From: patchwork-bot+linux-soc @ 2021-12-13 23:30 UTC (permalink / raw)
To: Nicolas Ferre; +Cc: soc
Hello:
This pull request was applied to soc/soc.git (for-next)
by Arnd Bergmann <arnd@arndb.de>:
On Mon, 13 Dec 2021 17:14:51 +0100 you wrote:
> From: Nicolas Ferre <nicolas.ferre@microchip.com>
>
> Arnd, Olof,
>
> Here are the dt changes for 5.17.
> The QSPI nodes have their bindings translated to YAML and updated here:
> https://lore.kernel.org/lkml/20211209122939.339810-1-tudor.ambarus@microchip.com/
> They are not merged yet but I see no major push back as of today.
> Moreover, one of the low priority fix below remove one of the error highlighted
> during the conversion to YAML.
>
> [...]
Here is the summary with links:
- [GIT,PULL] ARM: at91: dt for 5.17
https://git.kernel.org/soc/soc/c/7b7320905a59
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-12-13 23:30 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-12-13 16:14 [GIT PULL] ARM: at91: dt for 5.17 nicolas.ferre
2021-12-13 23:30 ` patchwork-bot+linux-soc
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox