Linux SOC development
 help / color / mirror / Atom feed
* [GIT PULL] amlogic ARM64 DT updates for v7.3
@ 2026-07-31 15:59 Neil Armstrong
  2026-08-08 20:20 ` patchwork-bot+linux-soc
  0 siblings, 1 reply; 2+ messages in thread
From: Neil Armstrong @ 2026-07-31 15:59 UTC (permalink / raw)
  To: soc, arm; +Cc: linux-amlogic, linux-arm-kernel

Hi,

Here's the Amlogic ARM64 DT changes for v7.3, contains some overall
indentation cleanups for the Amlogic DTS, some new features support
for Amlogic A7 & A1 (clk measure), A9 (pinctrl, gpio-irq) and some
fixups for AXG to only enable PCIe on the S400 board.

Thanks,
Neil

The following changes since commit dc59e4fea9d83f03bad6bddf3fa2e52491777482:

   Linux 7.2-rc1 (2026-06-28 12:01:31 -0700)

are available in the Git repository at:

   https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git tags/amlogic-arm64-dt-for-v7.3

for you to fetch changes up to 7f1d0cc86cb70fa550163b6f70fd1d484c03218e:

   arm64: dts: amlogic: meson-axg-s400: enable mipi_pcie_analog_dphy for PCIe (2026-07-20 14:31:02 +0200)

----------------------------------------------------------------
Amlogic ARM64 DT for v7.3:
- Amlogic AXG fixups for PCIe and NAND
- Overall indentation and whitespace fixups
- Amlogic A9 Pinctrl & GPIO IRQ nodes
- Clock measure nodes for Amlogic T7 & A1

----------------------------------------------------------------
Jian Hu (2):
       arm64: dts: meson: a1: Add clk measure support
       arm64: dts: amlogic: t7: Add clk measure support

Jun Yan (4):
       arm64: dts: amlogic: meson-axg: Disable nfc node by default
       arm64: dts: amlogic: meson-axg: Add missing nand_rb0 pin to nand_all_pins
       arm64: dts: amlogic: meson-axg: Disable pcie_phy node by default
       arm64: dts: amlogic: meson-axg-s400: enable mipi_pcie_analog_dphy for PCIe

Krzysztof Kozlowski (1):
       arm64: dts: amlogic: Correct indentation and whitespace

Xianwei Zhao (1):
       arm64: dts: amlogic: add some device nodes for A9

  arch/arm64/boot/dts/amlogic/amlogic-a9.dtsi        | 140 +++++++++++++++++++++
  arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi        |   5 +
  arch/arm64/boot/dts/amlogic/meson-a1.dtsi          |   5 +
  arch/arm64/boot/dts/amlogic/meson-axg-s400.dts     |   8 ++
  arch/arm64/boot/dts/amlogic/meson-axg.dtsi         |   5 +-
  arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi  |  38 +++---
  .../boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts |   2 +-
  arch/arm64/boot/dts/amlogic/meson-gxl.dtsi         |   2 +-
  8 files changed, 183 insertions(+), 22 deletions(-)

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [GIT PULL] amlogic ARM64 DT updates for v7.3
  2026-07-31 15:59 [GIT PULL] amlogic ARM64 DT updates for v7.3 Neil Armstrong
@ 2026-08-08 20:20 ` patchwork-bot+linux-soc
  0 siblings, 0 replies; 2+ messages in thread
From: patchwork-bot+linux-soc @ 2026-08-08 20:20 UTC (permalink / raw)
  To: Neil Armstrong; +Cc: soc

Hello:

This pull request was applied to soc/soc.git (for-next)
by Alexandre Belloni <alexandre.belloni@bootlin.com>:

On Fri, 31 Jul 2026 17:59:43 +0200 you wrote:
> Hi,
> 
> Here's the Amlogic ARM64 DT changes for v7.3, contains some overall
> indentation cleanups for the Amlogic DTS, some new features support
> for Amlogic A7 & A1 (clk measure), A9 (pinctrl, gpio-irq) and some
> fixups for AXG to only enable PCIe on the S400 board.
> 
> [...]

Here is the summary with links:
  - [GIT,PULL] amlogic ARM64 DT updates for v7.3
    https://git.kernel.org/soc/soc/c/307b9caae6e6

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html



^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2026-08-08 20:21 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-07-31 15:59 [GIT PULL] amlogic ARM64 DT updates for v7.3 Neil Armstrong
2026-08-08 20:20 ` patchwork-bot+linux-soc

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox