From: "Marek Behún" <kabel@kernel.org>
To: "Gregory CLEMENT" <gregory.clement@bootlin.com>,
"Andrew Lunn" <andrew@lunn.ch>, "Arnd Bergmann" <arnd@arndb.de>,
soc@kernel.org, arm@kernel.org,
"Andy Shevchenko" <andy@kernel.org>,
"Hans de Goede" <hdegoede@redhat.com>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Cc: "Marek Behún" <kabel@kernel.org>
Subject: [PATCH 08/19] firmware: turris-mox-rwtm: Use kobj_type's default_groups member for automatic sysfs files creation
Date: Wed, 12 Jun 2024 15:54:32 +0200 [thread overview]
Message-ID: <20240612135443.30239-9-kabel@kernel.org> (raw)
In-Reply-To: <20240612135443.30239-1-kabel@kernel.org>
Put the turris-mox-rwtm attribute group into the .default_groups
member of the underlying kobject type and drop the manual
sysfs_create_files() / sysfs_remove_files(). The kobject library will
take care of this in it's internal code.
Signed-off-by: Marek Behún <kabel@kernel.org>
---
drivers/firmware/turris-mox-rwtm.c | 71 ++++++++++++++----------------
1 file changed, 32 insertions(+), 39 deletions(-)
diff --git a/drivers/firmware/turris-mox-rwtm.c b/drivers/firmware/turris-mox-rwtm.c
index 5675f94a3ff2..441409fefc59 100644
--- a/drivers/firmware/turris-mox-rwtm.c
+++ b/drivers/firmware/turris-mox-rwtm.c
@@ -113,6 +113,36 @@ static inline struct mox_rwtm *to_rwtm(struct kobject *kobj)
return container_of(kobj, struct mox_kobject, kobj)->rwtm;
}
+#define MOX_ATTR_RO(name, format, cat) \
+static ssize_t \
+name##_show(struct kobject *kobj, struct kobj_attribute *a, \
+ char *buf) \
+{ \
+ struct mox_rwtm *rwtm = to_rwtm(kobj); \
+ if (!rwtm->has_##cat) \
+ return -ENODATA; \
+ return sprintf(buf, format, rwtm->name); \
+} \
+static struct kobj_attribute mox_attr_##name = __ATTR_RO(name)
+
+MOX_ATTR_RO(serial_number, "%016llX\n", board_info);
+MOX_ATTR_RO(board_version, "%i\n", board_info);
+MOX_ATTR_RO(ram_size, "%i\n", board_info);
+MOX_ATTR_RO(mac_address1, "%pM\n", board_info);
+MOX_ATTR_RO(mac_address2, "%pM\n", board_info);
+MOX_ATTR_RO(pubkey, "%s\n", pubkey);
+
+static struct attribute *mox_rwtm_attrs[] = {
+ &mox_attr_serial_number.attr,
+ &mox_attr_board_version.attr,
+ &mox_attr_ram_size.attr,
+ &mox_attr_mac_address1.attr,
+ &mox_attr_mac_address2.attr,
+ &mox_attr_pubkey.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(mox_rwtm);
+
static void mox_kobj_release(struct kobject *kobj)
{
kfree(to_rwtm(kobj)->kobj);
@@ -121,6 +151,7 @@ static void mox_kobj_release(struct kobject *kobj)
static const struct kobj_type mox_kobj_ktype = {
.release = mox_kobj_release,
.sysfs_ops = &kobj_sysfs_ops,
+ .default_groups = mox_rwtm_groups,
};
static int mox_kobj_create(struct mox_rwtm *rwtm)
@@ -140,25 +171,6 @@ static int mox_kobj_create(struct mox_rwtm *rwtm)
return 0;
}
-#define MOX_ATTR_RO(name, format, cat) \
-static ssize_t \
-name##_show(struct kobject *kobj, struct kobj_attribute *a, \
- char *buf) \
-{ \
- struct mox_rwtm *rwtm = to_rwtm(kobj); \
- if (!rwtm->has_##cat) \
- return -ENODATA; \
- return sprintf(buf, format, rwtm->name); \
-} \
-static struct kobj_attribute mox_attr_##name = __ATTR_RO(name)
-
-MOX_ATTR_RO(serial_number, "%016llX\n", board_info);
-MOX_ATTR_RO(board_version, "%i\n", board_info);
-MOX_ATTR_RO(ram_size, "%i\n", board_info);
-MOX_ATTR_RO(mac_address1, "%pM\n", board_info);
-MOX_ATTR_RO(mac_address2, "%pM\n", board_info);
-MOX_ATTR_RO(pubkey, "%s\n", pubkey);
-
static int mox_get_status(enum mbox_cmd cmd, u32 retval)
{
if (MBOX_STS_CMD(retval) != cmd)
@@ -173,16 +185,6 @@ static int mox_get_status(enum mbox_cmd cmd, u32 retval)
return MBOX_STS_VALUE(retval);
}
-static const struct attribute *mox_rwtm_attrs[] = {
- &mox_attr_serial_number.attr,
- &mox_attr_board_version.attr,
- &mox_attr_ram_size.attr,
- &mox_attr_mac_address1.attr,
- &mox_attr_mac_address2.attr,
- &mox_attr_pubkey.attr,
- NULL
-};
-
static void mox_rwtm_rx_callback(struct mbox_client *cl, void *data)
{
struct mox_rwtm *rwtm = dev_get_drvdata(cl->dev);
@@ -507,12 +509,6 @@ static int turris_mox_rwtm_probe(struct platform_device *pdev)
return ret;
}
- ret = sysfs_create_files(rwtm_to_kobj(rwtm), mox_rwtm_attrs);
- if (ret < 0) {
- dev_err(dev, "Cannot create sysfs files!\n");
- goto put_kobj;
- }
-
platform_set_drvdata(pdev, rwtm);
mutex_init(&rwtm->busy);
@@ -526,7 +522,7 @@ static int turris_mox_rwtm_probe(struct platform_device *pdev)
if (ret != -EPROBE_DEFER)
dev_err(dev, "Cannot request mailbox channel: %i\n",
ret);
- goto remove_files;
+ goto put_kobj;
}
init_completion(&rwtm->cmd_done);
@@ -564,8 +560,6 @@ static int turris_mox_rwtm_probe(struct platform_device *pdev)
free_channel:
mbox_free_channel(rwtm->mbox);
-remove_files:
- sysfs_remove_files(rwtm_to_kobj(rwtm), mox_rwtm_attrs);
put_kobj:
kobject_put(rwtm_to_kobj(rwtm));
return ret;
@@ -576,7 +570,6 @@ static void turris_mox_rwtm_remove(struct platform_device *pdev)
struct mox_rwtm *rwtm = platform_get_drvdata(pdev);
rwtm_unregister_debugfs(rwtm);
- sysfs_remove_files(rwtm_to_kobj(rwtm), mox_rwtm_attrs);
kobject_put(rwtm_to_kobj(rwtm));
mbox_free_channel(rwtm->mbox);
}
--
2.44.2
next prev parent reply other threads:[~2024-06-12 13:55 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-12 13:54 [PATCH 00/19] Updates for turris-mox-rwtm driver Marek Behún
2024-06-12 13:54 ` [PATCH 01/19] firmware: turris-mox-rwtm: Do not complete if there are no waiters Marek Behún
2024-06-12 13:54 ` [PATCH 02/19] firmware: turris-mox-rwtm: Fix checking return value of wait_for_completion_timeout() Marek Behún
2024-06-13 8:06 ` Ilpo Järvinen
2024-06-12 13:54 ` [PATCH 03/19] firmware: turris-mox-rwtm: Use PAGE_SIZE instead of hardcoded 4096 Marek Behún
2024-06-13 8:01 ` Ilpo Järvinen
2024-06-13 9:54 ` Marek Behún
2024-06-12 13:54 ` [PATCH 04/19] firmware: turris-mox-rwtm: Use ETH_ALEN instead of hardcoded 6 Marek Behún
2024-06-13 8:02 ` Ilpo Järvinen
2024-06-12 13:54 ` [PATCH 05/19] firmware: turris-mox-rwtm: Use the boolean type where appropriate Marek Behún
2024-06-12 13:54 ` [PATCH 06/19] firmware: turris-mox-rwtm: Hide signature related constants behind macros Marek Behún
2024-06-12 13:54 ` [PATCH 07/19] firmware: turris-mox-rwtm: Fix driver includes Marek Behún
2024-06-12 13:54 ` Marek Behún [this message]
2024-06-13 8:14 ` [PATCH 08/19] firmware: turris-mox-rwtm: Use kobj_type's default_groups member for automatic sysfs files creation Ilpo Järvinen
2024-06-12 13:54 ` [PATCH 09/19] firmware: turris-mox-rwtm: Simplify debugfs code Marek Behún
2024-06-12 13:54 ` [PATCH 10/19] firmware: turris-mox-rwtm: Simplify driver kobject code Marek Behún
2024-06-13 8:31 ` Ilpo Järvinen
2024-06-13 9:55 ` Marek Behún
2024-06-13 10:19 ` Ilpo Järvinen
2024-06-13 13:31 ` Marek Behún
2024-06-13 13:37 ` Ilpo Järvinen
2024-06-13 15:39 ` Marek Behún
2024-06-13 15:44 ` Ilpo Järvinen
2024-06-12 13:54 ` [PATCH 11/19] firmware: turris-mox-rwtm: Return true error code if kobject_add() fails Marek Behún
2024-06-12 13:54 ` [PATCH 12/19] firmware: turris-mox-rwtm: Convert rest to devm_* and get rid of driver .remove() Marek Behún
2024-06-12 13:54 ` [PATCH 13/19] firmware: turris-mox-rwtm: Use dev_err_probe() where possible Marek Behún
2024-06-12 13:54 ` [PATCH 14/19] firmware: turris-mox-rwtm: Rearrange probe calls Marek Behún
2024-06-12 13:54 ` [PATCH 15/19] firmware: turris-mox-rwtm: Drop redundant device pointer Marek Behún
2024-06-12 13:54 ` [PATCH 16/19] firmware: turris-mox-rwtm: Use devm_mutex_init() instead of mutex_init() Marek Behún
2024-06-12 13:54 ` [PATCH 17/19] firmware: turris-mox-rwtm: Use container_of() instead of hwrng .priv member Marek Behún
2024-06-12 13:54 ` [PATCH 18/19] firmware: turris-mox-rwtm: Deduplicate command execution code Marek Behún
2024-06-12 13:54 ` [PATCH 19/19] firmware: turris-mox-rwtm: Use EOPNOTSUPP instead of ENOSYS Marek Behún
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240612135443.30239-9-kabel@kernel.org \
--to=kabel@kernel.org \
--cc=andrew@lunn.ch \
--cc=andy@kernel.org \
--cc=arm@kernel.org \
--cc=arnd@arndb.de \
--cc=gregory.clement@bootlin.com \
--cc=hdegoede@redhat.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox