[GIT PULL 1/2] Broadcom devicetree changes for 6.14

[GIT PULL 1/2] Broadcom devicetree changes for 6.14

[Florian Fainelli]

The following changes since commit 40384c840ea1944d7c5a392e8975ed088ecf0b37:

  Linux 6.13-rc1 (2024-12-01 14:28:56 -0800)

are available in the Git repository at:

  https://github.com/Broadcom/stblinux.git tags/arm-soc/for-6.14/devicetree

for you to fetch changes up to f167292c8d13d31cbe9ffaa8108edcb4e8b1c60f:

  ARM: dts: meraki-mr26: set mac address for gmac0 (2024-12-17 10:23:28 -0800)

----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 6.14, please pull the following:

- Rob removes some unused and undocumented properties pertaining to the
  SPI flash controller on Broadcom boards

- Linus adds a number of BCM6846 peripherals: HWRNG, watchdog, GPIO,
  MDIO, LED controller, DMA and then proceeds with adding support for
  the GEnexsis XG6846B PON router

- Rosen sets the MAC address NVMEM reference on the Meraki MR26 platform

----------------------------------------------------------------
Linus Walleij (9):
      ARM: dts: bcm6846: Add iproc rng
      ARM: dts: bcm6846: Enable watchdog
      ARM: dts: bcm6846: Add GPIO blocks
      ARM: dts: bcm6846: Add MDIO control block
      ARM: dts: bcm6846: Add LED controller
      ARM: dts: bcm6846: Add ARM PL081 DMA block
      dt-bindings: vendor-prefixes: Add Genexis
      dt-bindings: arm: bcmbca: Add Genexis XG6846B
      ARM: dts: broadcom: Add Genexis XG6846B DTS file

Rob Herring (Arm) (1):
      arm: dts: broadcom: Remove unused and undocumented properties

Rosen Penev (1):
      ARM: dts: meraki-mr26: set mac address for gmac0

 .../devicetree/bindings/arm/bcm/brcm,bcmbca.yaml   |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
 arch/arm/boot/dts/broadcom/Makefile                |   1 +
 .../arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts |  20 ++
 .../dts/broadcom/bcm53340-ubnt-unifi-switch8.dts   |   1 -
 .../boot/dts/broadcom/bcm6846-genexis-xg6846b.dts  | 244 +++++++++++++++++++++
 arch/arm/boot/dts/broadcom/bcm6846.dtsi            | 120 ++++++++++
 arch/arm/boot/dts/broadcom/bcm953012hr.dts         |   1 -
 arch/arm/boot/dts/broadcom/bcm953012k.dts          |   1 -
 arch/arm/boot/dts/broadcom/bcm958522er.dts         |   1 -
 arch/arm/boot/dts/broadcom/bcm958525er.dts         |   1 -
 arch/arm/boot/dts/broadcom/bcm958525xmc.dts        |   1 -
 arch/arm/boot/dts/broadcom/bcm958622hr.dts         |   1 -
 arch/arm/boot/dts/broadcom/bcm958623hr.dts         |   1 -
 arch/arm/boot/dts/broadcom/bcm958625hr.dts         |   1 -
 arch/arm/boot/dts/broadcom/bcm958625k.dts          |   1 -
 arch/arm/boot/dts/broadcom/bcm988312hr.dts         |   1 -
 17 files changed, 388 insertions(+), 11 deletions(-)
 create mode 100644 arch/arm/boot/dts/broadcom/bcm6846-genexis-xg6846b.dts

[GIT PULL 2/2] Broadcom devicetree-arm64 changes for 6.14

[Florian Fainelli]

The following changes since commit 40384c840ea1944d7c5a392e8975ed088ecf0b37:

  Linux 6.13-rc1 (2024-12-01 14:28:56 -0800)

are available in the Git repository at:

  https://github.com/Broadcom/stblinux.git tags/arm-soc/for-6.14/devicetree-arm64

for you to fetch changes up to f5ce990af7cf9ced0b3459f3d9aed0a27a74d00c:

  arm64: dts: bcm4908: nvmem-layout conversion (2024-12-17 11:39:21 -0800)

----------------------------------------------------------------
This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 6.14:

- Dave adds the display pipeline DT nodes on BCM2712 (Raspberry Pi 5)

- Rob removes some undocumented properties

- Same ensures that the CFE stub area is reserved to allow secondary
  CPUs to be successfully brought up in Linux, also making sure that the
  address used in the spin table is also carved out. Finally he adds
  support for the Zyxel EX3510-B router using BCM4906

- Rosen converts the BCM4908 platforms to use the more flexible
  nvmem-layout representation

----------------------------------------------------------------
Dave Stevenson (3):
      arm64: dts: broadcom: Add firmware clocks and power nodes to Pi5 DT
      arm64: dts: broadcom: Add display pipeline support to BCM2712
      arm64: dts: broadcom: Add DT for D-step version of BCM2712

Rob Herring (Arm) (1):
      arm64: dts: broadcom: Remove unused and undocumented properties

Rosen Penev (1):
      arm64: dts: bcm4908: nvmem-layout conversion

Sam Edwards (4):
      arm64: dts: broadcom: bcmbca: bcm4908: Reserve CFE stub area
      arm64: dts: broadcom: bcmbca: bcm4908: Protect cpu-release-addr
      dt-bindings: arm64: bcmbca: Add Zyxel EX3510-B based on BCM4906
      arm64: dts: broadcom: bcmbca: bcm4908: Add DT for Zyxel EX3510-B

 .../devicetree/bindings/arm/bcm/brcm,bcmbca.yaml   |   1 +
 arch/arm64/boot/dts/broadcom/Makefile              |   1 +
 arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dts |  37 ++++
 arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts   |  42 +++++
 arch/arm64/boot/dts/broadcom/bcm2712.dtsi          | 193 +++++++++++++++++++-
 arch/arm64/boot/dts/broadcom/bcmbca/Makefile       |   1 +
 .../dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts |  12 +-
 .../dts/broadcom/bcmbca/bcm4906-zyxel-ex3510b.dts  | 196 +++++++++++++++++++++
 arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi   |  18 +-
 .../arm64/boot/dts/broadcom/northstar2/ns2-svk.dts |   2 -
 .../arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts |   1 -
 arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi   |   2 -
 12 files changed, 488 insertions(+), 18 deletions(-)
 create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dts
 create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-zyxel-ex3510b.dts

Re: [GIT PULL 1/2] Broadcom devicetree changes for 6.14

[patchwork-bot+linux-soc]

Hello:

This pull request was applied to soc/soc.git (for-next)
by Arnd Bergmann <arnd@arndb.de>:

On Thu,  9 Jan 2025 14:47:55 -0800 you wrote:
> The following changes since commit 40384c840ea1944d7c5a392e8975ed088ecf0b37:
> 
>   Linux 6.13-rc1 (2024-12-01 14:28:56 -0800)
> 
> are available in the Git repository at:
> 
>   https://github.com/Broadcom/stblinux.git tags/arm-soc/for-6.14/devicetree
> 
> [...]

Here is the summary with links:
  - [GIT,PULL,1/2] Broadcom devicetree changes for 6.14
    https://git.kernel.org/soc/soc/c/14d773bb96e2
  - [GIT,PULL,2/2] Broadcom devicetree-arm64 changes for 6.14
    https://git.kernel.org/soc/soc/c/ab6efed7ec87

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html