* [PATCH v4] clk: spacemit: k3: add CPU PLL rate tables @ 2026-09-03 3:06 Troy Mitchell 2026-09-03 17:27 ` Aurelien Jarno 2026-09-05 16:41 ` Anirudh Srinivasan 0 siblings, 2 replies; 5+ messages in thread From: Troy Mitchell @ 2026-09-03 3:06 UTC (permalink / raw) To: Michael Turquette, Inochi Amaoto, Alex Elder, Haylen Chu Cc: Aurelien Jarno, stable, Troy Mitchell, Stephen Boyd, Brian Masney, Jerome Brunet, Yixun Lan, Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti, linux-clk, linux-riscv, spacemit, linux-kernel The K3 CPU PLL rate tables currently describe only one rate per PLL, although the hardware supports a wider range. PLL3 and PLL4 support rates from 1.05 to 2.4 GHz, while PLL5 and PLL8 support rates from 1.05 to 2 GHz. Populate the tables with every supported rate in 50 MHz steps. Cc: stable@vger.kernel.org # 7.0+ Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com> --- The corresponding U-Boot changes are available at: - Add the CPU PLL rate tables: https://github.com/spacemit-com/uboot-2022.10/commit/787b5cf44c8dbc99db886d5522c0c9cd5a96ffd6 - Correct the 1.10 GHz and 2.15 GHz table entries: https://github.com/spacemit-com/uboot-2022.10/commit/16a775c20e9efb54ca55352215e76eb3f12e6cf0 --- Changes in v4: - Expand the update to every supported PLL3, PLL4, PLL5 and PLL8 rate. - Drop Aurelien Jarno's Reviewed-by and Tested-by trailers because the patch scope has expanded. - Add U-Boot references for the complete tables and corrected entries. - Link to v3: https://patch.msgid.link/20260831-k3-pll5-pll8-1800mhz-v3-1-530ed0978615@linux.spacemit.com Changes in v3: - Mark the change for stable kernels starting with v7.0. - Add Aurelien Jarno's Reviewed-by and Tested-by trailers. - Rebase onto v7.3-rc1. - Link to v2: https://patch.msgid.link/20260810-k3-pll5-pll8-1800mhz-v2-1-aabff510a797@linux.spacemit.com Changes in v2: - Drop "clk: spacemit: re-enable PLLs after init"; the PLL init issue will be handled in a separate series. - Send the K3 PLL5 and PLL8 1.8 GHz rate-table update as a standalone patch. - Clarify that 1.8 GHz is nominal and 2 GHz is an overclocking rate. - Link to v1: https://patch.msgid.link/20260804-k3-pll5-pll8-1800mhz-v1-0-a3a75866ce32@linux.spacemit.com To: Stephen Boyd <sboyd@kernel.org> To: Brian Masney <bmasney+clk@redhat.com> To: Jerome Brunet <jbrunet+clk@baylibre.com> To: Yixun Lan <dlan@kernel.org> To: Paul Walmsley <pjw@kernel.org> To: Palmer Dabbelt <palmer@dabbelt.com> To: Albert Ou <aou@eecs.berkeley.edu> To: Alexandre Ghiti <alex@ghiti.fr> Cc: linux-clk@vger.kernel.org Cc: linux-riscv@lists.infradead.org Cc: spacemit@lists.linux.dev Cc: linux-kernel@vger.kernel.org --- drivers/clk/spacemit/ccu-k3.c | 96 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 96 insertions(+) diff --git a/drivers/clk/spacemit/ccu-k3.c b/drivers/clk/spacemit/ccu-k3.c index 92b930d5ff30..950bf531c734 100644 --- a/drivers/clk/spacemit/ccu-k3.c +++ b/drivers/clk/spacemit/ccu-k3.c @@ -29,15 +29,91 @@ static const struct ccu_pll_rate_tbl pll2_rate_tbl[] = { CCU_PLLA_RATE(3000000000UL, 0x0b3e2000, 0x00000000, 0xa0558c8c), }; +/* Keep the firmware default as the first entry. */ static const struct ccu_pll_rate_tbl pll3_rate_tbl[] = { + CCU_PLLA_RATE(2000000000UL, 0x0b292aaa, 0x0000ab00, 0xa0558686), + CCU_PLLA_RATE(1050000000UL, 0x0b2b3000, 0x00000000, 0xa0458080), + CCU_PLLA_RATE(1100000000UL, 0x0b2d3555, 0x00005500, 0xa0458181), + CCU_PLLA_RATE(1150000000UL, 0x0b2f3aaa, 0x0000ab00, 0xa0458181), + CCU_PLLA_RATE(1200000000UL, 0x0b320000, 0x00000000, 0xa0458181), + CCU_PLLA_RATE(1250000000UL, 0x0b340555, 0x00005500, 0xa0458181), + CCU_PLLA_RATE(1300000000UL, 0x0b360aaa, 0x0000ab00, 0xa0458282), + CCU_PLLA_RATE(1350000000UL, 0x0b381000, 0x00000000, 0xa0458282), + CCU_PLLA_RATE(1400000000UL, 0x0b3a1555, 0x00005500, 0xa0458282), + CCU_PLLA_RATE(1450000000UL, 0x0b3c1aaa, 0x0000ab00, 0xa0458383), + CCU_PLLA_RATE(1500000000UL, 0x0b3e2000, 0x00000000, 0xa0458383), + CCU_PLLA_RATE(1550000000UL, 0x0b402555, 0x00005500, 0xa0458383), + CCU_PLLA_RATE(1600000000UL, 0x0b422aaa, 0x0000ab00, 0xa0458484), + CCU_PLLA_RATE(1650000000UL, 0x0b443000, 0x00000000, 0xa0458484), + CCU_PLLA_RATE(1700000000UL, 0x0b463555, 0x00005500, 0xa0458484), + CCU_PLLA_RATE(1750000000UL, 0x0b483aaa, 0x0000ab00, 0xa0458585), + CCU_PLLA_RATE(1800000000UL, 0x0b4b0000, 0x00000000, 0xa0458585), + CCU_PLLA_RATE(1850000000UL, 0x0b4d0555, 0x00005500, 0xa0458585), + CCU_PLLA_RATE(1900000000UL, 0x0b4f0aaa, 0x0000ab00, 0xa0458686), + CCU_PLLA_RATE(1950000000UL, 0x0b511000, 0x00000000, 0xa0458686), + CCU_PLLA_RATE(2050000000UL, 0x0b2a2d55, 0x00005500, 0xa0558686), + CCU_PLLA_RATE(2100000000UL, 0x0b2b3000, 0x00000000, 0xa0558787), + CCU_PLLA_RATE(2150000000UL, 0x0b2c32aa, 0x0000ab00, 0xa0558787), CCU_PLLA_RATE(2200000000UL, 0x0b2d3555, 0x00005500, 0xa0558787), + CCU_PLLA_RATE(2250000000UL, 0x0b2e3800, 0x00000000, 0xa0558888), + CCU_PLLA_RATE(2300000000UL, 0x0b2f3aaa, 0x0000ab00, 0xa0558888), + CCU_PLLA_RATE(2350000000UL, 0x0b303d55, 0x00005500, 0xa0558888), + CCU_PLLA_RATE(2400000000UL, 0x0b320000, 0x00000000, 0xa0558989), }; +/* Keep the firmware default as the first entry. */ static const struct ccu_pll_rate_tbl pll4_rate_tbl[] = { + CCU_PLLA_RATE(2000000000UL, 0x0b292aaa, 0x0000ab00, 0xa0558686), + CCU_PLLA_RATE(1050000000UL, 0x0b2b3000, 0x00000000, 0xa0458080), + CCU_PLLA_RATE(1100000000UL, 0x0b2d3555, 0x00005500, 0xa0458181), + CCU_PLLA_RATE(1150000000UL, 0x0b2f3aaa, 0x0000ab00, 0xa0458181), + CCU_PLLA_RATE(1200000000UL, 0x0b320000, 0x00000000, 0xa0458181), + CCU_PLLA_RATE(1250000000UL, 0x0b340555, 0x00005500, 0xa0458181), + CCU_PLLA_RATE(1300000000UL, 0x0b360aaa, 0x0000ab00, 0xa0458282), + CCU_PLLA_RATE(1350000000UL, 0x0b381000, 0x00000000, 0xa0458282), + CCU_PLLA_RATE(1400000000UL, 0x0b3a1555, 0x00005500, 0xa0458282), + CCU_PLLA_RATE(1450000000UL, 0x0b3c1aaa, 0x0000ab00, 0xa0458383), + CCU_PLLA_RATE(1500000000UL, 0x0b3e2000, 0x00000000, 0xa0458383), + CCU_PLLA_RATE(1550000000UL, 0x0b402555, 0x00005500, 0xa0458383), + CCU_PLLA_RATE(1600000000UL, 0x0b422aaa, 0x0000ab00, 0xa0458484), + CCU_PLLA_RATE(1650000000UL, 0x0b443000, 0x00000000, 0xa0458484), + CCU_PLLA_RATE(1700000000UL, 0x0b463555, 0x00005500, 0xa0458484), + CCU_PLLA_RATE(1750000000UL, 0x0b483aaa, 0x0000ab00, 0xa0458585), + CCU_PLLA_RATE(1800000000UL, 0x0b4b0000, 0x00000000, 0xa0458585), + CCU_PLLA_RATE(1850000000UL, 0x0b4d0555, 0x00005500, 0xa0458585), + CCU_PLLA_RATE(1900000000UL, 0x0b4f0aaa, 0x0000ab00, 0xa0458686), + CCU_PLLA_RATE(1950000000UL, 0x0b511000, 0x00000000, 0xa0458686), + CCU_PLLA_RATE(2050000000UL, 0x0b2a2d55, 0x00005500, 0xa0558686), + CCU_PLLA_RATE(2100000000UL, 0x0b2b3000, 0x00000000, 0xa0558787), + CCU_PLLA_RATE(2150000000UL, 0x0b2c32aa, 0x0000ab00, 0xa0558787), CCU_PLLA_RATE(2200000000UL, 0x0b2d3555, 0x00005500, 0xa0558787), + CCU_PLLA_RATE(2250000000UL, 0x0b2e3800, 0x00000000, 0xa0558888), + CCU_PLLA_RATE(2300000000UL, 0x0b2f3aaa, 0x0000ab00, 0xa0558888), + CCU_PLLA_RATE(2350000000UL, 0x0b303d55, 0x00005500, 0xa0558888), + CCU_PLLA_RATE(2400000000UL, 0x0b320000, 0x00000000, 0xa0558989), }; +/* Keep the firmware default as the first entry. */ static const struct ccu_pll_rate_tbl pll5_rate_tbl[] = { + CCU_PLLA_RATE(1800000000UL, 0x0b4b0000, 0x00000000, 0xa0458585), + CCU_PLLA_RATE(1050000000UL, 0x0b2b3000, 0x00000000, 0xa0458080), + CCU_PLLA_RATE(1100000000UL, 0x0b2d3555, 0x00005500, 0xa0458181), + CCU_PLLA_RATE(1150000000UL, 0x0b2f3aaa, 0x0000ab00, 0xa0458181), + CCU_PLLA_RATE(1200000000UL, 0x0b320000, 0x00000000, 0xa0458181), + CCU_PLLA_RATE(1250000000UL, 0x0b340555, 0x00005500, 0xa0458181), + CCU_PLLA_RATE(1300000000UL, 0x0b360aaa, 0x0000ab00, 0xa0458282), + CCU_PLLA_RATE(1350000000UL, 0x0b381000, 0x00000000, 0xa0458282), + CCU_PLLA_RATE(1400000000UL, 0x0b3a1555, 0x00005500, 0xa0458282), + CCU_PLLA_RATE(1450000000UL, 0x0b3c1aaa, 0x0000ab00, 0xa0458383), + CCU_PLLA_RATE(1500000000UL, 0x0b3e2000, 0x00000000, 0xa0458383), + CCU_PLLA_RATE(1550000000UL, 0x0b402555, 0x00005500, 0xa0458383), + CCU_PLLA_RATE(1600000000UL, 0x0b422aaa, 0x0000ab00, 0xa0458484), + CCU_PLLA_RATE(1650000000UL, 0x0b443000, 0x00000000, 0xa0458484), + CCU_PLLA_RATE(1700000000UL, 0x0b463555, 0x00005500, 0xa0458484), + CCU_PLLA_RATE(1750000000UL, 0x0b483aaa, 0x0000ab00, 0xa0458585), + CCU_PLLA_RATE(1850000000UL, 0x0b4d0555, 0x00005500, 0xa0458585), + CCU_PLLA_RATE(1900000000UL, 0x0b4f0aaa, 0x0000ab00, 0xa0458686), + CCU_PLLA_RATE(1950000000UL, 0x0b511000, 0x00000000, 0xa0458686), CCU_PLLA_RATE(2000000000UL, 0x0b292aaa, 0x0000ab00, 0xa0558686), }; @@ -49,7 +125,27 @@ static const struct ccu_pll_rate_tbl pll7_rate_tbl[] = { CCU_PLLA_RATE(2800000000UL, 0x0b3a1555, 0x00005500, 0xa0558b8b), }; +/* Keep the firmware default as the first entry. */ static const struct ccu_pll_rate_tbl pll8_rate_tbl[] = { + CCU_PLLA_RATE(1800000000UL, 0x0b4b0000, 0x00000000, 0xa0458585), + CCU_PLLA_RATE(1050000000UL, 0x0b2b3000, 0x00000000, 0xa0458080), + CCU_PLLA_RATE(1100000000UL, 0x0b2d3555, 0x00005500, 0xa0458181), + CCU_PLLA_RATE(1150000000UL, 0x0b2f3aaa, 0x0000ab00, 0xa0458181), + CCU_PLLA_RATE(1200000000UL, 0x0b320000, 0x00000000, 0xa0458181), + CCU_PLLA_RATE(1250000000UL, 0x0b340555, 0x00005500, 0xa0458181), + CCU_PLLA_RATE(1300000000UL, 0x0b360aaa, 0x0000ab00, 0xa0458282), + CCU_PLLA_RATE(1350000000UL, 0x0b381000, 0x00000000, 0xa0458282), + CCU_PLLA_RATE(1400000000UL, 0x0b3a1555, 0x00005500, 0xa0458282), + CCU_PLLA_RATE(1450000000UL, 0x0b3c1aaa, 0x0000ab00, 0xa0458383), + CCU_PLLA_RATE(1500000000UL, 0x0b3e2000, 0x00000000, 0xa0458383), + CCU_PLLA_RATE(1550000000UL, 0x0b402555, 0x00005500, 0xa0458383), + CCU_PLLA_RATE(1600000000UL, 0x0b422aaa, 0x0000ab00, 0xa0458484), + CCU_PLLA_RATE(1650000000UL, 0x0b443000, 0x00000000, 0xa0458484), + CCU_PLLA_RATE(1700000000UL, 0x0b463555, 0x00005500, 0xa0458484), + CCU_PLLA_RATE(1750000000UL, 0x0b483aaa, 0x0000ab00, 0xa0458585), + CCU_PLLA_RATE(1850000000UL, 0x0b4d0555, 0x00005500, 0xa0458585), + CCU_PLLA_RATE(1900000000UL, 0x0b4f0aaa, 0x0000ab00, 0xa0458686), + CCU_PLLA_RATE(1950000000UL, 0x0b511000, 0x00000000, 0xa0458686), CCU_PLLA_RATE(2000000000UL, 0x0b292aaa, 0x0000ab00, 0xa0558686), }; --- base-commit: cee9395acd8043be0644b25c34bfa86623f2b935 change-id: 20260802-k3-pll5-pll8-1800mhz-c81875a0a944 Best regards, -- Troy Mitchell <troy.mitchell@linux.spacemit.com> ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v4] clk: spacemit: k3: add CPU PLL rate tables 2026-09-03 3:06 [PATCH v4] clk: spacemit: k3: add CPU PLL rate tables Troy Mitchell @ 2026-09-03 17:27 ` Aurelien Jarno 2026-09-04 3:24 ` Troy Mitchell 2026-09-05 16:41 ` Anirudh Srinivasan 1 sibling, 1 reply; 5+ messages in thread From: Aurelien Jarno @ 2026-09-03 17:27 UTC (permalink / raw) To: Troy Mitchell Cc: Michael Turquette, Inochi Amaoto, Alex Elder, Haylen Chu, stable, Stephen Boyd, Brian Masney, Jerome Brunet, Yixun Lan, Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti, linux-clk, linux-riscv, spacemit, linux-kernel Hi Troy, On 2026-09-03 11:06, Troy Mitchell wrote: > The K3 CPU PLL rate tables currently describe only one rate per PLL, > although the hardware supports a wider range. > > PLL3 and PLL4 support rates from 1.05 to 2.4 GHz, while PLL5 and PLL8 > support rates from 1.05 to 2 GHz. Populate the tables with every > supported rate in 50 MHz steps. > > Cc: stable@vger.kernel.org # 7.0+ > Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com> > --- > The corresponding U-Boot changes are available at: > > - Add the CPU PLL rate tables: > https://github.com/spacemit-com/uboot-2022.10/commit/787b5cf44c8dbc99db886d5522c0c9cd5a96ffd6 > - Correct the 1.10 GHz and 2.15 GHz table entries: > https://github.com/spacemit-com/uboot-2022.10/commit/16a775c20e9efb54ca55352215e76eb3f12e6cf0 > --- > Changes in v4: > - Expand the update to every supported PLL3, PLL4, PLL5 and PLL8 rate. > - Drop Aurelien Jarno's Reviewed-by and Tested-by trailers because the > patch scope has expanded. > - Add U-Boot references for the complete tables and corrected entries. > - Link to v3: https://patch.msgid.link/20260831-k3-pll5-pll8-1800mhz-v3-1-530ed0978615@linux.spacemit.com > > Changes in v3: > - Mark the change for stable kernels starting with v7.0. > - Add Aurelien Jarno's Reviewed-by and Tested-by trailers. > - Rebase onto v7.3-rc1. > - Link to v2: https://patch.msgid.link/20260810-k3-pll5-pll8-1800mhz-v2-1-aabff510a797@linux.spacemit.com > > Changes in v2: > - Drop "clk: spacemit: re-enable PLLs after init"; the PLL init issue > will be handled in a separate series. > - Send the K3 PLL5 and PLL8 1.8 GHz rate-table update as a standalone > patch. > - Clarify that 1.8 GHz is nominal and 2 GHz is an overclocking rate. > - Link to v1: https://patch.msgid.link/20260804-k3-pll5-pll8-1800mhz-v1-0-a3a75866ce32@linux.spacemit.com > > To: Stephen Boyd <sboyd@kernel.org> > To: Brian Masney <bmasney+clk@redhat.com> > To: Jerome Brunet <jbrunet+clk@baylibre.com> > To: Yixun Lan <dlan@kernel.org> > To: Paul Walmsley <pjw@kernel.org> > To: Palmer Dabbelt <palmer@dabbelt.com> > To: Albert Ou <aou@eecs.berkeley.edu> > To: Alexandre Ghiti <alex@ghiti.fr> > Cc: linux-clk@vger.kernel.org > Cc: linux-riscv@lists.infradead.org > Cc: spacemit@lists.linux.dev > Cc: linux-kernel@vger.kernel.org > --- > drivers/clk/spacemit/ccu-k3.c | 96 +++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 96 insertions(+) Thanks for the patch, it makes sense to add all the values, to support future firmware changes. The values match the ones in the vendor kernel. > diff --git a/drivers/clk/spacemit/ccu-k3.c b/drivers/clk/spacemit/ccu-k3.c > index 92b930d5ff30..950bf531c734 100644 > --- a/drivers/clk/spacemit/ccu-k3.c > +++ b/drivers/clk/spacemit/ccu-k3.c > @@ -29,15 +29,91 @@ static const struct ccu_pll_rate_tbl pll2_rate_tbl[] = { > CCU_PLLA_RATE(3000000000UL, 0x0b3e2000, 0x00000000, 0xa0558c8c), > }; > > +/* Keep the firmware default as the first entry. */ > static const struct ccu_pll_rate_tbl pll3_rate_tbl[] = { > + CCU_PLLA_RATE(2000000000UL, 0x0b292aaa, 0x0000ab00, 0xa0558686), Is it really necessary to put this entry first? I guess it's the current default frequency, but we have seen it can evolve. From my tests, the driver seems to just keep the value configured by the firmware independently from the table order, so I am not sure it's necessary. > + CCU_PLLA_RATE(1050000000UL, 0x0b2b3000, 0x00000000, 0xa0458080), > + CCU_PLLA_RATE(1100000000UL, 0x0b2d3555, 0x00005500, 0xa0458181), > + CCU_PLLA_RATE(1150000000UL, 0x0b2f3aaa, 0x0000ab00, 0xa0458181), > + CCU_PLLA_RATE(1200000000UL, 0x0b320000, 0x00000000, 0xa0458181), > + CCU_PLLA_RATE(1250000000UL, 0x0b340555, 0x00005500, 0xa0458181), > + CCU_PLLA_RATE(1300000000UL, 0x0b360aaa, 0x0000ab00, 0xa0458282), > + CCU_PLLA_RATE(1350000000UL, 0x0b381000, 0x00000000, 0xa0458282), > + CCU_PLLA_RATE(1400000000UL, 0x0b3a1555, 0x00005500, 0xa0458282), > + CCU_PLLA_RATE(1450000000UL, 0x0b3c1aaa, 0x0000ab00, 0xa0458383), > + CCU_PLLA_RATE(1500000000UL, 0x0b3e2000, 0x00000000, 0xa0458383), > + CCU_PLLA_RATE(1550000000UL, 0x0b402555, 0x00005500, 0xa0458383), > + CCU_PLLA_RATE(1600000000UL, 0x0b422aaa, 0x0000ab00, 0xa0458484), > + CCU_PLLA_RATE(1650000000UL, 0x0b443000, 0x00000000, 0xa0458484), > + CCU_PLLA_RATE(1700000000UL, 0x0b463555, 0x00005500, 0xa0458484), > + CCU_PLLA_RATE(1750000000UL, 0x0b483aaa, 0x0000ab00, 0xa0458585), > + CCU_PLLA_RATE(1800000000UL, 0x0b4b0000, 0x00000000, 0xa0458585), > + CCU_PLLA_RATE(1850000000UL, 0x0b4d0555, 0x00005500, 0xa0458585), > + CCU_PLLA_RATE(1900000000UL, 0x0b4f0aaa, 0x0000ab00, 0xa0458686), > + CCU_PLLA_RATE(1950000000UL, 0x0b511000, 0x00000000, 0xa0458686), > + CCU_PLLA_RATE(2050000000UL, 0x0b2a2d55, 0x00005500, 0xa0558686), > + CCU_PLLA_RATE(2100000000UL, 0x0b2b3000, 0x00000000, 0xa0558787), > + CCU_PLLA_RATE(2150000000UL, 0x0b2c32aa, 0x0000ab00, 0xa0558787), > CCU_PLLA_RATE(2200000000UL, 0x0b2d3555, 0x00005500, 0xa0558787), > + CCU_PLLA_RATE(2250000000UL, 0x0b2e3800, 0x00000000, 0xa0558888), > + CCU_PLLA_RATE(2300000000UL, 0x0b2f3aaa, 0x0000ab00, 0xa0558888), > + CCU_PLLA_RATE(2350000000UL, 0x0b303d55, 0x00005500, 0xa0558888), > + CCU_PLLA_RATE(2400000000UL, 0x0b320000, 0x00000000, 0xa0558989), > }; > > +/* Keep the firmware default as the first entry. */ > static const struct ccu_pll_rate_tbl pll4_rate_tbl[] = { > + CCU_PLLA_RATE(2000000000UL, 0x0b292aaa, 0x0000ab00, 0xa0558686), > + CCU_PLLA_RATE(1050000000UL, 0x0b2b3000, 0x00000000, 0xa0458080), > + CCU_PLLA_RATE(1100000000UL, 0x0b2d3555, 0x00005500, 0xa0458181), > + CCU_PLLA_RATE(1150000000UL, 0x0b2f3aaa, 0x0000ab00, 0xa0458181), > + CCU_PLLA_RATE(1200000000UL, 0x0b320000, 0x00000000, 0xa0458181), > + CCU_PLLA_RATE(1250000000UL, 0x0b340555, 0x00005500, 0xa0458181), > + CCU_PLLA_RATE(1300000000UL, 0x0b360aaa, 0x0000ab00, 0xa0458282), > + CCU_PLLA_RATE(1350000000UL, 0x0b381000, 0x00000000, 0xa0458282), > + CCU_PLLA_RATE(1400000000UL, 0x0b3a1555, 0x00005500, 0xa0458282), > + CCU_PLLA_RATE(1450000000UL, 0x0b3c1aaa, 0x0000ab00, 0xa0458383), > + CCU_PLLA_RATE(1500000000UL, 0x0b3e2000, 0x00000000, 0xa0458383), > + CCU_PLLA_RATE(1550000000UL, 0x0b402555, 0x00005500, 0xa0458383), > + CCU_PLLA_RATE(1600000000UL, 0x0b422aaa, 0x0000ab00, 0xa0458484), > + CCU_PLLA_RATE(1650000000UL, 0x0b443000, 0x00000000, 0xa0458484), > + CCU_PLLA_RATE(1700000000UL, 0x0b463555, 0x00005500, 0xa0458484), > + CCU_PLLA_RATE(1750000000UL, 0x0b483aaa, 0x0000ab00, 0xa0458585), > + CCU_PLLA_RATE(1800000000UL, 0x0b4b0000, 0x00000000, 0xa0458585), > + CCU_PLLA_RATE(1850000000UL, 0x0b4d0555, 0x00005500, 0xa0458585), > + CCU_PLLA_RATE(1900000000UL, 0x0b4f0aaa, 0x0000ab00, 0xa0458686), > + CCU_PLLA_RATE(1950000000UL, 0x0b511000, 0x00000000, 0xa0458686), > + CCU_PLLA_RATE(2050000000UL, 0x0b2a2d55, 0x00005500, 0xa0558686), > + CCU_PLLA_RATE(2100000000UL, 0x0b2b3000, 0x00000000, 0xa0558787), > + CCU_PLLA_RATE(2150000000UL, 0x0b2c32aa, 0x0000ab00, 0xa0558787), > CCU_PLLA_RATE(2200000000UL, 0x0b2d3555, 0x00005500, 0xa0558787), > + CCU_PLLA_RATE(2250000000UL, 0x0b2e3800, 0x00000000, 0xa0558888), > + CCU_PLLA_RATE(2300000000UL, 0x0b2f3aaa, 0x0000ab00, 0xa0558888), > + CCU_PLLA_RATE(2350000000UL, 0x0b303d55, 0x00005500, 0xa0558888), > + CCU_PLLA_RATE(2400000000UL, 0x0b320000, 0x00000000, 0xa0558989), > }; > > +/* Keep the firmware default as the first entry. */ > static const struct ccu_pll_rate_tbl pll5_rate_tbl[] = { > + CCU_PLLA_RATE(1800000000UL, 0x0b4b0000, 0x00000000, 0xa0458585), Ditto > + CCU_PLLA_RATE(1050000000UL, 0x0b2b3000, 0x00000000, 0xa0458080), > + CCU_PLLA_RATE(1100000000UL, 0x0b2d3555, 0x00005500, 0xa0458181), > + CCU_PLLA_RATE(1150000000UL, 0x0b2f3aaa, 0x0000ab00, 0xa0458181), > + CCU_PLLA_RATE(1200000000UL, 0x0b320000, 0x00000000, 0xa0458181), > + CCU_PLLA_RATE(1250000000UL, 0x0b340555, 0x00005500, 0xa0458181), > + CCU_PLLA_RATE(1300000000UL, 0x0b360aaa, 0x0000ab00, 0xa0458282), > + CCU_PLLA_RATE(1350000000UL, 0x0b381000, 0x00000000, 0xa0458282), > + CCU_PLLA_RATE(1400000000UL, 0x0b3a1555, 0x00005500, 0xa0458282), > + CCU_PLLA_RATE(1450000000UL, 0x0b3c1aaa, 0x0000ab00, 0xa0458383), > + CCU_PLLA_RATE(1500000000UL, 0x0b3e2000, 0x00000000, 0xa0458383), > + CCU_PLLA_RATE(1550000000UL, 0x0b402555, 0x00005500, 0xa0458383), > + CCU_PLLA_RATE(1600000000UL, 0x0b422aaa, 0x0000ab00, 0xa0458484), > + CCU_PLLA_RATE(1650000000UL, 0x0b443000, 0x00000000, 0xa0458484), > + CCU_PLLA_RATE(1700000000UL, 0x0b463555, 0x00005500, 0xa0458484), > + CCU_PLLA_RATE(1750000000UL, 0x0b483aaa, 0x0000ab00, 0xa0458585), > + CCU_PLLA_RATE(1850000000UL, 0x0b4d0555, 0x00005500, 0xa0458585), > + CCU_PLLA_RATE(1900000000UL, 0x0b4f0aaa, 0x0000ab00, 0xa0458686), > + CCU_PLLA_RATE(1950000000UL, 0x0b511000, 0x00000000, 0xa0458686), > CCU_PLLA_RATE(2000000000UL, 0x0b292aaa, 0x0000ab00, 0xa0558686), > }; > > @@ -49,7 +125,27 @@ static const struct ccu_pll_rate_tbl pll7_rate_tbl[] = { > CCU_PLLA_RATE(2800000000UL, 0x0b3a1555, 0x00005500, 0xa0558b8b), > }; > > +/* Keep the firmware default as the first entry. */ > static const struct ccu_pll_rate_tbl pll8_rate_tbl[] = { > + CCU_PLLA_RATE(1800000000UL, 0x0b4b0000, 0x00000000, 0xa0458585), > + CCU_PLLA_RATE(1050000000UL, 0x0b2b3000, 0x00000000, 0xa0458080), > + CCU_PLLA_RATE(1100000000UL, 0x0b2d3555, 0x00005500, 0xa0458181), > + CCU_PLLA_RATE(1150000000UL, 0x0b2f3aaa, 0x0000ab00, 0xa0458181), > + CCU_PLLA_RATE(1200000000UL, 0x0b320000, 0x00000000, 0xa0458181), > + CCU_PLLA_RATE(1250000000UL, 0x0b340555, 0x00005500, 0xa0458181), > + CCU_PLLA_RATE(1300000000UL, 0x0b360aaa, 0x0000ab00, 0xa0458282), > + CCU_PLLA_RATE(1350000000UL, 0x0b381000, 0x00000000, 0xa0458282), > + CCU_PLLA_RATE(1400000000UL, 0x0b3a1555, 0x00005500, 0xa0458282), > + CCU_PLLA_RATE(1450000000UL, 0x0b3c1aaa, 0x0000ab00, 0xa0458383), > + CCU_PLLA_RATE(1500000000UL, 0x0b3e2000, 0x00000000, 0xa0458383), > + CCU_PLLA_RATE(1550000000UL, 0x0b402555, 0x00005500, 0xa0458383), > + CCU_PLLA_RATE(1600000000UL, 0x0b422aaa, 0x0000ab00, 0xa0458484), > + CCU_PLLA_RATE(1650000000UL, 0x0b443000, 0x00000000, 0xa0458484), > + CCU_PLLA_RATE(1700000000UL, 0x0b463555, 0x00005500, 0xa0458484), > + CCU_PLLA_RATE(1750000000UL, 0x0b483aaa, 0x0000ab00, 0xa0458585), > + CCU_PLLA_RATE(1850000000UL, 0x0b4d0555, 0x00005500, 0xa0458585), > + CCU_PLLA_RATE(1900000000UL, 0x0b4f0aaa, 0x0000ab00, 0xa0458686), > + CCU_PLLA_RATE(1950000000UL, 0x0b511000, 0x00000000, 0xa0458686), > CCU_PLLA_RATE(2000000000UL, 0x0b292aaa, 0x0000ab00, 0xa0558686), > }; I have tested the patch, and I confirm it fixes the boot hang with newer firmware, and will fix it if the default firmware values change again. My comments are just minor ones, so: Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: Aurelien Jarno <aurelien@aurel32.net> Regards Aurelien -- Aurelien Jarno GPG: 4096R/1DDD8C9B aurelien@aurel32.net http://aurel32.net ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v4] clk: spacemit: k3: add CPU PLL rate tables 2026-09-03 17:27 ` Aurelien Jarno @ 2026-09-04 3:24 ` Troy Mitchell 2026-09-05 8:39 ` Aurelien Jarno 0 siblings, 1 reply; 5+ messages in thread From: Troy Mitchell @ 2026-09-04 3:24 UTC (permalink / raw) To: Aurelien Jarno, Troy Mitchell Cc: Michael Turquette, Inochi Amaoto, Alex Elder, Haylen Chu, stable, Stephen Boyd, Brian Masney, Jerome Brunet, Yixun Lan, Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti, linux-clk, linux-riscv, spacemit, linux-kernel [-- Attachment #1: Type: text/plain, Size: 4294 bytes --] Hi Aurelien, On Fri Sep 4, 2026 at 1:27 AM +08, Aurelien Jarno wrote: > Hi Troy, > > On 2026-09-03 11:06, Troy Mitchell wrote: >> The K3 CPU PLL rate tables currently describe only one rate per PLL, >> although the hardware supports a wider range. >> >> PLL3 and PLL4 support rates from 1.05 to 2.4 GHz, while PLL5 and PLL8 >> support rates from 1.05 to 2 GHz. Populate the tables with every >> supported rate in 50 MHz steps. >> >> Cc: stable@vger.kernel.org # 7.0+ >> Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com> >> --- >> The corresponding U-Boot changes are available at: >> >> - Add the CPU PLL rate tables: >> https://github.com/spacemit-com/uboot-2022.10/commit/787b5cf44c8dbc99db886d5522c0c9cd5a96ffd6 >> - Correct the 1.10 GHz and 2.15 GHz table entries: >> https://github.com/spacemit-com/uboot-2022.10/commit/16a775c20e9efb54ca55352215e76eb3f12e6cf0 >> --- >> Changes in v4: >> - Expand the update to every supported PLL3, PLL4, PLL5 and PLL8 rate. >> - Drop Aurelien Jarno's Reviewed-by and Tested-by trailers because the >> patch scope has expanded. >> - Add U-Boot references for the complete tables and corrected entries. >> - Link to v3: https://patch.msgid.link/20260831-k3-pll5-pll8-1800mhz-v3-1-530ed0978615@linux.spacemit.com >> >> Changes in v3: >> - Mark the change for stable kernels starting with v7.0. >> - Add Aurelien Jarno's Reviewed-by and Tested-by trailers. >> - Rebase onto v7.3-rc1. >> - Link to v2: https://patch.msgid.link/20260810-k3-pll5-pll8-1800mhz-v2-1-aabff510a797@linux.spacemit.com >> >> Changes in v2: >> - Drop "clk: spacemit: re-enable PLLs after init"; the PLL init issue >> will be handled in a separate series. >> - Send the K3 PLL5 and PLL8 1.8 GHz rate-table update as a standalone >> patch. >> - Clarify that 1.8 GHz is nominal and 2 GHz is an overclocking rate. >> - Link to v1: https://patch.msgid.link/20260804-k3-pll5-pll8-1800mhz-v1-0-a3a75866ce32@linux.spacemit.com >> >> To: Stephen Boyd <sboyd@kernel.org> >> To: Brian Masney <bmasney+clk@redhat.com> >> To: Jerome Brunet <jbrunet+clk@baylibre.com> >> To: Yixun Lan <dlan@kernel.org> >> To: Paul Walmsley <pjw@kernel.org> >> To: Palmer Dabbelt <palmer@dabbelt.com> >> To: Albert Ou <aou@eecs.berkeley.edu> >> To: Alexandre Ghiti <alex@ghiti.fr> >> Cc: linux-clk@vger.kernel.org >> Cc: linux-riscv@lists.infradead.org >> Cc: spacemit@lists.linux.dev >> Cc: linux-kernel@vger.kernel.org >> --- >> drivers/clk/spacemit/ccu-k3.c | 96 +++++++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 96 insertions(+) > > Thanks for the patch, it makes sense to add all the values, to support > future firmware changes. The values match the ones in the vendor kernel. I forgot that you had a similar patch as well.. > >> diff --git a/drivers/clk/spacemit/ccu-k3.c b/drivers/clk/spacemit/ccu-k3.c >> index 92b930d5ff30..950bf531c734 100644 >> --- a/drivers/clk/spacemit/ccu-k3.c >> +++ b/drivers/clk/spacemit/ccu-k3.c >> @@ -29,15 +29,91 @@ static const struct ccu_pll_rate_tbl pll2_rate_tbl[] = { >> CCU_PLLA_RATE(3000000000UL, 0x0b3e2000, 0x00000000, 0xa0558c8c), >> }; >> >> +/* Keep the firmware default as the first entry. */ >> static const struct ccu_pll_rate_tbl pll3_rate_tbl[] = { >> + CCU_PLLA_RATE(2000000000UL, 0x0b292aaa, 0x0000ab00, 0xa0558686), > > Is it really necessary to put this entry first? I guess it's the current > default frequency, but we have seen it can evolve. From my tests, the > driver seems to just keep the value configured by the firmware > independently from the table order, so I am not sure it's necessary. I think keeping it first is necessary. If the current register settings do not match any entry in the table, ccu_plla_init() falls back to the first entry: ccu_plla_update_param(pll, &pll->config.rate_tbl[0]); [...] >> }; > > I have tested the patch, and I confirm it fixes the boot hang with newer > firmware, and will fix it if the default firmware values change again. > My comments are just minor ones, so: > > Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> > Tested-by: Aurelien Jarno <aurelien@aurel32.net> Thanks for the tags. > > Regards > Aurelien -- Troy Mitchell [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 248 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v4] clk: spacemit: k3: add CPU PLL rate tables 2026-09-04 3:24 ` Troy Mitchell @ 2026-09-05 8:39 ` Aurelien Jarno 0 siblings, 0 replies; 5+ messages in thread From: Aurelien Jarno @ 2026-09-05 8:39 UTC (permalink / raw) To: Troy Mitchell Cc: Michael Turquette, Inochi Amaoto, Alex Elder, Haylen Chu, stable, Stephen Boyd, Brian Masney, Jerome Brunet, Yixun Lan, Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti, linux-clk, linux-riscv, spacemit, linux-kernel [-- Attachment #1: Type: text/plain, Size: 4629 bytes --] Hi Troy, On 2026-09-04 11:24, Troy Mitchell wrote: > Hi Aurelien, > > On Fri Sep 4, 2026 at 1:27 AM +08, Aurelien Jarno wrote: > > Hi Troy, > > > > On 2026-09-03 11:06, Troy Mitchell wrote: > >> The K3 CPU PLL rate tables currently describe only one rate per PLL, > >> although the hardware supports a wider range. > >> > >> PLL3 and PLL4 support rates from 1.05 to 2.4 GHz, while PLL5 and PLL8 > >> support rates from 1.05 to 2 GHz. Populate the tables with every > >> supported rate in 50 MHz steps. > >> > >> Cc: stable@vger.kernel.org # 7.0+ > >> Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com> > >> --- > >> The corresponding U-Boot changes are available at: > >> > >> - Add the CPU PLL rate tables: > >> https://github.com/spacemit-com/uboot-2022.10/commit/787b5cf44c8dbc99db886d5522c0c9cd5a96ffd6 > >> - Correct the 1.10 GHz and 2.15 GHz table entries: > >> https://github.com/spacemit-com/uboot-2022.10/commit/16a775c20e9efb54ca55352215e76eb3f12e6cf0 > >> --- > >> Changes in v4: > >> - Expand the update to every supported PLL3, PLL4, PLL5 and PLL8 rate. > >> - Drop Aurelien Jarno's Reviewed-by and Tested-by trailers because the > >> patch scope has expanded. > >> - Add U-Boot references for the complete tables and corrected entries. > >> - Link to v3: https://patch.msgid.link/20260831-k3-pll5-pll8-1800mhz-v3-1-530ed0978615@linux.spacemit.com > >> > >> Changes in v3: > >> - Mark the change for stable kernels starting with v7.0. > >> - Add Aurelien Jarno's Reviewed-by and Tested-by trailers. > >> - Rebase onto v7.3-rc1. > >> - Link to v2: https://patch.msgid.link/20260810-k3-pll5-pll8-1800mhz-v2-1-aabff510a797@linux.spacemit.com > >> > >> Changes in v2: > >> - Drop "clk: spacemit: re-enable PLLs after init"; the PLL init issue > >> will be handled in a separate series. > >> - Send the K3 PLL5 and PLL8 1.8 GHz rate-table update as a standalone > >> patch. > >> - Clarify that 1.8 GHz is nominal and 2 GHz is an overclocking rate. > >> - Link to v1: https://patch.msgid.link/20260804-k3-pll5-pll8-1800mhz-v1-0-a3a75866ce32@linux.spacemit.com > >> > >> To: Stephen Boyd <sboyd@kernel.org> > >> To: Brian Masney <bmasney+clk@redhat.com> > >> To: Jerome Brunet <jbrunet+clk@baylibre.com> > >> To: Yixun Lan <dlan@kernel.org> > >> To: Paul Walmsley <pjw@kernel.org> > >> To: Palmer Dabbelt <palmer@dabbelt.com> > >> To: Albert Ou <aou@eecs.berkeley.edu> > >> To: Alexandre Ghiti <alex@ghiti.fr> > >> Cc: linux-clk@vger.kernel.org > >> Cc: linux-riscv@lists.infradead.org > >> Cc: spacemit@lists.linux.dev > >> Cc: linux-kernel@vger.kernel.org > >> --- > >> drivers/clk/spacemit/ccu-k3.c | 96 +++++++++++++++++++++++++++++++++++++++++++ > >> 1 file changed, 96 insertions(+) > > > > Thanks for the patch, it makes sense to add all the values, to support > > future firmware changes. The values match the ones in the vendor kernel. > I forgot that you had a similar patch as well.. > > > > >> diff --git a/drivers/clk/spacemit/ccu-k3.c b/drivers/clk/spacemit/ccu-k3.c > >> index 92b930d5ff30..950bf531c734 100644 > >> --- a/drivers/clk/spacemit/ccu-k3.c > >> +++ b/drivers/clk/spacemit/ccu-k3.c > >> @@ -29,15 +29,91 @@ static const struct ccu_pll_rate_tbl pll2_rate_tbl[] = { > >> CCU_PLLA_RATE(3000000000UL, 0x0b3e2000, 0x00000000, 0xa0558c8c), > >> }; > >> > >> +/* Keep the firmware default as the first entry. */ > >> static const struct ccu_pll_rate_tbl pll3_rate_tbl[] = { > >> + CCU_PLLA_RATE(2000000000UL, 0x0b292aaa, 0x0000ab00, 0xa0558686), > > > > Is it really necessary to put this entry first? I guess it's the current > > default frequency, but we have seen it can evolve. From my tests, the > > driver seems to just keep the value configured by the firmware > > independently from the table order, so I am not sure it's necessary. > I think keeping it first is necessary. If the current register settings do > not match any entry in the table, ccu_plla_init() falls back to the first > entry: > > > ccu_plla_update_param(pll, &pll->config.rate_tbl[0]); > > [...] For the A100 cores, that indeed makes sense. For the X100 cores this line is never reached, as the line above just stops the PLL, basically stopping the cores: if (ccu_plla_lookup_matched_entry(pll)) return 0; ccu_plla_disable(hw); ccu_plla_update_param(pll, &pll->config.rate_tbl[0]); Regards Aurelien -- Aurelien Jarno GPG: 4096R/1DDD8C9B aurelien@aurel32.net http://aurel32.net [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v4] clk: spacemit: k3: add CPU PLL rate tables 2026-09-03 3:06 [PATCH v4] clk: spacemit: k3: add CPU PLL rate tables Troy Mitchell 2026-09-03 17:27 ` Aurelien Jarno @ 2026-09-05 16:41 ` Anirudh Srinivasan 1 sibling, 0 replies; 5+ messages in thread From: Anirudh Srinivasan @ 2026-09-05 16:41 UTC (permalink / raw) To: Troy Mitchell, Yixun Lan Cc: Michael Turquette, Inochi Amaoto, Alex Elder, Haylen Chu, Aurelien Jarno, stable, Stephen Boyd, Brian Masney, Jerome Brunet, Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti, linux-clk, linux-riscv, spacemit, linux-kernel Hi Troy, On Thu, Sep 03, 2026 at 11:06:24AM +0800, Troy Mitchell wrote: > The K3 CPU PLL rate tables currently describe only one rate per PLL, > although the hardware supports a wider range. > > PLL3 and PLL4 support rates from 1.05 to 2.4 GHz, while PLL5 and PLL8 > support rates from 1.05 to 2 GHz. Populate the tables with every > supported rate in 50 MHz steps. > > Cc: stable@vger.kernel.org # 7.0+ > Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com> > --- > The corresponding U-Boot changes are available at: > > - Add the CPU PLL rate tables: > https://github.com/spacemit-com/uboot-2022.10/commit/787b5cf44c8dbc99db886d5522c0c9cd5a96ffd6 > - Correct the 1.10 GHz and 2.15 GHz table entries: > https://github.com/spacemit-com/uboot-2022.10/commit/16a775c20e9efb54ca55352215e76eb3f12e6cf0 > --- > Changes in v4: > - Expand the update to every supported PLL3, PLL4, PLL5 and PLL8 rate. > - Drop Aurelien Jarno's Reviewed-by and Tested-by trailers because the > patch scope has expanded. > - Add U-Boot references for the complete tables and corrected entries. > - Link to v3: https://patch.msgid.link/20260831-k3-pll5-pll8-1800mhz-v3-1-530ed0978615@linux.spacemit.com > > Changes in v3: > - Mark the change for stable kernels starting with v7.0. > - Add Aurelien Jarno's Reviewed-by and Tested-by trailers. > - Rebase onto v7.3-rc1. > - Link to v2: https://patch.msgid.link/20260810-k3-pll5-pll8-1800mhz-v2-1-aabff510a797@linux.spacemit.com > > Changes in v2: > - Drop "clk: spacemit: re-enable PLLs after init"; the PLL init issue > will be handled in a separate series. > - Send the K3 PLL5 and PLL8 1.8 GHz rate-table update as a standalone > patch. > - Clarify that 1.8 GHz is nominal and 2 GHz is an overclocking rate. > - Link to v1: https://patch.msgid.link/20260804-k3-pll5-pll8-1800mhz-v1-0-a3a75866ce32@linux.spacemit.com > > To: Stephen Boyd <sboyd@kernel.org> > To: Brian Masney <bmasney+clk@redhat.com> > To: Jerome Brunet <jbrunet+clk@baylibre.com> > To: Yixun Lan <dlan@kernel.org> > To: Paul Walmsley <pjw@kernel.org> > To: Palmer Dabbelt <palmer@dabbelt.com> > To: Albert Ou <aou@eecs.berkeley.edu> > To: Alexandre Ghiti <alex@ghiti.fr> > Cc: linux-clk@vger.kernel.org > Cc: linux-riscv@lists.infradead.org > Cc: spacemit@lists.linux.dev > Cc: linux-kernel@vger.kernel.org > --- > drivers/clk/spacemit/ccu-k3.c | 96 +++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 96 insertions(+) > On a recently new K3 board (shipped with OpenSBI/U-boot dated end of July), I was seeing upstream kernel boot hang after IMSIC initialization. Some logging indicated that it was hanging around the clock controller initializations (k3_ccu_driver_init). On a board running older U-boot/OpenSBI from May, I originally didn't observe this hang, but doing multiple repeated boots showed a rare instance of this hang happening. Some changes were added to OpenSBI in this period (end of June) that trap clock controller registers to M Mode and handle reads/writes there. Yixun pointed me to this patch, and it seems to fix the boot hang on the board runner newer OpenSBI. I think this avoids some kind of a race condition with disabling/re-enabling a PLL that the clock driver does. I'm finding it a bit hard to explain/understand what exactly it the reason though. Yixun, could this patch get added in soon? Tested-by: Anirudh Srinivasan <asrinivasan@oss.tenstorrent.com> Regards Anirudh Srinivasan ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2026-09-05 16:42 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2026-09-03 3:06 [PATCH v4] clk: spacemit: k3: add CPU PLL rate tables Troy Mitchell 2026-09-03 17:27 ` Aurelien Jarno 2026-09-04 3:24 ` Troy Mitchell 2026-09-05 8:39 ` Aurelien Jarno 2026-09-05 16:41 ` Anirudh Srinivasan
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox