Patch "mmc: core: Enable tuning according to the actual timing" has been added to the 4.4-stable tree

Patch "mmc: core: Enable tuning according to the actual timing" has been added to the 4.4-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    mmc: core: Enable tuning according to the actual timing

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     mmc-core-enable-tuning-according-to-the-actual-timing.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From e10c321977091f163eceedec0650e0ef4b3cf4bb Mon Sep 17 00:00:00 2001
From: Carlo Caione <carlo@endlessm.com>
Date: Wed, 13 Jan 2016 09:36:55 +0100
Subject: mmc: core: Enable tuning according to the actual timing

From: Carlo Caione <carlo@endlessm.com>

commit e10c321977091f163eceedec0650e0ef4b3cf4bb upstream.

While in sdhci_execute_tuning() the choice whether or not to enable the
tuning is done on the actual timing, in the mmc_sdio_init_uhs_card() the
check is done on the capability of the card.

This difference is causing some issues with some SDIO cards in DDR50
mode where the CDM19 is wrongly issued.

With this patch we modify the check in both
mmc_(sd|sdio)_init_uhs_card() functions to take the proper decision
only according to the actual timing specification.

Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/core/sd.c   |    8 ++++----
 drivers/mmc/core/sdio.c |    4 ++--
 2 files changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -626,9 +626,9 @@ static int mmc_sd_init_uhs_card(struct m
 	 * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104.
 	 */
 	if (!mmc_host_is_spi(card->host) &&
-		(card->sd_bus_speed == UHS_SDR50_BUS_SPEED ||
-		 card->sd_bus_speed == UHS_DDR50_BUS_SPEED ||
-		 card->sd_bus_speed == UHS_SDR104_BUS_SPEED)) {
+		(card->host->ios.timing == MMC_TIMING_UHS_SDR50 ||
+		 card->host->ios.timing == MMC_TIMING_UHS_DDR50 ||
+		 card->host->ios.timing == MMC_TIMING_UHS_SDR104)) {
 		err = mmc_execute_tuning(card);
 
 		/*
@@ -638,7 +638,7 @@ static int mmc_sd_init_uhs_card(struct m
 		 * difference between v3.00 and 3.01 spec means that CMD19
 		 * tuning is also available for DDR50 mode.
 		 */
-		if (err && card->sd_bus_speed == UHS_DDR50_BUS_SPEED) {
+		if (err && card->host->ios.timing == MMC_TIMING_UHS_DDR50) {
 			pr_warn("%s: ddr50 tuning failed\n",
 				mmc_hostname(card->host));
 			err = 0;
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -535,8 +535,8 @@ static int mmc_sdio_init_uhs_card(struct
 	 * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104.
 	 */
 	if (!mmc_host_is_spi(card->host) &&
-	    ((card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR50) ||
-	     (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104)))
+	    ((card->host->ios.timing == MMC_TIMING_UHS_SDR50) ||
+	      (card->host->ios.timing == MMC_TIMING_UHS_SDR104)))
 		err = mmc_execute_tuning(card);
 out:
 	return err;


Patches currently in stable-queue which might be from carlo@endlessm.com are

queue-4.4/mmc-core-enable-tuning-according-to-the-actual-timing.patch