* [PATCH v2 03/12] arm: dts: mt7623: fix invalid memory node being generated
[not found] <cover.1523434757.git.sean.wang@mediatek.com>
@ 2018-04-11 8:53 ` sean.wang
2018-05-11 15:03 ` Matthias Brugger
0 siblings, 1 reply; 3+ messages in thread
From: sean.wang @ 2018-04-11 8:53 UTC (permalink / raw)
To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel, Sean Wang, stable
From: Sean Wang <sean.wang@mediatek.com>
Below two wrong nodes in existing DTS files would cause a fail boot since
in fact the address 0 is not the correct place the memory device locates
at.
memory {
device_type = "memory";
reg = <0x0 0x0 0x0 0x0>;
};
memory@80000000 {
reg = <0x0 0x80000000 0x0 0x40000000>;
};
In order to avoid having a memory node starting at address 0, we can't
include file skeleton64.dtsi and instead need to explicitly manually
define a few of properties the DTS relies on such as #address-cells
and #size-cells in root node and device_type in the node memory@80000000.
Cc: stable@vger.kernel.org
Fixes: 31ac0d69a1d4 ("ARM: dts: mediatek: add MT7623 basic support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Rob Herring <robh+dt@kernel.org>
---
arch/arm/boot/dts/mt7623.dtsi | 3 ++-
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 1 +
arch/arm/boot/dts/mt7623n-rfb.dtsi | 1 +
3 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index fec4715..406a9f3 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -15,11 +15,12 @@
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/reset/mt2701-resets.h>
#include <dt-bindings/thermal/thermal.h>
-#include "skeleton64.dtsi"
/ {
compatible = "mediatek,mt7623";
interrupt-parent = <&sysirq>;
+ #address-cells = <2>;
+ #size-cells = <2>;
cpu_opp_table: opp-table {
compatible = "operating-points-v2";
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index bbf56f8..5938e4c 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -109,6 +109,7 @@
};
memory@80000000 {
+ device_type = "memory";
reg = <0 0x80000000 0 0x40000000>;
};
};
diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
index a199ae7..343e8ef 100644
--- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -40,6 +40,7 @@
};
memory@80000000 {
+ device_type = "memory";
reg = <0 0x80000000 0 0x40000000>;
};
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v2 03/12] arm: dts: mt7623: fix invalid memory node being generated
2018-04-11 8:53 ` [PATCH v2 03/12] arm: dts: mt7623: fix invalid memory node being generated sean.wang
@ 2018-05-11 15:03 ` Matthias Brugger
2018-05-12 5:28 ` Sean Wang
0 siblings, 1 reply; 3+ messages in thread
From: Matthias Brugger @ 2018-05-11 15:03 UTC (permalink / raw)
To: sean.wang, robh+dt, mark.rutland, devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-kernel, stable
On 04/11/2018 10:53 AM, sean.wang@mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
>
> Below two wrong nodes in existing DTS files would cause a fail boot since
> in fact the address 0 is not the correct place the memory device locates
> at.
>
> memory {
> device_type = "memory";
> reg = <0x0 0x0 0x0 0x0>;
> };
>
> memory@80000000 {
> reg = <0x0 0x80000000 0x0 0x40000000>;
> };
>
> In order to avoid having a memory node starting at address 0, we can't
> include file skeleton64.dtsi and instead need to explicitly manually
> define a few of properties the DTS relies on such as #address-cells
> and #size-cells in root node and device_type in the node memory@80000000.
>
> Cc: stable@vger.kernel.org
> Fixes: 31ac0d69a1d4 ("ARM: dts: mediatek: add MT7623 basic support")
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> ---
> arch/arm/boot/dts/mt7623.dtsi | 3 ++-
> arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 1 +
> arch/arm/boot/dts/mt7623n-rfb.dtsi | 1 +
> 3 files changed, 4 insertions(+), 1 deletion(-)
>
merged. We would need this at least for mt2701 as well, correct?
Would you mind to provide a patch.
Regards,
Matthias
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index fec4715..406a9f3 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -15,11 +15,12 @@
> #include <dt-bindings/phy/phy.h>
> #include <dt-bindings/reset/mt2701-resets.h>
> #include <dt-bindings/thermal/thermal.h>
> -#include "skeleton64.dtsi"
>
> / {
> compatible = "mediatek,mt7623";
> interrupt-parent = <&sysirq>;
> + #address-cells = <2>;
> + #size-cells = <2>;
>
> cpu_opp_table: opp-table {
> compatible = "operating-points-v2";
> diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> index bbf56f8..5938e4c 100644
> --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> @@ -109,6 +109,7 @@
> };
>
> memory@80000000 {
> + device_type = "memory";
> reg = <0 0x80000000 0 0x40000000>;
> };
> };
> diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
> index a199ae7..343e8ef 100644
> --- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
> +++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
> @@ -40,6 +40,7 @@
> };
>
> memory@80000000 {
> + device_type = "memory";
> reg = <0 0x80000000 0 0x40000000>;
> };
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2 03/12] arm: dts: mt7623: fix invalid memory node being generated
2018-05-11 15:03 ` Matthias Brugger
@ 2018-05-12 5:28 ` Sean Wang
0 siblings, 0 replies; 3+ messages in thread
From: Sean Wang @ 2018-05-12 5:28 UTC (permalink / raw)
To: Matthias Brugger
Cc: robh+dt, mark.rutland, devicetree, linux-mediatek,
linux-arm-kernel, linux-kernel, stable
On Fri, 2018-05-11 at 17:03 +0200, Matthias Brugger wrote:
>
> On 04/11/2018 10:53 AM, sean.wang@mediatek.com wrote:
> > From: Sean Wang <sean.wang@mediatek.com>
> >
> > Below two wrong nodes in existing DTS files would cause a fail boot since
> > in fact the address 0 is not the correct place the memory device locates
> > at.
> >
> > memory {
> > device_type = "memory";
> > reg = <0x0 0x0 0x0 0x0>;
> > };
> >
> > memory@80000000 {
> > reg = <0x0 0x80000000 0x0 0x40000000>;
> > };
> >
> > In order to avoid having a memory node starting at address 0, we can't
> > include file skeleton64.dtsi and instead need to explicitly manually
> > define a few of properties the DTS relies on such as #address-cells
> > and #size-cells in root node and device_type in the node memory@80000000.
> >
> > Cc: stable@vger.kernel.org
> > Fixes: 31ac0d69a1d4 ("ARM: dts: mediatek: add MT7623 basic support")
> > Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> > Cc: Rob Herring <robh+dt@kernel.org>
> > ---
> > arch/arm/boot/dts/mt7623.dtsi | 3 ++-
> > arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 1 +
> > arch/arm/boot/dts/mt7623n-rfb.dtsi | 1 +
> > 3 files changed, 4 insertions(+), 1 deletion(-)
> >
>
> merged. We would need this at least for mt2701 as well, correct?
> Would you mind to provide a patch.
>
> Regards,
> Matthias
>
Thanks! I totally think the same problem could happen on mt2701, so I'm
happy to come up with a patch for that.
Sean
> > diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> > index fec4715..406a9f3 100644
> > --- a/arch/arm/boot/dts/mt7623.dtsi
> > +++ b/arch/arm/boot/dts/mt7623.dtsi
> > @@ -15,11 +15,12 @@
> > #include <dt-bindings/phy/phy.h>
> > #include <dt-bindings/reset/mt2701-resets.h>
> > #include <dt-bindings/thermal/thermal.h>
> > -#include "skeleton64.dtsi"
> >
> > / {
> > compatible = "mediatek,mt7623";
> > interrupt-parent = <&sysirq>;
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> >
> > cpu_opp_table: opp-table {
> > compatible = "operating-points-v2";
> > diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> > index bbf56f8..5938e4c 100644
> > --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> > +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> > @@ -109,6 +109,7 @@
> > };
> >
> > memory@80000000 {
> > + device_type = "memory";
> > reg = <0 0x80000000 0 0x40000000>;
> > };
> > };
> > diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
> > index a199ae7..343e8ef 100644
> > --- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
> > +++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
> > @@ -40,6 +40,7 @@
> > };
> >
> > memory@80000000 {
> > + device_type = "memory";
> > reg = <0 0x80000000 0 0x40000000>;
> > };
> >
> >
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-05-12 5:28 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <cover.1523434757.git.sean.wang@mediatek.com>
2018-04-11 8:53 ` [PATCH v2 03/12] arm: dts: mt7623: fix invalid memory node being generated sean.wang
2018-05-11 15:03 ` Matthias Brugger
2018-05-12 5:28 ` Sean Wang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox