* [PATCH v3 1/4] mm/balloon_compaction: redesign ballooned pages management [not found] <20140927183403.13738.22121.stgit@zurg> @ 2014-09-27 19:15 ` Konstantin Khlebnikov 2014-10-28 18:47 ` Matt Mullins 0 siblings, 1 reply; 6+ messages in thread From: Konstantin Khlebnikov @ 2014-09-27 19:15 UTC (permalink / raw) To: linux-mm, Andrew Morton, linux-kernel Cc: Konstantin Khlebnikov, Andrey Ryabinin, Rafael Aquini, Stable, Sasha Levin From: Konstantin Khlebnikov <k.khlebnikov@samsung.com> Sasha Levin reported KASAN splash inside isolate_migratepages_range(). Problem is in the function __is_movable_balloon_page() which tests AS_BALLOON_MAP in page->mapping->flags. This function has no protection against anonymous pages. As result it tried to check address space flags inside struct anon_vma. Further investigation shows more problems in current implementation: * Special branch in __unmap_and_move() never works: balloon_page_movable() checks page flags and page_count. In __unmap_and_move() page is locked, reference counter is elevated, thus balloon_page_movable() always fails. As a result execution goes to the normal migration path. virtballoon_migratepage() returns MIGRATEPAGE_BALLOON_SUCCESS instead of MIGRATEPAGE_SUCCESS, move_to_new_page() thinks this is an error code and assigns newpage->mapping to NULL. Newly migrated page lose connectivity with balloon an all ability for further migration. * lru_lock erroneously required in isolate_migratepages_range() for isolation ballooned page. This function releases lru_lock periodically, this makes migration mostly impossible for some pages. * balloon_page_dequeue have a tight race with balloon_page_isolate: balloon_page_isolate could be executed in parallel with dequeue between picking page from list and locking page_lock. Race is rare because they use trylock_page() for locking. This patch fixes all of them. Instead of fake mapping with special flag this patch uses special state of page->_mapcount: PAGE_BALLOON_MAPCOUNT_VALUE = -256. Buddy allocator uses PAGE_BUDDY_MAPCOUNT_VALUE = -128 for similar purpose. Storing mark directly in struct page makes everything safer and easier. PagePrivate is used to mark pages present in page list (i.e. not isolated, like PageLRU for normal pages). It replaces special rules for reference counter and makes balloon migration similar to migration of normal pages. This flag is protected by page_lock together with link to the balloon device. Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Link: http://lkml.kernel.org/p/53E6CEAA.9020105@oracle.com Cc: Rafael Aquini <aquini@redhat.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Stable <stable@vger.kernel.org> (v3.8+) Cc: Andrew Morton <akpm@linux-foundation.org> --- drivers/virtio/virtio_balloon.c | 15 +++--- include/linux/balloon_compaction.h | 97 +++++++++--------------------------- include/linux/migrate.h | 11 ---- include/linux/mm.h | 19 +++++++ mm/balloon_compaction.c | 26 ++++------ mm/compaction.c | 2 - mm/migrate.c | 16 +----- 7 files changed, 68 insertions(+), 118 deletions(-) diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c index 25ebe8e..c3eb93fc 100644 --- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -163,8 +163,8 @@ static void release_pages_by_pfn(const u32 pfns[], unsigned int num) /* Find pfns pointing at start of each page, get pages and free them. */ for (i = 0; i < num; i += VIRTIO_BALLOON_PAGES_PER_PAGE) { struct page *page = balloon_pfn_to_page(pfns[i]); - balloon_page_free(page); adjust_managed_page_count(page, 1); + put_page(page); /* balloon reference */ } } @@ -395,6 +395,8 @@ static int virtballoon_migratepage(struct address_space *mapping, if (!mutex_trylock(&vb->balloon_lock)) return -EAGAIN; + get_page(newpage); /* balloon reference */ + /* balloon's page migration 1st step -- inflate "newpage" */ spin_lock_irqsave(&vb_dev_info->pages_lock, flags); balloon_page_insert(newpage, mapping, &vb_dev_info->pages); @@ -404,12 +406,7 @@ static int virtballoon_migratepage(struct address_space *mapping, set_page_pfns(vb->pfns, newpage); tell_host(vb, vb->inflate_vq); - /* - * balloon's page migration 2nd step -- deflate "page" - * - * It's safe to delete page->lru here because this page is at - * an isolated migration list, and this step is expected to happen here - */ + /* balloon's page migration 2nd step -- deflate "page" */ balloon_page_delete(page); vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE; set_page_pfns(vb->pfns, page); @@ -417,7 +414,9 @@ static int virtballoon_migratepage(struct address_space *mapping, mutex_unlock(&vb->balloon_lock); - return MIGRATEPAGE_BALLOON_SUCCESS; + put_page(page); /* balloon reference */ + + return MIGRATEPAGE_SUCCESS; } /* define the balloon_mapping->a_ops callback to allow balloon page migration */ diff --git a/include/linux/balloon_compaction.h b/include/linux/balloon_compaction.h index 089743a..38aa07d 100644 --- a/include/linux/balloon_compaction.h +++ b/include/linux/balloon_compaction.h @@ -27,10 +27,13 @@ * counter raised only while it is under our special handling; * * iii. after the lockless scan step have selected a potential balloon page for - * isolation, re-test the page->mapping flags and the page ref counter + * isolation, re-test the PageBalloon mark and the PagePrivate flag * under the proper page lock, to ensure isolating a valid balloon page * (not yet isolated, nor under release procedure) * + * iv. isolation or dequeueing procedure must clear PagePrivate flag under + * page lock together with removing page from balloon device page list. + * * The functions provided by this interface are placed to help on coping with * the aforementioned balloon page corner case, as well as to ensure the simple * set of exposed rules are satisfied while we are dealing with balloon pages @@ -71,28 +74,6 @@ static inline void balloon_devinfo_free(struct balloon_dev_info *b_dev_info) kfree(b_dev_info); } -/* - * balloon_page_free - release a balloon page back to the page free lists - * @page: ballooned page to be set free - * - * This function must be used to properly set free an isolated/dequeued balloon - * page at the end of a sucessful page migration, or at the balloon driver's - * page release procedure. - */ -static inline void balloon_page_free(struct page *page) -{ - /* - * Balloon pages always get an extra refcount before being isolated - * and before being dequeued to help on sorting out fortuite colisions - * between a thread attempting to isolate and another thread attempting - * to release the very same balloon page. - * - * Before we handle the page back to Buddy, lets drop its extra refcnt. - */ - put_page(page); - __free_page(page); -} - #ifdef CONFIG_BALLOON_COMPACTION extern bool balloon_page_isolate(struct page *page); extern void balloon_page_putback(struct page *page); @@ -108,74 +89,33 @@ static inline void balloon_mapping_free(struct address_space *balloon_mapping) } /* - * page_flags_cleared - helper to perform balloon @page ->flags tests. - * - * As balloon pages are obtained from buddy and we do not play with page->flags - * at driver level (exception made when we get the page lock for compaction), - * we can safely identify a ballooned page by checking if the - * PAGE_FLAGS_CHECK_AT_PREP page->flags are all cleared. This approach also - * helps us skip ballooned pages that are locked for compaction or release, thus - * mitigating their racy check at balloon_page_movable() - */ -static inline bool page_flags_cleared(struct page *page) -{ - return !(page->flags & PAGE_FLAGS_CHECK_AT_PREP); -} - -/* - * __is_movable_balloon_page - helper to perform @page mapping->flags tests + * __is_movable_balloon_page - helper to perform @page PageBalloon tests */ static inline bool __is_movable_balloon_page(struct page *page) { - struct address_space *mapping = page->mapping; - return mapping_balloon(mapping); + return PageBalloon(page); } /* - * balloon_page_movable - test page->mapping->flags to identify balloon pages - * that can be moved by compaction/migration. - * - * This function is used at core compaction's page isolation scheme, therefore - * most pages exposed to it are not enlisted as balloon pages and so, to avoid - * undesired side effects like racing against __free_pages(), we cannot afford - * holding the page locked while testing page->mapping->flags here. + * balloon_page_movable - test PageBalloon to identify balloon pages + * and PagePrivate to check that the page is not + * isolated and can be moved by compaction/migration. * * As we might return false positives in the case of a balloon page being just - * released under us, the page->mapping->flags need to be re-tested later, - * under the proper page lock, at the functions that will be coping with the - * balloon page case. + * released under us, this need to be re-tested later, under the page lock. */ static inline bool balloon_page_movable(struct page *page) { - /* - * Before dereferencing and testing mapping->flags, let's make sure - * this is not a page that uses ->mapping in a different way - */ - if (page_flags_cleared(page) && !page_mapped(page) && - page_count(page) == 1) - return __is_movable_balloon_page(page); - - return false; + return PageBalloon(page) && PagePrivate(page); } /* * isolated_balloon_page - identify an isolated balloon page on private * compaction/migration page lists. - * - * After a compaction thread isolates a balloon page for migration, it raises - * the page refcount to prevent concurrent compaction threads from re-isolating - * the same page. For that reason putback_movable_pages(), or other routines - * that need to identify isolated balloon pages on private pagelists, cannot - * rely on balloon_page_movable() to accomplish the task. */ static inline bool isolated_balloon_page(struct page *page) { - /* Already isolated balloon pages, by default, have a raised refcount */ - if (page_flags_cleared(page) && !page_mapped(page) && - page_count(page) >= 2) - return __is_movable_balloon_page(page); - - return false; + return PageBalloon(page); } /* @@ -192,6 +132,8 @@ static inline void balloon_page_insert(struct page *page, struct address_space *mapping, struct list_head *head) { + __SetPageBalloon(page); + SetPagePrivate(page); page->mapping = mapping; list_add(&page->lru, head); } @@ -206,8 +148,12 @@ static inline void balloon_page_insert(struct page *page, */ static inline void balloon_page_delete(struct page *page) { + __ClearPageBalloon(page); page->mapping = NULL; - list_del(&page->lru); + if (PagePrivate(page)) { + ClearPagePrivate(page); + list_del(&page->lru); + } } /* @@ -258,6 +204,11 @@ static inline void balloon_page_delete(struct page *page) list_del(&page->lru); } +static inline bool __is_movable_balloon_page(struct page *page) +{ + return false; +} + static inline bool balloon_page_movable(struct page *page) { return false; diff --git a/include/linux/migrate.h b/include/linux/migrate.h index b66fd10..01aad3e 100644 --- a/include/linux/migrate.h +++ b/include/linux/migrate.h @@ -13,18 +13,9 @@ typedef void free_page_t(struct page *page, unsigned long private); * Return values from addresss_space_operations.migratepage(): * - negative errno on page migration failure; * - zero on page migration success; - * - * The balloon page migration introduces this special case where a 'distinct' - * return code is used to flag a successful page migration to unmap_and_move(). - * This approach is necessary because page migration can race against balloon - * deflation procedure, and for such case we could introduce a nasty page leak - * if a successfully migrated balloon page gets released concurrently with - * migration's unmap_and_move() wrap-up steps. */ #define MIGRATEPAGE_SUCCESS 0 -#define MIGRATEPAGE_BALLOON_SUCCESS 1 /* special ret code for balloon page - * sucessful migration case. - */ + enum migrate_reason { MR_COMPACTION, MR_MEMORY_FAILURE, diff --git a/include/linux/mm.h b/include/linux/mm.h index ef63711..91001af 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -555,6 +555,25 @@ static inline void __ClearPageBuddy(struct page *page) atomic_set(&page->_mapcount, -1); } +#define PAGE_BALLOON_MAPCOUNT_VALUE (-256) + +static inline int PageBalloon(struct page *page) +{ + return atomic_read(&page->_mapcount) == PAGE_BALLOON_MAPCOUNT_VALUE; +} + +static inline void __SetPageBalloon(struct page *page) +{ + VM_BUG_ON_PAGE(atomic_read(&page->_mapcount) != -1, page); + atomic_set(&page->_mapcount, PAGE_BALLOON_MAPCOUNT_VALUE); +} + +static inline void __ClearPageBalloon(struct page *page) +{ + VM_BUG_ON_PAGE(!PageBalloon(page), page); + atomic_set(&page->_mapcount, -1); +} + void put_page(struct page *page); void put_pages_list(struct list_head *pages); diff --git a/mm/balloon_compaction.c b/mm/balloon_compaction.c index 6e45a50..52abeeb 100644 --- a/mm/balloon_compaction.c +++ b/mm/balloon_compaction.c @@ -93,17 +93,12 @@ struct page *balloon_page_dequeue(struct balloon_dev_info *b_dev_info) * to be released by the balloon driver. */ if (trylock_page(page)) { + if (!PagePrivate(page)) { + /* raced with isolation */ + unlock_page(page); + continue; + } spin_lock_irqsave(&b_dev_info->pages_lock, flags); - /* - * Raise the page refcount here to prevent any wrong - * attempt to isolate this page, in case of coliding - * with balloon_page_isolate() just after we release - * the page lock. - * - * balloon_page_free() will take care of dropping - * this extra refcount later. - */ - get_page(page); balloon_page_delete(page); spin_unlock_irqrestore(&b_dev_info->pages_lock, flags); unlock_page(page); @@ -187,7 +182,9 @@ static inline void __isolate_balloon_page(struct page *page) { struct balloon_dev_info *b_dev_info = page->mapping->private_data; unsigned long flags; + spin_lock_irqsave(&b_dev_info->pages_lock, flags); + ClearPagePrivate(page); list_del(&page->lru); b_dev_info->isolated_pages++; spin_unlock_irqrestore(&b_dev_info->pages_lock, flags); @@ -197,7 +194,9 @@ static inline void __putback_balloon_page(struct page *page) { struct balloon_dev_info *b_dev_info = page->mapping->private_data; unsigned long flags; + spin_lock_irqsave(&b_dev_info->pages_lock, flags); + SetPagePrivate(page); list_add(&page->lru, &b_dev_info->pages); b_dev_info->isolated_pages--; spin_unlock_irqrestore(&b_dev_info->pages_lock, flags); @@ -235,12 +234,11 @@ bool balloon_page_isolate(struct page *page) */ if (likely(trylock_page(page))) { /* - * A ballooned page, by default, has just one refcount. + * A ballooned page, by default, has PagePrivate set. * Prevent concurrent compaction threads from isolating - * an already isolated balloon page by refcount check. + * an already isolated balloon page by clearing it. */ - if (__is_movable_balloon_page(page) && - page_count(page) == 2) { + if (balloon_page_movable(page)) { __isolate_balloon_page(page); unlock_page(page); return true; diff --git a/mm/compaction.c b/mm/compaction.c index 92075d5..67d938b 100644 --- a/mm/compaction.c +++ b/mm/compaction.c @@ -643,7 +643,7 @@ isolate_migratepages_block(struct compact_control *cc, unsigned long low_pfn, */ if (!PageLRU(page)) { if (unlikely(balloon_page_movable(page))) { - if (locked && balloon_page_isolate(page)) { + if (balloon_page_isolate(page)) { /* Successfully isolated */ goto isolate_success; } diff --git a/mm/migrate.c b/mm/migrate.c index c9b5d13..7a31867 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -873,7 +873,7 @@ static int __unmap_and_move(struct page *page, struct page *newpage, } } - if (unlikely(balloon_page_movable(page))) { + if (unlikely(isolated_balloon_page(page))) { /* * A ballooned page does not need any special attention from * physical to virtual reverse mapping procedures. @@ -952,17 +952,6 @@ static int unmap_and_move(new_page_t get_new_page, free_page_t put_new_page, rc = __unmap_and_move(page, newpage, force, mode); - if (unlikely(rc == MIGRATEPAGE_BALLOON_SUCCESS)) { - /* - * A ballooned page has been migrated already. - * Now, it's the time to wrap-up counters, - * handle the page back to Buddy and return. - */ - dec_zone_page_state(page, NR_ISOLATED_ANON + - page_is_file_cache(page)); - balloon_page_free(page); - return MIGRATEPAGE_SUCCESS; - } out: if (rc != -EAGAIN) { /* @@ -985,6 +974,9 @@ out: if (rc != MIGRATEPAGE_SUCCESS && put_new_page) { ClearPageSwapBacked(newpage); put_new_page(newpage, private); + } else if (unlikely(__is_movable_balloon_page(newpage))) { + /* drop our reference, page already in the balloon */ + put_page(newpage); } else putback_lru_page(newpage); ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v3 1/4] mm/balloon_compaction: redesign ballooned pages management 2014-09-27 19:15 ` [PATCH v3 1/4] mm/balloon_compaction: redesign ballooned pages management Konstantin Khlebnikov @ 2014-10-28 18:47 ` Matt Mullins 2014-10-28 19:56 ` Konstantin Khlebnikov 0 siblings, 1 reply; 6+ messages in thread From: Matt Mullins @ 2014-10-28 18:47 UTC (permalink / raw) To: Konstantin Khlebnikov Cc: linux-mm, Andrew Morton, linux-kernel, Konstantin Khlebnikov, Andrey Ryabinin, Rafael Aquini, Stable, Sasha Levin On Sat, Sep 27, 2014 at 11:15:16PM +0400, Konstantin Khlebnikov wrote: > This patch fixes all of them. It seems to have rendered virtio_balloon completely ineffective without CONFIG_COMPACTION and CONFIG_BALLOON_COMPACTION, even for the case that I'm expanding the memory available to my VM. Was this intended? Should Kconfig be updated so that VIRTIO_BALLOON depends on BALLOON_COMPACTION now? ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3 1/4] mm/balloon_compaction: redesign ballooned pages management 2014-10-28 18:47 ` Matt Mullins @ 2014-10-28 19:56 ` Konstantin Khlebnikov 2014-10-28 20:23 ` Matt Mullins 0 siblings, 1 reply; 6+ messages in thread From: Konstantin Khlebnikov @ 2014-10-28 19:56 UTC (permalink / raw) To: Konstantin Khlebnikov, linux-mm@kvack.org, Andrew Morton, Linux Kernel Mailing List, Konstantin Khlebnikov, Andrey Ryabinin, Rafael Aquini, Stable, Sasha Levin On Tue, Oct 28, 2014 at 9:47 PM, Matt Mullins <mmullins@mmlx.us> wrote: > On Sat, Sep 27, 2014 at 11:15:16PM +0400, Konstantin Khlebnikov wrote: >> This patch fixes all of them. > > It seems to have rendered virtio_balloon completely ineffective without > CONFIG_COMPACTION and CONFIG_BALLOON_COMPACTION, even for the case that I'm > expanding the memory available to my VM. What do you mean by ineffective? That it cannot handle fragmentation? I saw that without compaction ballooning works even better: it allocates pages without GFP_MOVABLE and buddy allocator returns much less scattered pages. > > Was this intended? Should Kconfig be updated so that VIRTIO_BALLOON depends on > BALLOON_COMPACTION now? Nope, this is independent feature. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3 1/4] mm/balloon_compaction: redesign ballooned pages management 2014-10-28 19:56 ` Konstantin Khlebnikov @ 2014-10-28 20:23 ` Matt Mullins 2014-10-29 10:51 ` [PATCH] mm/balloon_compaction: fix deflation when compaction is disabled Konstantin Khlebnikov 0 siblings, 1 reply; 6+ messages in thread From: Matt Mullins @ 2014-10-28 20:23 UTC (permalink / raw) To: Konstantin Khlebnikov Cc: linux-mm@kvack.org, Andrew Morton, Linux Kernel Mailing List, Konstantin Khlebnikov, Andrey Ryabinin, Rafael Aquini, Stable, Sasha Levin [-- Attachment #1: Type: text/plain, Size: 1216 bytes --] On Tue, Oct 28, 2014 at 11:56:15PM +0400, Konstantin Khlebnikov wrote: > On Tue, Oct 28, 2014 at 9:47 PM, Matt Mullins <mmullins@mmlx.us> wrote: > > On Sat, Sep 27, 2014 at 11:15:16PM +0400, Konstantin Khlebnikov wrote: > >> This patch fixes all of them. > > > > It seems to have rendered virtio_balloon completely ineffective without > > CONFIG_COMPACTION and CONFIG_BALLOON_COMPACTION, even for the case that I'm > > expanding the memory available to my VM. > > What do you mean by ineffective? Ballooning does not change the amount of memory available at all. Bisecting the change got me back to this patch. I'm currently using 3.18-rc2 and running in qemu-kvm-1.6.2-9.fc20.x86_64 via libvirt-daemon-1.1.3.6-1.fc20.x86_64. I'll attach my .config; enabling COMPACTION and BALLOON_COMPACTION makes virtio-ballooning work again. > That it cannot handle fragmentation? I saw that without compaction > ballooning works even better: > it allocates pages without GFP_MOVABLE and buddy allocator returns > much less scattered pages. > > > > > Was this intended? Should Kconfig be updated so that VIRTIO_BALLOON depends on > > BALLOON_COMPACTION now? > > Nope, this is independent feature. Good to know, thanks. [-- Attachment #2: config-3.18-rc2 --] [-- Type: text/plain, Size: 48963 bytes --] # # Automatically generated file; DO NOT EDIT. # Linux/x86 3.18.0-rc2 Kernel Configuration # CONFIG_64BIT=y CONFIG_X86_64=y CONFIG_X86=y CONFIG_INSTRUCTION_DECODER=y CONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_MMU=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y CONFIG_ARCH_WANT_GENERAL_HUGETLB=y CONFIG_ZONE_DMA32=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_X86_64_SMP=y CONFIG_X86_HT=y CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_EXTABLE_SORT=y # # General setup # CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" # CONFIG_COMPILE_TEST is not set CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_XZ=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_HAVE_KERNEL_LZ4=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set # CONFIG_KERNEL_XZ is not set # CONFIG_KERNEL_LZO is not set # CONFIG_KERNEL_LZ4 is not set CONFIG_DEFAULT_HOSTNAME="(none)" # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_CROSS_MEMORY_ATTACH is not set # CONFIG_FHANDLE is not set # CONFIG_USELIB is not set CONFIG_AUDIT=y CONFIG_HAVE_ARCH_AUDITSYSCALL=y # CONFIG_AUDITSYSCALL is not set # # IRQ subsystem # CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_IRQ_DOMAIN=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_SPARSE_IRQ=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_ARCH_CLOCKSOURCE_DATA=y CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y CONFIG_GENERIC_CMOS_UPDATE=y # # Timers subsystem # CONFIG_HZ_PERIODIC=y # CONFIG_NO_HZ_IDLE is not set # CONFIG_NO_HZ_FULL is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set # # CPU/Task time and stats accounting # CONFIG_VIRT_CPU_ACCOUNTING=y # CONFIG_TICK_CPU_ACCOUNTING is not set CONFIG_VIRT_CPU_ACCOUNTING_GEN=y # CONFIG_IRQ_TIME_ACCOUNTING is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # # RCU Subsystem # CONFIG_TREE_RCU=y # CONFIG_PREEMPT_RCU is not set # CONFIG_TASKS_RCU is not set CONFIG_RCU_STALL_COMMON=y CONFIG_CONTEXT_TRACKING=y CONFIG_RCU_USER_QS=y CONFIG_CONTEXT_TRACKING_FORCE=y CONFIG_RCU_FANOUT=64 CONFIG_RCU_FANOUT_LEAF=16 # CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set CONFIG_RCU_NOCB_CPU=y # CONFIG_RCU_NOCB_CPU_NONE is not set # CONFIG_RCU_NOCB_CPU_ZERO is not set CONFIG_RCU_NOCB_CPU_ALL=y CONFIG_BUILD_BIN2C=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_LOG_CPU_MAX_BUF_SHIFT=14 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y CONFIG_ARCH_SUPPORTS_INT128=y CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set # CONFIG_CGROUP_FREEZER is not set # CONFIG_CGROUP_DEVICE is not set # CONFIG_CPUSETS is not set # CONFIG_CGROUP_CPUACCT is not set CONFIG_RESOURCE_COUNTERS=y CONFIG_MEMCG=y CONFIG_MEMCG_KMEM=y # CONFIG_CGROUP_HUGETLB is not set # CONFIG_CGROUP_PERF is not set # CONFIG_CGROUP_SCHED is not set # CONFIG_BLK_CGROUP is not set # CONFIG_CHECKPOINT_RESTORE is not set CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_IPC_NS=y CONFIG_USER_NS=y CONFIG_PID_NS=y CONFIG_NET_NS=y # CONFIG_SCHED_AUTOGROUP is not set # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_RD_XZ=y CONFIG_RD_LZO=y CONFIG_RD_LZ4=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_HAVE_PCSPKR_PLATFORM=y CONFIG_EXPERT=y # CONFIG_SGETMASK_SYSCALL is not set # CONFIG_SYSFS_SYSCALL is not set # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y # CONFIG_PCSPKR_PLATFORM is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_ADVISE_SYSCALLS=y CONFIG_PCI_QUIRKS=y # CONFIG_EMBEDDED is not set CONFIG_HAVE_PERF_EVENTS=y # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y # CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_SLUB_CPU_PARTIAL=y # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y CONFIG_OPROFILE_NMI_TIMER=y # CONFIG_KPROBES is not set # CONFIG_JUMP_LABEL is not set # CONFIG_UPROBES is not set # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_ARCH_USE_BUILTIN_BSWAP=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_KPROBES_ON_FTRACE=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y CONFIG_HAVE_USER_RETURN_NOTIFIER=y CONFIG_HAVE_PERF_EVENTS_NMI=y CONFIG_HAVE_PERF_REGS=y CONFIG_HAVE_PERF_USER_STACK_DUMP=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y CONFIG_HAVE_CMPXCHG_LOCAL=y CONFIG_HAVE_CMPXCHG_DOUBLE=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_HAVE_CC_STACKPROTECTOR=y # CONFIG_CC_STACKPROTECTOR is not set CONFIG_CC_STACKPROTECTOR_NONE=y # CONFIG_CC_STACKPROTECTOR_REGULAR is not set # CONFIG_CC_STACKPROTECTOR_STRONG is not set CONFIG_HAVE_CONTEXT_TRACKING=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y CONFIG_HAVE_ARCH_SOFT_DIRTY=y CONFIG_MODULES_USE_ELF_RELA=y CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y # # GCOV-based kernel profiling # # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_MODULE_SIG is not set # CONFIG_MODULE_COMPRESS is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_BSGLIB is not set CONFIG_BLK_DEV_INTEGRITY=y # CONFIG_BLK_CMDLINE_PARSER is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_AIX_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_CMDLINE_PARTITION is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_INLINE_SPIN_UNLOCK_IRQ=y CONFIG_INLINE_READ_UNLOCK=y CONFIG_INLINE_READ_UNLOCK_IRQ=y CONFIG_INLINE_WRITE_UNLOCK=y CONFIG_INLINE_WRITE_UNLOCK_IRQ=y CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y CONFIG_MUTEX_SPIN_ON_OWNER=y CONFIG_RWSEM_SPIN_ON_OWNER=y CONFIG_ARCH_USE_QUEUE_RWLOCK=y CONFIG_QUEUE_RWLOCK=y # CONFIG_FREEZER is not set # # Processor type and features # # CONFIG_ZONE_DMA is not set CONFIG_SMP=y CONFIG_X86_FEATURE_NAMES=y # CONFIG_X86_MPPARSE is not set # CONFIG_X86_EXTENDED_PLATFORM is not set # CONFIG_X86_INTEL_LPSS is not set # CONFIG_IOSF_MBI is not set # CONFIG_SCHED_OMIT_FRAME_POINTER is not set CONFIG_HYPERVISOR_GUEST=y CONFIG_PARAVIRT=y # CONFIG_PARAVIRT_DEBUG is not set # CONFIG_PARAVIRT_SPINLOCKS is not set # CONFIG_XEN is not set CONFIG_KVM_GUEST=y # CONFIG_PARAVIRT_TIME_ACCOUNTING is not set CONFIG_PARAVIRT_CLOCK=y CONFIG_NO_BOOTMEM=y # CONFIG_MEMTEST is not set # CONFIG_MK8 is not set # CONFIG_MPSC is not set CONFIG_MCORE2=y # CONFIG_MATOM is not set # CONFIG_GENERIC_CPU is not set CONFIG_X86_INTERNODE_CACHE_SHIFT=6 CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_P6_NOP=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_PROCESSOR_SELECT=y CONFIG_CPU_SUP_INTEL=y # CONFIG_CPU_SUP_AMD is not set # CONFIG_CPU_SUP_CENTAUR is not set CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y # CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y # CONFIG_MAXSMP is not set CONFIG_NR_CPUS=8 # CONFIG_SCHED_SMT is not set # CONFIG_SCHED_MC is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y # CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set # CONFIG_X86_MCE is not set # CONFIG_X86_16BIT is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_MICROCODE_INTEL_EARLY is not set # CONFIG_MICROCODE_AMD_EARLY is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y # CONFIG_NUMA is not set CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y # CONFIG_SPARSEMEM_VMEMMAP is not set CONFIG_HAVE_MEMBLOCK=y CONFIG_HAVE_MEMBLOCK_NODE_MAP=y CONFIG_ARCH_DISCARD_MEMBLOCK=y # CONFIG_HAVE_BOOTMEM_INFO_NODE is not set # CONFIG_MEMORY_HOTPLUG is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y CONFIG_MEMORY_BALLOON=y # CONFIG_COMPACTION is not set CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # CONFIG_TRANSPARENT_HUGEPAGE is not set # CONFIG_CLEANCACHE is not set # CONFIG_CMA is not set # CONFIG_ZPOOL is not set # CONFIG_ZBUD is not set # CONFIG_ZSMALLOC is not set CONFIG_GENERIC_EARLY_IOREMAP=y # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW=64 CONFIG_MTRR=y # CONFIG_MTRR_SANITIZER is not set CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_ARCH_RANDOM=y # CONFIG_X86_SMAP is not set # CONFIG_EFI is not set # CONFIG_SECCOMP is not set CONFIG_HZ_100=y # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 # CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x1000000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x1000000 # CONFIG_HOTPLUG_CPU is not set # CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # # Power management and ACPI options # # CONFIG_SUSPEND is not set # CONFIG_PM_RUNTIME is not set CONFIG_ACPI=y CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y # CONFIG_ACPI_PROCFS_POWER is not set # CONFIG_ACPI_EC_DEBUGFS is not set # CONFIG_ACPI_AC is not set # CONFIG_ACPI_BATTERY is not set # CONFIG_ACPI_BUTTON is not set # CONFIG_ACPI_FAN is not set # CONFIG_ACPI_DOCK is not set CONFIG_ACPI_PROCESSOR=y # CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set # CONFIG_ACPI_THERMAL is not set CONFIG_ACPI_CUSTOM_DSDT_FILE="" # CONFIG_ACPI_CUSTOM_DSDT is not set # CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set # CONFIG_ACPI_DEBUG is not set # CONFIG_ACPI_PCI_SLOT is not set CONFIG_X86_PM_TIMER=y # CONFIG_ACPI_CONTAINER is not set # CONFIG_ACPI_SBS is not set # CONFIG_ACPI_HED is not set # CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set CONFIG_HAVE_ACPI_APEI=y CONFIG_HAVE_ACPI_APEI_NMI=y # CONFIG_ACPI_APEI is not set # CONFIG_SFI is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # CPU Idle # CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set # CONFIG_INTEL_IDLE is not set # # Memory power savings # # CONFIG_I7300_IDLE is not set # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y # CONFIG_PCI_MMCONFIG is not set CONFIG_PCI_DOMAINS=y # CONFIG_PCI_CNB20LE_QUIRK is not set CONFIG_PCIEPORTBUS=y CONFIG_HOTPLUG_PCI_PCIE=y CONFIG_PCIEAER=y # CONFIG_PCIE_ECRC is not set # CONFIG_PCIEAER_INJECT is not set CONFIG_PCIEASPM=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM_DEFAULT=y # CONFIG_PCIEASPM_POWERSAVE is not set # CONFIG_PCIEASPM_PERFORMANCE is not set # CONFIG_PCI_MSI is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_REALLOC_ENABLE_AUTO is not set # CONFIG_PCI_STUB is not set # CONFIG_HT_IRQ is not set # CONFIG_PCI_IOV is not set # CONFIG_PCI_PRI is not set # CONFIG_PCI_PASID is not set # CONFIG_PCI_IOAPIC is not set CONFIG_PCI_LABEL=y # # PCI host controller drivers # # CONFIG_ISA_DMA_API is not set # CONFIG_PCCARD is not set CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_ACPI=y # CONFIG_HOTPLUG_PCI_ACPI_IBM is not set # CONFIG_HOTPLUG_PCI_CPCI is not set # CONFIG_HOTPLUG_PCI_SHPC is not set # CONFIG_RAPIDIO is not set CONFIG_X86_SYSFB=y # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_BINFMT_SCRIPT=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_COREDUMP=y # CONFIG_IA32_EMULATION is not set CONFIG_X86_DEV_DMA_OPS=y CONFIG_PMC_ATOM=y CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_DIAG is not set CONFIG_UNIX=y # CONFIG_UNIX_DIAG is not set CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y # CONFIG_IP_PNP_BOOTP is not set # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE_DEMUX is not set CONFIG_NET_IP_TUNNEL=y # CONFIG_SYN_COOKIES is not set CONFIG_NET_UDP_TUNNEL=y CONFIG_NET_FOU=y # CONFIG_GENEVE is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_NETLABEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NET_PTP_CLASSIFY is not set # CONFIG_NETWORK_PHY_TIMESTAMPING is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_L2TP is not set CONFIG_STP=y CONFIG_BRIDGE=y CONFIG_BRIDGE_IGMP_SNOOPING=y CONFIG_HAVE_NET_DSA=y # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_PHONET is not set # CONFIG_IEEE802154 is not set CONFIG_NET_SCHED=y # # Queueing/Scheduling # # CONFIG_NET_SCH_CBQ is not set # CONFIG_NET_SCH_HTB is not set # CONFIG_NET_SCH_HFSC is not set # CONFIG_NET_SCH_PRIO is not set # CONFIG_NET_SCH_MULTIQ is not set # CONFIG_NET_SCH_RED is not set # CONFIG_NET_SCH_SFB is not set # CONFIG_NET_SCH_SFQ is not set # CONFIG_NET_SCH_TEQL is not set # CONFIG_NET_SCH_TBF is not set # CONFIG_NET_SCH_GRED is not set # CONFIG_NET_SCH_DSMARK is not set # CONFIG_NET_SCH_NETEM is not set # CONFIG_NET_SCH_DRR is not set # CONFIG_NET_SCH_MQPRIO is not set # CONFIG_NET_SCH_CHOKE is not set # CONFIG_NET_SCH_QFQ is not set # CONFIG_NET_SCH_CODEL is not set # CONFIG_NET_SCH_FQ_CODEL is not set # CONFIG_NET_SCH_FQ is not set # CONFIG_NET_SCH_HHF is not set # CONFIG_NET_SCH_PIE is not set CONFIG_NET_SCH_INGRESS=y # CONFIG_NET_SCH_PLUG is not set # # Classification # CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=y # CONFIG_NET_CLS_TCINDEX is not set # CONFIG_NET_CLS_ROUTE4 is not set # CONFIG_NET_CLS_FW is not set CONFIG_NET_CLS_U32=y CONFIG_CLS_U32_PERF=y CONFIG_CLS_U32_MARK=y # CONFIG_NET_CLS_RSVP is not set # CONFIG_NET_CLS_RSVP6 is not set # CONFIG_NET_CLS_FLOW is not set # CONFIG_NET_CLS_CGROUP is not set # CONFIG_NET_CLS_BPF is not set CONFIG_NET_EMATCH=y CONFIG_NET_EMATCH_STACK=32 # CONFIG_NET_EMATCH_CMP is not set # CONFIG_NET_EMATCH_NBYTE is not set CONFIG_NET_EMATCH_U32=y # CONFIG_NET_EMATCH_META is not set # CONFIG_NET_EMATCH_TEXT is not set CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=y CONFIG_NET_ACT_GACT=y CONFIG_GACT_PROB=y CONFIG_NET_ACT_MIRRED=y CONFIG_NET_ACT_NAT=y CONFIG_NET_ACT_PEDIT=y CONFIG_NET_ACT_SIMP=y CONFIG_NET_ACT_SKBEDIT=y CONFIG_NET_ACT_CSUM=y CONFIG_NET_CLS_IND=y CONFIG_NET_SCH_FIFO=y # CONFIG_DCB is not set # CONFIG_BATMAN_ADV is not set # CONFIG_OPENVSWITCH is not set # CONFIG_VSOCKETS is not set # CONFIG_NETLINK_MMAP is not set # CONFIG_NETLINK_DIAG is not set # CONFIG_NET_MPLS_GSO is not set # CONFIG_HSR is not set CONFIG_RPS=y CONFIG_RFS_ACCEL=y CONFIG_XPS=y # CONFIG_CGROUP_NET_PRIO is not set # CONFIG_CGROUP_NET_CLASSID is not set CONFIG_NET_RX_BUSY_POLL=y CONFIG_BQL=y # CONFIG_BPF_JIT is not set CONFIG_NET_FLOW_LIMIT=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set CONFIG_NET_9P=y CONFIG_NET_9P_VIRTIO=y # CONFIG_NET_9P_DEBUG is not set # CONFIG_CAIF is not set # CONFIG_CEPH_LIB is not set # CONFIG_NFC is not set CONFIG_HAVE_BPF_JIT=y # # Device Drivers # # # Generic Driver Options # # CONFIG_UEVENT_HELPER is not set CONFIG_DEVTMPFS=y # CONFIG_DEVTMPFS_MOUNT is not set # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_EXTRA_FIRMWARE="" # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set # CONFIG_DISABLE_DEV_COREDUMP is not set # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_GENERIC_CPU_DEVICES is not set CONFIG_GENERIC_CPU_AUTOPROBE=y # CONFIG_DMA_SHARED_BUFFER is not set # # Bus devices # # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y # CONFIG_PARPORT is not set CONFIG_PNP=y CONFIG_PNP_DEBUG_MESSAGES=y # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_NULL_BLK is not set # CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_NVME is not set # CONFIG_BLK_DEV_SKD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_VIRTIO_BLK=y # CONFIG_BLK_DEV_HD is not set # CONFIG_BLK_DEV_RBD is not set # CONFIG_BLK_DEV_RSXX is not set # # Misc devices # # CONFIG_SENSORS_LIS3LV02D is not set # CONFIG_DUMMY_IRQ is not set # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_VMWARE_BALLOON is not set # CONFIG_SRAM is not set # CONFIG_C2PORT is not set # # EEPROM support # # CONFIG_EEPROM_93CX6 is not set # CONFIG_CB710_CORE is not set # # Texas Instruments shared transport line discipline # # # Altera FPGA firmware download module # # CONFIG_VMWARE_VMCI is not set # # Intel MIC Bus Driver # # CONFIG_INTEL_MIC_BUS is not set # # Intel MIC Host Driver # # # Intel MIC Card Driver # # CONFIG_GENWQE is not set # CONFIG_ECHO is not set # CONFIG_CXL_BASE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_MQ_DEFAULT is not set # CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set # # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_ISCSI_BOOT_SYSFS is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_CXGB4_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_MVUMI is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_SCSI_ESAS2R is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_MPT3SAS is not set # CONFIG_SCSI_UFSHCD is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_VMWARE_PVSCSI is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_ISCI is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_PM8001 is not set CONFIG_SCSI_VIRTIO=y # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_MD=y # CONFIG_BLK_DEV_MD is not set # CONFIG_BCACHE is not set CONFIG_BLK_DEV_DM_BUILTIN=y CONFIG_BLK_DEV_DM=y CONFIG_DM_DEBUG=y CONFIG_DM_BUFIO=y CONFIG_DM_BIO_PRISON=y CONFIG_DM_PERSISTENT_DATA=y # CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set # CONFIG_DM_CRYPT is not set CONFIG_DM_SNAPSHOT=y CONFIG_DM_THIN_PROVISIONING=y # CONFIG_DM_CACHE is not set # CONFIG_DM_ERA is not set # CONFIG_DM_MIRROR is not set # CONFIG_DM_RAID is not set # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set # CONFIG_DM_UEVENT is not set # CONFIG_DM_FLAKEY is not set # CONFIG_DM_VERITY is not set # CONFIG_DM_SWITCH is not set # CONFIG_TARGET_CORE is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set # CONFIG_FIREWIRE_NOSY is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y CONFIG_NET_CORE=y # CONFIG_BONDING is not set CONFIG_DUMMY=y # CONFIG_EQUALIZER is not set # CONFIG_NET_FC is not set # CONFIG_IFB is not set # CONFIG_NET_TEAM is not set # CONFIG_MACVLAN is not set # CONFIG_VXLAN is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set CONFIG_TUN=y CONFIG_VETH=y CONFIG_VIRTIO_NET=y CONFIG_NLMON=y # CONFIG_ARCNET is not set # # CAIF transport drivers # # # Distributed Switch Architecture drivers # # CONFIG_NET_DSA_MV88E6XXX is not set # CONFIG_NET_DSA_MV88E6060 is not set # CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set # CONFIG_NET_DSA_MV88E6131 is not set # CONFIG_NET_DSA_MV88E6123_61_65 is not set # CONFIG_NET_DSA_MV88E6171 is not set # CONFIG_NET_DSA_BCM_SF2 is not set # CONFIG_ETHERNET is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_NET_SB1000 is not set # CONFIG_PHYLIB is not set CONFIG_PPP=y # CONFIG_PPP_BSDCOMP is not set # CONFIG_PPP_DEFLATE is not set # CONFIG_PPP_FILTER is not set # CONFIG_PPP_MPPE is not set CONFIG_PPP_MULTILINK=y # CONFIG_PPPOE is not set CONFIG_PPP_ASYNC=y CONFIG_PPP_SYNC_TTY=y # CONFIG_SLIP is not set CONFIG_SLHC=y # # Host-side USB support is needed for USB Network Adapter support # # CONFIG_WLAN is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # CONFIG_WAN is not set # CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # CONFIG_INPUT_SPARSEKMAP is not set # CONFIG_INPUT_MATRIXKMAP is not set # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # # CONFIG_SERIO is not set CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_TTY=y # CONFIG_VT is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # CONFIG_N_GSM is not set # CONFIG_TRACE_SINK is not set # CONFIG_DEVKMEM is not set # # Serial drivers # CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # CONFIG_SERIAL_8250_DW is not set # CONFIG_SERIAL_8250_FINTEK is not set # # Non-8250 serial port support # # CONFIG_SERIAL_KGDB_NMI is not set # CONFIG_SERIAL_MFD_HSU is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_CONSOLE_POLL=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_SCCNXP is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set # CONFIG_SERIAL_ARC is not set # CONFIG_SERIAL_RP2 is not set # CONFIG_SERIAL_FSL_LPUART is not set # CONFIG_TTY_PRINTK is not set # CONFIG_VIRTIO_CONSOLE is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y # CONFIG_XILLYBUS is not set # # I2C support # # CONFIG_I2C is not set # CONFIG_SPI is not set # CONFIG_SPMI is not set # CONFIG_HSI is not set # # PPS support # # CONFIG_PPS is not set # # PPS generators support # # # PTP clock support # # CONFIG_PTP_1588_CLOCK is not set # # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_POWER_AVS is not set # CONFIG_HWMON is not set CONFIG_THERMAL=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set # CONFIG_THERMAL_GOV_FAIR_SHARE is not set CONFIG_THERMAL_GOV_STEP_WISE=y # CONFIG_THERMAL_GOV_BANG_BANG is not set # CONFIG_THERMAL_GOV_USER_SPACE is not set # CONFIG_THERMAL_EMULATION is not set # CONFIG_INTEL_POWERCLAMP is not set # CONFIG_INT340X_THERMAL is not set # # Texas Instruments thermal drivers # # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set CONFIG_BCMA_POSSIBLE=y # # Broadcom specific AMBA # # CONFIG_BCMA is not set # # Multifunction device drivers # # CONFIG_MFD_CORE is not set # CONFIG_MFD_CROS_EC is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_LPC_ICH is not set # CONFIG_LPC_SCH is not set # CONFIG_MFD_JANZ_CMODIO is not set # CONFIG_MFD_KEMPLD is not set # CONFIG_MFD_RDC321X is not set # CONFIG_MFD_RTSX_PCI is not set # CONFIG_MFD_SM501 is not set # CONFIG_ABX500_CORE is not set # CONFIG_MFD_SYSCON is not set # CONFIG_MFD_TI_AM335X_TSCADC is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_VX855 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set # CONFIG_VGA_ARB is not set # CONFIG_VGA_SWITCHEROO is not set # # Direct Rendering Manager # # CONFIG_DRM is not set # # Frame buffer Devices # # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # CONFIG_VGASTATE is not set # CONFIG_SOUND is not set # # HID support # # CONFIG_HID is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SUPPORT is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_SYSTOHC=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # SPI RTC drivers # # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_DS2404 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # # CONFIG_RTC_DRV_XGENE is not set # # HID Sensor RTC drivers # # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_VIRT_DRIVERS is not set CONFIG_VIRTIO=y # # Virtio drivers # CONFIG_VIRTIO_PCI=y CONFIG_VIRTIO_BALLOON=y # CONFIG_VIRTIO_MMIO is not set # # Microsoft Hyper-V guest support # # CONFIG_HYPERV is not set # CONFIG_STAGING is not set # CONFIG_X86_PLATFORM_DEVICES is not set # CONFIG_CHROME_PLATFORMS is not set # # SOC (System On Chip) specific Drivers # # CONFIG_SOC_TI is not set # # Hardware Spinlock drivers # # # Clock Source drivers # CONFIG_CLKEVT_I8253=y CONFIG_CLKBLD_I8253=y # CONFIG_ATMEL_PIT is not set # CONFIG_SH_TIMER_CMT is not set # CONFIG_SH_TIMER_MTU2 is not set # CONFIG_SH_TIMER_TMU is not set # CONFIG_EM_TIMER_STI is not set # CONFIG_MAILBOX is not set # CONFIG_IOMMU_SUPPORT is not set # # Remoteproc drivers # # CONFIG_STE_MODEM_RPROC is not set # # Rpmsg drivers # # # SOC (System On Chip) specific Drivers # # CONFIG_PM_DEVFREQ is not set # CONFIG_EXTCON is not set # CONFIG_MEMORY is not set # CONFIG_IIO is not set # CONFIG_NTB is not set # CONFIG_VME_BUS is not set # CONFIG_PWM is not set # CONFIG_IPACK_BUS is not set # CONFIG_RESET_CONTROLLER is not set # CONFIG_FMC is not set # # PHY Subsystem # # CONFIG_GENERIC_PHY is not set # CONFIG_BCM_KONA_USB2_PHY is not set # CONFIG_POWERCAP is not set # CONFIG_MCB is not set CONFIG_RAS=y # CONFIG_THUNDERBOLT is not set # # Firmware Drivers # # CONFIG_EDD is not set CONFIG_FIRMWARE_MEMMAP=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set # CONFIG_DMIID is not set # CONFIG_DMI_SYSFS is not set CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y # CONFIG_ISCSI_IBFT_FIND is not set # CONFIG_GOOGLE_FIRMWARE is not set # # File systems # CONFIG_DCACHE_WORD_ACCESS=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set CONFIG_EXT4_FS=y CONFIG_EXT4_USE_FOR_EXT23=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y CONFIG_EXT4_DEBUG=y CONFIG_JBD2=y CONFIG_JBD2_DEBUG=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_XFS_FS=y # CONFIG_XFS_QUOTA is not set CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set # CONFIG_XFS_WARN is not set # CONFIG_XFS_DEBUG is not set # CONFIG_GFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_EXPORTFS=y CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY_USER=y CONFIG_FANOTIFY=y # CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set # CONFIG_QUOTA is not set # CONFIG_QUOTACTL is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set CONFIG_OVERLAYFS_FS=y # # Caches # # CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # # CONFIG_MSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_KERNFS=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_TMPFS_XATTR is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set CONFIG_SQUASHFS=y CONFIG_SQUASHFS_FILE_CACHE=y # CONFIG_SQUASHFS_FILE_DIRECT is not set CONFIG_SQUASHFS_DECOMP_SINGLE=y # CONFIG_SQUASHFS_DECOMP_MULTI is not set # CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set # CONFIG_SQUASHFS_XATTR is not set CONFIG_SQUASHFS_ZLIB=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y # CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set # CONFIG_SQUASHFS_EMBEDDED is not set CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_QNX6FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_PSTORE is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_F2FS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V2=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_SWAP is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_GRACE_PERIOD=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_SUNRPC_DEBUG is not set # CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set CONFIG_9P_FS=y # CONFIG_9P_FS_POSIX_ACL is not set CONFIG_9P_FS_SECURITY=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_MAC_ROMAN is not set # CONFIG_NLS_MAC_CELTIC is not set # CONFIG_NLS_MAC_CENTEURO is not set # CONFIG_NLS_MAC_CROATIAN is not set # CONFIG_NLS_MAC_CYRILLIC is not set # CONFIG_NLS_MAC_GAELIC is not set # CONFIG_NLS_MAC_GREEK is not set # CONFIG_NLS_MAC_ICELAND is not set # CONFIG_NLS_MAC_INUIT is not set # CONFIG_NLS_MAC_ROMANIAN is not set # CONFIG_NLS_MAC_TURKISH is not set # CONFIG_NLS_UTF8 is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # # printk and dmesg options # CONFIG_PRINTK_TIME=y CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 # CONFIG_BOOT_PRINTK_DELAY is not set # # Compile-time checks and compiler options # CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_INFO_REDUCED is not set CONFIG_DEBUG_INFO_SPLIT=y CONFIG_DEBUG_INFO_DWARF4=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=2048 # CONFIG_STRIP_ASM_SYMS is not set # CONFIG_READABLE_ASM is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_SECTION_MISMATCH is not set CONFIG_ARCH_WANT_FRAME_POINTERS=y # CONFIG_FRAME_POINTER is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set CONFIG_MAGIC_SYSRQ=y CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 CONFIG_DEBUG_KERNEL=y # # Memory Debugging # # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set CONFIG_HAVE_DEBUG_KMEMLEAK=y # CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_VIRTUAL is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_PER_CPU_MAPS is not set CONFIG_HAVE_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACKOVERFLOW is not set CONFIG_HAVE_ARCH_KMEMCHECK=y # CONFIG_KMEMCHECK is not set # CONFIG_DEBUG_SHIRQ is not set # # Debug Lockups and Hangs # # CONFIG_LOCKUP_DETECTOR is not set # CONFIG_DETECT_HUNG_TASK is not set # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 CONFIG_PANIC_TIMEOUT=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set CONFIG_SCHED_STACK_END_CHECK=y # CONFIG_TIMER_STATS is not set # # Lock Debugging (spinlocks, mutexes, etc...) # # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_ATOMIC_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_LOCK_TORTURE_TEST is not set CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_PI_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_DEBUG_CREDENTIALS is not set # # RCU Debugging # # CONFIG_SPARSE_RCU_POINTER is not set # CONFIG_TORTURE_TEST is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_RCU_CPU_STALL_TIMEOUT=21 # CONFIG_RCU_CPU_STALL_INFO is not set # CONFIG_RCU_TRACE is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_NOTIFIER_ERROR_INJECTION is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y # CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_FENTRY=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # # Runtime Testing # # CONFIG_TEST_LIST_SORT is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_RBTREE_TEST is not set # CONFIG_INTERVAL_TREE_TEST is not set # CONFIG_PERCPU_TEST is not set # CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_TEST_STRING_HELPERS is not set # CONFIG_TEST_KSTRTOX is not set # CONFIG_TEST_RHASHTABLE is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_TEST_LKM is not set # CONFIG_TEST_USER_COPY is not set # CONFIG_TEST_BPF is not set # CONFIG_TEST_FIRMWARE is not set # CONFIG_TEST_UDELAY is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_KGDB=y CONFIG_KGDB_SERIAL_CONSOLE=y # CONFIG_KGDB_TESTS is not set # CONFIG_KGDB_LOW_LEVEL_TRAP is not set CONFIG_KGDB_KDB=y CONFIG_KDB_CONTINUE_CATASTROPHIC=0 # CONFIG_STRICT_DEVMEM is not set # CONFIG_X86_VERBOSE_BOOTUP is not set CONFIG_EARLY_PRINTK=y # CONFIG_EARLY_PRINTK_DBGP is not set # CONFIG_X86_PTDUMP is not set CONFIG_DEBUG_RODATA=y CONFIG_DEBUG_RODATA_TEST=y # CONFIG_DEBUG_SET_MODULE_RONX is not set # CONFIG_DEBUG_NX_TEST is not set CONFIG_DOUBLEFAULT=y # CONFIG_DEBUG_TLBFLUSH is not set # CONFIG_IOMMU_STRESS is not set CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 # CONFIG_CPA_DEBUG is not set # CONFIG_OPTIMIZE_INLINING is not set # CONFIG_DEBUG_NMI_SELFTEST is not set # CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY_DMESG_RESTRICT is not set CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y # CONFIG_SECURITY_PATH is not set CONFIG_LSM_MMAP_MIN_ADDR=65536 CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set # CONFIG_SECURITY_SMACK is not set # CONFIG_SECURITY_TOMOYO is not set # CONFIG_SECURITY_APPARMOR is not set # CONFIG_SECURITY_YAMA is not set # CONFIG_INTEGRITY is not set CONFIG_DEFAULT_SECURITY_SELINUX=y # CONFIG_DEFAULT_SECURITY_DAC is not set CONFIG_DEFAULT_SECURITY="selinux" CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_USER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_PCRYPT is not set # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_MCRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set # # Authenticated Encryption with Associated Data # # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_SEQIV is not set # # Block modes # # CONFIG_CRYPTO_CBC is not set # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set # CONFIG_CRYPTO_ECB is not set # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_XTS is not set # # Hash modes # # CONFIG_CRYPTO_CMAC is not set # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_CRC32C_INTEL is not set # CONFIG_CRYPTO_CRC32 is not set # CONFIG_CRYPTO_CRC32_PCLMUL is not set CONFIG_CRYPTO_CRCT10DIF=y # CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set # CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA1_SSSE3 is not set # CONFIG_CRYPTO_SHA256_SSSE3 is not set # CONFIG_CRYPTO_SHA512_SSSE3 is not set # CONFIG_CRYPTO_SHA1_MB is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set # # Ciphers # CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_AES_X86_64 is not set # CONFIG_CRYPTO_AES_NI_INTEL is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_BLOWFISH_X86_64 is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAMELLIA_X86_64 is not set # CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set # CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_DES3_EDE_X86_64 is not set # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SALSA20_X86_64 is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set # CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set # CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_TWOFISH_X86_64 is not set # CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set # CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set # # Compression # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_LZ4 is not set # CONFIG_CRYPTO_LZ4HC is not set # # Random Number Generation # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_DRBG_MENU is not set # CONFIG_CRYPTO_USER_API_HASH is not set # CONFIG_CRYPTO_USER_API_SKCIPHER is not set # CONFIG_CRYPTO_HW is not set CONFIG_HAVE_KVM=y # CONFIG_VIRTUALIZATION is not set # CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y CONFIG_GENERIC_NET_UTILS=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_PCI_IOMAP=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_IO=y CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y CONFIG_ARCH_HAS_FAST_MULTIPLIER=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC32_SELFTEST is not set CONFIG_CRC32_SLICEBY8=y # CONFIG_CRC32_SLICEBY4 is not set # CONFIG_CRC32_SARWATE is not set # CONFIG_CRC32_BIT is not set # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=y # CONFIG_CRC8 is not set # CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set # CONFIG_RANDOM32_SELFTEST is not set CONFIG_ZLIB_INFLATE=y CONFIG_LZO_DECOMPRESS=y CONFIG_LZ4_DECOMPRESS=y CONFIG_XZ_DEC=y CONFIG_XZ_DEC_X86=y CONFIG_XZ_DEC_POWERPC=y CONFIG_XZ_DEC_IA64=y CONFIG_XZ_DEC_ARM=y CONFIG_XZ_DEC_ARMTHUMB=y CONFIG_XZ_DEC_SPARC=y CONFIG_XZ_DEC_BCJ=y # CONFIG_XZ_DEC_TEST is not set CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y CONFIG_DECOMPRESS_XZ=y CONFIG_DECOMPRESS_LZO=y CONFIG_DECOMPRESS_LZ4=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT_MAP=y CONFIG_HAS_DMA=y CONFIG_CPU_RMAP=y CONFIG_DQL=y CONFIG_NLATTR=y CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y CONFIG_AVERAGE=y # CONFIG_CORDIC is not set # CONFIG_DDR is not set CONFIG_ARCH_HAS_SG_CHAIN=y ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] mm/balloon_compaction: fix deflation when compaction is disabled 2014-10-28 20:23 ` Matt Mullins @ 2014-10-29 10:51 ` Konstantin Khlebnikov 2014-10-30 1:06 ` Matt Mullins 0 siblings, 1 reply; 6+ messages in thread From: Konstantin Khlebnikov @ 2014-10-29 10:51 UTC (permalink / raw) To: linux-mm, Andrew Morton, Matt Mullins, linux-kernel, Rafael Aquini Cc: Sasha Levin, stable Fix for commit d6d86c0a7f8ddc5b38cf089222cb1d9540762dc2 ("mm/balloon_compaction: redesign ballooned pages management"). If CONFIG_BALLOON_COMPACTION=n balloon_page_insert() does not link pages with balloon and doesn't set PagePrivate flag, as a result balloon_page_dequeue cannot get any pages because it thinks that all of them are isolated. Without balloon compaction nobody can isolate ballooned pages, it's safe to remove this check. Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com> Reported-by: Matt Mullins <mmullins@mmlx.us> Cc: Stable <stable@vger.kernel.org> (v3.17) --- mm/balloon_compaction.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/balloon_compaction.c b/mm/balloon_compaction.c index b3cbe19..fcad832 100644 --- a/mm/balloon_compaction.c +++ b/mm/balloon_compaction.c @@ -68,11 +68,13 @@ struct page *balloon_page_dequeue(struct balloon_dev_info *b_dev_info) * to be released by the balloon driver. */ if (trylock_page(page)) { +#ifdef CONFIG_BALLOON_COMPACTION if (!PagePrivate(page)) { /* raced with isolation */ unlock_page(page); continue; } +#endif spin_lock_irqsave(&b_dev_info->pages_lock, flags); balloon_page_delete(page); __count_vm_event(BALLOON_DEFLATE); ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] mm/balloon_compaction: fix deflation when compaction is disabled 2014-10-29 10:51 ` [PATCH] mm/balloon_compaction: fix deflation when compaction is disabled Konstantin Khlebnikov @ 2014-10-30 1:06 ` Matt Mullins 0 siblings, 0 replies; 6+ messages in thread From: Matt Mullins @ 2014-10-30 1:06 UTC (permalink / raw) To: Konstantin Khlebnikov Cc: linux-mm, Andrew Morton, Matt Mullins, linux-kernel, Rafael Aquini, Sasha Levin, stable On Wed, Oct 29, 2014 at 02:51:07PM +0400, Konstantin Khlebnikov wrote: > Fix for commit d6d86c0a7f8ddc5b38cf089222cb1d9540762dc2 > ("mm/balloon_compaction: redesign ballooned pages management"). > > If CONFIG_BALLOON_COMPACTION=n balloon_page_insert() does not link > pages with balloon and doesn't set PagePrivate flag, as a result > balloon_page_dequeue cannot get any pages because it thinks that > all of them are isolated. Without balloon compaction nobody can > isolate ballooned pages, it's safe to remove this check. > > Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com> > Reported-by: Matt Mullins <mmullins@mmlx.us> > Cc: Stable <stable@vger.kernel.org> (v3.17) That seems to do it, thanks! Tested-by: Matt Mullins <mmullins@mmlx.us> ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-10-30 1:06 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20140927183403.13738.22121.stgit@zurg>
2014-09-27 19:15 ` [PATCH v3 1/4] mm/balloon_compaction: redesign ballooned pages management Konstantin Khlebnikov
2014-10-28 18:47 ` Matt Mullins
2014-10-28 19:56 ` Konstantin Khlebnikov
2014-10-28 20:23 ` Matt Mullins
2014-10-29 10:51 ` [PATCH] mm/balloon_compaction: fix deflation when compaction is disabled Konstantin Khlebnikov
2014-10-30 1:06 ` Matt Mullins
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox