Linux kernel -stable discussions
 help / color / mirror / Atom feed
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: Stable <stable@vger.kernel.org>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>,
	Ulf Hansson <ulf.hansson@linaro.org>
Subject: [PATCH] mmc: sdhci-xenon: Fix clock resource by adding an optional bus clock
Date: Thu, 12 Oct 2017 18:13:51 +0200	[thread overview]
Message-ID: <20171012161351.21852-1-gregory.clement@free-electrons.com> (raw)

On Armada 7K/8K we need to explicitly enable the bus clock. The bus clock
is optional because not all the SoCs need them but at least for Armada
7K/8K it is actually mandatory.

The binding documentation is updating accordingly.

Without this patch the kernel hand during boot if the mvpp2.2 network
driver was not present in the kernel. Indeed the clock needed by the
xenon controller was set by the network driver.

commit bb16ea1742c8f35a9349b7508dc45d3a922db5f5 upstream

Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core
functionality)"
CC: Stable <stable@vger.kernel.org>
Tested-by: Zhoujie Wu <zjwu@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 .../bindings/mmc/marvell,xenon-sdhci.txt           | 12 +++++++-----
 drivers/mmc/host/sdhci-xenon.c                     | 22 ++++++++++++++++++----
 drivers/mmc/host/sdhci-xenon.h                     |  1 +
 3 files changed, 26 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
index b878a1e305af..ed1456f5c94d 100644
--- a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
@@ -16,11 +16,13 @@ Required Properties:
 
 - clocks:
   Array of clocks required for SDHC.
-  Require at least input clock for Xenon IP core.
+  Require at least input clock for Xenon IP core. For Armada AP806 and
+  CP110, the AXI clock is also mandatory.
 
 - clock-names:
   Array of names corresponding to clocks property.
   The input clock for Xenon IP core should be named as "core".
+  The input clock for the AXI bus must be named as "axi".
 
 - reg:
   * For "marvell,armada-3700-sdhci", two register areas.
@@ -106,8 +108,8 @@ Example:
 		compatible = "marvell,armada-ap806-sdhci";
 		reg = <0xaa0000 0x1000>;
 		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>
-		clocks = <&emmc_clk>;
-		clock-names = "core";
+		clocks = <&emmc_clk>,<&axi_clk>;
+		clock-names = "core", "axi";
 		bus-width = <4>;
 		marvell,xenon-phy-slow-mode;
 		marvell,xenon-tun-count = <11>;
@@ -126,8 +128,8 @@ Example:
 		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>
 		vqmmc-supply = <&sd_vqmmc_regulator>;
 		vmmc-supply = <&sd_vmmc_regulator>;
-		clocks = <&sdclk>;
-		clock-names = "core";
+		clocks = <&sdclk>, <&axi_clk>;
+		clock-names = "core", "axi";
 		bus-width = <4>;
 		marvell,xenon-tun-count = <9>;
 	};
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index c580af05b033..6af4d77d5bc3 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -490,9 +490,20 @@ static int xenon_probe(struct platform_device *pdev)
 	if (err)
 		goto free_pltfm;
 
+	priv->axi_clk = devm_clk_get(&pdev->dev, "axi");
+	if (IS_ERR(priv->axi_clk)) {
+		err = PTR_ERR(priv->axi_clk);
+		if (err == -EPROBE_DEFER)
+			goto err_clk;
+	} else {
+		err = clk_prepare_enable(priv->axi_clk);
+		if (err)
+			goto err_clk;
+	}
+
 	err = mmc_of_parse(host->mmc);
 	if (err)
-		goto err_clk;
+		goto err_clk_axi;
 
 	sdhci_get_of_property(pdev);
 
@@ -501,11 +512,11 @@ static int xenon_probe(struct platform_device *pdev)
 	/* Xenon specific dt parse */
 	err = xenon_probe_dt(pdev);
 	if (err)
-		goto err_clk;
+		goto err_clk_axi;
 
 	err = xenon_sdhc_prepare(host);
 	if (err)
-		goto err_clk;
+		goto err_clk_axi;
 
 	err = sdhci_add_host(host);
 	if (err)
@@ -515,6 +526,8 @@ static int xenon_probe(struct platform_device *pdev)
 
 remove_sdhc:
 	xenon_sdhc_unprepare(host);
+err_clk_axi:
+	clk_disable_unprepare(priv->axi_clk);
 err_clk:
 	clk_disable_unprepare(pltfm_host->clk);
 free_pltfm:
@@ -526,11 +539,12 @@ static int xenon_remove(struct platform_device *pdev)
 {
 	struct sdhci_host *host = platform_get_drvdata(pdev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
 
 	sdhci_remove_host(host, 0);
 
 	xenon_sdhc_unprepare(host);
-
+	clk_disable_unprepare(priv->axi_clk);
 	clk_disable_unprepare(pltfm_host->clk);
 
 	sdhci_pltfm_free(pdev);
diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
index 73debb42dc2f..0ab4c224dc84 100644
--- a/drivers/mmc/host/sdhci-xenon.h
+++ b/drivers/mmc/host/sdhci-xenon.h
@@ -82,6 +82,7 @@ struct xenon_priv {
 	unsigned char	bus_width;
 	unsigned char	timing;
 	unsigned int	clock;
+	struct clk      *axi_clk;
 
 	int		phy_type;
 	/*
-- 
2.14.2

             reply	other threads:[~2017-10-12 16:14 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-12 16:13 Gregory CLEMENT [this message]
  -- strict thread matches above, loose matches on Subject: below --
2017-09-28 15:05 [PATCH] mmc: sdhci-xenon: Fix clock resource by adding an optional bus clock Gregory CLEMENT
2017-09-28 15:57 ` Gregory CLEMENT
2017-09-29  2:39 ` Jisheng Zhang
2017-09-29  9:13   ` Gregory CLEMENT
2017-09-29  9:15     ` Thomas Petazzoni
2017-09-29  9:22       ` Gregory CLEMENT
2017-09-30  2:47 ` Ziji Hu
2017-09-30  2:56   ` Jisheng Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171012161351.21852-1-gregory.clement@free-electrons.com \
    --to=gregory.clement@free-electrons.com \
    --cc=stable@vger.kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox