* Re: nouveau regression with 5.7 caused by "PCI/PM: Assume ports without DLL Link Active train links in 100 ms" [not found] ` <CACO55tuVJHjEbsW657ToczN++_iehXA8pimPAkzc=NOnx4Ztnw@mail.gmail.com> @ 2020-07-17 14:43 ` Sasha Levin 2020-07-17 22:59 ` Bjorn Helgaas 0 siblings, 1 reply; 2+ messages in thread From: Sasha Levin @ 2020-07-17 14:43 UTC (permalink / raw) To: Karol Herbst Cc: Bjorn Helgaas, Linux PCI, Mika Westerberg, Ben Skeggs, Bjorn Helgaas, Lyude Paul, nouveau, dri-devel, Patrick Volkerding, LKML, Kai-Heng Feng, stable On Fri, Jul 17, 2020 at 02:43:52AM +0200, Karol Herbst wrote: >On Fri, Jul 17, 2020 at 1:54 AM Bjorn Helgaas <helgaas@kernel.org> wrote: >> >> [+cc Sasha -- stable kernel regression] >> [+cc Patrick, Kai-Heng, LKML] >> >> On Fri, Jul 17, 2020 at 12:10:39AM +0200, Karol Herbst wrote: >> > On Tue, Jul 7, 2020 at 9:30 PM Karol Herbst <kherbst@redhat.com> wrote: >> > > >> > > Hi everybody, >> > > >> > > with the mentioned commit Nouveau isn't able to load firmware onto the >> > > GPU on one of my systems here. Even though the issue doesn't always >> > > happen I am quite confident this is the commit breaking it. >> > > >> > > I am still digging into the issue and trying to figure out what >> > > exactly breaks, but it shows up in different ways. Either we are not >> > > able to boot the engines on the GPU or the GPU becomes unresponsive. >> > > Btw, this is also a system where our runtime power management issue >> > > shows up, so maybe there is indeed something funky with the bridge >> > > controller. >> > > >> > > Just pinging you in case you have an idea on how this could break Nouveau >> > > >> > > most of the times it shows up like this: >> > > nouveau 0000:01:00.0: acr: AHESASC binary failed >> > > >> > > Sometimes it works at boot and fails at runtime resuming with random >> > > faults. So I will be investigating a bit more, but yeah... I am super >> > > sure the commit triggered this issue, no idea if it actually causes >> > > it. >> > >> > so yeah.. I reverted that locally and never ran into issues again. >> > Still valid on latest 5.7. So can we get this reverted or properly >> > fixed? This breaks runtime pm for us on at least some hardware. >> >> Yeah, that stinks. We had another similar report from Patrick: >> >> https://lore.kernel.org/r/CAErSpo5sTeK_my1dEhWp7aHD0xOp87+oHYWkTjbL7ALgDbXo-Q@mail.gmail.com >> >> Apparently the problem is ec411e02b7a2 ("PCI/PM: Assume ports without >> DLL Link Active train links in 100 ms"), which Patrick found was >> backported to v5.4.49 as 828b192c57e8, and you found was backported to >> v5.7.6 as afaff825e3a4. >> >> Oddly, Patrick reported that v5.7.7 worked correctly, even though it >> still contains afaff825e3a4. >> >> I guess in the absence of any other clues we'll have to revert it. >> I hate to do that because that means we'll have slow resume of >> Thunderbolt-connected devices again, but that's better than having >> GPUs completely broken. >> >> Could you and Patrick open bugzilla.kernel.org reports, attach dmesg >> logs and "sudo lspci -vv" output, and add the URLs to Kai-Heng's >> original report at https://bugzilla.kernel.org/show_bug.cgi?id=206837 >> and to this thread? >> >> There must be a way to fix the slow resume problem without breaking >> the GPUs. >> > >I wouldn't be surprised if this is related to the Intel bridge we >check against for Nouveau.. I still have to check on another laptop >with the same bridge our workaround was required as well but wouldn't >be surprised if it shows the same problem. Will get you the >information from both systems tomorrow then. I take it that ec411e02b7a2 will be reverted upstream? -- Thanks, Sasha ^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: nouveau regression with 5.7 caused by "PCI/PM: Assume ports without DLL Link Active train links in 100 ms" 2020-07-17 14:43 ` nouveau regression with 5.7 caused by "PCI/PM: Assume ports without DLL Link Active train links in 100 ms" Sasha Levin @ 2020-07-17 22:59 ` Bjorn Helgaas 0 siblings, 0 replies; 2+ messages in thread From: Bjorn Helgaas @ 2020-07-17 22:59 UTC (permalink / raw) To: Sasha Levin Cc: Karol Herbst, Linux PCI, Mika Westerberg, Ben Skeggs, Bjorn Helgaas, Lyude Paul, nouveau, dri-devel, Patrick Volkerding, LKML, Kai-Heng Feng, stable On Fri, Jul 17, 2020 at 10:43:18AM -0400, Sasha Levin wrote: > On Fri, Jul 17, 2020 at 02:43:52AM +0200, Karol Herbst wrote: > > On Fri, Jul 17, 2020 at 1:54 AM Bjorn Helgaas <helgaas@kernel.org> wrote: > > > On Fri, Jul 17, 2020 at 12:10:39AM +0200, Karol Herbst wrote: > > > > On Tue, Jul 7, 2020 at 9:30 PM Karol Herbst <kherbst@redhat.com> wrote: > > > > > > > > > > Hi everybody, > > > > > > > > > > with the mentioned commit Nouveau isn't able to load firmware onto the > > > > > GPU on one of my systems here. Even though the issue doesn't always > > > > > happen I am quite confident this is the commit breaking it. > > > > > > > > > > I am still digging into the issue and trying to figure out what > > > > > exactly breaks, but it shows up in different ways. Either we are not > > > > > able to boot the engines on the GPU or the GPU becomes unresponsive. > > > > > Btw, this is also a system where our runtime power management issue > > > > > shows up, so maybe there is indeed something funky with the bridge > > > > > controller. > > > > > > > > > > Just pinging you in case you have an idea on how this could break Nouveau > > > > > > > > > > most of the times it shows up like this: > > > > > nouveau 0000:01:00.0: acr: AHESASC binary failed > > > > > > > > > > Sometimes it works at boot and fails at runtime resuming with random > > > > > faults. So I will be investigating a bit more, but yeah... I am super > > > > > sure the commit triggered this issue, no idea if it actually causes > > > > > it. > > > > > > > > so yeah.. I reverted that locally and never ran into issues again. > > > > Still valid on latest 5.7. So can we get this reverted or properly > > > > fixed? This breaks runtime pm for us on at least some hardware. > > > > > > Yeah, that stinks. We had another similar report from Patrick: > > > > > > https://lore.kernel.org/r/CAErSpo5sTeK_my1dEhWp7aHD0xOp87+oHYWkTjbL7ALgDbXo-Q@mail.gmail.com > > > > > > Apparently the problem is ec411e02b7a2 ("PCI/PM: Assume ports without > > > DLL Link Active train links in 100 ms"), which Patrick found was > > > backported to v5.4.49 as 828b192c57e8, and you found was backported to > > > v5.7.6 as afaff825e3a4. > > > > > > Oddly, Patrick reported that v5.7.7 worked correctly, even though it > > > still contains afaff825e3a4. > > > > > > I guess in the absence of any other clues we'll have to revert it. > > > I hate to do that because that means we'll have slow resume of > > > Thunderbolt-connected devices again, but that's better than having > > > GPUs completely broken. > > > > > > Could you and Patrick open bugzilla.kernel.org reports, attach dmesg > > > logs and "sudo lspci -vv" output, and add the URLs to Kai-Heng's > > > original report at https://bugzilla.kernel.org/show_bug.cgi?id=206837 > > > and to this thread? > > > > > > There must be a way to fix the slow resume problem without breaking > > > the GPUs. > > > > > > > I wouldn't be surprised if this is related to the Intel bridge we > > check against for Nouveau.. I still have to check on another laptop > > with the same bridge our workaround was required as well but wouldn't > > be surprised if it shows the same problem. Will get you the > > information from both systems tomorrow then. > > I take it that ec411e02b7a2 will be reverted upstream? Yes, unless we have a better fix soon. I applied the revert to my for-linus branch, so it will appear in -next soon. I think it's a little late to get it in -rc5, so I'll probably ask Linus to pull it next week for -rc6. Bjorn ^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-07-17 22:59 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <CACO55tuA+XMgv=GREf178NzTLTHri4kyD5mJjKuDpKxExauvVg@mail.gmail.com>
[not found] ` <20200716235440.GA675421@bjorn-Precision-5520>
[not found] ` <CACO55tuVJHjEbsW657ToczN++_iehXA8pimPAkzc=NOnx4Ztnw@mail.gmail.com>
2020-07-17 14:43 ` nouveau regression with 5.7 caused by "PCI/PM: Assume ports without DLL Link Active train links in 100 ms" Sasha Levin
2020-07-17 22:59 ` Bjorn Helgaas
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox