[PATCH v2 1/3] ath10k: fix division by zero in send path

[PATCH v2 1/3] ath10k: fix division by zero in send path

[Johan Hovold]

Add the missing endpoint max-packet sanity check to probe() to avoid
division by zero in ath10k_usb_hif_tx_sg() in case a malicious device
has broken descriptors (or when doing descriptor fuzz testing).

Note that USB core will reject URBs submitted for endpoints with zero
wMaxPacketSize but that drivers doing packet-size calculations still
need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip
endpoint descriptors with maxpacket=0")).

Fixes: 4db66499df91 ("ath10k: add initial USB support")
Cc: stable@vger.kernel.org      # 4.14
Cc: Erik Stromdahl <erik.stromdahl@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/net/wireless/ath/ath10k/usb.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/usb.c b/drivers/net/wireless/ath/ath10k/usb.c
index 6d831b098cbb..3d98f19c6ec8 100644
--- a/drivers/net/wireless/ath/ath10k/usb.c
+++ b/drivers/net/wireless/ath/ath10k/usb.c
@@ -853,6 +853,11 @@ static int ath10k_usb_setup_pipe_resources(struct ath10k *ar,
 				   le16_to_cpu(endpoint->wMaxPacketSize),
 				   endpoint->bInterval);
 		}
+
+		/* Ignore broken descriptors. */
+		if (usb_endpoint_maxp(endpoint) == 0)
+			continue;
+
 		urbcount = 0;
 
 		pipe_num =
-- 
2.32.0

Re: [PATCH v2 1/3] ath10k: fix division by zero in send path

[Kalle Valo]

Johan Hovold <johan@kernel.org> wrote:

> Add the missing endpoint max-packet sanity check to probe() to avoid
> division by zero in ath10k_usb_hif_tx_sg() in case a malicious device
> has broken descriptors (or when doing descriptor fuzz testing).
> 
> Note that USB core will reject URBs submitted for endpoints with zero
> wMaxPacketSize but that drivers doing packet-size calculations still
> need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip
> endpoint descriptors with maxpacket=0")).
> 
> Fixes: 4db66499df91 ("ath10k: add initial USB support")
> Cc: stable@vger.kernel.org      # 4.14
> Cc: Erik Stromdahl <erik.stromdahl@gmail.com>
> Signed-off-by: Johan Hovold <johan@kernel.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

2 patches applied to ath-next branch of ath.git, thanks.

a006acb93131 ath10k: fix division by zero in send path
c1b9ca365dea ath6kl: fix division by zero in send path

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20211027080819.6675-2-johan@kernel.org/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

[PATCH v2 2/3] ath6kl: fix division by zero in send path

[Johan Hovold]

Add the missing endpoint max-packet sanity check to probe() to avoid
division by zero in ath10k_usb_hif_tx_sg() in case a malicious device
has broken descriptors (or when doing descriptor fuzz testing).

Note that USB core will reject URBs submitted for endpoints with zero
wMaxPacketSize but that drivers doing packet-size calculations still
need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip
endpoint descriptors with maxpacket=0")).

Fixes: 9cbee358687e ("ath6kl: add full USB support")
Cc: stable@vger.kernel.org      # 3.5
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/net/wireless/ath/ath6kl/usb.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/ath/ath6kl/usb.c b/drivers/net/wireless/ath/ath6kl/usb.c
index bd367b79a4d3..aba70f35e574 100644
--- a/drivers/net/wireless/ath/ath6kl/usb.c
+++ b/drivers/net/wireless/ath/ath6kl/usb.c
@@ -340,6 +340,11 @@ static int ath6kl_usb_setup_pipe_resources(struct ath6kl_usb *ar_usb)
 				   le16_to_cpu(endpoint->wMaxPacketSize),
 				   endpoint->bInterval);
 		}
+
+		/* Ignore broken descriptors. */
+		if (usb_endpoint_maxp(endpoint) == 0)
+			continue;
+
 		urbcount = 0;
 
 		pipe_num =
-- 
2.32.0

[PATCH v2 3/3] mwifiex: fix division by zero in fw download path

[Johan Hovold]

Add the missing endpoint sanity checks to probe() to avoid division by
zero in mwifiex_write_data_sync() in case a malicious device has broken
descriptors (or when doing descriptor fuzz testing).

Only add checks for the firmware-download boot stage, which require both
command endpoints, for now. The driver looks like it will handle a
missing endpoint during normal operation without oopsing, albeit not
very gracefully as it will try to submit URBs to the default pipe and
fail.

Note that USB core will reject URBs submitted for endpoints with zero
wMaxPacketSize but that drivers doing packet-size calculations still
need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip
endpoint descriptors with maxpacket=0")).

Fixes: 4daffe354366 ("mwifiex: add support for Marvell USB8797 chipset")
Cc: stable@vger.kernel.org      # 3.5
Cc: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/usb.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/usb.c b/drivers/net/wireless/marvell/mwifiex/usb.c
index 426e39d4ccf0..9736aa0ab7fd 100644
--- a/drivers/net/wireless/marvell/mwifiex/usb.c
+++ b/drivers/net/wireless/marvell/mwifiex/usb.c
@@ -505,6 +505,22 @@ static int mwifiex_usb_probe(struct usb_interface *intf,
 		}
 	}
 
+	switch (card->usb_boot_state) {
+	case USB8XXX_FW_DNLD:
+		/* Reject broken descriptors. */
+		if (!card->rx_cmd_ep || !card->tx_cmd_ep)
+			return -ENODEV;
+		if (card->bulk_out_maxpktsize == 0)
+			return -ENODEV;
+		break;
+	case USB8XXX_FW_READY:
+		/* Assume the driver can handle missing endpoints for now. */
+		break;
+	default:
+		WARN_ON(1);
+		return -ENODEV;
+	}
+
 	usb_set_intfdata(intf, card);
 
 	ret = mwifiex_add_card(card, &card->fw_done, &usb_ops,
-- 
2.32.0

Re: [PATCH v2 3/3] mwifiex: fix division by zero in fw download path

[Brian Norris]

On Wed, Oct 27, 2021 at 1:12 AM Johan Hovold <johan@kernel.org> wrote:
> --- a/drivers/net/wireless/marvell/mwifiex/usb.c
> +++ b/drivers/net/wireless/marvell/mwifiex/usb.c
> @@ -505,6 +505,22 @@ static int mwifiex_usb_probe(struct usb_interface *intf,
>                 }
>         }
>
> +       switch (card->usb_boot_state) {
> +       case USB8XXX_FW_DNLD:
> +               /* Reject broken descriptors. */
> +               if (!card->rx_cmd_ep || !card->tx_cmd_ep)
> +                       return -ENODEV;

^^ These two conditions are applicable to USB8XXX_FW_READY too, right?

> +               if (card->bulk_out_maxpktsize == 0)
> +                       return -ENODEV;
> +               break;
> +       case USB8XXX_FW_READY:
> +               /* Assume the driver can handle missing endpoints for now. */
> +               break;
> +       default:
> +               WARN_ON(1);
> +               return -ENODEV;
> +       }
> +

Anyway, looks pretty good, thanks:

Reviewed-by: Brian Norris <briannorris@chromium.org>

Re: [PATCH v2 3/3] mwifiex: fix division by zero in fw download path

[Johan Hovold]

On Wed, Oct 27, 2021 at 11:22:39AM -0700, Brian Norris wrote:
> On Wed, Oct 27, 2021 at 1:12 AM Johan Hovold <johan@kernel.org> wrote:
> > --- a/drivers/net/wireless/marvell/mwifiex/usb.c
> > +++ b/drivers/net/wireless/marvell/mwifiex/usb.c
> > @@ -505,6 +505,22 @@ static int mwifiex_usb_probe(struct usb_interface *intf,
> >                 }
> >         }
> >
> > +       switch (card->usb_boot_state) {
> > +       case USB8XXX_FW_DNLD:
> > +               /* Reject broken descriptors. */
> > +               if (!card->rx_cmd_ep || !card->tx_cmd_ep)
> > +                       return -ENODEV;
> 
> ^^ These two conditions are applicable to USB8XXX_FW_READY too, right?

Right, but I didn't want to add an incomplete set of constraints.

I couldn't find any documentation (e.g. lsusb -v) for what the
descriptors are supposed to look like, but judging from the code,
something like

	if (!card->rx_cmd_ep || !card->tx_cmd_ep)
		return -ENODEV;
	if (!card->rx_data_ep || !card->port[0].tx_data_ep)
		return -ENODEV;

should do. But I'm not sure about the second tx endpoint,
card->port[1].tx_data_ep, for which support was added later and which
the driver appears to be able to manage without.

Either way it has nothing to do with the division-by-zero and should be
added separately.

> > +               if (card->bulk_out_maxpktsize == 0)
> > +                       return -ENODEV;
> > +               break;
> > +       case USB8XXX_FW_READY:
> > +               /* Assume the driver can handle missing endpoints for now. */
> > +               break;
> > +       default:
> > +               WARN_ON(1);
> > +               return -ENODEV;
> > +       }

Johan

Re: [PATCH v2 3/3] mwifiex: fix division by zero in fw download path

[Kalle Valo]

Johan Hovold <johan@kernel.org> wrote:

> Add the missing endpoint sanity checks to probe() to avoid division by
> zero in mwifiex_write_data_sync() in case a malicious device has broken
> descriptors (or when doing descriptor fuzz testing).
> 
> Only add checks for the firmware-download boot stage, which require both
> command endpoints, for now. The driver looks like it will handle a
> missing endpoint during normal operation without oopsing, albeit not
> very gracefully as it will try to submit URBs to the default pipe and
> fail.
> 
> Note that USB core will reject URBs submitted for endpoints with zero
> wMaxPacketSize but that drivers doing packet-size calculations still
> need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip
> endpoint descriptors with maxpacket=0")).
> 
> Fixes: 4daffe354366 ("mwifiex: add support for Marvell USB8797 chipset")
> Cc: stable@vger.kernel.org      # 3.5
> Cc: Amitkumar Karwar <akarwar@marvell.com>
> Signed-off-by: Johan Hovold <johan@kernel.org>
> Reviewed-by: Brian Norris <briannorris@chromium.org>

Patch applied to wireless-drivers-next.git, thanks.

89f8765a11d8 mwifiex: fix division by zero in fw download path

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20211027080819.6675-4-johan@kernel.org/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches