Re: [PATCH v3 2/2] usb: dwc3: core: defer probe on ulpi_read_id timeout

[Thinh Nguyen <Thinh.Nguyen@synopsys.com>]

On Thu, Nov 17, 2022, Ferry Toth wrote:
> Since commit 0f010171

I don't your update as noted in the v3 change (ie. Greg's suggestions).

> Dual Role support on Intel Merrifield platform broke due to rearranging
> the call to dwc3_get_extcon().
> 
> It appears to be caused by ulpi_read_id() masking the timeout on the first
> test write. In the past dwc3 probe continued by calling dwc3_core_soft_reset()
> followed by dwc3_get_extcon() which happend to return -EPROBE_DEFER.
> On deferred probe ulpi_read_id() finally succeeded.
> 
> As we now changed ulpi_read_id() to return -ETIMEDOUT in this case, we
> need to handle the error by calling dwc3_core_soft_reset() and request
> -EPROBE_DEFER. On deferred probe ulpi_read_id() is retried and succeeds.
> 
> Signed-off-by: Ferry Toth <ftoth@exalondelft.nl>
> ---
>  drivers/usb/dwc3/core.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 648f1c570021..2779f17bffaf 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -1106,8 +1106,13 @@ static int dwc3_core_init(struct dwc3 *dwc)
>  
>  	if (!dwc->ulpi_ready) {
>  		ret = dwc3_core_ulpi_init(dwc);
> -		if (ret)
> +		if (ret) {
> +			if (ret == -ETIMEDOUT) {
> +				dwc3_core_soft_reset(dwc);

I'm not sure if you saw my previous response. I wanted to check to see
if we need to do soft-reset once before ulpi init as part of its
initialization.

I'm just curious why Andrey Smirnov test doesn't require this change. If
it's a quirk for this specific configuration, then the change here is
fine. If it's required for all ULPI setup, then we can unconditionally
do that for all ULPI setup during initialization.

> +				ret = -EPROBE_DEFER;
> +			}
>  			goto err0;
> +		}
>  		dwc->ulpi_ready = true;
>  	}
>  
> -- 
> 2.37.2
> 

Thanks,
Thinh