[PATCH AUTOSEL 6.3 01/59] wifi: ath: Silence memcpy run-time false positive warning

[PATCH AUTOSEL 6.3 01/59] wifi: ath: Silence memcpy run-time false positive warning

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit bfcc8ba45eb87bfaaff900bbad2b87b204899d41 ]

The memcpy() in ath_key_config() was attempting to write across
neighboring struct members in struct ath_keyval. Introduce a wrapping
struct_group, kv_values, to be the addressable target of the memcpy
without overflowing an individual member. Silences the false positive
run-time warning:

  memcpy: detected field-spanning write (size 32) of single field "hk.kv_val" at drivers/net/wireless/ath/key.c:506 (size 16)

Link: https://bbs.archlinux.org/viewtopic.php?id=282254
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230210054310.never.554-kees@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath.h | 12 +++++++-----
 drivers/net/wireless/ath/key.c |  2 +-
 2 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index f083fb9038c36..f02a308a9ffc5 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -96,11 +96,13 @@ struct ath_keyval {
 	u8 kv_type;
 	u8 kv_pad;
 	u16 kv_len;
-	u8 kv_val[16]; /* TK */
-	u8 kv_mic[8]; /* Michael MIC key */
-	u8 kv_txmic[8]; /* Michael MIC TX key (used only if the hardware
-			 * supports both MIC keys in the same key cache entry;
-			 * in that case, kv_mic is the RX key) */
+	struct_group(kv_values,
+		u8 kv_val[16]; /* TK */
+		u8 kv_mic[8]; /* Michael MIC key */
+		u8 kv_txmic[8]; /* Michael MIC TX key (used only if the hardware
+				 * supports both MIC keys in the same key cache entry;
+				 * in that case, kv_mic is the RX key) */
+	);
 };
 
 enum ath_cipher {
diff --git a/drivers/net/wireless/ath/key.c b/drivers/net/wireless/ath/key.c
index 61b59a804e308..b7b61d4f02bae 100644
--- a/drivers/net/wireless/ath/key.c
+++ b/drivers/net/wireless/ath/key.c
@@ -503,7 +503,7 @@ int ath_key_config(struct ath_common *common,
 
 	hk.kv_len = key->keylen;
 	if (key->keylen)
-		memcpy(hk.kv_val, key->key, key->keylen);
+		memcpy(&hk.kv_values, key->key, key->keylen);
 
 	if (!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
 		switch (vif->type) {
-- 
2.39.2

[PATCH AUTOSEL 6.3 02/59] wifi: ath12k: Handle lock during peer_id find

[Sasha Levin]

From: Ramya Gnanasekar <quic_rgnanase@quicinc.com>

[ Upstream commit 95a389e2ff3212d866cc51c77d682d2934074eb8 ]

ath12k_peer_find_by_id() requires that the caller hold the
ab->base_lock. Currently the WBM error path does not hold
the lock and calling that function, leads to the
following lockdep_assert()in QCN9274:

[105162.160893] ------------[ cut here ]------------
[105162.160916] WARNING: CPU: 3 PID: 0 at drivers/net/wireless/ath/ath12k/peer.c:71 ath12k_peer_find_by_id+0x52/0x60 [ath12k]
[105162.160933] Modules linked in: ath12k(O) qrtr_mhi qrtr mac80211 cfg80211 mhi qmi_helpers libarc4 nvme nvme_core [last unloaded: ath12k(O)]
[105162.160967] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G        W  O       6.1.0-rc2+ #3
[105162.160972] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0056.2019.0506.1527 05/06/2019
[105162.160977] RIP: 0010:ath12k_peer_find_by_id+0x52/0x60 [ath12k]
[105162.160990] Code: 07 eb 0f 39 68 24 74 0a 48 8b 00 48 39 f8 75 f3 31 c0 5b 5d c3 48 8d bf b0 f2 00 00 be ff ff ff ff e8 22 20 c4 e2 85 c0 75 bf <0f> 0b eb bb 66 2e 0f 1f 84 00 00 00 00 00 41 54 4c 8d a7 98 f2 00
[105162.160996] RSP: 0018:ffffa223001acc60 EFLAGS: 00010246
[105162.161003] RAX: 0000000000000000 RBX: ffff9f0573940000 RCX: 0000000000000000
[105162.161008] RDX: 0000000000000001 RSI: ffffffffa3951c8e RDI: ffffffffa39a96d7
[105162.161013] RBP: 000000000000000a R08: 0000000000000000 R09: 0000000000000000
[105162.161017] R10: ffffa223001acb40 R11: ffffffffa3d57c60 R12: ffff9f057394f2e0
[105162.161022] R13: ffff9f0573940000 R14: ffff9f04ecd659c0 R15: ffff9f04d5a9b040
[105162.161026] FS:  0000000000000000(0000) GS:ffff9f0575600000(0000) knlGS:0000000000000000
[105162.161031] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[105162.161036] CR2: 00001d5c8277a008 CR3: 00000001e6224006 CR4: 00000000003706e0
[105162.161041] Call Trace:
[105162.161046]  <IRQ>
[105162.161051]  ath12k_dp_rx_process_wbm_err+0x6da/0xaf0 [ath12k]
[105162.161072]  ? ath12k_dp_rx_process_err+0x80e/0x15a0 [ath12k]
[105162.161084]  ? __lock_acquire+0x4ca/0x1a60
[105162.161104]  ath12k_dp_service_srng+0x263/0x310 [ath12k]
[105162.161120]  ath12k_pci_ext_grp_napi_poll+0x1c/0x70 [ath12k]
[105162.161133]  __napi_poll+0x22/0x260
[105162.161141]  net_rx_action+0x2f8/0x380
[105162.161153]  __do_softirq+0xd0/0x4c9
[105162.161162]  irq_exit_rcu+0x88/0xe0
[105162.161169]  common_interrupt+0xa5/0xc0
[105162.161174]  </IRQ>
[105162.161179]  <TASK>
[105162.161184]  asm_common_interrupt+0x22/0x40

Handle spin lock/unlock in WBM error path to hold the necessary lock
expected by ath12k_peer_find_by_id().

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0-03171-QCAHKSWPL_SILICONZ-1

Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230122014936.3594-1-quic_rgnanase@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath12k/dp_rx.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/ath12k/dp_rx.c b/drivers/net/wireless/ath/ath12k/dp_rx.c
index 83a43ad48c512..de9a4ca66c664 100644
--- a/drivers/net/wireless/ath/ath12k/dp_rx.c
+++ b/drivers/net/wireless/ath/ath12k/dp_rx.c
@@ -3494,11 +3494,14 @@ static int ath12k_dp_rx_h_null_q_desc(struct ath12k *ar, struct sk_buff *msdu,
 	msdu_len = ath12k_dp_rx_h_msdu_len(ab, desc);
 	peer_id = ath12k_dp_rx_h_peer_id(ab, desc);
 
+	spin_lock(&ab->base_lock);
 	if (!ath12k_peer_find_by_id(ab, peer_id)) {
+		spin_unlock(&ab->base_lock);
 		ath12k_dbg(ab, ATH12K_DBG_DATA, "invalid peer id received in wbm err pkt%d\n",
 			   peer_id);
 		return -EINVAL;
 	}
+	spin_unlock(&ab->base_lock);
 
 	if (!rxcb->is_frag && ((msdu_len + hal_rx_desc_sz) > DP_RX_BUFFER_SIZE)) {
 		/* First buffer will be freed by the caller, so deduct it's length */
-- 
2.39.2

[PATCH AUTOSEL 6.3 03/59] wifi: ath12k: PCI ops for wakeup/release MHI

[Sasha Levin]

From: Ramya Gnanasekar <quic_rgnanase@quicinc.com>

[ Upstream commit 80e396586d0a94c42015dd9472176d89a3b0e4ca ]

Wakeup/release MHI is not needed before pci_read/write for QCN9274.
Since wakeup & release MHI is enabled for all QCN9274 and
WCN7850, below MHI assert is seen in QCN9274

[  784.906613] BUG: sleeping function called from invalid context at drivers/bus/mhi/host/pm.c:989
[  784.906633] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/3
[  784.906637] preempt_count: 503, expected: 0
[  784.906641] RCU nest depth: 0, expected: 0
[  784.906644] 2 locks held by swapper/3/0:
[  784.906646]  #0: ffff8ed348e429e0 (&ab->ce.ce_lock){+.-.}-{2:2}, at: ath12k_ce_recv_process_cb+0xb3/0x2f0 [ath12k]
[  784.906664]  #1: ffff8ed348e491f0 (&srng->lock_key#3){+.-.}-{2:2}, at: ath12k_ce_recv_process_cb+0xfb/0x2f0 [ath12k]
[  784.906678] Preemption disabled at:
[  784.906680] [<0000000000000000>] 0x0
[  784.906686] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G        W  O       6.1.0-rc2+ #3
[  784.906688] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0056.2019.0506.1527 05/06/2019
[  784.906690] Call Trace:
[  784.906691]  <IRQ>
[  784.906693]  dump_stack_lvl+0x56/0x7b
[  784.906698]  __might_resched+0x21c/0x270
[  784.906704]  __mhi_device_get_sync+0x7d/0x1c0 [mhi]
[  784.906714]  mhi_device_get_sync+0xd/0x20 [mhi]
[  784.906719]  ath12k_pci_write32+0x75/0x170 [ath12k]
[  784.906729]  ath12k_hal_srng_access_end+0x55/0xc0 [ath12k]
[  784.906737]  ath12k_ce_recv_process_cb+0x1f3/0x2f0 [ath12k]
[  784.906776]  ? ath12k_pci_ce_tasklet+0x11/0x30 [ath12k]
[  784.906788]  ath12k_pci_ce_tasklet+0x11/0x30 [ath12k]
[  784.906813]  tasklet_action_common.isra.18+0xb7/0xe0
[  784.906820]  __do_softirq+0xd0/0x4c9
[  784.906826]  irq_exit_rcu+0x88/0xe0
[  784.906828]  common_interrupt+0xa5/0xc0
[  784.906831]  </IRQ>
[  784.906832]  <TASK>

Adding function callbacks for MHI wakeup and release operations.
QCN9274 does not need wakeup/release, function callbacks are initialized
to NULL. In case of WCN7850, shadow registers are used to access rings.
Since, shadow register's offset is less than ACCESS_ALWAYS_OFF,
mhi_device_get_sync() or mhi_device_put() to wakeup
and release mhi will not be called during service ring accesses.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0-03171-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230123095141.5310-1-quic_rgnanase@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath12k/pci.c | 47 ++++++++++++++++++++++-----
 drivers/net/wireless/ath/ath12k/pci.h |  6 ++++
 2 files changed, 44 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/pci.c b/drivers/net/wireless/ath/ath12k/pci.c
index ae7f6083c9fc2..d32637b0113db 100644
--- a/drivers/net/wireless/ath/ath12k/pci.c
+++ b/drivers/net/wireless/ath/ath12k/pci.c
@@ -119,6 +119,30 @@ static const char *irq_name[ATH12K_IRQ_NUM_MAX] = {
 	"tcl2host-status-ring",
 };
 
+static int ath12k_pci_bus_wake_up(struct ath12k_base *ab)
+{
+	struct ath12k_pci *ab_pci = ath12k_pci_priv(ab);
+
+	return mhi_device_get_sync(ab_pci->mhi_ctrl->mhi_dev);
+}
+
+static void ath12k_pci_bus_release(struct ath12k_base *ab)
+{
+	struct ath12k_pci *ab_pci = ath12k_pci_priv(ab);
+
+	mhi_device_put(ab_pci->mhi_ctrl->mhi_dev);
+}
+
+static const struct ath12k_pci_ops ath12k_pci_ops_qcn9274 = {
+	.wakeup = NULL,
+	.release = NULL,
+};
+
+static const struct ath12k_pci_ops ath12k_pci_ops_wcn7850 = {
+	.wakeup = ath12k_pci_bus_wake_up,
+	.release = ath12k_pci_bus_release,
+};
+
 static void ath12k_pci_select_window(struct ath12k_pci *ab_pci, u32 offset)
 {
 	struct ath12k_base *ab = ab_pci->ab;
@@ -989,13 +1013,14 @@ u32 ath12k_pci_read32(struct ath12k_base *ab, u32 offset)
 {
 	struct ath12k_pci *ab_pci = ath12k_pci_priv(ab);
 	u32 val, window_start;
+	int ret = 0;
 
 	/* for offset beyond BAR + 4K - 32, may
 	 * need to wakeup MHI to access.
 	 */
 	if (test_bit(ATH12K_PCI_FLAG_INIT_DONE, &ab_pci->flags) &&
-	    offset >= ACCESS_ALWAYS_OFF)
-		mhi_device_get_sync(ab_pci->mhi_ctrl->mhi_dev);
+	    offset >= ACCESS_ALWAYS_OFF && ab_pci->pci_ops->wakeup)
+		ret = ab_pci->pci_ops->wakeup(ab);
 
 	if (offset < WINDOW_START) {
 		val = ioread32(ab->mem + offset);
@@ -1023,9 +1048,9 @@ u32 ath12k_pci_read32(struct ath12k_base *ab, u32 offset)
 	}
 
 	if (test_bit(ATH12K_PCI_FLAG_INIT_DONE, &ab_pci->flags) &&
-	    offset >= ACCESS_ALWAYS_OFF)
-		mhi_device_put(ab_pci->mhi_ctrl->mhi_dev);
-
+	    offset >= ACCESS_ALWAYS_OFF && ab_pci->pci_ops->release &&
+	    !ret)
+		ab_pci->pci_ops->release(ab);
 	return val;
 }
 
@@ -1033,13 +1058,14 @@ void ath12k_pci_write32(struct ath12k_base *ab, u32 offset, u32 value)
 {
 	struct ath12k_pci *ab_pci = ath12k_pci_priv(ab);
 	u32 window_start;
+	int ret = 0;
 
 	/* for offset beyond BAR + 4K - 32, may
 	 * need to wakeup MHI to access.
 	 */
 	if (test_bit(ATH12K_PCI_FLAG_INIT_DONE, &ab_pci->flags) &&
-	    offset >= ACCESS_ALWAYS_OFF)
-		mhi_device_get_sync(ab_pci->mhi_ctrl->mhi_dev);
+	    offset >= ACCESS_ALWAYS_OFF && ab_pci->pci_ops->wakeup)
+		ret = ab_pci->pci_ops->wakeup(ab);
 
 	if (offset < WINDOW_START) {
 		iowrite32(value, ab->mem + offset);
@@ -1067,8 +1093,9 @@ void ath12k_pci_write32(struct ath12k_base *ab, u32 offset, u32 value)
 	}
 
 	if (test_bit(ATH12K_PCI_FLAG_INIT_DONE, &ab_pci->flags) &&
-	    offset >= ACCESS_ALWAYS_OFF)
-		mhi_device_put(ab_pci->mhi_ctrl->mhi_dev);
+	    offset >= ACCESS_ALWAYS_OFF && ab_pci->pci_ops->release &&
+	    !ret)
+		ab_pci->pci_ops->release(ab);
 }
 
 int ath12k_pci_power_up(struct ath12k_base *ab)
@@ -1182,6 +1209,7 @@ static int ath12k_pci_probe(struct pci_dev *pdev,
 	case QCN9274_DEVICE_ID:
 		ab_pci->msi_config = &ath12k_msi_config[0];
 		ab->static_window_map = true;
+		ab_pci->pci_ops = &ath12k_pci_ops_qcn9274;
 		ath12k_pci_read_hw_version(ab, &soc_hw_version_major,
 					   &soc_hw_version_minor);
 		switch (soc_hw_version_major) {
@@ -1202,6 +1230,7 @@ static int ath12k_pci_probe(struct pci_dev *pdev,
 		ab_pci->msi_config = &ath12k_msi_config[0];
 		ab->static_window_map = false;
 		ab->hw_rev = ATH12K_HW_WCN7850_HW20;
+		ab_pci->pci_ops = &ath12k_pci_ops_wcn7850;
 		break;
 
 	default:
diff --git a/drivers/net/wireless/ath/ath12k/pci.h b/drivers/net/wireless/ath/ath12k/pci.h
index 0d9e40ab31f26..0f24fd9395cd9 100644
--- a/drivers/net/wireless/ath/ath12k/pci.h
+++ b/drivers/net/wireless/ath/ath12k/pci.h
@@ -86,6 +86,11 @@ enum ath12k_pci_flags {
 	ATH12K_PCI_ASPM_RESTORE,
 };
 
+struct ath12k_pci_ops {
+	int (*wakeup)(struct ath12k_base *ab);
+	void (*release)(struct ath12k_base *ab);
+};
+
 struct ath12k_pci {
 	struct pci_dev *pdev;
 	struct ath12k_base *ab;
@@ -103,6 +108,7 @@ struct ath12k_pci {
 	/* enum ath12k_pci_flags */
 	unsigned long flags;
 	u16 link_ctl;
+	const struct ath12k_pci_ops *pci_ops;
 };
 
 static inline struct ath12k_pci *ath12k_pci_priv(struct ath12k_base *ab)
-- 
2.39.2

[PATCH AUTOSEL 6.3 04/59] bpf: Annotate data races in bpf_local_storage

[Sasha Levin]

From: Kumar Kartikeya Dwivedi <memxor@gmail.com>

[ Upstream commit 0a09a2f933c73dc76ab0b72da6855f44342a8903 ]

There are a few cases where hlist_node is checked to be unhashed without
holding the lock protecting its modification. In this case, one must use
hlist_unhashed_lockless to avoid load tearing and KCSAN reports. Fix
this by using lockless variant in places not protected by the lock.

Since this is not prompted by any actual KCSAN reports but only from
code review, I have not included a fixes tag.

Cc: Martin KaFai Lau <martin.lau@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230221200646.2500777-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/bpf_local_storage.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/kernel/bpf/bpf_local_storage.c b/kernel/bpf/bpf_local_storage.c
index 35f4138a54dc1..58da17ae51241 100644
--- a/kernel/bpf/bpf_local_storage.c
+++ b/kernel/bpf/bpf_local_storage.c
@@ -51,11 +51,21 @@ owner_storage(struct bpf_local_storage_map *smap, void *owner)
 	return map->ops->map_owner_storage_ptr(owner);
 }
 
+static bool selem_linked_to_storage_lockless(const struct bpf_local_storage_elem *selem)
+{
+	return !hlist_unhashed_lockless(&selem->snode);
+}
+
 static bool selem_linked_to_storage(const struct bpf_local_storage_elem *selem)
 {
 	return !hlist_unhashed(&selem->snode);
 }
 
+static bool selem_linked_to_map_lockless(const struct bpf_local_storage_elem *selem)
+{
+	return !hlist_unhashed_lockless(&selem->map_node);
+}
+
 static bool selem_linked_to_map(const struct bpf_local_storage_elem *selem)
 {
 	return !hlist_unhashed(&selem->map_node);
@@ -174,7 +184,7 @@ static void __bpf_selem_unlink_storage(struct bpf_local_storage_elem *selem,
 	bool free_local_storage = false;
 	unsigned long flags;
 
-	if (unlikely(!selem_linked_to_storage(selem)))
+	if (unlikely(!selem_linked_to_storage_lockless(selem)))
 		/* selem has already been unlinked from sk */
 		return;
 
@@ -208,7 +218,7 @@ void bpf_selem_unlink_map(struct bpf_local_storage_elem *selem)
 	struct bpf_local_storage_map_bucket *b;
 	unsigned long flags;
 
-	if (unlikely(!selem_linked_to_map(selem)))
+	if (unlikely(!selem_linked_to_map_lockless(selem)))
 		/* selem has already be unlinked from smap */
 		return;
 
@@ -420,7 +430,7 @@ bpf_local_storage_update(void *owner, struct bpf_local_storage_map *smap,
 		err = check_flags(old_sdata, map_flags);
 		if (err)
 			return ERR_PTR(err);
-		if (old_sdata && selem_linked_to_storage(SELEM(old_sdata))) {
+		if (old_sdata && selem_linked_to_storage_lockless(SELEM(old_sdata))) {
 			copy_map_value_locked(&smap->map, old_sdata->data,
 					      value, false);
 			return old_sdata;
-- 
2.39.2

[PATCH AUTOSEL 6.3 05/59] wifi: brcmfmac: pcie: Provide a buffer of random bytes to the device

[Sasha Levin]

From: Hector Martin <marcan@marcan.st>

[ Upstream commit 91918ce88d9fef408bb12c46a27c73d79b604c20 ]

Newer Apple firmwares on chipsets without a hardware RNG require the
host to provide a buffer of 256 random bytes to the device on
initialization. This buffer is present immediately before NVRAM,
suffixed by a footer containing a magic number and the buffer length.

This won't affect chips/firmwares that do not use this feature, so do it
unconditionally for all Apple platforms (those with an Apple OTP).

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230214080034.3828-3-marcan@marcan.st
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../broadcom/brcm80211/brcmfmac/pcie.c        | 32 +++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index a9b9b2dc62d4f..2835ef4edb18f 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -15,6 +15,7 @@
 #include <linux/sched/signal.h>
 #include <linux/kthread.h>
 #include <linux/io.h>
+#include <linux/random.h>
 #include <asm/unaligned.h>
 
 #include <soc.h>
@@ -1653,6 +1654,13 @@ brcmf_pcie_init_share_ram_info(struct brcmf_pciedev_info *devinfo,
 	return 0;
 }
 
+struct brcmf_random_seed_footer {
+	__le32 length;
+	__le32 magic;
+};
+
+#define BRCMF_RANDOM_SEED_MAGIC		0xfeedc0de
+#define BRCMF_RANDOM_SEED_LENGTH	0x100
 
 static int brcmf_pcie_download_fw_nvram(struct brcmf_pciedev_info *devinfo,
 					const struct firmware *fw, void *nvram,
@@ -1689,6 +1697,30 @@ static int brcmf_pcie_download_fw_nvram(struct brcmf_pciedev_info *devinfo,
 			  nvram_len;
 		memcpy_toio(devinfo->tcm + address, nvram, nvram_len);
 		brcmf_fw_nvram_free(nvram);
+
+		if (devinfo->otp.valid) {
+			size_t rand_len = BRCMF_RANDOM_SEED_LENGTH;
+			struct brcmf_random_seed_footer footer = {
+				.length = cpu_to_le32(rand_len),
+				.magic = cpu_to_le32(BRCMF_RANDOM_SEED_MAGIC),
+			};
+			void *randbuf;
+
+			/* Some Apple chips/firmwares expect a buffer of random
+			 * data to be present before NVRAM
+			 */
+			brcmf_dbg(PCIE, "Download random seed\n");
+
+			address -= sizeof(footer);
+			memcpy_toio(devinfo->tcm + address, &footer,
+				    sizeof(footer));
+
+			address -= rand_len;
+			randbuf = kzalloc(rand_len, GFP_KERNEL);
+			get_random_bytes(randbuf, rand_len);
+			memcpy_toio(devinfo->tcm + address, randbuf, rand_len);
+			kfree(randbuf);
+		}
 	} else {
 		brcmf_dbg(PCIE, "No matching NVRAM file found %s\n",
 			  devinfo->nvram_name);
-- 
2.39.2

[PATCH AUTOSEL 6.3 06/59] wifi: brcmfmac: cfg80211: Pass the PMK in binary instead of hex

[Sasha Levin]

From: Hector Martin <marcan@marcan.st>

[ Upstream commit 89b89e52153fda2733562776c7c9d9d3ebf8dd6d ]

Apparently the hex passphrase mechanism does not work on newer
chips/firmware (e.g. BCM4387). It seems there was a simple way of
passing it in binary all along, so use that and avoid the hexification.

OpenBSD has been doing it like this from the beginning, so this should
work on all chips.

Also clear the structure before setting the PMK. This was leaking
uninitialized stack contents to the device.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230214092423.15175-6-marcan@marcan.st
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index a9690ec4c850c..044dca23744e9 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -1617,13 +1617,14 @@ static int brcmf_set_pmk(struct brcmf_if *ifp, const u8 *pmk_data, u16 pmk_len)
 {
 	struct brcmf_pub *drvr = ifp->drvr;
 	struct brcmf_wsec_pmk_le pmk;
-	int i, err;
+	int err;
+
+	memset(&pmk, 0, sizeof(pmk));
 
-	/* convert to firmware key format */
-	pmk.key_len = cpu_to_le16(pmk_len << 1);
-	pmk.flags = cpu_to_le16(BRCMF_WSEC_PASSPHRASE);
-	for (i = 0; i < pmk_len; i++)
-		snprintf(&pmk.key[2 * i], 3, "%02x", pmk_data[i]);
+	/* pass pmk directly */
+	pmk.key_len = cpu_to_le16(pmk_len);
+	pmk.flags = cpu_to_le16(0);
+	memcpy(pmk.key, pmk_data, pmk_len);
 
 	/* store psk in firmware */
 	err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_WSEC_PMK,
-- 
2.39.2

[PATCH AUTOSEL 6.3 07/59] wifi: brcmfmac: pcie: Add IDs/properties for BCM4387

[Sasha Levin]

From: Hector Martin <marcan@marcan.st>

[ Upstream commit 117ace4014cce3fb78b40eb8028bb0f4fc37dd6f ]

This chip is present on Apple M1 Pro/Max (t600x) platforms:

* maldives   (apple,j314s): MacBook Pro (14-inch, M1 Pro, 2021)
* maldives   (apple,j314c): MacBook Pro (14-inch, M1 Max, 2021)
* madagascar (apple,j316s): MacBook Pro (16-inch, M1 Pro, 2021)
* madagascar (apple,j316c): MacBook Pro (16-inch, M1 Max, 2021)

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230214092423.15175-7-marcan@marcan.st
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c   | 2 ++
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c   | 8 ++++++++
 .../net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h | 2 ++
 3 files changed, 12 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
index 8073f31be27d9..9cdbd8d438439 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
@@ -737,6 +737,8 @@ static u32 brcmf_chip_tcm_rambase(struct brcmf_chip_priv *ci)
 		return 0x170000;
 	case BRCM_CC_4378_CHIP_ID:
 		return 0x352000;
+	case BRCM_CC_4387_CHIP_ID:
+		return 0x740000;
 	default:
 		brcmf_err("unknown chip: %s\n", ci->pub.name);
 		break;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index 2835ef4edb18f..d2dad5414f396 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -67,6 +67,7 @@ BRCMF_FW_DEF(4366C, "brcmfmac4366c-pcie");
 BRCMF_FW_DEF(4371, "brcmfmac4371-pcie");
 BRCMF_FW_CLM_DEF(4377B3, "brcmfmac4377b3-pcie");
 BRCMF_FW_CLM_DEF(4378B1, "brcmfmac4378b1-pcie");
+BRCMF_FW_CLM_DEF(4387C2, "brcmfmac4387c2-pcie");
 
 /* firmware config files */
 MODULE_FIRMWARE(BRCMF_FW_DEFAULT_PATH "brcmfmac*-pcie.txt");
@@ -101,6 +102,7 @@ static const struct brcmf_firmware_mapping brcmf_pcie_fwnames[] = {
 	BRCMF_FW_ENTRY(BRCM_CC_4371_CHIP_ID, 0xFFFFFFFF, 4371),
 	BRCMF_FW_ENTRY(BRCM_CC_4377_CHIP_ID, 0xFFFFFFFF, 4377B3), /* revision ID 4 */
 	BRCMF_FW_ENTRY(BRCM_CC_4378_CHIP_ID, 0xFFFFFFFF, 4378B1), /* revision ID 3 */
+	BRCMF_FW_ENTRY(BRCM_CC_4387_CHIP_ID, 0xFFFFFFFF, 4387C2), /* revision ID 7 */
 };
 
 #define BRCMF_PCIE_FW_UP_TIMEOUT		5000 /* msec */
@@ -2048,6 +2050,11 @@ static int brcmf_pcie_read_otp(struct brcmf_pciedev_info *devinfo)
 		base = 0x1120;
 		words = 0x170;
 		break;
+	case BRCM_CC_4387_CHIP_ID:
+		coreid = BCMA_CORE_GCI;
+		base = 0x113c;
+		words = 0x170;
+		break;
 	default:
 		/* OTP not supported on this chip */
 		return 0;
@@ -2662,6 +2669,7 @@ static const struct pci_device_id brcmf_pcie_devid_table[] = {
 	BRCMF_PCIE_DEVICE(BRCM_PCIE_43596_DEVICE_ID, CYW),
 	BRCMF_PCIE_DEVICE(BRCM_PCIE_4377_DEVICE_ID, WCC),
 	BRCMF_PCIE_DEVICE(BRCM_PCIE_4378_DEVICE_ID, WCC),
+	BRCMF_PCIE_DEVICE(BRCM_PCIE_4387_DEVICE_ID, WCC),
 
 	{ /* end: all zeroes */ }
 };
diff --git a/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h b/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
index 896615f579522..44684bf1b9acc 100644
--- a/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
+++ b/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
@@ -54,6 +54,7 @@
 #define BRCM_CC_4371_CHIP_ID		0x4371
 #define BRCM_CC_4377_CHIP_ID		0x4377
 #define BRCM_CC_4378_CHIP_ID		0x4378
+#define BRCM_CC_4387_CHIP_ID		0x4387
 #define CY_CC_4373_CHIP_ID		0x4373
 #define CY_CC_43012_CHIP_ID		43012
 #define CY_CC_43439_CHIP_ID		43439
@@ -95,6 +96,7 @@
 #define BRCM_PCIE_43596_DEVICE_ID	0x4415
 #define BRCM_PCIE_4377_DEVICE_ID	0x4488
 #define BRCM_PCIE_4378_DEVICE_ID	0x4425
+#define BRCM_PCIE_4387_DEVICE_ID	0x4433
 
 /* brcmsmac IDs */
 #define BCM4313_D11N2G_ID	0x4727	/* 4313 802.11n 2.4G device */
-- 
2.39.2

[PATCH AUTOSEL 6.3 08/59] bpf, mips: Implement DADDI workarounds for JIT

[Sasha Levin]

From: Jiaxun Yang <jiaxun.yang@flygoat.com>

[ Upstream commit bbefef2f07080cd502a93cb1c529e1c8a6c4ac8e ]

For DADDI errata we just workaround by disable immediate operation
for BPF_ADD / BPF_SUB to avoid generation of DADDIU.

All other use cases in JIT won't cause overflow thus they are all safe.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Link: https://lore.kernel.org/bpf/20230228113305.83751-2-jiaxun.yang@flygoat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/Kconfig            | 1 -
 arch/mips/net/bpf_jit_comp.c | 4 ++++
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e2f3ca73f40d6..edc7d8790f1e8 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -64,7 +64,6 @@ config MIPS
 	select HAVE_DMA_CONTIGUOUS
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_EBPF_JIT if !CPU_MICROMIPS && \
-				!CPU_DADDI_WORKAROUNDS && \
 				!CPU_R4000_WORKAROUNDS && \
 				!CPU_R4400_WORKAROUNDS
 	select HAVE_EXIT_THREAD
diff --git a/arch/mips/net/bpf_jit_comp.c b/arch/mips/net/bpf_jit_comp.c
index b17130d510d49..a40d926b65139 100644
--- a/arch/mips/net/bpf_jit_comp.c
+++ b/arch/mips/net/bpf_jit_comp.c
@@ -218,9 +218,13 @@ bool valid_alu_i(u8 op, s32 imm)
 		/* All legal eBPF values are valid */
 		return true;
 	case BPF_ADD:
+		if (IS_ENABLED(CONFIG_CPU_DADDI_WORKAROUNDS))
+			return false;
 		/* imm must be 16 bits */
 		return imm >= -0x8000 && imm <= 0x7fff;
 	case BPF_SUB:
+		if (IS_ENABLED(CONFIG_CPU_DADDI_WORKAROUNDS))
+			return false;
 		/* -imm must be 16 bits */
 		return imm >= -0x7fff && imm <= 0x8000;
 	case BPF_AND:
-- 
2.39.2

Re: [PATCH AUTOSEL 6.3 08/59] bpf, mips: Implement DADDI workarounds for JIT

[Jiaxun Yang]

> 2023年5月4日 20:40，Sasha Levin <sashal@kernel.org> 写道：
> 
> From: Jiaxun Yang <jiaxun.yang@flygoat.com>
> 
> [ Upstream commit bbefef2f07080cd502a93cb1c529e1c8a6c4ac8e ]
> 
> For DADDI errata we just workaround by disable immediate operation
> for BPF_ADD / BPF_SUB to avoid generation of DADDIU.
> 
> All other use cases in JIT won't cause overflow thus they are all safe.
> 
> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
> Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
> Link: https://lore.kernel.org/bpf/20230228113305.83751-2-jiaxun.yang@flygoat.com
> Signed-off-by: Sasha Levin <sashal@kernel.org>

Hi Sasha,

I think this patch should count as a functional improvement instead of regression fix.

Please drop it from stable queue.

Thanks
Jiaxun

> ---
> arch/mips/Kconfig            | 1 -
> arch/mips/net/bpf_jit_comp.c | 4 ++++
> 2 files changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index e2f3ca73f40d6..edc7d8790f1e8 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -64,7 +64,6 @@ config MIPS
> select HAVE_DMA_CONTIGUOUS
> select HAVE_DYNAMIC_FTRACE
> select HAVE_EBPF_JIT if !CPU_MICROMIPS && \
> - !CPU_DADDI_WORKAROUNDS && \
> !CPU_R4000_WORKAROUNDS && \
> !CPU_R4400_WORKAROUNDS
> select HAVE_EXIT_THREAD
> diff --git a/arch/mips/net/bpf_jit_comp.c b/arch/mips/net/bpf_jit_comp.c
> index b17130d510d49..a40d926b65139 100644
> --- a/arch/mips/net/bpf_jit_comp.c
> +++ b/arch/mips/net/bpf_jit_comp.c
> @@ -218,9 +218,13 @@ bool valid_alu_i(u8 op, s32 imm)
> /* All legal eBPF values are valid */
> return true;
> case BPF_ADD:
> + if (IS_ENABLED(CONFIG_CPU_DADDI_WORKAROUNDS))
> + return false;
> /* imm must be 16 bits */
> return imm >= -0x8000 && imm <= 0x7fff;
> case BPF_SUB:
> + if (IS_ENABLED(CONFIG_CPU_DADDI_WORKAROUNDS))
> + return false;
> /* -imm must be 16 bits */
> return imm >= -0x7fff && imm <= 0x8000;
> case BPF_AND:
> -- 
> 2.39.2
> 

Re: [PATCH AUTOSEL 6.3 08/59] bpf, mips: Implement DADDI workarounds for JIT

[Sasha Levin]

On Fri, May 05, 2023 at 01:04:14PM +0100, Jiaxun Yang wrote:
>
>
>> 2023年5月4日 20:40，Sasha Levin <sashal@kernel.org> 写道：
>>
>> From: Jiaxun Yang <jiaxun.yang@flygoat.com>
>>
>> [ Upstream commit bbefef2f07080cd502a93cb1c529e1c8a6c4ac8e ]
>>
>> For DADDI errata we just workaround by disable immediate operation
>> for BPF_ADD / BPF_SUB to avoid generation of DADDIU.
>>
>> All other use cases in JIT won't cause overflow thus they are all safe.
>>
>> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
>> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
>> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
>> Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
>> Link: https://lore.kernel.org/bpf/20230228113305.83751-2-jiaxun.yang@flygoat.com
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>
>Hi Sasha,
>
>I think this patch should count as a functional improvement instead of regression fix.
>
>Please drop it from stable queue.

Dropped, thanks!

-- 
Thanks,
Sasha

[PATCH AUTOSEL 6.3 09/59] ext2: Check block size validity during mount

[Sasha Levin]

From: Jan Kara <jack@suse.cz>

[ Upstream commit 62aeb94433fcec80241754b70d0d1836d5926b0a ]

Check that log of block size stored in the superblock has sensible
value. Otherwise the shift computing the block size can overflow leading
to undefined behavior.

Reported-by: syzbot+4fec412f59eba8c01b77@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext2/ext2.h  | 1 +
 fs/ext2/super.c | 7 +++++++
 2 files changed, 8 insertions(+)

diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index cb78d7dcfb952..c60cb900bb2f4 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -180,6 +180,7 @@ static inline struct ext2_sb_info *EXT2_SB(struct super_block *sb)
 #define EXT2_MIN_BLOCK_SIZE		1024
 #define	EXT2_MAX_BLOCK_SIZE		4096
 #define EXT2_MIN_BLOCK_LOG_SIZE		  10
+#define EXT2_MAX_BLOCK_LOG_SIZE		  16
 #define EXT2_BLOCK_SIZE(s)		((s)->s_blocksize)
 #define	EXT2_ADDR_PER_BLOCK(s)		(EXT2_BLOCK_SIZE(s) / sizeof (__u32))
 #define EXT2_BLOCK_SIZE_BITS(s)		((s)->s_blocksize_bits)
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index 69c88facfe90e..f342f347a695f 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -945,6 +945,13 @@ static int ext2_fill_super(struct super_block *sb, void *data, int silent)
 		goto failed_mount;
 	}
 
+	if (le32_to_cpu(es->s_log_block_size) >
+	    (EXT2_MAX_BLOCK_LOG_SIZE - BLOCK_SIZE_BITS)) {
+		ext2_msg(sb, KERN_ERR,
+			 "Invalid log block size: %u",
+			 le32_to_cpu(es->s_log_block_size));
+		goto failed_mount;
+	}
 	blocksize = BLOCK_SIZE << le32_to_cpu(sbi->s_es->s_log_block_size);
 
 	if (test_opt(sb, DAX)) {
-- 
2.39.2

[PATCH AUTOSEL 6.3 10/59] scsi: lpfc: Prevent lpfc_debugfs_lockstat_write() buffer overflow

[Sasha Levin]

From: Justin Tee <justin.tee@broadcom.com>

[ Upstream commit c6087b82a9146826564a55c5ca0164cac40348f5 ]

A static code analysis tool flagged the possibility of buffer overflow when
using copy_from_user() for a debugfs entry.

Currently, it is possible that copy_from_user() copies more bytes than what
would fit in the mybuf char array.  Add a min() restriction check between
sizeof(mybuf) - 1 and nbytes passed from the userspace buffer to protect
against buffer overflow.

Link: https://lore.kernel.org/r/20230301231626.9621-2-justintee8345@gmail.com
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_debugfs.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index f5252e45a48a2..3e365e5e194a2 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -2157,10 +2157,13 @@ lpfc_debugfs_lockstat_write(struct file *file, const char __user *buf,
 	char mybuf[64];
 	char *pbuf;
 	int i;
+	size_t bsize;
 
 	memset(mybuf, 0, sizeof(mybuf));
 
-	if (copy_from_user(mybuf, buf, nbytes))
+	bsize = min(nbytes, (sizeof(mybuf) - 1));
+
+	if (copy_from_user(mybuf, buf, bsize))
 		return -EFAULT;
 	pbuf = &mybuf[0];
 
@@ -2181,7 +2184,7 @@ lpfc_debugfs_lockstat_write(struct file *file, const char __user *buf,
 			qp->lock_conflict.wq_access = 0;
 		}
 	}
-	return nbytes;
+	return bsize;
 }
 #endif
 
-- 
2.39.2

[PATCH AUTOSEL 6.3 11/59] scsi: lpfc: Correct used_rpi count when devloss tmo fires with no recovery

[Sasha Levin]

From: Justin Tee <justin.tee@broadcom.com>

[ Upstream commit db651ec22524eb8f9c854fbb4d9acd5d7e5be9e4 ]

A fabric controller can sometimes send an RDP request right before a link
down event.  Because of this outstanding RDP request, the driver does not
remove the last reference count on its ndlp causing a potential leak of RPI
resources when devloss tmo fires.

In lpfc_cmpl_els_rsp(), modify the NPIV clause to always allow the
lpfc_drop_node() routine to execute when not registered with SCSI
transport.

This relaxes the contraint that an NPIV ndlp must be in a specific state in
order to call lpfc_drop node.  Logic is revised such that the
lpfc_drop_node() routine is always called to ensure the last ndlp decrement
occurs.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230301231626.9621-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_els.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 35b252f1ef731..62d2ca688cd14 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5455,18 +5455,20 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 	 * these conditions and release the RPI.
 	 */
 	if (phba->sli_rev == LPFC_SLI_REV4 &&
-	    (vport && vport->port_type == LPFC_NPIV_PORT) &&
-	    !(ndlp->fc4_xpt_flags & SCSI_XPT_REGD) &&
-	    ndlp->nlp_flag & NLP_RELEASE_RPI) {
-		if (ndlp->nlp_state !=  NLP_STE_PLOGI_ISSUE &&
-		    ndlp->nlp_state != NLP_STE_REG_LOGIN_ISSUE) {
-			lpfc_sli4_free_rpi(phba, ndlp->nlp_rpi);
-			spin_lock_irq(&ndlp->lock);
-			ndlp->nlp_rpi = LPFC_RPI_ALLOC_ERROR;
-			ndlp->nlp_flag &= ~NLP_RELEASE_RPI;
-			spin_unlock_irq(&ndlp->lock);
-			lpfc_drop_node(vport, ndlp);
+	    vport && vport->port_type == LPFC_NPIV_PORT &&
+	    !(ndlp->fc4_xpt_flags & SCSI_XPT_REGD)) {
+		if (ndlp->nlp_flag & NLP_RELEASE_RPI) {
+			if (ndlp->nlp_state != NLP_STE_PLOGI_ISSUE &&
+			    ndlp->nlp_state != NLP_STE_REG_LOGIN_ISSUE) {
+				lpfc_sli4_free_rpi(phba, ndlp->nlp_rpi);
+				spin_lock_irq(&ndlp->lock);
+				ndlp->nlp_rpi = LPFC_RPI_ALLOC_ERROR;
+				ndlp->nlp_flag &= ~NLP_RELEASE_RPI;
+				spin_unlock_irq(&ndlp->lock);
+			}
 		}
+
+		lpfc_drop_node(vport, ndlp);
 	}
 
 	/* Release the originating I/O reference. */
-- 
2.39.2

[PATCH AUTOSEL 6.3 12/59] wifi: rtw88: fix memory leak in rtw_usb_probe()

[Sasha Levin]

From: Dongliang Mu <dzm91@hust.edu.cn>

[ Upstream commit 48181d285623198c33bb9698992502687b258efa ]

drivers/net/wireless/realtek/rtw88/usb.c:876 rtw_usb_probe()
warn: 'hw' from ieee80211_alloc_hw() not released on lines: 811

Fix this by modifying return to a goto statement.

Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230309021636.528601-1-dzm91@hust.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw88/usb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtw88/usb.c b/drivers/net/wireless/realtek/rtw88/usb.c
index 2a8336b1847a5..68e1b782d1992 100644
--- a/drivers/net/wireless/realtek/rtw88/usb.c
+++ b/drivers/net/wireless/realtek/rtw88/usb.c
@@ -808,7 +808,7 @@ int rtw_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 
 	ret = rtw_usb_alloc_rx_bufs(rtwusb);
 	if (ret)
-		return ret;
+		goto err_release_hw;
 
 	ret = rtw_core_init(rtwdev);
 	if (ret)
-- 
2.39.2

[PATCH AUTOSEL 6.3 13/59] wifi: brcmfmac: slab-out-of-bounds read in brcmf_get_assoc_ies()

[Sasha Levin]

From: Jisoo Jang <jisoo.jang@yonsei.ac.kr>

[ Upstream commit 0da40e018fd034d87c9460123fa7f897b69fdee7 ]

Fix a slab-out-of-bounds read that occurs in kmemdup() called from
brcmf_get_assoc_ies().
The bug could occur when assoc_info->req_len, data from a URB provided
by a USB device, is bigger than the size of buffer which is defined as
WL_EXTRA_BUF_MAX.

Add the size check for req_len/resp_len of assoc_info.

Found by a modified version of syzkaller.

[   46.592467][    T7] ==================================================================
[   46.594687][    T7] BUG: KASAN: slab-out-of-bounds in kmemdup+0x3e/0x50
[   46.596572][    T7] Read of size 3014656 at addr ffff888019442000 by task kworker/0:1/7
[   46.598575][    T7]
[   46.599157][    T7] CPU: 0 PID: 7 Comm: kworker/0:1 Tainted: G           O      5.14.0+ #145
[   46.601333][    T7] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[   46.604360][    T7] Workqueue: events brcmf_fweh_event_worker
[   46.605943][    T7] Call Trace:
[   46.606584][    T7]  dump_stack_lvl+0x8e/0xd1
[   46.607446][    T7]  print_address_description.constprop.0.cold+0x93/0x334
[   46.608610][    T7]  ? kmemdup+0x3e/0x50
[   46.609341][    T7]  kasan_report.cold+0x79/0xd5
[   46.610151][    T7]  ? kmemdup+0x3e/0x50
[   46.610796][    T7]  kasan_check_range+0x14e/0x1b0
[   46.611691][    T7]  memcpy+0x20/0x60
[   46.612323][    T7]  kmemdup+0x3e/0x50
[   46.612987][    T7]  brcmf_get_assoc_ies+0x967/0xf60
[   46.613904][    T7]  ? brcmf_notify_vif_event+0x3d0/0x3d0
[   46.614831][    T7]  ? lock_chain_count+0x20/0x20
[   46.615683][    T7]  ? mark_lock.part.0+0xfc/0x2770
[   46.616552][    T7]  ? lock_chain_count+0x20/0x20
[   46.617409][    T7]  ? mark_lock.part.0+0xfc/0x2770
[   46.618244][    T7]  ? lock_chain_count+0x20/0x20
[   46.619024][    T7]  brcmf_bss_connect_done.constprop.0+0x241/0x2e0
[   46.620019][    T7]  ? brcmf_parse_configure_security.isra.0+0x2a0/0x2a0
[   46.620818][    T7]  ? __lock_acquire+0x181f/0x5790
[   46.621462][    T7]  brcmf_notify_connect_status+0x448/0x1950
[   46.622134][    T7]  ? rcu_read_lock_bh_held+0xb0/0xb0
[   46.622736][    T7]  ? brcmf_cfg80211_join_ibss+0x7b0/0x7b0
[   46.623390][    T7]  ? find_held_lock+0x2d/0x110
[   46.623962][    T7]  ? brcmf_fweh_event_worker+0x19f/0xc60
[   46.624603][    T7]  ? mark_held_locks+0x9f/0xe0
[   46.625145][    T7]  ? lockdep_hardirqs_on_prepare+0x3e0/0x3e0
[   46.625871][    T7]  ? brcmf_cfg80211_join_ibss+0x7b0/0x7b0
[   46.626545][    T7]  brcmf_fweh_call_event_handler.isra.0+0x90/0x100
[   46.627338][    T7]  brcmf_fweh_event_worker+0x557/0xc60
[   46.627962][    T7]  ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100
[   46.628736][    T7]  ? rcu_read_lock_sched_held+0xa1/0xd0
[   46.629396][    T7]  ? rcu_read_lock_bh_held+0xb0/0xb0
[   46.629970][    T7]  ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[   46.630649][    T7]  process_one_work+0x92b/0x1460
[   46.631205][    T7]  ? pwq_dec_nr_in_flight+0x330/0x330
[   46.631821][    T7]  ? rwlock_bug.part.0+0x90/0x90
[   46.632347][    T7]  worker_thread+0x95/0xe00
[   46.632832][    T7]  ? __kthread_parkme+0x115/0x1e0
[   46.633393][    T7]  ? process_one_work+0x1460/0x1460
[   46.633957][    T7]  kthread+0x3a1/0x480
[   46.634369][    T7]  ? set_kthread_struct+0x120/0x120
[   46.634933][    T7]  ret_from_fork+0x1f/0x30
[   46.635431][    T7]
[   46.635687][    T7] Allocated by task 7:
[   46.636151][    T7]  kasan_save_stack+0x1b/0x40
[   46.636628][    T7]  __kasan_kmalloc+0x7c/0x90
[   46.637108][    T7]  kmem_cache_alloc_trace+0x19e/0x330
[   46.637696][    T7]  brcmf_cfg80211_attach+0x4a0/0x4040
[   46.638275][    T7]  brcmf_attach+0x389/0xd40
[   46.638739][    T7]  brcmf_usb_probe+0x12de/0x1690
[   46.639279][    T7]  usb_probe_interface+0x2aa/0x760
[   46.639820][    T7]  really_probe+0x205/0xb70
[   46.640342][    T7]  __driver_probe_device+0x311/0x4b0
[   46.640876][    T7]  driver_probe_device+0x4e/0x150
[   46.641445][    T7]  __device_attach_driver+0x1cc/0x2a0
[   46.642000][    T7]  bus_for_each_drv+0x156/0x1d0
[   46.642543][    T7]  __device_attach+0x23f/0x3a0
[   46.643065][    T7]  bus_probe_device+0x1da/0x290
[   46.643644][    T7]  device_add+0xb7b/0x1eb0
[   46.644130][    T7]  usb_set_configuration+0xf59/0x16f0
[   46.644720][    T7]  usb_generic_driver_probe+0x82/0xa0
[   46.645295][    T7]  usb_probe_device+0xbb/0x250
[   46.645786][    T7]  really_probe+0x205/0xb70
[   46.646258][    T7]  __driver_probe_device+0x311/0x4b0
[   46.646804][    T7]  driver_probe_device+0x4e/0x150
[   46.647387][    T7]  __device_attach_driver+0x1cc/0x2a0
[   46.647926][    T7]  bus_for_each_drv+0x156/0x1d0
[   46.648454][    T7]  __device_attach+0x23f/0x3a0
[   46.648939][    T7]  bus_probe_device+0x1da/0x290
[   46.649478][    T7]  device_add+0xb7b/0x1eb0
[   46.649936][    T7]  usb_new_device.cold+0x49c/0x1029
[   46.650526][    T7]  hub_event+0x1c98/0x3950
[   46.650975][    T7]  process_one_work+0x92b/0x1460
[   46.651535][    T7]  worker_thread+0x95/0xe00
[   46.651991][    T7]  kthread+0x3a1/0x480
[   46.652413][    T7]  ret_from_fork+0x1f/0x30
[   46.652885][    T7]
[   46.653131][    T7] The buggy address belongs to the object at ffff888019442000
[   46.653131][    T7]  which belongs to the cache kmalloc-2k of size 2048
[   46.654669][    T7] The buggy address is located 0 bytes inside of
[   46.654669][    T7]  2048-byte region [ffff888019442000, ffff888019442800)
[   46.656137][    T7] The buggy address belongs to the page:
[   46.656720][    T7] page:ffffea0000651000 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x19440
[   46.657792][    T7] head:ffffea0000651000 order:3 compound_mapcount:0 compound_pincount:0
[   46.658673][    T7] flags: 0x100000000010200(slab|head|node=0|zone=1)
[   46.659422][    T7] raw: 0100000000010200 0000000000000000 dead000000000122 ffff888100042000
[   46.660363][    T7] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000
[   46.661236][    T7] page dumped because: kasan: bad access detected
[   46.661956][    T7] page_owner tracks the page as allocated
[   46.662588][    T7] page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP), pid 7, ts 31136961085, free_ts 0
[   46.664271][    T7]  prep_new_page+0x1aa/0x240
[   46.664763][    T7]  get_page_from_freelist+0x159a/0x27c0
[   46.665340][    T7]  __alloc_pages+0x2da/0x6a0
[   46.665847][    T7]  alloc_pages+0xec/0x1e0
[   46.666308][    T7]  allocate_slab+0x380/0x4e0
[   46.666770][    T7]  ___slab_alloc+0x5bc/0x940
[   46.667264][    T7]  __slab_alloc+0x6d/0x80
[   46.667712][    T7]  kmem_cache_alloc_trace+0x30a/0x330
[   46.668299][    T7]  brcmf_usbdev_qinit.constprop.0+0x50/0x470
[   46.668885][    T7]  brcmf_usb_probe+0xc97/0x1690
[   46.669438][    T7]  usb_probe_interface+0x2aa/0x760
[   46.669988][    T7]  really_probe+0x205/0xb70
[   46.670487][    T7]  __driver_probe_device+0x311/0x4b0
[   46.671031][    T7]  driver_probe_device+0x4e/0x150
[   46.671604][    T7]  __device_attach_driver+0x1cc/0x2a0
[   46.672192][    T7]  bus_for_each_drv+0x156/0x1d0
[   46.672739][    T7] page_owner free stack trace missing
[   46.673335][    T7]
[   46.673620][    T7] Memory state around the buggy address:
[   46.674213][    T7]  ffff888019442700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   46.675083][    T7]  ffff888019442780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   46.675994][    T7] >ffff888019442800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   46.676875][    T7]                    ^
[   46.677323][    T7]  ffff888019442880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   46.678190][    T7]  ffff888019442900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   46.679052][    T7] ==================================================================
[   46.679945][    T7] Disabling lock debugging due to kernel taint
[   46.680725][    T7] Kernel panic - not syncing:

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230309104457.22628-1-jisoo.jang@yonsei.ac.kr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index 044dca23744e9..af97449734a5f 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -6165,6 +6165,11 @@ static s32 brcmf_get_assoc_ies(struct brcmf_cfg80211_info *cfg,
 		(struct brcmf_cfg80211_assoc_ielen_le *)cfg->extra_buf;
 	req_len = le32_to_cpu(assoc_info->req_len);
 	resp_len = le32_to_cpu(assoc_info->resp_len);
+	if (req_len > WL_EXTRA_BUF_MAX || resp_len > WL_EXTRA_BUF_MAX) {
+		bphy_err(drvr, "invalid lengths in assoc info: req %u resp %u\n",
+			 req_len, resp_len);
+		return -EINVAL;
+	}
 	if (req_len) {
 		err = brcmf_fil_iovar_data_get(ifp, "assoc_req_ies",
 					       cfg->extra_buf,
-- 
2.39.2

[PATCH AUTOSEL 6.3 14/59] bnxt: avoid overflow in bnxt_get_nvram_directory()

[Sasha Levin]

From: Maxim Korotkov <korotkov.maxim.s@gmail.com>

[ Upstream commit 7c6dddc239abe660598c49ec95ea0ed6399a4b2a ]

The value of an arithmetic expression is subject
of possible overflow due to a failure to cast operands to a larger data
type before performing arithmetic. Used macro for multiplication instead
operator for avoiding overflow.

Found by Security Code and Linux Verification
Center (linuxtesting.org) with SVACE.

Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230309174347.3515-1-korotkov.maxim.s@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 6bd18eb5137f4..2dd8ee4a6f75b 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -2864,7 +2864,7 @@ static int bnxt_get_nvram_directory(struct net_device *dev, u32 len, u8 *data)
 	if (rc)
 		return rc;
 
-	buflen = dir_entries * entry_length;
+	buflen = mul_u32_u32(dir_entries, entry_length);
 	buf = hwrm_req_dma_slice(bp, req, buflen, &dma_handle);
 	if (!buf) {
 		hwrm_req_drop(bp, req);
-- 
2.39.2

[PATCH AUTOSEL 6.3 15/59] net: pasemi: Fix return type of pasemi_mac_start_tx()

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit c8384d4a51e7cb0e6587f3143f29099f202c5de1 ]

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
warning in clang aims to catch these at compile time, which reveals:

  drivers/net/ethernet/pasemi/pasemi_mac.c:1665:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          .ndo_start_xmit         = pasemi_mac_start_tx,
                                    ^~~~~~~~~~~~~~~~~~~
  1 error generated.

->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of
pasemi_mac_start_tx() to match the prototype's to resolve the warning.
While PowerPC does not currently implement support for kCFI, it could in
the future, which means this warning becomes a fatal CFI failure at run
time.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20230319-pasemi-incompatible-pointer-types-strict-v1-1-1b9459d8aef0@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/pasemi/pasemi_mac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/pasemi/pasemi_mac.c b/drivers/net/ethernet/pasemi/pasemi_mac.c
index aaab590ef548d..ed7dd0a042355 100644
--- a/drivers/net/ethernet/pasemi/pasemi_mac.c
+++ b/drivers/net/ethernet/pasemi/pasemi_mac.c
@@ -1423,7 +1423,7 @@ static void pasemi_mac_queue_csdesc(const struct sk_buff *skb,
 	write_dma_reg(PAS_DMA_TXCHAN_INCR(txring->chan.chno), 2);
 }
 
-static int pasemi_mac_start_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t pasemi_mac_start_tx(struct sk_buff *skb, struct net_device *dev)
 {
 	struct pasemi_mac * const mac = netdev_priv(dev);
 	struct pasemi_mac_txring * const txring = tx_ring(mac);
-- 
2.39.2

[PATCH AUTOSEL 6.3 16/59] wifi: ath12k: fix memory leak in ath12k_qmi_driver_event_work()

[Sasha Levin]

From: Rajat Soni <quic_rajson@quicinc.com>

[ Upstream commit 960412bee0ea75f6b3c2dca4a3535795ee84c47a ]

Currently the buffer pointed by event is not freed in case
ATH12K_FLAG_UNREGISTERING bit is set, this causes memory leak.

Add a goto skip instead of return, to ensure event and all the
list entries are freed properly.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Rajat Soni <quic_rajson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230315090632.15065-1-quic_rajson@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath12k/qmi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath12k/qmi.c b/drivers/net/wireless/ath/ath12k/qmi.c
index 979a63f2e2ab8..03ba245fbee92 100644
--- a/drivers/net/wireless/ath/ath12k/qmi.c
+++ b/drivers/net/wireless/ath/ath12k/qmi.c
@@ -2991,7 +2991,7 @@ static void ath12k_qmi_driver_event_work(struct work_struct *work)
 		spin_unlock(&qmi->event_lock);
 
 		if (test_bit(ATH12K_FLAG_UNREGISTERING, &ab->dev_flags))
-			return;
+			goto skip;
 
 		switch (event->type) {
 		case ATH12K_QMI_EVENT_SERVER_ARRIVE:
@@ -3032,6 +3032,8 @@ static void ath12k_qmi_driver_event_work(struct work_struct *work)
 			ath12k_warn(ab, "invalid event type: %d", event->type);
 			break;
 		}
+
+skip:
 		kfree(event);
 		spin_lock(&qmi->event_lock);
 	}
-- 
2.39.2

[PATCH AUTOSEL 6.3 17/59] net: Catch invalid index in XPS mapping

[Sasha Levin]

From: Nick Child <nnac123@linux.ibm.com>

[ Upstream commit 5dd0dfd55baec0742ba8f5625a0dd064aca7db16 ]

When setting the XPS value of a TX queue, warn the user once if the
index of the queue is greater than the number of allocated TX queues.

Previously, this scenario went uncaught. In the best case, it resulted
in unnecessary allocations. In the worst case, it resulted in
out-of-bounds memory references through calls to `netdev_get_tx_queue(
dev, index)`. Therefore, it is important to inform the user but not
worth returning an error and risk downing the netdevice.

Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Link: https://lore.kernel.org/r/20230321150725.127229-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/dev.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/core/dev.c b/net/core/dev.c
index 1488f700bf819..ac7ef7c088688 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2535,6 +2535,8 @@ int __netif_set_xps_queue(struct net_device *dev, const unsigned long *mask,
 	struct xps_map *map, *new_map;
 	unsigned int nr_ids;
 
+	WARN_ON_ONCE(index >= dev->num_tx_queues);
+
 	if (dev->num_tc) {
 		/* Do not allow XPS on subordinate device directly */
 		num_tc = dev->num_tc;
-- 
2.39.2

[PATCH AUTOSEL 6.3 18/59] netdev: Enforce index cap in netdev_get_tx_queue

[Sasha Levin]

From: Nick Child <nnac123@linux.ibm.com>

[ Upstream commit 1cc6571f562774f1d928dc8b3cff50829b86e970 ]

When requesting a TX queue at a given index, warn on out-of-bounds
referencing if the index is greater than the allocated number of
queues.

Specifically, since this function is used heavily in the networking
stack use DEBUG_NET_WARN_ON_ONCE to avoid executing a new branch on
every packet.

Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://lore.kernel.org/r/20230321150725.127229-2-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/netdevice.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index c35f04f636f15..7db9f960221d3 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2463,6 +2463,7 @@ static inline
 struct netdev_queue *netdev_get_tx_queue(const struct net_device *dev,
 					 unsigned int index)
 {
+	DEBUG_NET_WARN_ON_ONCE(index >= dev->num_tx_queues);
 	return &dev->_tx[index];
 }
 
-- 
2.39.2

[PATCH AUTOSEL 6.3 19/59] scsi: target: iscsit: Free cmds before session free

[Sasha Levin]

From: Dmitry Bogdanov <d.bogdanov@yadro.com>

[ Upstream commit d8990b5a4d065f38f35d69bcd627ec5a7f8330ca ]

Commands from recovery entries are freed after session has been closed.
That leads to use-after-free at command free or NPE with such call trace:

Time2Retain timer expired for SID: 1, cleaning up iSCSI session.
BUG: kernel NULL pointer dereference, address: 0000000000000140
RIP: 0010:sbitmap_queue_clear+0x3a/0xa0
Call Trace:
 target_release_cmd_kref+0xd1/0x1f0 [target_core_mod]
 transport_generic_free_cmd+0xd1/0x180 [target_core_mod]
 iscsit_free_cmd+0x53/0xd0 [iscsi_target_mod]
 iscsit_free_connection_recovery_entries+0x29d/0x320 [iscsi_target_mod]
 iscsit_close_session+0x13a/0x140 [iscsi_target_mod]
 iscsit_check_post_dataout+0x440/0x440 [iscsi_target_mod]
 call_timer_fn+0x24/0x140

Move cleanup of recovery enrties to before session freeing.

Reported-by: Forza <forza@tnonline.net>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230319015620.96006-7-michael.christie@oracle.com
Reviewed-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/iscsi/iscsi_target.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index baf4da7bb3b4e..412efb576f785 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -4517,6 +4517,9 @@ int iscsit_close_session(struct iscsit_session *sess, bool can_sleep)
 	iscsit_stop_time2retain_timer(sess);
 	spin_unlock_bh(&se_tpg->session_lock);
 
+	if (sess->sess_ops->ErrorRecoveryLevel == 2)
+		iscsit_free_connection_recovery_entries(sess);
+
 	/*
 	 * transport_deregister_session_configfs() will clear the
 	 * struct se_node_acl->nacl_sess pointer now as a iscsi_np process context
@@ -4540,9 +4543,6 @@ int iscsit_close_session(struct iscsit_session *sess, bool can_sleep)
 
 	transport_deregister_session(sess->se_sess);
 
-	if (sess->sess_ops->ErrorRecoveryLevel == 2)
-		iscsit_free_connection_recovery_entries(sess);
-
 	iscsit_free_all_ooo_cmdsns(sess);
 
 	spin_lock_bh(&se_tpg->session_lock);
-- 
2.39.2

[PATCH AUTOSEL 6.3 20/59] lib: cpu_rmap: Avoid use after free on rmap->obj array entries

[Sasha Levin]

From: Eli Cohen <elic@nvidia.com>

[ Upstream commit 4e0473f1060aa49621d40a113afde24818101d37 ]

When calling irq_set_affinity_notifier() with NULL at the notify
argument, it will cause freeing of the glue pointer in the
corresponding array entry but will leave the pointer in the array. A
subsequent call to free_irq_cpu_rmap() will try to free this entry again
leading to possible use after free.

Fix that by setting NULL to the array entry and checking that we have
non-zero at the array entry when iterating over the array in
free_irq_cpu_rmap().

The current code does not suffer from this since there are no cases
where irq_set_affinity_notifier(irq, NULL) (note the NULL passed for the
notify arg) is called, followed by a call to free_irq_cpu_rmap() so we
don't hit and issue. Subsequent patches in this series excersize this
flow, hence the required fix.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/cpu_rmap.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/lib/cpu_rmap.c b/lib/cpu_rmap.c
index f08d9c56f712e..e77f12bb3c774 100644
--- a/lib/cpu_rmap.c
+++ b/lib/cpu_rmap.c
@@ -232,7 +232,8 @@ void free_irq_cpu_rmap(struct cpu_rmap *rmap)
 
 	for (index = 0; index < rmap->used; index++) {
 		glue = rmap->obj[index];
-		irq_set_affinity_notifier(glue->notify.irq, NULL);
+		if (glue)
+			irq_set_affinity_notifier(glue->notify.irq, NULL);
 	}
 
 	cpu_rmap_put(rmap);
@@ -268,6 +269,7 @@ static void irq_cpu_rmap_release(struct kref *ref)
 		container_of(ref, struct irq_glue, notify.kref);
 
 	cpu_rmap_put(glue->rmap);
+	glue->rmap->obj[glue->index] = NULL;
 	kfree(glue);
 }
 
@@ -297,6 +299,7 @@ int irq_cpu_rmap_add(struct cpu_rmap *rmap, int irq)
 	rc = irq_set_affinity_notifier(irq, &glue->notify);
 	if (rc) {
 		cpu_rmap_put(glue->rmap);
+		rmap->obj[glue->index] = NULL;
 		kfree(glue);
 	}
 	return rc;
-- 
2.39.2

[PATCH AUTOSEL 6.3 21/59] scsi: message: mptlan: Fix use after free bug in mptlan_remove() due to race condition

[Sasha Levin]

From: Zheng Wang <zyytlz.wz@163.com>

[ Upstream commit f486893288f3e9b171b836f43853a6426515d800 ]

mptlan_probe() calls mpt_register_lan_device() which initializes the
&priv->post_buckets_task workqueue. A call to
mpt_lan_wake_post_buckets_task() will subsequently start the work.

During driver unload in mptlan_remove() the following race may occur:

CPU0                  CPU1

                    |mpt_lan_post_receive_buckets_work()
mptlan_remove()     |
  free_netdev()     |
    kfree(dev);     |
                    |
                    | dev->mtu
                    |   //use

Fix this by finishing the work prior to cleaning up in mptlan_remove().

[mkp: we really should remove mptlan instead of attempting to fix it]

Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Link: https://lore.kernel.org/r/20230318081635.796479-1-zyytlz.wz@163.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/message/fusion/mptlan.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/message/fusion/mptlan.c b/drivers/message/fusion/mptlan.c
index 142eb5d5d9df6..de2e7bcf47847 100644
--- a/drivers/message/fusion/mptlan.c
+++ b/drivers/message/fusion/mptlan.c
@@ -1433,7 +1433,9 @@ mptlan_remove(struct pci_dev *pdev)
 {
 	MPT_ADAPTER 		*ioc = pci_get_drvdata(pdev);
 	struct net_device	*dev = ioc->netdev;
+	struct mpt_lan_priv *priv = netdev_priv(dev);
 
+	cancel_delayed_work_sync(&priv->post_buckets_task);
 	if(dev != NULL) {
 		unregister_netdev(dev);
 		free_netdev(dev);
-- 
2.39.2

[PATCH AUTOSEL 6.3 22/59] gfs2: Fix inode height consistency check

[Sasha Levin]

From: Andreas Gruenbacher <agruenba@redhat.com>

[ Upstream commit cfcdb5bad34f600aed7613c3c1a5e618111f77b7 ]

The maximum allowed height of an inode's metadata tree depends on the
filesystem block size; it is lower for bigger-block filesystems.  When
reading in an inode, make sure that the height doesn't exceed the
maximum allowed height.

Arrays like sd_heightsize are sized to be big enough for any filesystem
block size; they will often be slightly bigger than what's needed for a
specific filesystem.

Reported-by: syzbot+45d4691b1ed3c48eba05@syzkaller.appspotmail.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/glops.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c
index 4d99cc77a29b7..b65950e76be5a 100644
--- a/fs/gfs2/glops.c
+++ b/fs/gfs2/glops.c
@@ -396,6 +396,7 @@ static int inode_go_demote_ok(const struct gfs2_glock *gl)
 
 static int gfs2_dinode_in(struct gfs2_inode *ip, const void *buf)
 {
+	struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
 	const struct gfs2_dinode *str = buf;
 	struct timespec64 atime;
 	u16 height, depth;
@@ -442,7 +443,7 @@ static int gfs2_dinode_in(struct gfs2_inode *ip, const void *buf)
 	/* i_diskflags and i_eattr must be set before gfs2_set_inode_flags() */
 	gfs2_set_inode_flags(inode);
 	height = be16_to_cpu(str->di_height);
-	if (unlikely(height > GFS2_MAX_META_HEIGHT))
+	if (unlikely(height > sdp->sd_max_height))
 		goto corrupt;
 	ip->i_height = (u8)height;
 
-- 
2.39.2

[PATCH AUTOSEL 6.3 23/59] scsi: ufs: ufs-pci: Add support for Intel Lunar Lake

[Sasha Levin]

From: Adrian Hunter <adrian.hunter@intel.com>

[ Upstream commit 0a07d3c7a1d205b47d9f3608ff4e9d1065d63b6d ]

Add PCI ID to support Intel Lunar Lake, same as MTL.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230328105832.3495-1-adrian.hunter@intel.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ufs/host/ufshcd-pci.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ufs/host/ufshcd-pci.c b/drivers/ufs/host/ufshcd-pci.c
index 1c91f43e15c8e..9c911787f84c6 100644
--- a/drivers/ufs/host/ufshcd-pci.c
+++ b/drivers/ufs/host/ufshcd-pci.c
@@ -607,6 +607,7 @@ static const struct pci_device_id ufshcd_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x51FF), (kernel_ulong_t)&ufs_intel_adl_hba_vops },
 	{ PCI_VDEVICE(INTEL, 0x54FF), (kernel_ulong_t)&ufs_intel_adl_hba_vops },
 	{ PCI_VDEVICE(INTEL, 0x7E47), (kernel_ulong_t)&ufs_intel_mtl_hba_vops },
+	{ PCI_VDEVICE(INTEL, 0xA847), (kernel_ulong_t)&ufs_intel_mtl_hba_vops },
 	{ }	/* terminate list */
 };
 
-- 
2.39.2

[PATCH AUTOSEL 6.3 24/59] scsi: hisi_sas: Grab sas_dev lock when traversing the members of sas_dev.list

[Sasha Levin]

From: Xingui Yang <yangxingui@huawei.com>

[ Upstream commit 71fb36b5ff113a7674710b9d6063241eada84ff7 ]

When freeing slots in function slot_complete_v3_hw(), it is possible that
sas_dev.list is being traversed elsewhere, and it may trigger a NULL
pointer exception, such as follows:

==>cq thread                    ==>scsi_eh_6

                                ==>scsi_error_handler()
				  ==>sas_eh_handle_sas_errors()
				    ==>sas_scsi_find_task()
				      ==>lldd_abort_task()
==>slot_complete_v3_hw()              ==>hisi_sas_abort_task()
  ==>hisi_sas_slot_task_free()	        ==>dereg_device_v3_hw()
    ==>list_del_init()        		  ==>list_for_each_entry_safe()

[ 7165.434918] sas: Enter sas_scsi_recover_host busy: 32 failed: 32
[ 7165.434926] sas: trying to find task 0x00000000769b5ba5
[ 7165.434927] sas: sas_scsi_find_task: aborting task 0x00000000769b5ba5
[ 7165.434940] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(00000000769b5ba5) aborted
[ 7165.434964] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(00000000c9f7aa07) ignored
[ 7165.434965] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(00000000e2a1cf01) ignored
[ 7165.434968] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 7165.434972] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(0000000022d52d93) ignored
[ 7165.434975] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(0000000066a7516c) ignored
[ 7165.434976] Mem abort info:
[ 7165.434982]   ESR = 0x96000004
[ 7165.434991]   Exception class = DABT (current EL), IL = 32 bits
[ 7165.434992]   SET = 0, FnV = 0
[ 7165.434993]   EA = 0, S1PTW = 0
[ 7165.434994] Data abort info:
[ 7165.434994]   ISV = 0, ISS = 0x00000004
[ 7165.434995]   CM = 0, WnR = 0
[ 7165.434997] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000f29543f2
[ 7165.434998] [0000000000000000] pgd=0000000000000000
[ 7165.435003] Internal error: Oops: 96000004 [#1] SMP
[ 7165.439863] Process scsi_eh_6 (pid: 4109, stack limit = 0x00000000c43818d5)
[ 7165.468862] pstate: 00c00009 (nzcv daif +PAN +UAO)
[ 7165.473637] pc : dereg_device_v3_hw+0x68/0xa8 [hisi_sas_v3_hw]
[ 7165.479443] lr : dereg_device_v3_hw+0x2c/0xa8 [hisi_sas_v3_hw]
[ 7165.485247] sp : ffff00001d623bc0
[ 7165.488546] x29: ffff00001d623bc0 x28: ffffa027d03b9508
[ 7165.493835] x27: ffff80278ed50af0 x26: ffffa027dd31e0a8
[ 7165.499123] x25: ffffa027d9b27f88 x24: ffffa027d9b209f8
[ 7165.504411] x23: ffffa027c45b0d60 x22: ffff80278ec07c00
[ 7165.509700] x21: 0000000000000008 x20: ffffa027d9b209f8
[ 7165.514988] x19: ffffa027d9b27f88 x18: ffffffffffffffff
[ 7165.520276] x17: 0000000000000000 x16: 0000000000000000
[ 7165.525564] x15: ffff0000091d9708 x14: ffff0000093b7dc8
[ 7165.530852] x13: ffff0000093b7a23 x12: 6e7265746e692067
[ 7165.536140] x11: 0000000000000000 x10: 0000000000000bb0
[ 7165.541429] x9 : ffff00001d6238f0 x8 : ffffa027d877af00
[ 7165.546718] x7 : ffffa027d6329600 x6 : ffff7e809f58ca00
[ 7165.552006] x5 : 0000000000001f8a x4 : 000000000000088e
[ 7165.557295] x3 : ffffa027d9b27fa8 x2 : 0000000000000000
[ 7165.562583] x1 : 0000000000000000 x0 : 000000003000188e
[ 7165.567872] Call trace:
[ 7165.570309]  dereg_device_v3_hw+0x68/0xa8 [hisi_sas_v3_hw]
[ 7165.575775]  hisi_sas_abort_task+0x248/0x358 [hisi_sas_main]
[ 7165.581415]  sas_eh_handle_sas_errors+0x258/0x8e0 [libsas]
[ 7165.586876]  sas_scsi_recover_host+0x134/0x458 [libsas]
[ 7165.592082]  scsi_error_handler+0xb4/0x488
[ 7165.596163]  kthread+0x134/0x138
[ 7165.599380]  ret_from_fork+0x10/0x18
[ 7165.602940] Code: d5033e9f b9000040 aa0103e2 eb03003f (f9400021)
[ 7165.609004] kernel fault(0x1) notification starting on CPU 75
[ 7165.700728] ---[ end trace fc042cbbea224efc ]---
[ 7165.705326] Kernel panic - not syncing: Fatal exception

To fix the issue, grab sas_dev lock when traversing the members of
sas_dev.list in dereg_device_v3_hw() and hisi_sas_release_tasks() to avoid
concurrency of adding and deleting member. When function
hisi_sas_release_tasks() calls hisi_sas_do_release_task() to free slot, the
lock cannot be grabbed again in hisi_sas_slot_task_free(), then a bool
parameter need_lock is added.

Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1679283265-115066-2-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/hisi_sas/hisi_sas.h       |  3 ++-
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 25 ++++++++++++++++---------
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c |  2 +-
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c |  2 +-
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c |  4 +++-
 5 files changed, 23 insertions(+), 13 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 6f8a52a1b8087..423af1dc36487 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -653,7 +653,8 @@ extern void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy,
 extern void hisi_sas_phy_bcast(struct hisi_sas_phy *phy);
 extern void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba,
 				    struct sas_task *task,
-				    struct hisi_sas_slot *slot);
+				    struct hisi_sas_slot *slot,
+				    bool need_lock);
 extern void hisi_sas_init_mem(struct hisi_hba *hisi_hba);
 extern void hisi_sas_rst_work_handler(struct work_struct *work);
 extern void hisi_sas_sync_rst_work_handler(struct work_struct *work);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 8c038ccf1c095..2093c1e828177 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -205,7 +205,7 @@ static int hisi_sas_slot_index_alloc(struct hisi_hba *hisi_hba,
 }
 
 void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba, struct sas_task *task,
-			     struct hisi_sas_slot *slot)
+			     struct hisi_sas_slot *slot, bool need_lock)
 {
 	int device_id = slot->device_id;
 	struct hisi_sas_device *sas_dev = &hisi_hba->devices[device_id];
@@ -239,9 +239,13 @@ void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba, struct sas_task *task,
 		}
 	}
 
-	spin_lock(&sas_dev->lock);
-	list_del_init(&slot->entry);
-	spin_unlock(&sas_dev->lock);
+	if (need_lock) {
+		spin_lock(&sas_dev->lock);
+		list_del_init(&slot->entry);
+		spin_unlock(&sas_dev->lock);
+	} else {
+		list_del_init(&slot->entry);
+	}
 
 	memset(slot, 0, offsetof(struct hisi_sas_slot, buf));
 
@@ -1021,7 +1025,7 @@ static void hisi_sas_port_notify_formed(struct asd_sas_phy *sas_phy)
 }
 
 static void hisi_sas_do_release_task(struct hisi_hba *hisi_hba, struct sas_task *task,
-				     struct hisi_sas_slot *slot)
+				     struct hisi_sas_slot *slot, bool need_lock)
 {
 	if (task) {
 		unsigned long flags;
@@ -1038,7 +1042,7 @@ static void hisi_sas_do_release_task(struct hisi_hba *hisi_hba, struct sas_task
 		spin_unlock_irqrestore(&task->task_state_lock, flags);
 	}
 
-	hisi_sas_slot_task_free(hisi_hba, task, slot);
+	hisi_sas_slot_task_free(hisi_hba, task, slot, need_lock);
 }
 
 static void hisi_sas_release_task(struct hisi_hba *hisi_hba,
@@ -1047,8 +1051,11 @@ static void hisi_sas_release_task(struct hisi_hba *hisi_hba,
 	struct hisi_sas_slot *slot, *slot2;
 	struct hisi_sas_device *sas_dev = device->lldd_dev;
 
+	spin_lock(&sas_dev->lock);
 	list_for_each_entry_safe(slot, slot2, &sas_dev->list, entry)
-		hisi_sas_do_release_task(hisi_hba, slot->task, slot);
+		hisi_sas_do_release_task(hisi_hba, slot->task, slot, false);
+
+	spin_unlock(&sas_dev->lock);
 }
 
 void hisi_sas_release_tasks(struct hisi_hba *hisi_hba)
@@ -1574,7 +1581,7 @@ static int hisi_sas_abort_task(struct sas_task *task)
 		 */
 		if (rc == TMF_RESP_FUNC_COMPLETE && rc2 != TMF_RESP_FUNC_SUCC) {
 			if (task->lldd_task)
-				hisi_sas_do_release_task(hisi_hba, task, slot);
+				hisi_sas_do_release_task(hisi_hba, task, slot, true);
 		}
 	} else if (task->task_proto & SAS_PROTOCOL_SATA ||
 		task->task_proto & SAS_PROTOCOL_STP) {
@@ -1594,7 +1601,7 @@ static int hisi_sas_abort_task(struct sas_task *task)
 			 */
 			if ((sas_dev->dev_status == HISI_SAS_DEV_NCQ_ERR) &&
 			    qc && qc->scsicmd) {
-				hisi_sas_do_release_task(hisi_hba, task, slot);
+				hisi_sas_do_release_task(hisi_hba, task, slot, true);
 				rc = TMF_RESP_FUNC_COMPLETE;
 			} else {
 				rc = hisi_sas_softreset_ata_disk(device);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index d643c5a49aa94..7ea3665996994 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1306,7 +1306,7 @@ static void slot_complete_v1_hw(struct hisi_hba *hisi_hba,
 	}
 
 out:
-	hisi_sas_slot_task_free(hisi_hba, task, slot);
+	hisi_sas_slot_task_free(hisi_hba, task, slot, true);
 
 	if (task->task_done)
 		task->task_done(task);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index cded42f4ca445..ef896ef439705 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -2462,7 +2462,7 @@ static void slot_complete_v2_hw(struct hisi_hba *hisi_hba,
 	}
 	task->task_state_flags |= SAS_TASK_STATE_DONE;
 	spin_unlock_irqrestore(&task->task_state_lock, flags);
-	hisi_sas_slot_task_free(hisi_hba, task, slot);
+	hisi_sas_slot_task_free(hisi_hba, task, slot, true);
 
 	if (!is_internal && (task->task_proto != SAS_PROTOCOL_SMP)) {
 		spin_lock_irqsave(&device->done_lock, flags);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index a63279f55d096..81fe84a8a1508 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -883,6 +883,7 @@ static void dereg_device_v3_hw(struct hisi_hba *hisi_hba,
 
 	cfg_abt_set_query_iptt = hisi_sas_read32(hisi_hba,
 		CFG_ABT_SET_QUERY_IPTT);
+	spin_lock(&sas_dev->lock);
 	list_for_each_entry_safe(slot, slot2, &sas_dev->list, entry) {
 		cfg_abt_set_query_iptt &= ~CFG_SET_ABORTED_IPTT_MSK;
 		cfg_abt_set_query_iptt |= (1 << CFG_SET_ABORTED_EN_OFF) |
@@ -890,6 +891,7 @@ static void dereg_device_v3_hw(struct hisi_hba *hisi_hba,
 		hisi_sas_write32(hisi_hba, CFG_ABT_SET_QUERY_IPTT,
 			cfg_abt_set_query_iptt);
 	}
+	spin_unlock(&sas_dev->lock);
 	cfg_abt_set_query_iptt &= ~(1 << CFG_SET_ABORTED_EN_OFF);
 	hisi_sas_write32(hisi_hba, CFG_ABT_SET_QUERY_IPTT,
 		cfg_abt_set_query_iptt);
@@ -2374,7 +2376,7 @@ static void slot_complete_v3_hw(struct hisi_hba *hisi_hba,
 	}
 	task->task_state_flags |= SAS_TASK_STATE_DONE;
 	spin_unlock_irqrestore(&task->task_state_lock, flags);
-	hisi_sas_slot_task_free(hisi_hba, task, slot);
+	hisi_sas_slot_task_free(hisi_hba, task, slot, true);
 
 	if (!is_internal && (task->task_proto != SAS_PROTOCOL_SMP)) {
 		spin_lock_irqsave(&device->done_lock, flags);
-- 
2.39.2

[PATCH AUTOSEL 6.3 25/59] ext4: set goal start correctly in ext4_mb_normalize_request

[Sasha Levin]

From: Kemeng Shi <shikemeng@huaweicloud.com>

[ Upstream commit b07ffe6927c75d99af534d685282ea188d9f71a6 ]

We need to set ac_g_ex to notify the goal start used in
ext4_mb_find_by_goal. Set ac_g_ex instead of ac_f_ex in
ext4_mb_normalize_request.
Besides we should assure goal start is in range [first_data_block,
blocks_count) as ext4_mb_initialize_context does.

[ Added a check to make sure size is less than ar->pright; otherwise
  we could end up passing an underflowed value of ar->pright - size to
  ext4_get_group_no_and_offset(), which will trigger a BUG_ON later on.
  - TYT ]

Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/mballoc.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 5b2ae37a8b80b..0766c5211f6d8 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -3993,6 +3993,7 @@ ext4_mb_normalize_request(struct ext4_allocation_context *ac,
 				struct ext4_allocation_request *ar)
 {
 	struct ext4_sb_info *sbi = EXT4_SB(ac->ac_sb);
+	struct ext4_super_block *es = sbi->s_es;
 	int bsbits, max;
 	ext4_lblk_t end;
 	loff_t size, start_off;
@@ -4188,18 +4189,21 @@ ext4_mb_normalize_request(struct ext4_allocation_context *ac,
 	ac->ac_g_ex.fe_len = EXT4_NUM_B2C(sbi, size);
 
 	/* define goal start in order to merge */
-	if (ar->pright && (ar->lright == (start + size))) {
+	if (ar->pright && (ar->lright == (start + size)) &&
+	    ar->pright >= size &&
+	    ar->pright - size >= le32_to_cpu(es->s_first_data_block)) {
 		/* merge to the right */
 		ext4_get_group_no_and_offset(ac->ac_sb, ar->pright - size,
-						&ac->ac_f_ex.fe_group,
-						&ac->ac_f_ex.fe_start);
+						&ac->ac_g_ex.fe_group,
+						&ac->ac_g_ex.fe_start);
 		ac->ac_flags |= EXT4_MB_HINT_TRY_GOAL;
 	}
-	if (ar->pleft && (ar->lleft + 1 == start)) {
+	if (ar->pleft && (ar->lleft + 1 == start) &&
+	    ar->pleft + 1 < ext4_blocks_count(es)) {
 		/* merge to the left */
 		ext4_get_group_no_and_offset(ac->ac_sb, ar->pleft + 1,
-						&ac->ac_f_ex.fe_group,
-						&ac->ac_f_ex.fe_start);
+						&ac->ac_g_ex.fe_group,
+						&ac->ac_g_ex.fe_start);
 		ac->ac_flags |= EXT4_MB_HINT_TRY_GOAL;
 	}
 
-- 
2.39.2

[PATCH AUTOSEL 6.3 26/59] ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()

[Sasha Levin]

From: Ojaswin Mujoo <ojaswin@linux.ibm.com>

[ Upstream commit 93cdf49f6eca5e23f6546b8f28457b2e6a6961d9 ]

When the length of best extent found is less than the length of goal extent
we need to make sure that the best extent atleast covers the start of the
original request. This is done by adjusting the ac_b_ex.fe_logical (logical
start) of the extent.

While doing so, the current logic sometimes results in the best extent's
logical range overflowing the goal extent. Since this best extent is later
added to the inode preallocation list, we have a possibility of introducing
overlapping preallocations. This is discussed in detail here [1].

As per Jan's suggestion, to fix this, replace the existing logic with the
below logic for adjusting best extent as it keeps fragmentation in check
while ensuring logical range of best extent doesn't overflow out of goal
extent:

1. Check if best extent can be kept at end of goal range and still cover
   original start.
2. Else, check if best extent can be kept at start of goal range and still
   cover original start.
3. Else, keep the best extent at start of original request.

Also, add a few extra BUG_ONs that might help catch errors faster.

[1] https://lore.kernel.org/r/Y+OGkVvzPN0RMv0O@li-bb2b2a4c-3307-11b2-a85c-8fa5c3a69313.ibm.com

Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/f96aca6d415b36d1f90db86c1a8cd7e2e9d7ab0e.1679731817.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/mballoc.c | 49 ++++++++++++++++++++++++++++++-----------------
 1 file changed, 31 insertions(+), 18 deletions(-)

diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 0766c5211f6d8..1f95f8d2c02d1 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -4296,6 +4296,7 @@ static void ext4_mb_use_inode_pa(struct ext4_allocation_context *ac,
 	BUG_ON(start < pa->pa_pstart);
 	BUG_ON(end > pa->pa_pstart + EXT4_C2B(sbi, pa->pa_len));
 	BUG_ON(pa->pa_free < len);
+	BUG_ON(ac->ac_b_ex.fe_len <= 0);
 	pa->pa_free -= len;
 
 	mb_debug(ac->ac_sb, "use %llu/%d from inode pa %p\n", start, len, pa);
@@ -4620,10 +4621,8 @@ ext4_mb_new_inode_pa(struct ext4_allocation_context *ac)
 	pa = ac->ac_pa;
 
 	if (ac->ac_b_ex.fe_len < ac->ac_g_ex.fe_len) {
-		int winl;
-		int wins;
-		int win;
-		int offs;
+		int new_bex_start;
+		int new_bex_end;
 
 		/* we can't allocate as much as normalizer wants.
 		 * so, found space must get proper lstart
@@ -4631,26 +4630,40 @@ ext4_mb_new_inode_pa(struct ext4_allocation_context *ac)
 		BUG_ON(ac->ac_g_ex.fe_logical > ac->ac_o_ex.fe_logical);
 		BUG_ON(ac->ac_g_ex.fe_len < ac->ac_o_ex.fe_len);
 
-		/* we're limited by original request in that
-		 * logical block must be covered any way
-		 * winl is window we can move our chunk within */
-		winl = ac->ac_o_ex.fe_logical - ac->ac_g_ex.fe_logical;
+		/*
+		 * Use the below logic for adjusting best extent as it keeps
+		 * fragmentation in check while ensuring logical range of best
+		 * extent doesn't overflow out of goal extent:
+		 *
+		 * 1. Check if best ex can be kept at end of goal and still
+		 *    cover original start
+		 * 2. Else, check if best ex can be kept at start of goal and
+		 *    still cover original start
+		 * 3. Else, keep the best ex at start of original request.
+		 */
+		new_bex_end = ac->ac_g_ex.fe_logical +
+			EXT4_C2B(sbi, ac->ac_g_ex.fe_len);
+		new_bex_start = new_bex_end - EXT4_C2B(sbi, ac->ac_b_ex.fe_len);
+		if (ac->ac_o_ex.fe_logical >= new_bex_start)
+			goto adjust_bex;
 
-		/* also, we should cover whole original request */
-		wins = EXT4_C2B(sbi, ac->ac_b_ex.fe_len - ac->ac_o_ex.fe_len);
+		new_bex_start = ac->ac_g_ex.fe_logical;
+		new_bex_end =
+			new_bex_start + EXT4_C2B(sbi, ac->ac_b_ex.fe_len);
+		if (ac->ac_o_ex.fe_logical < new_bex_end)
+			goto adjust_bex;
 
-		/* the smallest one defines real window */
-		win = min(winl, wins);
+		new_bex_start = ac->ac_o_ex.fe_logical;
+		new_bex_end =
+			new_bex_start + EXT4_C2B(sbi, ac->ac_b_ex.fe_len);
 
-		offs = ac->ac_o_ex.fe_logical %
-			EXT4_C2B(sbi, ac->ac_b_ex.fe_len);
-		if (offs && offs < win)
-			win = offs;
+adjust_bex:
+		ac->ac_b_ex.fe_logical = new_bex_start;
 
-		ac->ac_b_ex.fe_logical = ac->ac_o_ex.fe_logical -
-			EXT4_NUM_B2C(sbi, win);
 		BUG_ON(ac->ac_o_ex.fe_logical < ac->ac_b_ex.fe_logical);
 		BUG_ON(ac->ac_o_ex.fe_len > ac->ac_b_ex.fe_len);
+		BUG_ON(new_bex_end > (ac->ac_g_ex.fe_logical +
+				      EXT4_C2B(sbi, ac->ac_g_ex.fe_len)));
 	}
 
 	/* preallocation can change ac_b_ex, thus we store actually
-- 
2.39.2

[PATCH AUTOSEL 6.3 27/59] crypto: jitter - permanent and intermittent health errors

[Sasha Levin]

From: Stephan Müller <smueller@chronox.de>

[ Upstream commit 3fde2fe99aa6dacd4151c87382b07ce7f30f0a52 ]

According to SP800-90B, two health failures are allowed: the intermittend
and the permanent failure. So far, only the intermittent failure was
implemented. The permanent failure was achieved by resetting the entire
entropy source including its health test state and waiting for two or
more back-to-back health errors.

This approach is appropriate for RCT, but not for APT as APT has a
non-linear cutoff value. Thus, this patch implements 2 cutoff values
for both RCT/APT. This implies that the health state is left untouched
when an intermittent failure occurs. The noise source is reset
and a new APT powerup-self test is performed. Yet, whith the unchanged
health test state, the counting of failures continues until a permanent
failure is reached.

Any non-failing raw entropy value causes the health tests to reset.

The intermittent error has an unchanged significance level of 2^-30.
The permanent error has a significance level of 2^-60. Considering that
this level also indicates a false-positive rate (see SP800-90B section 4.2)
a false-positive must only be incurred with a low probability when
considering a fleet of Linux kernels as a whole. Hitting the permanent
error may cause a panic(), the following calculation applies: Assuming
that a fleet of 10^9 Linux kernels run concurrently with this patch in
FIPS mode and on each kernel 2 health tests are performed every minute
for one year, the chances of a false positive is about 1:1000
based on the binomial distribution.

In addition, any power-up health test errors triggered with
jent_entropy_init are treated as permanent errors.

A permanent failure causes the entire entropy source to permanently
return an error. This implies that a caller can only remedy the situation
by re-allocating a new instance of the Jitter RNG. In a subsequent
patch, a transparent re-allocation will be provided which also changes
the implied heuristic entropy assessment.

In addition, when the kernel is booted with fips=1, the Jitter RNG
is defined to be part of a FIPS module. The permanent error of the
Jitter RNG is translated as a FIPS module error. In this case, the entire
FIPS module must cease operation. This is implemented in the kernel by
invoking panic().

The patch also fixes an off-by-one in the RCT cutoff value which is now
set to 30 instead of 31. This is because the counting of the values
starts with 0.

Reviewed-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Reviewed-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/jitterentropy-kcapi.c |  51 ++++++-------
 crypto/jitterentropy.c       | 144 +++++++++++++----------------------
 crypto/jitterentropy.h       |   1 -
 3 files changed, 76 insertions(+), 120 deletions(-)

diff --git a/crypto/jitterentropy-kcapi.c b/crypto/jitterentropy-kcapi.c
index 2d115bec15aeb..b9edfaa51b273 100644
--- a/crypto/jitterentropy-kcapi.c
+++ b/crypto/jitterentropy-kcapi.c
@@ -37,6 +37,7 @@
  * DAMAGE.
  */
 
+#include <linux/fips.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -59,11 +60,6 @@ void jent_zfree(void *ptr)
 	kfree_sensitive(ptr);
 }
 
-void jent_panic(char *s)
-{
-	panic("%s", s);
-}
-
 void jent_memcpy(void *dest, const void *src, unsigned int n)
 {
 	memcpy(dest, src, n);
@@ -102,7 +98,6 @@ void jent_get_nstime(__u64 *out)
 struct jitterentropy {
 	spinlock_t jent_lock;
 	struct rand_data *entropy_collector;
-	unsigned int reset_cnt;
 };
 
 static int jent_kcapi_init(struct crypto_tfm *tfm)
@@ -138,32 +133,30 @@ static int jent_kcapi_random(struct crypto_rng *tfm,
 
 	spin_lock(&rng->jent_lock);
 
-	/* Return a permanent error in case we had too many resets in a row. */
-	if (rng->reset_cnt > (1<<10)) {
-		ret = -EFAULT;
-		goto out;
-	}
-
 	ret = jent_read_entropy(rng->entropy_collector, rdata, dlen);
 
-	/* Reset RNG in case of health failures */
-	if (ret < -1) {
-		pr_warn_ratelimited("Reset Jitter RNG due to health test failure: %s failure\n",
-				    (ret == -2) ? "Repetition Count Test" :
-						  "Adaptive Proportion Test");
-
-		rng->reset_cnt++;
-
+	if (ret == -3) {
+		/* Handle permanent health test error */
+		/*
+		 * If the kernel was booted with fips=1, it implies that
+		 * the entire kernel acts as a FIPS 140 module. In this case
+		 * an SP800-90B permanent health test error is treated as
+		 * a FIPS module error.
+		 */
+		if (fips_enabled)
+			panic("Jitter RNG permanent health test failure\n");
+
+		pr_err("Jitter RNG permanent health test failure\n");
+		ret = -EFAULT;
+	} else if (ret == -2) {
+		/* Handle intermittent health test error */
+		pr_warn_ratelimited("Reset Jitter RNG due to intermittent health test failure\n");
 		ret = -EAGAIN;
-	} else {
-		rng->reset_cnt = 0;
-
-		/* Convert the Jitter RNG error into a usable error code */
-		if (ret == -1)
-			ret = -EINVAL;
+	} else if (ret == -1) {
+		/* Handle other errors */
+		ret = -EINVAL;
 	}
 
-out:
 	spin_unlock(&rng->jent_lock);
 
 	return ret;
@@ -197,6 +190,10 @@ static int __init jent_mod_init(void)
 
 	ret = jent_entropy_init();
 	if (ret) {
+		/* Handle permanent health test error */
+		if (fips_enabled)
+			panic("jitterentropy: Initialization failed with host not compliant with requirements: %d\n", ret);
+
 		pr_info("jitterentropy: Initialization failed with host not compliant with requirements: %d\n", ret);
 		return -EFAULT;
 	}
diff --git a/crypto/jitterentropy.c b/crypto/jitterentropy.c
index 93bff32138238..22f48bf4c6f57 100644
--- a/crypto/jitterentropy.c
+++ b/crypto/jitterentropy.c
@@ -85,10 +85,14 @@ struct rand_data {
 				      * bit generation */
 
 	/* Repetition Count Test */
-	int rct_count;			/* Number of stuck values */
+	unsigned int rct_count;			/* Number of stuck values */
 
-	/* Adaptive Proportion Test for a significance level of 2^-30 */
+	/* Intermittent health test failure threshold of 2^-30 */
+#define JENT_RCT_CUTOFF		30	/* Taken from SP800-90B sec 4.4.1 */
 #define JENT_APT_CUTOFF		325	/* Taken from SP800-90B sec 4.4.2 */
+	/* Permanent health test failure threshold of 2^-60 */
+#define JENT_RCT_CUTOFF_PERMANENT	60
+#define JENT_APT_CUTOFF_PERMANENT	355
 #define JENT_APT_WINDOW_SIZE	512	/* Data window size */
 	/* LSB of time stamp to process */
 #define JENT_APT_LSB		16
@@ -97,8 +101,6 @@ struct rand_data {
 	unsigned int apt_count;		/* APT counter */
 	unsigned int apt_base;		/* APT base reference */
 	unsigned int apt_base_set:1;	/* APT base reference set? */
-
-	unsigned int health_failure:1;	/* Permanent health failure */
 };
 
 /* Flags that can be used to initialize the RNG */
@@ -169,19 +171,26 @@ static void jent_apt_insert(struct rand_data *ec, unsigned int delta_masked)
 		return;
 	}
 
-	if (delta_masked == ec->apt_base) {
+	if (delta_masked == ec->apt_base)
 		ec->apt_count++;
 
-		if (ec->apt_count >= JENT_APT_CUTOFF)
-			ec->health_failure = 1;
-	}
-
 	ec->apt_observations++;
 
 	if (ec->apt_observations >= JENT_APT_WINDOW_SIZE)
 		jent_apt_reset(ec, delta_masked);
 }
 
+/* APT health test failure detection */
+static int jent_apt_permanent_failure(struct rand_data *ec)
+{
+	return (ec->apt_count >= JENT_APT_CUTOFF_PERMANENT) ? 1 : 0;
+}
+
+static int jent_apt_failure(struct rand_data *ec)
+{
+	return (ec->apt_count >= JENT_APT_CUTOFF) ? 1 : 0;
+}
+
 /***************************************************************************
  * Stuck Test and its use as Repetition Count Test
  *
@@ -206,55 +215,14 @@ static void jent_apt_insert(struct rand_data *ec, unsigned int delta_masked)
  */
 static void jent_rct_insert(struct rand_data *ec, int stuck)
 {
-	/*
-	 * If we have a count less than zero, a previous RCT round identified
-	 * a failure. We will not overwrite it.
-	 */
-	if (ec->rct_count < 0)
-		return;
-
 	if (stuck) {
 		ec->rct_count++;
-
-		/*
-		 * The cutoff value is based on the following consideration:
-		 * alpha = 2^-30 as recommended in FIPS 140-2 IG 9.8.
-		 * In addition, we require an entropy value H of 1/OSR as this
-		 * is the minimum entropy required to provide full entropy.
-		 * Note, we collect 64 * OSR deltas for inserting them into
-		 * the entropy pool which should then have (close to) 64 bits
-		 * of entropy.
-		 *
-		 * Note, ec->rct_count (which equals to value B in the pseudo
-		 * code of SP800-90B section 4.4.1) starts with zero. Hence
-		 * we need to subtract one from the cutoff value as calculated
-		 * following SP800-90B.
-		 */
-		if ((unsigned int)ec->rct_count >= (31 * ec->osr)) {
-			ec->rct_count = -1;
-			ec->health_failure = 1;
-		}
 	} else {
+		/* Reset RCT */
 		ec->rct_count = 0;
 	}
 }
 
-/*
- * Is there an RCT health test failure?
- *
- * @ec [in] Reference to entropy collector
- *
- * @return
- * 	0 No health test failure
- * 	1 Permanent health test failure
- */
-static int jent_rct_failure(struct rand_data *ec)
-{
-	if (ec->rct_count < 0)
-		return 1;
-	return 0;
-}
-
 static inline __u64 jent_delta(__u64 prev, __u64 next)
 {
 #define JENT_UINT64_MAX		(__u64)(~((__u64) 0))
@@ -303,18 +271,26 @@ static int jent_stuck(struct rand_data *ec, __u64 current_delta)
 	return 0;
 }
 
-/*
- * Report any health test failures
- *
- * @ec [in] Reference to entropy collector
- *
- * @return
- * 	0 No health test failure
- * 	1 Permanent health test failure
- */
+/* RCT health test failure detection */
+static int jent_rct_permanent_failure(struct rand_data *ec)
+{
+	return (ec->rct_count >= JENT_RCT_CUTOFF_PERMANENT) ? 1 : 0;
+}
+
+static int jent_rct_failure(struct rand_data *ec)
+{
+	return (ec->rct_count >= JENT_RCT_CUTOFF) ? 1 : 0;
+}
+
+/* Report of health test failures */
 static int jent_health_failure(struct rand_data *ec)
 {
-	return ec->health_failure;
+	return jent_rct_failure(ec) | jent_apt_failure(ec);
+}
+
+static int jent_permanent_health_failure(struct rand_data *ec)
+{
+	return jent_rct_permanent_failure(ec) | jent_apt_permanent_failure(ec);
 }
 
 /***************************************************************************
@@ -600,8 +576,8 @@ static void jent_gen_entropy(struct rand_data *ec)
  *
  * The following error codes can occur:
  *	-1	entropy_collector is NULL
- *	-2	RCT failed
- *	-3	APT test failed
+ *	-2	Intermittent health failure
+ *	-3	Permanent health failure
  */
 int jent_read_entropy(struct rand_data *ec, unsigned char *data,
 		      unsigned int len)
@@ -616,39 +592,23 @@ int jent_read_entropy(struct rand_data *ec, unsigned char *data,
 
 		jent_gen_entropy(ec);
 
-		if (jent_health_failure(ec)) {
-			int ret;
-
-			if (jent_rct_failure(ec))
-				ret = -2;
-			else
-				ret = -3;
-
+		if (jent_permanent_health_failure(ec)) {
 			/*
-			 * Re-initialize the noise source
-			 *
-			 * If the health test fails, the Jitter RNG remains
-			 * in failure state and will return a health failure
-			 * during next invocation.
+			 * At this point, the Jitter RNG instance is considered
+			 * as a failed instance. There is no rerun of the
+			 * startup test any more, because the caller
+			 * is assumed to not further use this instance.
 			 */
-			if (jent_entropy_init())
-				return ret;
-
-			/* Set APT to initial state */
-			jent_apt_reset(ec, 0);
-			ec->apt_base_set = 0;
-
-			/* Set RCT to initial state */
-			ec->rct_count = 0;
-
-			/* Re-enable Jitter RNG */
-			ec->health_failure = 0;
-
+			return -3;
+		} else if (jent_health_failure(ec)) {
 			/*
-			 * Return the health test failure status to the
-			 * caller as the generated value is not appropriate.
+			 * Perform startup health tests and return permanent
+			 * error if it fails.
 			 */
-			return ret;
+			if (jent_entropy_init())
+				return -3;
+
+			return -2;
 		}
 
 		if ((DATA_SIZE_BITS / 8) < len)
diff --git a/crypto/jitterentropy.h b/crypto/jitterentropy.h
index b7397b617ef05..5cc583f6bc6b8 100644
--- a/crypto/jitterentropy.h
+++ b/crypto/jitterentropy.h
@@ -2,7 +2,6 @@
 
 extern void *jent_zalloc(unsigned int len);
 extern void jent_zfree(void *ptr);
-extern void jent_panic(char *s);
 extern void jent_memcpy(void *dest, const void *src, unsigned int n);
 extern void jent_get_nstime(__u64 *out);
 
-- 
2.39.2

[PATCH AUTOSEL 6.3 28/59] f2fs: Fix system crash due to lack of free space in LFS

[Sasha Levin]

From: Yonggil Song <yonggil.song@samsung.com>

[ Upstream commit d11cef14f8146f3babd286c2cc8ca09c166295e2 ]

When f2fs tries to checkpoint during foreground gc in LFS mode, system
crash occurs due to lack of free space if the amount of dirty node and
dentry pages generated by data migration exceeds free space.
The reproduction sequence is as follows.

 - 20GiB capacity block device (null_blk)
 - format and mount with LFS mode
 - create a file and write 20,000MiB
 - 4k random write on full range of the file

 RIP: 0010:new_curseg+0x48a/0x510 [f2fs]
 Code: 55 e7 f5 89 c0 48 0f af c3 48 8b 5d c0 48 c1 e8 20 83 c0 01 89 43 6c 48 83 c4 28 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc <0f> 0b f0 41 80 4f 48 04 45 85 f6 0f 84 ba fd ff ff e9 ef fe ff ff
 RSP: 0018:ffff977bc397b218 EFLAGS: 00010246
 RAX: 00000000000027b9 RBX: 0000000000000000 RCX: 00000000000027c0
 RDX: 0000000000000000 RSI: 00000000000027b9 RDI: ffff8c25ab4e74f8
 RBP: ffff977bc397b268 R08: 00000000000027b9 R09: ffff8c29e4a34b40
 R10: 0000000000000001 R11: ffff977bc397b0d8 R12: 0000000000000000
 R13: ffff8c25b4dd81a0 R14: 0000000000000000 R15: ffff8c2f667f9000
 FS: 0000000000000000(0000) GS:ffff8c344ec80000(0000) knlGS:0000000000000000
 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000000c00055d000 CR3: 0000000e30810003 CR4: 00000000003706e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
 <TASK>
 allocate_segment_by_default+0x9c/0x110 [f2fs]
 f2fs_allocate_data_block+0x243/0xa30 [f2fs]
 ? __mod_lruvec_page_state+0xa0/0x150
 do_write_page+0x80/0x160 [f2fs]
 f2fs_do_write_node_page+0x32/0x50 [f2fs]
 __write_node_page+0x339/0x730 [f2fs]
 f2fs_sync_node_pages+0x5a6/0x780 [f2fs]
 block_operations+0x257/0x340 [f2fs]
 f2fs_write_checkpoint+0x102/0x1050 [f2fs]
 f2fs_gc+0x27c/0x630 [f2fs]
 ? folio_mark_dirty+0x36/0x70
 f2fs_balance_fs+0x16f/0x180 [f2fs]

This patch adds checking whether free sections are enough before checkpoint
during gc.

Signed-off-by: Yonggil Song <yonggil.song@samsung.com>
[Jaegeuk Kim: code clean-up]
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/gc.c      | 10 ++++++++--
 fs/f2fs/gc.h      |  2 ++
 fs/f2fs/segment.h | 39 ++++++++++++++++++++++++++++++---------
 3 files changed, 40 insertions(+), 11 deletions(-)

diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c
index 0a9dfa4598606..562f4141d10f6 100644
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -1779,6 +1779,7 @@ int f2fs_gc(struct f2fs_sb_info *sbi, struct f2fs_gc_control *gc_control)
 		.iroot = RADIX_TREE_INIT(gc_list.iroot, GFP_NOFS),
 	};
 	unsigned int skipped_round = 0, round = 0;
+	unsigned int upper_secs;
 
 	trace_f2fs_gc_begin(sbi->sb, gc_type, gc_control->no_bg_gc,
 				gc_control->nr_free_secs,
@@ -1864,8 +1865,13 @@ int f2fs_gc(struct f2fs_sb_info *sbi, struct f2fs_gc_control *gc_control)
 		}
 	}
 
-	/* Write checkpoint to reclaim prefree segments */
-	if (free_sections(sbi) < NR_CURSEG_PERSIST_TYPE &&
+	__get_secs_required(sbi, NULL, &upper_secs, NULL);
+
+	/*
+	 * Write checkpoint to reclaim prefree segments.
+	 * We need more three extra sections for writer's data/node/dentry.
+	 */
+	if (free_sections(sbi) <= upper_secs + NR_GC_CHECKPOINT_SECS &&
 				prefree_segments(sbi)) {
 		ret = f2fs_write_checkpoint(sbi, &cpc);
 		if (ret)
diff --git a/fs/f2fs/gc.h b/fs/f2fs/gc.h
index 15bd1d680f677..7260788630b32 100644
--- a/fs/f2fs/gc.h
+++ b/fs/f2fs/gc.h
@@ -30,6 +30,8 @@
 /* Search max. number of dirty segments to select a victim segment */
 #define DEF_MAX_VICTIM_SEARCH 4096 /* covers 8GB */
 
+#define NR_GC_CHECKPOINT_SECS (3)	/* data/node/dentry sections */
+
 struct f2fs_gc_kthread {
 	struct task_struct *f2fs_gc_task;
 	wait_queue_head_t gc_wait_queue_head;
diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index efdb7fc3b7975..599b87d878f6f 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -599,8 +599,12 @@ static inline bool has_curseg_enough_space(struct f2fs_sb_info *sbi,
 	return true;
 }
 
-static inline bool has_not_enough_free_secs(struct f2fs_sb_info *sbi,
-					int freed, int needed)
+/*
+ * calculate needed sections for dirty node/dentry
+ * and call has_curseg_enough_space
+ */
+static inline void __get_secs_required(struct f2fs_sb_info *sbi,
+		unsigned int *lower_p, unsigned int *upper_p, bool *curseg_p)
 {
 	unsigned int total_node_blocks = get_pages(sbi, F2FS_DIRTY_NODES) +
 					get_pages(sbi, F2FS_DIRTY_DENTS) +
@@ -610,20 +614,37 @@ static inline bool has_not_enough_free_secs(struct f2fs_sb_info *sbi,
 	unsigned int dent_secs = total_dent_blocks / CAP_BLKS_PER_SEC(sbi);
 	unsigned int node_blocks = total_node_blocks % CAP_BLKS_PER_SEC(sbi);
 	unsigned int dent_blocks = total_dent_blocks % CAP_BLKS_PER_SEC(sbi);
-	unsigned int free, need_lower, need_upper;
+
+	if (lower_p)
+		*lower_p = node_secs + dent_secs;
+	if (upper_p)
+		*upper_p = node_secs + dent_secs +
+			(node_blocks ? 1 : 0) + (dent_blocks ? 1 : 0);
+	if (curseg_p)
+		*curseg_p = has_curseg_enough_space(sbi,
+				node_blocks, dent_blocks);
+}
+
+static inline bool has_not_enough_free_secs(struct f2fs_sb_info *sbi,
+					int freed, int needed)
+{
+	unsigned int free_secs, lower_secs, upper_secs;
+	bool curseg_space;
 
 	if (unlikely(is_sbi_flag_set(sbi, SBI_POR_DOING)))
 		return false;
 
-	free = free_sections(sbi) + freed;
-	need_lower = node_secs + dent_secs + reserved_sections(sbi) + needed;
-	need_upper = need_lower + (node_blocks ? 1 : 0) + (dent_blocks ? 1 : 0);
+	__get_secs_required(sbi, &lower_secs, &upper_secs, &curseg_space);
+
+	free_secs = free_sections(sbi) + freed;
+	lower_secs += needed + reserved_sections(sbi);
+	upper_secs += needed + reserved_sections(sbi);
 
-	if (free > need_upper)
+	if (free_secs > upper_secs)
 		return false;
-	else if (free <= need_lower)
+	else if (free_secs <= lower_secs)
 		return true;
-	return !has_curseg_enough_space(sbi, node_blocks, dent_blocks);
+	return !curseg_space;
 }
 
 static inline bool f2fs_is_checkpoint_ready(struct f2fs_sb_info *sbi)
-- 
2.39.2

[PATCH AUTOSEL 6.3 29/59] f2fs: fix to drop all dirty pages during umount() if cp_error is set

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit c9b3649a934d131151111354bcbb638076f03a30 ]

xfstest generic/361 reports a bug as below:

f2fs_bug_on(sbi, sbi->fsync_node_num);

kernel BUG at fs/f2fs/super.c:1627!
RIP: 0010:f2fs_put_super+0x3a8/0x3b0
Call Trace:
 generic_shutdown_super+0x8c/0x1b0
 kill_block_super+0x2b/0x60
 kill_f2fs_super+0x87/0x110
 deactivate_locked_super+0x39/0x80
 deactivate_super+0x46/0x50
 cleanup_mnt+0x109/0x170
 __cleanup_mnt+0x16/0x20
 task_work_run+0x65/0xa0
 exit_to_user_mode_prepare+0x175/0x190
 syscall_exit_to_user_mode+0x25/0x50
 do_syscall_64+0x4c/0x90
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

During umount(), if cp_error is set, f2fs_wait_on_all_pages() should
not stop waiting all F2FS_WB_CP_DATA pages to be writebacked, otherwise,
fsync_node_num can be non-zero after f2fs_wait_on_all_pages() causing
this bug.

In this case, to avoid deadloop in f2fs_wait_on_all_pages(), it needs
to drop all dirty pages rather than redirtying them.

Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/checkpoint.c | 12 ++++++++++--
 fs/f2fs/data.c       |  3 ++-
 2 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/fs/f2fs/checkpoint.c b/fs/f2fs/checkpoint.c
index c3e058e0a0188..96af24c394c39 100644
--- a/fs/f2fs/checkpoint.c
+++ b/fs/f2fs/checkpoint.c
@@ -325,8 +325,15 @@ static int __f2fs_write_meta_page(struct page *page,
 
 	trace_f2fs_writepage(page, META);
 
-	if (unlikely(f2fs_cp_error(sbi)))
+	if (unlikely(f2fs_cp_error(sbi))) {
+		if (is_sbi_flag_set(sbi, SBI_IS_CLOSE)) {
+			ClearPageUptodate(page);
+			dec_page_count(sbi, F2FS_DIRTY_META);
+			unlock_page(page);
+			return 0;
+		}
 		goto redirty_out;
+	}
 	if (unlikely(is_sbi_flag_set(sbi, SBI_POR_DOING)))
 		goto redirty_out;
 	if (wbc->for_reclaim && page->index < GET_SUM_BLOCK(sbi, 0))
@@ -1306,7 +1313,8 @@ void f2fs_wait_on_all_pages(struct f2fs_sb_info *sbi, int type)
 		if (!get_pages(sbi, type))
 			break;
 
-		if (unlikely(f2fs_cp_error(sbi)))
+		if (unlikely(f2fs_cp_error(sbi) &&
+			!is_sbi_flag_set(sbi, SBI_IS_CLOSE)))
 			break;
 
 		if (type == F2FS_DIRTY_META)
diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index 06b552a0aba23..4677656215db9 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -2798,7 +2798,8 @@ int f2fs_write_single_data_page(struct page *page, int *submitted,
 		 * don't drop any dirty dentry pages for keeping lastest
 		 * directory structure.
 		 */
-		if (S_ISDIR(inode->i_mode))
+		if (S_ISDIR(inode->i_mode) &&
+				!is_sbi_flag_set(sbi, SBI_IS_CLOSE))
 			goto redirty_out;
 		goto out;
 	}
-- 
2.39.2

[PATCH AUTOSEL 6.3 30/59] f2fs: fix to check readonly condition correctly

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit d78dfefcde9d311284434560d69c0478c55a657e ]

With below case, it can mount multi-device image w/ rw option, however
one of secondary device is set as ro, later update will cause panic, so
let's introduce f2fs_dev_is_readonly(), and check multi-devices rw status
in f2fs_remount() w/ it in order to avoid such inconsistent mount status.

mkfs.f2fs -c /dev/zram1 /dev/zram0 -f
blockdev --setro /dev/zram1
mount -t f2fs dev/zram0 /mnt/f2fs
mount: /mnt/f2fs: WARNING: source write-protected, mounted read-only.
mount -t f2fs -o remount,rw mnt/f2fs
dd if=/dev/zero  of=/mnt/f2fs/file bs=1M count=8192

kernel BUG at fs/f2fs/inline.c:258!
RIP: 0010:f2fs_write_inline_data+0x23e/0x2d0 [f2fs]
Call Trace:
  f2fs_write_single_data_page+0x26b/0x9f0 [f2fs]
  f2fs_write_cache_pages+0x389/0xa60 [f2fs]
  __f2fs_write_data_pages+0x26b/0x2d0 [f2fs]
  f2fs_write_data_pages+0x2e/0x40 [f2fs]
  do_writepages+0xd3/0x1b0
  __writeback_single_inode+0x5b/0x420
  writeback_sb_inodes+0x236/0x5a0
  __writeback_inodes_wb+0x56/0xf0
  wb_writeback+0x2a3/0x490
  wb_do_writeback+0x2b2/0x330
  wb_workfn+0x6a/0x260
  process_one_work+0x270/0x5e0
  worker_thread+0x52/0x3e0
  kthread+0xf4/0x120
  ret_from_fork+0x29/0x50

Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/f2fs.h  | 5 +++++
 fs/f2fs/super.c | 2 +-
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index b0ab2062038a0..bef2641543e3f 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -4462,6 +4462,11 @@ static inline bool f2fs_hw_is_readonly(struct f2fs_sb_info *sbi)
 	return false;
 }
 
+static inline bool f2fs_dev_is_readonly(struct f2fs_sb_info *sbi)
+{
+	return f2fs_sb_has_readonly(sbi) || f2fs_hw_is_readonly(sbi);
+}
+
 static inline bool f2fs_lfs_mode(struct f2fs_sb_info *sbi)
 {
 	return F2FS_OPTION(sbi).fs_mode == FS_MODE_LFS;
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index fbaaabbcd6de7..15716884c787f 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -2274,7 +2274,7 @@ static int f2fs_remount(struct super_block *sb, int *flags, char *data)
 	if (f2fs_readonly(sb) && (*flags & SB_RDONLY))
 		goto skip;
 
-	if (f2fs_sb_has_readonly(sbi) && !(*flags & SB_RDONLY)) {
+	if (f2fs_dev_is_readonly(sbi) && !(*flags & SB_RDONLY)) {
 		err = -EROFS;
 		goto restore_opts;
 	}
-- 
2.39.2

[PATCH AUTOSEL 6.3 31/59] samples/bpf: Fix fout leak in hbm's run_bpf_prog

[Sasha Levin]

From: Hao Zeng <zenghao@kylinos.cn>

[ Upstream commit 23acb14af1914010dd0aae1bbb7fab28bf518b8e ]

Fix fout being fopen'ed but then not subsequently fclose'd. In the affected
branch, fout is otherwise going out of scope.

Signed-off-by: Hao Zeng <zenghao@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230411084349.1999628-1-zenghao@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 samples/bpf/hbm.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/samples/bpf/hbm.c b/samples/bpf/hbm.c
index 516fbac28b716..7f89700a17b69 100644
--- a/samples/bpf/hbm.c
+++ b/samples/bpf/hbm.c
@@ -315,6 +315,7 @@ static int run_bpf_prog(char *prog, int cg_id)
 		fout = fopen(fname, "w");
 		fprintf(fout, "id:%d\n", cg_id);
 		fprintf(fout, "ERROR: Could not lookup queue_stats\n");
+		fclose(fout);
 	} else if (stats_flag && qstats.lastPacketTime >
 		   qstats.firstPacketTime) {
 		long long delta_us = (qstats.lastPacketTime -
-- 
2.39.2

[PATCH AUTOSEL 6.3 32/59] bpf: Add preempt_count_{sub,add} into btf id deny list

[Sasha Levin]

From: Yafang <laoar.shao@gmail.com>

[ Upstream commit c11bd046485d7bf1ca200db0e7d0bdc4bafdd395 ]

The recursion check in __bpf_prog_enter* and __bpf_prog_exit*
leave preempt_count_{sub,add} unprotected. When attaching trampoline to
them we get panic as follows,

[  867.843050] BUG: TASK stack guard page was hit at 0000000009d325cf (stack is 0000000046a46a15..00000000537e7b28)
[  867.843064] stack guard page: 0000 [#1] PREEMPT SMP NOPTI
[  867.843067] CPU: 8 PID: 11009 Comm: trace Kdump: loaded Not tainted 6.2.0+ #4
[  867.843100] Call Trace:
[  867.843101]  <TASK>
[  867.843104]  asm_exc_int3+0x3a/0x40
[  867.843108] RIP: 0010:preempt_count_sub+0x1/0xa0
[  867.843135]  __bpf_prog_enter_recur+0x17/0x90
[  867.843148]  bpf_trampoline_6442468108_0+0x2e/0x1000
[  867.843154]  ? preempt_count_sub+0x1/0xa0
[  867.843157]  preempt_count_sub+0x5/0xa0
[  867.843159]  ? migrate_enable+0xac/0xf0
[  867.843164]  __bpf_prog_exit_recur+0x2d/0x40
[  867.843168]  bpf_trampoline_6442468108_0+0x55/0x1000
...
[  867.843788]  preempt_count_sub+0x5/0xa0
[  867.843793]  ? migrate_enable+0xac/0xf0
[  867.843829]  __bpf_prog_exit_recur+0x2d/0x40
[  867.843837] BUG: IRQ stack guard page was hit at 0000000099bd8228 (stack is 00000000b23e2bc4..000000006d95af35)
[  867.843841] BUG: IRQ stack guard page was hit at 000000005ae07924 (stack is 00000000ffd69623..0000000014eb594c)
[  867.843843] BUG: IRQ stack guard page was hit at 00000000028320f0 (stack is 00000000034b6438..0000000078d1bcec)
[  867.843842]  bpf_trampoline_6442468108_0+0x55/0x1000
...

That is because in __bpf_prog_exit_recur, the preempt_count_{sub,add} are
called after prog->active is decreased.

Fixing this by adding these two functions into btf ids deny list.

Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Yafang <laoar.shao@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20230413025248.79764-1-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/verifier.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 767e8930b0bd5..d8a01180ddf76 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -17551,6 +17551,10 @@ BTF_ID(func, migrate_enable)
 #if !defined CONFIG_PREEMPT_RCU && !defined CONFIG_TINY_RCU
 BTF_ID(func, rcu_read_unlock_strict)
 #endif
+#if defined(CONFIG_DEBUG_PREEMPT) || defined(CONFIG_TRACE_PREEMPT_TOGGLE)
+BTF_ID(func, preempt_count_add)
+BTF_ID(func, preempt_count_sub)
+#endif
 BTF_SET_END(btf_id_deny)
 
 static bool can_be_sleepable(struct bpf_prog *prog)
-- 
2.39.2

[PATCH AUTOSEL 6.3 33/59] md: fix soft lockup in status_resync

[Sasha Levin]

From: Yu Kuai <yukuai3@huawei.com>

[ Upstream commit 6efddf1e32e2a264694766ca485a4f5e04ee82a7 ]

status_resync() will calculate 'curr_resync - recovery_active' to show
user a progress bar like following:

[============>........]  resync = 61.4%

'curr_resync' and 'recovery_active' is updated in md_do_sync(), and
status_resync() can read them concurrently, hence it's possible that
'curr_resync - recovery_active' can overflow to a huge number. In this
case status_resync() will be stuck in the loop to print a large amount
of '=', which will end up soft lockup.

Fix the problem by setting 'resync' to MD_RESYNC_ACTIVE in this case,
this way resync in progress will be reported to user.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230310073855.1337560-3-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 13321dbb5fbcf..d479e1656ef33 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -8029,16 +8029,16 @@ static int status_resync(struct seq_file *seq, struct mddev *mddev)
 	} else if (resync > max_sectors) {
 		resync = max_sectors;
 	} else {
-		resync -= atomic_read(&mddev->recovery_active);
-		if (resync < MD_RESYNC_ACTIVE) {
-			/*
-			 * Resync has started, but the subtraction has
-			 * yielded one of the special values. Force it
-			 * to active to ensure the status reports an
-			 * active resync.
-			 */
+		res = atomic_read(&mddev->recovery_active);
+		/*
+		 * Resync has started, but the subtraction has overflowed or
+		 * yielded one of the special values. Force it to active to
+		 * ensure the status reports an active resync.
+		 */
+		if (resync < res || resync - res < MD_RESYNC_ACTIVE)
 			resync = MD_RESYNC_ACTIVE;
-		}
+		else
+			resync -= res;
 	}
 
 	if (resync == MD_RESYNC_NONE) {
-- 
2.39.2

[PATCH AUTOSEL 6.3 34/59] net/sched: pass netlink extack to mqprio and taprio offload

[Sasha Levin]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit c54876cd5961ce0f8e74807f79a6739cd6b35ddf ]

With the multiplexed ndo_setup_tc() model which lacks a first-class
struct netlink_ext_ack * argument, the only way to pass the netlink
extended ACK message down to the device driver is to embed it within the
offload structure.

Do this for struct tc_mqprio_qopt_offload and struct tc_taprio_qopt_offload.

Since struct tc_taprio_qopt_offload also contains a tc_mqprio_qopt_offload
structure, and since device drivers might effectively reuse their mqprio
implementation for the mqprio portion of taprio, we make taprio set the
extack in both offload structures to point at the same netlink extack
message.

In fact, the taprio handling is a bit more tricky, for 2 reasons.

First is because the offload structure has a longer lifetime than the
extack structure. The driver is supposed to populate the extack
synchronously from ndo_setup_tc() and leave it alone afterwards.
To not have any use-after-free surprises, we zero out the extack pointer
when we leave taprio_enable_offload().

The second reason is because taprio does overwrite the extack message on
ndo_setup_tc() error. We need to switch to the weak form of setting an
extack message, which preserves a potential message set by the driver.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/pkt_sched.h |  2 ++
 net/sched/sch_mqprio.c  |  5 ++++-
 net/sched/sch_taprio.c  | 12 ++++++++++--
 3 files changed, 16 insertions(+), 3 deletions(-)

diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h
index 2016839991a42..fc688c7e95951 100644
--- a/include/net/pkt_sched.h
+++ b/include/net/pkt_sched.h
@@ -167,6 +167,7 @@ struct tc_mqprio_caps {
 struct tc_mqprio_qopt_offload {
 	/* struct tc_mqprio_qopt must always be the first element */
 	struct tc_mqprio_qopt qopt;
+	struct netlink_ext_ack *extack;
 	u16 mode;
 	u16 shaper;
 	u32 flags;
@@ -194,6 +195,7 @@ struct tc_taprio_sched_entry {
 
 struct tc_taprio_qopt_offload {
 	struct tc_mqprio_qopt_offload mqprio;
+	struct netlink_ext_ack *extack;
 	u8 enable;
 	ktime_t base_time;
 	u64 cycle_time;
diff --git a/net/sched/sch_mqprio.c b/net/sched/sch_mqprio.c
index 48ed87b91086e..fc6225f15fcdb 100644
--- a/net/sched/sch_mqprio.c
+++ b/net/sched/sch_mqprio.c
@@ -33,9 +33,12 @@ static int mqprio_enable_offload(struct Qdisc *sch,
 				 const struct tc_mqprio_qopt *qopt,
 				 struct netlink_ext_ack *extack)
 {
-	struct tc_mqprio_qopt_offload mqprio = {.qopt = *qopt};
 	struct mqprio_sched *priv = qdisc_priv(sch);
 	struct net_device *dev = qdisc_dev(sch);
+	struct tc_mqprio_qopt_offload mqprio = {
+		.qopt = *qopt,
+		.extack = extack,
+	};
 	int err, i;
 
 	switch (priv->mode) {
diff --git a/net/sched/sch_taprio.c b/net/sched/sch_taprio.c
index 1f469861eae32..cbad430191721 100644
--- a/net/sched/sch_taprio.c
+++ b/net/sched/sch_taprio.c
@@ -1520,7 +1520,9 @@ static int taprio_enable_offload(struct net_device *dev,
 		return -ENOMEM;
 	}
 	offload->enable = 1;
+	offload->extack = extack;
 	mqprio_qopt_reconstruct(dev, &offload->mqprio.qopt);
+	offload->mqprio.extack = extack;
 	taprio_sched_to_offload(dev, sched, offload, &caps);
 
 	for (tc = 0; tc < TC_MAX_QUEUE; tc++)
@@ -1528,14 +1530,20 @@ static int taprio_enable_offload(struct net_device *dev,
 
 	err = ops->ndo_setup_tc(dev, TC_SETUP_QDISC_TAPRIO, offload);
 	if (err < 0) {
-		NL_SET_ERR_MSG(extack,
-			       "Device failed to setup taprio offload");
+		NL_SET_ERR_MSG_WEAK(extack,
+				    "Device failed to setup taprio offload");
 		goto done;
 	}
 
 	q->offloaded = true;
 
 done:
+	/* The offload structure may linger around via a reference taken by the
+	 * device driver, so clear up the netlink extack pointer so that the
+	 * driver isn't tempted to dereference data which stopped being valid
+	 */
+	offload->extack = NULL;
+	offload->mqprio.extack = NULL;
 	taprio_offload_free(offload);
 
 	return err;
-- 
2.39.2

[PATCH AUTOSEL 6.3 35/59] wifi: iwlwifi: pcie: fix possible NULL pointer dereference

[Sasha Levin]

From: Daniel Gabay <daniel.gabay@intel.com>

[ Upstream commit b655b9a9f8467684cfa8906713d33b71ea8c8f54 ]

It is possible that iwl_pci_probe() will fail and free the trans,
then afterwards iwl_pci_remove() will be called and crash by trying
to access trans which is already freed, fix it.

iwlwifi 0000:01:00.0: Detected crf-id 0xa5a5a5a2, cnv-id 0xa5a5a5a2
		      wfpm id 0xa5a5a5a2
iwlwifi 0000:01:00.0: Can't find a correct rfid for crf id 0x5a2
...
BUG: kernel NULL pointer dereference, address: 0000000000000028
...
RIP: 0010:iwl_pci_remove+0x12/0x30 [iwlwifi]
pci_device_remove+0x3e/0xb0
device_release_driver_internal+0x103/0x1f0
driver_detach+0x4c/0x90
bus_remove_driver+0x5c/0xd0
driver_unregister+0x31/0x50
pci_unregister_driver+0x40/0x90
iwl_pci_unregister_driver+0x15/0x20 [iwlwifi]
__exit_compat+0x9/0x98 [iwlwifi]
__x64_sys_delete_module+0x147/0x260

Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.082f6e21341b.I0db21d7fa9a828d571ca886713bd0b5d0b6e1e5c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
index 99768d6a60322..49e8a27ecce54 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
@@ -1699,6 +1699,9 @@ static void iwl_pci_remove(struct pci_dev *pdev)
 {
 	struct iwl_trans *trans = pci_get_drvdata(pdev);
 
+	if (!trans)
+		return;
+
 	iwl_drv_stop(trans->drv);
 
 	iwl_trans_pcie_free(trans);
-- 
2.39.2

[PATCH AUTOSEL 6.3 36/59] wifi: iwlwifi: add a new PCI device ID for BZ device

[Sasha Levin]

From: Mukesh Sisodiya <mukesh.sisodiya@intel.com>

[ Upstream commit c30a2a64788b3d617a9c5d96adb76c68b0862e5f ]

Add support for a new PCI device ID 0x272b once registering with PCIe.

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.56342664110d.I5aa6f2858fdcf69fdea4f1a873115a48bd43764e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
index 49e8a27ecce54..26e5ef944ecb9 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
@@ -504,6 +504,7 @@ static const struct pci_device_id iwl_hw_card_ids[] = {
 
 /* Bz devices */
 	{IWL_PCI_DEVICE(0x2727, PCI_ANY_ID, iwl_bz_trans_cfg)},
+	{IWL_PCI_DEVICE(0x272b, PCI_ANY_ID, iwl_bz_trans_cfg)},
 	{IWL_PCI_DEVICE(0xA840, PCI_ANY_ID, iwl_bz_trans_cfg)},
 	{IWL_PCI_DEVICE(0x7740, PCI_ANY_ID, iwl_bz_trans_cfg)},
 #endif /* CONFIG_IWLMVM */
-- 
2.39.2

[PATCH AUTOSEL 6.3 37/59] wifi: iwlwifi: pcie: Fix integer overflow in iwl_write_to_user_buf

[Sasha Levin]

From: Hyunwoo Kim <imv4bel@gmail.com>

[ Upstream commit 58d1b717879bfeabe09b35e41ad667c79933eb2e ]

An integer overflow occurs in the iwl_write_to_user_buf() function,
which is called by the iwl_dbgfs_monitor_data_read() function.

static bool iwl_write_to_user_buf(char __user *user_buf, ssize_t count,
				  void *buf, ssize_t *size,
				  ssize_t *bytes_copied)
{
	int buf_size_left = count - *bytes_copied;

	buf_size_left = buf_size_left - (buf_size_left % sizeof(u32));
	if (*size > buf_size_left)
		*size = buf_size_left;

If the user passes a SIZE_MAX value to the "ssize_t count" parameter,
the ssize_t count parameter is assigned to "int buf_size_left".
Then compare "*size" with "buf_size_left" . Here, "buf_size_left" is a
negative number, so "*size" is assigned "buf_size_left" and goes into
the third argument of the copy_to_user function, causing a heap overflow.

This is not a security vulnerability because iwl_dbgfs_monitor_data_read()
is a debugfs operation with 0400 privileges.

Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.2d80ace81532.Iecfba549e0e0be21bbb0324675392e42e75bd5ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
index 0a9af1ad1f206..6d5d0d40477a6 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
@@ -2863,7 +2863,7 @@ static bool iwl_write_to_user_buf(char __user *user_buf, ssize_t count,
 				  void *buf, ssize_t *size,
 				  ssize_t *bytes_copied)
 {
-	int buf_size_left = count - *bytes_copied;
+	ssize_t buf_size_left = count - *bytes_copied;
 
 	buf_size_left = buf_size_left - (buf_size_left % sizeof(u32));
 	if (*size > buf_size_left)
-- 
2.39.2

[PATCH AUTOSEL 6.3 38/59] wifi: iwlwifi: mvm: fix ptk_pn memory leak

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit d066a530af8e1833c7ea2cef7784004700c85f79 ]

If adding a key to firmware fails we leak the allocated ptk_pn.
This shouldn't happen in practice, but we should still fix it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.99446ffd02bc.I82a2ad6ec1395f188e0a1677cc619e3fcb1feac9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index b55b1b17f4d19..c0b5dc7bd76b1 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -3587,7 +3587,7 @@ static int __iwl_mvm_mac_set_key(struct ieee80211_hw *hw,
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
 	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
 	struct iwl_mvm_sta *mvmsta = NULL;
-	struct iwl_mvm_key_pn *ptk_pn;
+	struct iwl_mvm_key_pn *ptk_pn = NULL;
 	int keyidx = key->keyidx;
 	u32 sec_key_id = WIDE_ID(DATA_PATH_GROUP, SEC_KEY_CMD);
 	u8 sec_key_ver = iwl_fw_lookup_cmd_ver(mvm->fw, sec_key_id, 0);
@@ -3739,6 +3739,10 @@ static int __iwl_mvm_mac_set_key(struct ieee80211_hw *hw,
 		if (ret) {
 			IWL_WARN(mvm, "set key failed\n");
 			key->hw_key_idx = STA_KEY_IDX_INVALID;
+			if (ptk_pn) {
+				RCU_INIT_POINTER(mvmsta->ptk_pn[keyidx], NULL);
+				kfree(ptk_pn);
+			}
 			/*
 			 * can't add key for RX, but we don't need it
 			 * in the device for TX so still return 0,
-- 
2.39.2

[PATCH AUTOSEL 6.3 39/59] block, bfq: Fix division by zero error on zero wsum

[Sasha Levin]

From: Colin Ian King <colin.i.king@gmail.com>

[ Upstream commit e53413f8deedf738a6782cc14cc00bd5852ccf18 ]

When the weighted sum is zero the calculation of limit causes
a division by zero error. Fix this by continuing to the next level.

This was discovered by running as root:

stress-ng --ioprio 0

Fixes divison by error oops:

[  521.450556] divide error: 0000 [#1] SMP NOPTI
[  521.450766] CPU: 2 PID: 2684464 Comm: stress-ng-iopri Not tainted 6.2.1-1280.native #1
[  521.451117] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
[  521.451627] RIP: 0010:bfqq_request_over_limit+0x207/0x400
[  521.451875] Code: 01 48 8d 0c c8 74 0b 48 8b 82 98 00 00 00 48 8d 0c c8 8b 85 34 ff ff ff 48 89 ca 41 0f af 41 50 48 d1 ea 48 98 48 01 d0 31 d2 <48> f7 f1 41 39 41 48 89 85 34 ff ff ff 0f 8c 7b 01 00 00 49 8b 44
[  521.452699] RSP: 0018:ffffb1af84eb3948 EFLAGS: 00010046
[  521.452938] RAX: 000000000000003c RBX: 0000000000000000 RCX: 0000000000000000
[  521.453262] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb1af84eb3978
[  521.453584] RBP: ffffb1af84eb3a30 R08: 0000000000000001 R09: ffff8f88ab8a4ba0
[  521.453905] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8f88ab8a4b18
[  521.454224] R13: ffff8f8699093000 R14: 0000000000000001 R15: ffffb1af84eb3970
[  521.454549] FS:  00005640b6b0b580(0000) GS:ffff8f88b3880000(0000) knlGS:0000000000000000
[  521.454912] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  521.455170] CR2: 00007ffcbcae4e38 CR3: 00000002e46de001 CR4: 0000000000770ee0
[  521.455491] PKRU: 55555554
[  521.455619] Call Trace:
[  521.455736]  <TASK>
[  521.455837]  ? bfq_request_merge+0x3a/0xc0
[  521.456027]  ? elv_merge+0x115/0x140
[  521.456191]  bfq_limit_depth+0xc8/0x240
[  521.456366]  __blk_mq_alloc_requests+0x21a/0x2c0
[  521.456577]  blk_mq_submit_bio+0x23c/0x6c0
[  521.456766]  __submit_bio+0xb8/0x140
[  521.457236]  submit_bio_noacct_nocheck+0x212/0x300
[  521.457748]  submit_bio_noacct+0x1a6/0x580
[  521.458220]  submit_bio+0x43/0x80
[  521.458660]  ext4_io_submit+0x23/0x80
[  521.459116]  ext4_do_writepages+0x40a/0xd00
[  521.459596]  ext4_writepages+0x65/0x100
[  521.460050]  do_writepages+0xb7/0x1c0
[  521.460492]  __filemap_fdatawrite_range+0xa6/0x100
[  521.460979]  file_write_and_wait_range+0xbf/0x140
[  521.461452]  ext4_sync_file+0x105/0x340
[  521.461882]  __x64_sys_fsync+0x67/0x100
[  521.462305]  ? syscall_exit_to_user_mode+0x2c/0x1c0
[  521.462768]  do_syscall_64+0x3b/0xc0
[  521.463165]  entry_SYSCALL_64_after_hwframe+0x5a/0xc4
[  521.463621] RIP: 0033:0x5640b6c56590
[  521.464006] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 80 3d 71 70 0e 00 00 74 17 b8 4a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 48 c3 0f 1f 80 00 00 00 00 48 83 ec 18 89 7c

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20230413133009.1605335-1-colin.i.king@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/bfq-iosched.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index d9ed3108c17af..bac977da4eb5b 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -649,6 +649,8 @@ static bool bfqq_request_over_limit(struct bfq_queue *bfqq, int limit)
 					sched_data->service_tree[i].wsum;
 			}
 		}
+		if (!wsum)
+			continue;
 		limit = DIV_ROUND_CLOSEST(limit * entity->weight, wsum);
 		if (entity->allocated >= limit) {
 			bfq_log_bfqq(bfqq->bfqd, bfqq,
-- 
2.39.2

[PATCH AUTOSEL 6.3 40/59] wifi: ath11k: Ignore frags from uninitialized peer in dp.

[Sasha Levin]

From: Harshitha Prem <quic_hprem@quicinc.com>

[ Upstream commit a06bfb3c9f69f303692cdae87bc0899d2ae8b2a6 ]

When max virtual ap interfaces are configured in all the bands with
ACS and hostapd restart is done every 60s, a crash is observed at
random times.
In this certain scenario, a fragmented packet is received for
self peer, for which rx_tid and rx_frags are not initialized in
datapath. While handling this fragment, crash is observed as the
rx_frag list is uninitialised and when we walk in
ath11k_dp_rx_h_sort_frags, skb null leads to exception.

To address this, before processing received fragments we check
dp_setup_done flag is set to ensure that peer has completed its
dp peer setup for fragment queue, else ignore processing the
fragments.

Call trace:
  ath11k_dp_process_rx_err+0x550/0x1084 [ath11k]
  ath11k_dp_service_srng+0x70/0x370 [ath11k]
  0xffffffc009693a04
  __napi_poll+0x30/0xa4
  net_rx_action+0x118/0x270
  __do_softirq+0x10c/0x244
  irq_exit+0x64/0xb4
  __handle_domain_irq+0x88/0xac
  gic_handle_irq+0x74/0xbc
  el1_irq+0xf0/0x1c0
  arch_cpu_idle+0x10/0x18
  do_idle+0x104/0x248
  cpu_startup_entry+0x20/0x64
  rest_init+0xd0/0xdc
  arch_call_rest_init+0xc/0x14
  start_kernel+0x480/0x4b8
  Code: f9400281 f94066a2 91405021 b94a0023 (f9406401)

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Nagarajan Maran <quic_nmaran@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230403184155.8670-2-quic_nmaran@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/dp.c    | 4 +++-
 drivers/net/wireless/ath/ath11k/dp_rx.c | 8 ++++++++
 drivers/net/wireless/ath/ath11k/peer.h  | 1 +
 3 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/dp.c b/drivers/net/wireless/ath/ath11k/dp.c
index f5156a7fbdd7a..d070bcb3fe247 100644
--- a/drivers/net/wireless/ath/ath11k/dp.c
+++ b/drivers/net/wireless/ath/ath11k/dp.c
@@ -36,6 +36,7 @@ void ath11k_dp_peer_cleanup(struct ath11k *ar, int vdev_id, const u8 *addr)
 	}
 
 	ath11k_peer_rx_tid_cleanup(ar, peer);
+	peer->dp_setup_done = false;
 	crypto_free_shash(peer->tfm_mmic);
 	spin_unlock_bh(&ab->base_lock);
 }
@@ -72,7 +73,8 @@ int ath11k_dp_peer_setup(struct ath11k *ar, int vdev_id, const u8 *addr)
 	ret = ath11k_peer_rx_frag_setup(ar, addr, vdev_id);
 	if (ret) {
 		ath11k_warn(ab, "failed to setup rx defrag context\n");
-		return ret;
+		tid--;
+		goto peer_clean;
 	}
 
 	/* TODO: Setup other peer specific resource used in data path */
diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c
index b65a84a882641..294c6fcfa1aa8 100644
--- a/drivers/net/wireless/ath/ath11k/dp_rx.c
+++ b/drivers/net/wireless/ath/ath11k/dp_rx.c
@@ -3138,6 +3138,7 @@ int ath11k_peer_rx_frag_setup(struct ath11k *ar, const u8 *peer_mac, int vdev_id
 	}
 
 	peer->tfm_mmic = tfm;
+	peer->dp_setup_done = true;
 	spin_unlock_bh(&ab->base_lock);
 
 	return 0;
@@ -3583,6 +3584,13 @@ static int ath11k_dp_rx_frag_h_mpdu(struct ath11k *ar,
 		ret = -ENOENT;
 		goto out_unlock;
 	}
+	if (!peer->dp_setup_done) {
+		ath11k_warn(ab, "The peer %pM [%d] has uninitialized datapath\n",
+			    peer->addr, peer_id);
+		ret = -ENOENT;
+		goto out_unlock;
+	}
+
 	rx_tid = &peer->rx_tid[tid];
 
 	if ((!skb_queue_empty(&rx_tid->rx_frags) && seqno != rx_tid->cur_sn) ||
diff --git a/drivers/net/wireless/ath/ath11k/peer.h b/drivers/net/wireless/ath/ath11k/peer.h
index 6dd17bafe3a0c..9bd385d0a38c9 100644
--- a/drivers/net/wireless/ath/ath11k/peer.h
+++ b/drivers/net/wireless/ath/ath11k/peer.h
@@ -35,6 +35,7 @@ struct ath11k_peer {
 	u16 sec_type;
 	u16 sec_type_grp;
 	bool is_authorized;
+	bool dp_setup_done;
 };
 
 void ath11k_peer_unmap_event(struct ath11k_base *ab, u16 peer_id);
-- 
2.39.2

[PATCH AUTOSEL 6.3 41/59] wifi: mt76: mt7921: add Netgear AXE3000 (A8000) support

[Sasha Levin]

From: Reese Russell <git@qrsnap.io>

[ Upstream commit 03eb52dd78cab08f13925aeec8315fbdbcba3253 ]

Issue: Though the Netgear AXE3000 (A8000) is based on the mt7921
chipset because of the unique USB VID:PID combination this device
does not initialize/register. Thus making it not plug and play.

Fix: Adds support for the Netgear AXE3000 (A8000) based on the Mediatek
mt7921au chipset. The method of action is adding the USD VID/PID
pair to the mt7921u_device_table[] array.

Notes: A retail sample of the Netgear AXE3000 (A8000) yeilds the following
from lsusb D 0846:9060 NetGear, Inc. Wireless_Device. This pair
0846:9060 VID:PID has been reported by other users on Github.

Signed-off-by: Reese Russell <git@qrsnap.io>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7921/usb.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/usb.c b/drivers/net/wireless/mediatek/mt76/mt7921/usb.c
index 8fef09ed29c91..a95ec388653c5 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/usb.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/usb.c
@@ -18,6 +18,9 @@ static const struct usb_device_id mt7921u_device_table[] = {
 	/* Comfast CF-952AX */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x3574, 0x6211, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)MT7921_FIRMWARE_WM },
+	/* Netgear, Inc. [A8000,AXE3000] */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x0846, 0x9060, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)MT7921_FIRMWARE_WM },
 	{ },
 };
 
-- 
2.39.2

[PATCH AUTOSEL 6.3 42/59] wifi: iwlwifi: fix iwl_mvm_max_amsdu_size() for MLO

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit b2bc600cced23762d4e97db8989b18772145604f ]

For MLO, we cannot use vif->bss_conf.chandef.chan->band, since
that will lead to a NULL-ptr dereference as bss_conf isn't used.
However, in case of real MLO, we also need to take both LMACs
into account if they exist, since the station might be active
on both LMACs at the same time.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.3588afc85d79.I11592893bbc191b9548518b8bd782de568a9f848@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 37 +++++++++++++++++++--
 1 file changed, 34 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
index 9813d7fa18007..1c454392de0be 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
@@ -791,10 +791,11 @@ unsigned int iwl_mvm_max_amsdu_size(struct iwl_mvm *mvm,
 				    struct ieee80211_sta *sta, unsigned int tid)
 {
 	struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
-	enum nl80211_band band = mvmsta->vif->bss_conf.chandef.chan->band;
 	u8 ac = tid_to_mac80211_ac[tid];
+	enum nl80211_band band;
 	unsigned int txf;
-	int lmac = iwl_mvm_get_lmac_id(mvm->fw, band);
+	unsigned int val;
+	int lmac;
 
 	/* For HE redirect to trigger based fifos */
 	if (sta->deflink.he_cap.has_he && !WARN_ON(!iwl_mvm_has_new_tx_api(mvm)))
@@ -808,7 +809,37 @@ unsigned int iwl_mvm_max_amsdu_size(struct iwl_mvm *mvm,
 	 * We also want to have the start of the next packet inside the
 	 * fifo to be able to send bursts.
 	 */
-	return min_t(unsigned int, mvmsta->max_amsdu_len,
+	val = mvmsta->max_amsdu_len;
+
+	if (hweight16(sta->valid_links) <= 1) {
+		if (sta->valid_links) {
+			struct ieee80211_bss_conf *link_conf;
+			unsigned int link = ffs(sta->valid_links) - 1;
+
+			rcu_read_lock();
+			link_conf = rcu_dereference(mvmsta->vif->link_conf[link]);
+			if (WARN_ON(!link_conf))
+				band = NL80211_BAND_2GHZ;
+			else
+				band = link_conf->chandef.chan->band;
+			rcu_read_unlock();
+		} else {
+			band = mvmsta->vif->bss_conf.chandef.chan->band;
+		}
+
+		lmac = iwl_mvm_get_lmac_id(mvm->fw, band);
+	} else if (fw_has_capa(&mvm->fw->ucode_capa,
+			       IWL_UCODE_TLV_CAPA_CDB_SUPPORT)) {
+		/* for real MLO restrict to both LMACs if they exist */
+		lmac = IWL_LMAC_5G_INDEX;
+		val = min_t(unsigned int, val,
+			    mvm->fwrt.smem_cfg.lmac[lmac].txfifo_size[txf] - 256);
+		lmac = IWL_LMAC_24G_INDEX;
+	} else {
+		lmac = IWL_LMAC_24G_INDEX;
+	}
+
+	return min_t(unsigned int, val,
 		     mvm->fwrt.smem_cfg.lmac[lmac].txfifo_size[txf] - 256);
 }
 
-- 
2.39.2

[PATCH AUTOSEL 6.3 43/59] f2fs: relax sanity check if checkpoint is corrupted

[Sasha Levin]

From: Jaegeuk Kim <jaegeuk@kernel.org>

[ Upstream commit bd90c5cd339a9d7cdc609d2d6310b80dc697070d ]

1. extent_cache
 - let's drop the largest extent_cache
2. invalidate_block
 - don't show the warnings

Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/checkpoint.c   | 10 ++++++++++
 fs/f2fs/data.c         |  4 ++++
 fs/f2fs/extent_cache.c | 22 +++++++++++++++-------
 3 files changed, 29 insertions(+), 7 deletions(-)

diff --git a/fs/f2fs/checkpoint.c b/fs/f2fs/checkpoint.c
index 96af24c394c39..d4c862ccd1f72 100644
--- a/fs/f2fs/checkpoint.c
+++ b/fs/f2fs/checkpoint.c
@@ -152,6 +152,11 @@ static bool __is_bitmap_valid(struct f2fs_sb_info *sbi, block_t blkaddr,
 	se = get_seg_entry(sbi, segno);
 
 	exist = f2fs_test_bit(offset, se->cur_valid_map);
+
+	/* skip data, if we already have an error in checkpoint. */
+	if (unlikely(f2fs_cp_error(sbi)))
+		return exist;
+
 	if (exist && type == DATA_GENERIC_ENHANCE_UPDATE) {
 		f2fs_err(sbi, "Inconsistent error blkaddr:%u, sit bitmap:%d",
 			 blkaddr, exist);
@@ -202,6 +207,11 @@ bool f2fs_is_valid_blkaddr(struct f2fs_sb_info *sbi,
 	case DATA_GENERIC_ENHANCE_UPDATE:
 		if (unlikely(blkaddr >= MAX_BLKADDR(sbi) ||
 				blkaddr < MAIN_BLKADDR(sbi))) {
+
+			/* Skip to emit an error message. */
+			if (unlikely(f2fs_cp_error(sbi)))
+				return false;
+
 			f2fs_warn(sbi, "access invalid blkaddr:%u",
 				  blkaddr);
 			set_sbi_flag(sbi, SBI_NEED_FSCK);
diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index 4677656215db9..30c15acc81dbb 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -2235,6 +2235,10 @@ int f2fs_read_multi_pages(struct compress_ctx *cc, struct bio **bio_ret,
 	if (ret)
 		goto out;
 
+	if (unlikely(f2fs_cp_error(sbi))) {
+		ret = -EIO;
+		goto out_put_dnode;
+	}
 	f2fs_bug_on(sbi, dn.data_blkaddr != COMPRESS_ADDR);
 
 skip_reading_dnode:
diff --git a/fs/f2fs/extent_cache.c b/fs/f2fs/extent_cache.c
index 28b12553f2b34..bd02f0260db9b 100644
--- a/fs/f2fs/extent_cache.c
+++ b/fs/f2fs/extent_cache.c
@@ -23,18 +23,26 @@ bool sanity_check_extent_cache(struct inode *inode)
 {
 	struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
 	struct f2fs_inode_info *fi = F2FS_I(inode);
+	struct extent_tree *et = fi->extent_tree[EX_READ];
 	struct extent_info *ei;
 
-	if (!fi->extent_tree[EX_READ])
+	if (!et)
+		return true;
+
+	ei = &et->largest;
+	if (!ei->len)
 		return true;
 
-	ei = &fi->extent_tree[EX_READ]->largest;
+	/* Let's drop, if checkpoint got corrupted. */
+	if (is_set_ckpt_flags(sbi, CP_ERROR_FLAG)) {
+		ei->len = 0;
+		et->largest_updated = true;
+		return true;
+	}
 
-	if (ei->len &&
-		(!f2fs_is_valid_blkaddr(sbi, ei->blk,
-					DATA_GENERIC_ENHANCE) ||
-		!f2fs_is_valid_blkaddr(sbi, ei->blk + ei->len - 1,
-					DATA_GENERIC_ENHANCE))) {
+	if (!f2fs_is_valid_blkaddr(sbi, ei->blk, DATA_GENERIC_ENHANCE) ||
+	    !f2fs_is_valid_blkaddr(sbi, ei->blk + ei->len - 1,
+					DATA_GENERIC_ENHANCE)) {
 		set_sbi_flag(sbi, SBI_NEED_FSCK);
 		f2fs_warn(sbi, "%s: inode (ino=%lx) extent info [%u, %u, %u] is incorrect, run fsck to fix",
 			  __func__, inode->i_ino,
-- 
2.39.2

[PATCH AUTOSEL 6.3 44/59] null_blk: Always check queue mode setting from configfs

[Sasha Levin]

From: Chaitanya Kulkarni <kch@nvidia.com>

[ Upstream commit 63f8793ee60513a09f110ea460a6ff2c33811cdb ]

Make sure to check device queue mode in the null_validate_conf() and
return error for NULL_Q_RQ as we don't allow legacy I/O path, without
this patch we get OOPs when queue mode is set to 1 from configfs,
following are repro steps :-

modprobe null_blk nr_devices=0
mkdir config/nullb/nullb0
echo 1 > config/nullb/nullb0/memory_backed
echo 4096 > config/nullb/nullb0/blocksize
echo 20480 > config/nullb/nullb0/size
echo 1 > config/nullb/nullb0/queue_mode
echo 1 > config/nullb/nullb0/power

Entering kdb (current=0xffff88810acdd080, pid 2372) on processor 42 Oops: (null)
due to oops @ 0xffffffffc041c329
CPU: 42 PID: 2372 Comm: sh Tainted: G           O     N 6.3.0-rc5lblk+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
RIP: 0010:null_add_dev.part.0+0xd9/0x720 [null_blk]
Code: 01 00 00 85 d2 0f 85 a1 03 00 00 48 83 bb 08 01 00 00 00 0f 85 f7 03 00 00 80 bb 62 01 00 00 00 48 8b 75 20 0f 85 6d 02 00 00 <48> 89 6e 60 48 8b 75 20 bf 06 00 00 00 e8 f5 37 2c c1 48 8b 75 20
RSP: 0018:ffffc900052cbde0 EFLAGS: 00010246
RAX: 0000000000000001 RBX: ffff88811084d800 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888100042e00
RBP: ffff8881053d8200 R08: ffffc900052cbd68 R09: ffff888105db2000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000002
R13: ffff888104765200 R14: ffff88810eec1748 R15: ffff88810eec1740
FS:  00007fd445fd1740(0000) GS:ffff8897dfc80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000060 CR3: 0000000166a00000 CR4: 0000000000350ee0
DR0: ffffffff8437a488 DR1: ffffffff8437a489 DR2: ffffffff8437a48a
DR3: ffffffff8437a48b DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 nullb_device_power_store+0xd1/0x120 [null_blk]
 configfs_write_iter+0xb4/0x120
 vfs_write+0x2ba/0x3c0
 ksys_write+0x5f/0xe0
 do_syscall_64+0x3b/0x90
 entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7fd4460c57a7
Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007ffd3792a4a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fd4460c57a7
RDX: 0000000000000002 RSI: 000055b43c02e4c0 RDI: 0000000000000001
RBP: 000055b43c02e4c0 R08: 000000000000000a R09: 00007fd44615b4e0
R10: 00007fd44615b3e0 R11: 0000000000000246 R12: 0000000000000002
R13: 00007fd446198520 R14: 0000000000000002 R15: 00007fd446198700
 </TASK>

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Link: https://lore.kernel.org/r/20230416220339.43845-1-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/null_blk/main.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/block/null_blk/main.c b/drivers/block/null_blk/main.c
index 9e6b032c8ecc2..14491952047f5 100644
--- a/drivers/block/null_blk/main.c
+++ b/drivers/block/null_blk/main.c
@@ -1964,6 +1964,11 @@ static int null_init_tag_set(struct nullb *nullb, struct blk_mq_tag_set *set)
 
 static int null_validate_conf(struct nullb_device *dev)
 {
+	if (dev->queue_mode == NULL_Q_RQ) {
+		pr_err("legacy IO path is no longer available\n");
+		return -EINVAL;
+	}
+
 	dev->blocksize = round_down(dev->blocksize, 512);
 	dev->blocksize = clamp_t(unsigned int, dev->blocksize, 512, 4096);
 
-- 
2.39.2

[PATCH AUTOSEL 6.3 45/59] wifi: iwlwifi: dvm: Fix memcpy: detected field-spanning write backtrace

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit ef16799640865f937719f0771c93be5dca18adc6 ]

A received TKIP key may be up to 32 bytes because it may contain
MIC rx/tx keys too. These are not used by iwl and copying these
over overflows the iwl_keyinfo.key field.

Add a check to not copy more data to iwl_keyinfo.key then will fit.

This fixes backtraces like this one:

 memcpy: detected field-spanning write (size 32) of single field "sta_cmd.key.key" at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 (size 16)
 WARNING: CPU: 1 PID: 946 at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 iwlagn_send_sta_key+0x375/0x390 [iwldvm]
 <snip>
 Hardware name: Dell Inc. Latitude E6430/0H3MT5, BIOS A21 05/08/2017
 RIP: 0010:iwlagn_send_sta_key+0x375/0x390 [iwldvm]
 <snip>
 Call Trace:
  <TASK>
  iwl_set_dynamic_key+0x1f0/0x220 [iwldvm]
  iwlagn_mac_set_key+0x1e4/0x280 [iwldvm]
  drv_set_key+0xa4/0x1b0 [mac80211]
  ieee80211_key_enable_hw_accel+0xa8/0x2d0 [mac80211]
  ieee80211_key_replace+0x22d/0x8e0 [mac80211]
 <snip>

Link: https://www.alionet.org/index.php?topic=1469.0
Link: https://lore.kernel.org/linux-wireless/20230218191056.never.374-kees@kernel.org/
Link: https://lore.kernel.org/linux-wireless/68760035-7f75-1b23-e355-bfb758a87d83@redhat.com/
Cc: Kees Cook <keescook@chromium.org>
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/dvm/sta.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/sta.c b/drivers/net/wireless/intel/iwlwifi/dvm/sta.c
index cef43cf80620a..8b01ab986cb13 100644
--- a/drivers/net/wireless/intel/iwlwifi/dvm/sta.c
+++ b/drivers/net/wireless/intel/iwlwifi/dvm/sta.c
@@ -1081,6 +1081,7 @@ static int iwlagn_send_sta_key(struct iwl_priv *priv,
 {
 	__le16 key_flags;
 	struct iwl_addsta_cmd sta_cmd;
+	size_t to_copy;
 	int i;
 
 	spin_lock_bh(&priv->sta_lock);
@@ -1100,7 +1101,9 @@ static int iwlagn_send_sta_key(struct iwl_priv *priv,
 		sta_cmd.key.tkip_rx_tsc_byte2 = tkip_iv32;
 		for (i = 0; i < 5; i++)
 			sta_cmd.key.tkip_rx_ttak[i] = cpu_to_le16(tkip_p1k[i]);
-		memcpy(sta_cmd.key.key, keyconf->key, keyconf->keylen);
+		/* keyconf may contain MIC rx/tx keys which iwl does not use */
+		to_copy = min_t(size_t, sizeof(sta_cmd.key.key), keyconf->keylen);
+		memcpy(sta_cmd.key.key, keyconf->key, to_copy);
 		break;
 	case WLAN_CIPHER_SUITE_WEP104:
 		key_flags |= STA_KEY_FLG_KEY_SIZE_MSK;
-- 
2.39.2

[PATCH AUTOSEL 6.3 46/59] wifi: ath11k: Fix SKB corruption in REO destination ring

[Sasha Levin]

From: Nagarajan Maran <quic_nmaran@quicinc.com>

[ Upstream commit f9fff67d2d7ca6fa8066132003a3deef654c55b1 ]

While running traffics for a long time, randomly an RX descriptor
filled with value "0" from REO destination ring is received.
This descriptor which is invalid causes the wrong SKB (SKB stored in
the IDR lookup with buffer id "0") to be fetched which in turn
causes SKB memory corruption issue and the same leads to crash
after some time.

Changed the start id for idr allocation to "1" and the buffer id "0"
is reserved for error validation. Introduced Sanity check to validate
the descriptor, before processing the SKB.

Crash Signature :

Unable to handle kernel paging request at virtual address 3f004900
PC points to "b15_dma_inv_range+0x30/0x50"
LR points to "dma_cache_maint_page+0x8c/0x128".
The Backtrace obtained is as follows:
[<8031716c>] (b15_dma_inv_range) from [<80313a4c>] (dma_cache_maint_page+0x8c/0x128)
[<80313a4c>] (dma_cache_maint_page) from [<80313b90>] (__dma_page_dev_to_cpu+0x28/0xcc)
[<80313b90>] (__dma_page_dev_to_cpu) from [<7fb5dd68>] (ath11k_dp_process_rx+0x1e8/0x4a4 [ath11k])
[<7fb5dd68>] (ath11k_dp_process_rx [ath11k]) from [<7fb53c20>] (ath11k_dp_service_srng+0xb0/0x2ac [ath11k])
[<7fb53c20>] (ath11k_dp_service_srng [ath11k]) from [<7f67bba4>] (ath11k_pci_ext_grp_napi_poll+0x1c/0x78 [ath11k_pci])
[<7f67bba4>] (ath11k_pci_ext_grp_napi_poll [ath11k_pci]) from [<807d5cf4>] (__napi_poll+0x28/0xb8)
[<807d5cf4>] (__napi_poll) from [<807d5f28>] (net_rx_action+0xf0/0x280)
[<807d5f28>] (net_rx_action) from [<80302148>] (__do_softirq+0xd0/0x280)
[<80302148>] (__do_softirq) from [<80320408>] (irq_exit+0x74/0xd4)
[<80320408>] (irq_exit) from [<803638a4>] (__handle_domain_irq+0x90/0xb4)
[<803638a4>] (__handle_domain_irq) from [<805bedec>] (gic_handle_irq+0x58/0x90)
[<805bedec>] (gic_handle_irq) from [<80301a78>] (__irq_svc+0x58/0x8c)

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Signed-off-by: Nagarajan Maran <quic_nmaran@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230403191533.28114-1-quic_nmaran@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/dp_rx.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c
index 294c6fcfa1aa8..32a4f88861d58 100644
--- a/drivers/net/wireless/ath/ath11k/dp_rx.c
+++ b/drivers/net/wireless/ath/ath11k/dp_rx.c
@@ -389,10 +389,10 @@ int ath11k_dp_rxbufs_replenish(struct ath11k_base *ab, int mac_id,
 			goto fail_free_skb;
 
 		spin_lock_bh(&rx_ring->idr_lock);
-		buf_id = idr_alloc(&rx_ring->bufs_idr, skb, 0,
-				   rx_ring->bufs_max * 3, GFP_ATOMIC);
+		buf_id = idr_alloc(&rx_ring->bufs_idr, skb, 1,
+				   (rx_ring->bufs_max * 3) + 1, GFP_ATOMIC);
 		spin_unlock_bh(&rx_ring->idr_lock);
-		if (buf_id < 0)
+		if (buf_id <= 0)
 			goto fail_dma_unmap;
 
 		desc = ath11k_hal_srng_src_get_next_entry(ab, srng);
@@ -2665,6 +2665,9 @@ int ath11k_dp_process_rx(struct ath11k_base *ab, int ring_id,
 				   cookie);
 		mac_id = FIELD_GET(DP_RXDMA_BUF_COOKIE_PDEV_ID, cookie);
 
+		if (unlikely(buf_id == 0))
+			continue;
+
 		ar = ab->pdevs[mac_id].ar;
 		rx_ring = &ar->dp.rx_refill_buf_ring;
 		spin_lock_bh(&rx_ring->idr_lock);
-- 
2.39.2

[PATCH AUTOSEL 6.3 47/59] wifi: rtw88: Fix memory leak in rtw88_usb

[Sasha Levin]

From: Larry Finger <Larry.Finger@lwfinger.net>

[ Upstream commit 59a3a312009723e3e5082899655fdcc420e2b47a ]

Kmemleak shows the following leak arising from routine in the usb
probe routine:

unreferenced object 0xffff895cb29bba00 (size 512):
  comm "(udev-worker)", pid 534, jiffies 4294903932 (age 102751.088s)
  hex dump (first 32 bytes):
    77 30 30 30 00 00 00 00 02 2f 2d 2b 30 00 00 00  w000...../-+0...
    02 00 2a 28 00 00 00 00 ff 55 ff ff ff 00 00 00  ..*(.....U......
  backtrace:
    [<ffffffff9265fa36>] kmalloc_trace+0x26/0x90
    [<ffffffffc17eec41>] rtw_usb_probe+0x2f1/0x680 [rtw_usb]
    [<ffffffffc03e19fd>] usb_probe_interface+0xdd/0x2e0 [usbcore]
    [<ffffffff92b4f2fe>] really_probe+0x18e/0x3d0
    [<ffffffff92b4f5b8>] __driver_probe_device+0x78/0x160
    [<ffffffff92b4f6bf>] driver_probe_device+0x1f/0x90
    [<ffffffff92b4f8df>] __driver_attach+0xbf/0x1b0
    [<ffffffff92b4d350>] bus_for_each_dev+0x70/0xc0
    [<ffffffff92b4e51e>] bus_add_driver+0x10e/0x210
    [<ffffffff92b50935>] driver_register+0x55/0xf0
    [<ffffffffc03e0708>] usb_register_driver+0x88/0x140 [usbcore]
    [<ffffffff92401153>] do_one_initcall+0x43/0x210
    [<ffffffff9254f42a>] do_init_module+0x4a/0x200
    [<ffffffff92551d1c>] __do_sys_finit_module+0xac/0x120
    [<ffffffff92ee6626>] do_syscall_64+0x56/0x80
    [<ffffffff9300006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

The leak was verified to be real by unloading the driver, which resulted
in a dangling pointer to the allocation.

The allocated memory is freed in rtw_usb_intf_deinit().

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230417160331.23071-1-Larry.Finger@lwfinger.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw88/usb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/realtek/rtw88/usb.c b/drivers/net/wireless/realtek/rtw88/usb.c
index 68e1b782d1992..05c7326443614 100644
--- a/drivers/net/wireless/realtek/rtw88/usb.c
+++ b/drivers/net/wireless/realtek/rtw88/usb.c
@@ -780,6 +780,7 @@ static void rtw_usb_intf_deinit(struct rtw_dev *rtwdev,
 	struct rtw_usb *rtwusb = rtw_get_usb_priv(rtwdev);
 
 	usb_put_dev(rtwusb->udev);
+	kfree(rtwusb->usb_data);
 	usb_set_intfdata(intf, NULL);
 }
 
-- 
2.39.2

[PATCH AUTOSEL 6.3 48/59] nbd: fix incomplete validation of ioctl arg

[Sasha Levin]

From: Zhong Jinghua <zhongjinghua@huawei.com>

[ Upstream commit 55793ea54d77719a071b1ccc05a05056e3b5e009 ]

We tested and found an alarm caused by nbd_ioctl arg without verification.
The UBSAN warning calltrace like below:

UBSAN: Undefined behaviour in fs/buffer.c:1709:35
signed integer overflow:
-9223372036854775808 - 1 cannot be represented in type 'long long int'
CPU: 3 PID: 2523 Comm: syz-executor.0 Not tainted 4.19.90 #1
Hardware name: linux,dummy-virt (DT)
Call trace:
 dump_backtrace+0x0/0x3f0 arch/arm64/kernel/time.c:78
 show_stack+0x28/0x38 arch/arm64/kernel/traps.c:158
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x170/0x1dc lib/dump_stack.c:118
 ubsan_epilogue+0x18/0xb4 lib/ubsan.c:161
 handle_overflow+0x188/0x1dc lib/ubsan.c:192
 __ubsan_handle_sub_overflow+0x34/0x44 lib/ubsan.c:206
 __block_write_full_page+0x94c/0xa20 fs/buffer.c:1709
 block_write_full_page+0x1f0/0x280 fs/buffer.c:2934
 blkdev_writepage+0x34/0x40 fs/block_dev.c:607
 __writepage+0x68/0xe8 mm/page-writeback.c:2305
 write_cache_pages+0x44c/0xc70 mm/page-writeback.c:2240
 generic_writepages+0xdc/0x148 mm/page-writeback.c:2329
 blkdev_writepages+0x2c/0x38 fs/block_dev.c:2114
 do_writepages+0xd4/0x250 mm/page-writeback.c:2344

The reason for triggering this warning is __block_write_full_page()
-> i_size_read(inode) - 1 overflow.
inode->i_size is assigned in __nbd_ioctl() -> nbd_set_size() -> bytesize.
We think it is necessary to limit the size of arg to prevent errors.

Moreover, __nbd_ioctl() -> nbd_add_socket(), arg will be cast to int.
Assuming the value of arg is 0x80000000000000001) (on a 64-bit machine),
it will become 1 after the coercion, which will return unexpected results.

Fix it by adding checks to prevent passing in too large numbers.

Signed-off-by: Zhong Jinghua <zhongjinghua@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20230206145805.2645671-1-zhongjinghua@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/nbd.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 592cfa8b765a5..e1c954094b6c0 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -325,6 +325,9 @@ static int nbd_set_size(struct nbd_device *nbd, loff_t bytesize,
 	if (blk_validate_block_size(blksize))
 		return -EINVAL;
 
+	if (bytesize < 0)
+		return -EINVAL;
+
 	nbd->config->bytesize = bytesize;
 	nbd->config->blksize_bits = __ffs(blksize);
 
@@ -1111,6 +1114,9 @@ static int nbd_add_socket(struct nbd_device *nbd, unsigned long arg,
 	struct nbd_sock *nsock;
 	int err;
 
+	/* Arg will be cast to int, check it to avoid overflow */
+	if (arg > INT_MAX)
+		return -EINVAL;
 	sock = nbd_get_socket(nbd, arg, &err);
 	if (!sock)
 		return err;
-- 
2.39.2

[PATCH AUTOSEL 6.3 49/59] ipvs: Update width of source for ip_vs_sync_conn_options

[Sasha Levin]

From: Simon Horman <horms@kernel.org>

[ Upstream commit e3478c68f6704638d08f437cbc552ca5970c151a ]

In ip_vs_sync_conn_v0() copy is made to struct ip_vs_sync_conn_options.
That structure looks like this:

struct ip_vs_sync_conn_options {
        struct ip_vs_seq        in_seq;
        struct ip_vs_seq        out_seq;
};

The source of the copy is the in_seq field of struct ip_vs_conn.  Whose
type is struct ip_vs_seq. Thus we can see that the source - is not as
wide as the amount of data copied, which is the width of struct
ip_vs_sync_conn_option.

The copy is safe because the next field in is another struct ip_vs_seq.
Make use of struct_group() to annotate this.

Flagged by gcc-13 as:

 In file included from ./include/linux/string.h:254,
                  from ./include/linux/bitmap.h:11,
                  from ./include/linux/cpumask.h:12,
                  from ./arch/x86/include/asm/paravirt.h:17,
                  from ./arch/x86/include/asm/cpuid.h:62,
                  from ./arch/x86/include/asm/processor.h:19,
                  from ./arch/x86/include/asm/timex.h:5,
                  from ./include/linux/timex.h:67,
                  from ./include/linux/time32.h:13,
                  from ./include/linux/time.h:60,
                  from ./include/linux/stat.h:19,
                  from ./include/linux/module.h:13,
                  from net/netfilter/ipvs/ip_vs_sync.c:38:
 In function 'fortify_memcpy_chk',
     inlined from 'ip_vs_sync_conn_v0' at net/netfilter/ipvs/ip_vs_sync.c:606:3:
 ./include/linux/fortify-string.h:529:25: error: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
   529 |                         __read_overflow2_field(q_size_field, size);
       |

Compile tested only.

Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/ip_vs.h             | 6 ++++--
 net/netfilter/ipvs/ip_vs_sync.c | 2 +-
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 6d71a5ff52dfd..e20f1f92066d1 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -630,8 +630,10 @@ struct ip_vs_conn {
 	 */
 	struct ip_vs_app        *app;           /* bound ip_vs_app object */
 	void                    *app_data;      /* Application private data */
-	struct ip_vs_seq        in_seq;         /* incoming seq. struct */
-	struct ip_vs_seq        out_seq;        /* outgoing seq. struct */
+	struct_group(sync_conn_opt,
+		struct ip_vs_seq  in_seq;       /* incoming seq. struct */
+		struct ip_vs_seq  out_seq;      /* outgoing seq. struct */
+	);
 
 	const struct ip_vs_pe	*pe;
 	char			*pe_data;
diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c
index 4963fec815da3..d4fe7bb4f853a 100644
--- a/net/netfilter/ipvs/ip_vs_sync.c
+++ b/net/netfilter/ipvs/ip_vs_sync.c
@@ -603,7 +603,7 @@ static void ip_vs_sync_conn_v0(struct netns_ipvs *ipvs, struct ip_vs_conn *cp,
 	if (cp->flags & IP_VS_CONN_F_SEQ_MASK) {
 		struct ip_vs_sync_conn_options *opt =
 			(struct ip_vs_sync_conn_options *)&s[1];
-		memcpy(opt, &cp->in_seq, sizeof(*opt));
+		memcpy(opt, &cp->sync_conn_opt, sizeof(*opt));
 	}
 
 	m->nr_conns++;
-- 
2.39.2

[PATCH AUTOSEL 6.3 50/59] Bluetooth: btusb: Add new PID/VID 04ca:3801 for MT7663

[Sasha Levin]

From: Meng Tang <tangmeng@uniontech.com>

[ Upstream commit 13209415d0e88396d99d346b184864834d70d68a ]

This bluetooth device is found in a combo WLAN/BT card
for a MediaTek 7663.

Tested on Acer Aspire A315-24P Notebook

The device information:

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04ca ProdID=3801 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms

Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btusb.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 5c536151ef836..683556dcdc436 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -558,6 +558,9 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x043e, 0x310c), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH |
 						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x04ca, 0x3801), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
 
 	/* Additional MediaTek MT7668 Bluetooth devices */
 	{ USB_DEVICE(0x043e, 0x3109), .driver_info = BTUSB_MEDIATEK |
-- 
2.39.2

[PATCH AUTOSEL 6.3 51/59] Bluetooth: Add new quirk for broken local ext features page 2

[Sasha Levin]

From: Vasily Khoruzhick <anarsoul@gmail.com>

[ Upstream commit 8194f1ef5a815aea815a91daf2c721eab2674f1f ]

Some adapters (e.g. RTL8723CS) advertise that they have more than
2 pages for local ext features, but they don't support any features
declared in these pages. RTL8723CS reports max_page = 2 and declares
support for sync train and secure connection, but it responds with
either garbage or with error in status on corresponding commands.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Bastian Germann <bage@debian.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/bluetooth/hci.h | 7 +++++++
 net/bluetooth/hci_event.c   | 9 +++++++--
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 400f8a7d0c3fe..997107bfc0b12 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -294,6 +294,13 @@ enum {
 	 * during the hdev->setup vendor callback.
 	 */
 	HCI_QUIRK_BROKEN_MWS_TRANSPORT_CONFIG,
+
+	/* When this quirk is set, max_page for local extended features
+	 * is set to 1, even if controller reports higher number. Some
+	 * controllers (e.g. RTL8723CS) report more pages, but they
+	 * don't actually support features declared there.
+	 */
+	HCI_QUIRK_BROKEN_LOCAL_EXT_FEATURES_PAGE_2,
 };
 
 /* HCI device flags */
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index e87c928c9e17a..51f13518dba9b 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -886,8 +886,13 @@ static u8 hci_cc_read_local_ext_features(struct hci_dev *hdev, void *data,
 	if (rp->status)
 		return rp->status;
 
-	if (hdev->max_page < rp->max_page)
-		hdev->max_page = rp->max_page;
+	if (hdev->max_page < rp->max_page) {
+		if (test_bit(HCI_QUIRK_BROKEN_LOCAL_EXT_FEATURES_PAGE_2,
+			     &hdev->quirks))
+			bt_dev_warn(hdev, "broken local ext features page 2");
+		else
+			hdev->max_page = rp->max_page;
+	}
 
 	if (rp->page < HCI_MAX_PAGES)
 		memcpy(hdev->features[rp->page], rp->features, 8);
-- 
2.39.2

[PATCH AUTOSEL 6.3 52/59] Bluetooth: btrtl: add support for the RTL8723CS

[Sasha Levin]

From: Vasily Khoruzhick <anarsoul@gmail.com>

[ Upstream commit c0123cb6c4c7fc2a42ead6cd7d3e82b8e1c25c6f ]

The Realtek RTL8723CS is a SDIO WiFi chip. It also contains a Bluetooth
module which is connected via UART to the host.

It shares lmp subversion with 8703B, so Realtek's userspace
initialization tool (rtk_hciattach) differentiates varieties of RTL8723CS
(CG, VF, XX) with RTL8703B using vendor's command to read chip type.

Also this chip declares support for some features it doesn't support
so add a quirk to indicate that these features are broken.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Bastian Germann <bage@debian.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btrtl.c  | 120 +++++++++++++++++++++++++++++++++++--
 drivers/bluetooth/btrtl.h  |   5 ++
 drivers/bluetooth/hci_h5.c |   4 ++
 3 files changed, 125 insertions(+), 4 deletions(-)

diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 69c3fe649ca7d..44b672cca69ee 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -17,7 +17,11 @@
 
 #define VERSION "0.1"
 
+#define RTL_CHIP_8723CS_CG	3
+#define RTL_CHIP_8723CS_VF	4
+#define RTL_CHIP_8723CS_XX	5
 #define RTL_EPATCH_SIGNATURE	"Realtech"
+#define RTL_ROM_LMP_8703B	0x8703
 #define RTL_ROM_LMP_8723A	0x1200
 #define RTL_ROM_LMP_8723B	0x8723
 #define RTL_ROM_LMP_8821A	0x8821
@@ -30,6 +34,7 @@
 #define IC_MATCH_FL_HCIREV	(1 << 1)
 #define IC_MATCH_FL_HCIVER	(1 << 2)
 #define IC_MATCH_FL_HCIBUS	(1 << 3)
+#define IC_MATCH_FL_CHIP_TYPE	(1 << 4)
 #define IC_INFO(lmps, hcir, hciv, bus) \
 	.match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV | \
 		       IC_MATCH_FL_HCIVER | IC_MATCH_FL_HCIBUS, \
@@ -59,6 +64,7 @@ struct id_table {
 	__u16 hci_rev;
 	__u8 hci_ver;
 	__u8 hci_bus;
+	__u8 chip_type;
 	bool config_needed;
 	bool has_rom_version;
 	bool has_msft_ext;
@@ -99,6 +105,39 @@ static const struct id_table ic_id_table[] = {
 	  .fw_name  = "rtl_bt/rtl8723b_fw.bin",
 	  .cfg_name = "rtl_bt/rtl8723b_config" },
 
+	/* 8723CS-CG */
+	{ .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_CHIP_TYPE |
+			 IC_MATCH_FL_HCIBUS,
+	  .lmp_subver = RTL_ROM_LMP_8703B,
+	  .chip_type = RTL_CHIP_8723CS_CG,
+	  .hci_bus = HCI_UART,
+	  .config_needed = true,
+	  .has_rom_version = true,
+	  .fw_name  = "rtl_bt/rtl8723cs_cg_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8723cs_cg_config" },
+
+	/* 8723CS-VF */
+	{ .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_CHIP_TYPE |
+			 IC_MATCH_FL_HCIBUS,
+	  .lmp_subver = RTL_ROM_LMP_8703B,
+	  .chip_type = RTL_CHIP_8723CS_VF,
+	  .hci_bus = HCI_UART,
+	  .config_needed = true,
+	  .has_rom_version = true,
+	  .fw_name  = "rtl_bt/rtl8723cs_vf_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8723cs_vf_config" },
+
+	/* 8723CS-XX */
+	{ .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_CHIP_TYPE |
+			 IC_MATCH_FL_HCIBUS,
+	  .lmp_subver = RTL_ROM_LMP_8703B,
+	  .chip_type = RTL_CHIP_8723CS_XX,
+	  .hci_bus = HCI_UART,
+	  .config_needed = true,
+	  .has_rom_version = true,
+	  .fw_name  = "rtl_bt/rtl8723cs_xx_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8723cs_xx_config" },
+
 	/* 8723D */
 	{ IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_USB),
 	  .config_needed = true,
@@ -208,7 +247,8 @@ static const struct id_table ic_id_table[] = {
 	};
 
 static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev,
-					     u8 hci_ver, u8 hci_bus)
+					     u8 hci_ver, u8 hci_bus,
+					     u8 chip_type)
 {
 	int i;
 
@@ -225,6 +265,9 @@ static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev,
 		if ((ic_id_table[i].match_flags & IC_MATCH_FL_HCIBUS) &&
 		    (ic_id_table[i].hci_bus != hci_bus))
 			continue;
+		if ((ic_id_table[i].match_flags & IC_MATCH_FL_CHIP_TYPE) &&
+		    (ic_id_table[i].chip_type != chip_type))
+			continue;
 
 		break;
 	}
@@ -307,6 +350,7 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev,
 		{ RTL_ROM_LMP_8723B, 1 },
 		{ RTL_ROM_LMP_8821A, 2 },
 		{ RTL_ROM_LMP_8761A, 3 },
+		{ RTL_ROM_LMP_8703B, 7 },
 		{ RTL_ROM_LMP_8822B, 8 },
 		{ RTL_ROM_LMP_8723B, 9 },	/* 8723D */
 		{ RTL_ROM_LMP_8821A, 10 },	/* 8821C */
@@ -587,6 +631,48 @@ static int btrtl_setup_rtl8723b(struct hci_dev *hdev,
 	return ret;
 }
 
+static bool rtl_has_chip_type(u16 lmp_subver)
+{
+	switch (lmp_subver) {
+	case RTL_ROM_LMP_8703B:
+		return true;
+	default:
+		break;
+	}
+
+	return  false;
+}
+
+static int rtl_read_chip_type(struct hci_dev *hdev, u8 *type)
+{
+	struct rtl_chip_type_evt *chip_type;
+	struct sk_buff *skb;
+	const unsigned char cmd_buf[] = {0x00, 0x94, 0xa0, 0x00, 0xb0};
+
+	/* Read RTL chip type command */
+	skb = __hci_cmd_sync(hdev, 0xfc61, 5, cmd_buf, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		rtl_dev_err(hdev, "Read chip type failed (%ld)",
+			    PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+
+	chip_type = skb_pull_data(skb, sizeof(*chip_type));
+	if (!chip_type) {
+		rtl_dev_err(hdev, "RTL chip type event length mismatch");
+		kfree_skb(skb);
+		return -EIO;
+	}
+
+	rtl_dev_info(hdev, "chip_type status=%x type=%x",
+		     chip_type->status, chip_type->type);
+
+	*type = chip_type->type & 0x0f;
+
+	kfree_skb(skb);
+	return 0;
+}
+
 void btrtl_free(struct btrtl_device_info *btrtl_dev)
 {
 	kvfree(btrtl_dev->fw_data);
@@ -603,7 +689,7 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
 	struct hci_rp_read_local_version *resp;
 	char cfg_name[40];
 	u16 hci_rev, lmp_subver;
-	u8 hci_ver;
+	u8 hci_ver, chip_type = 0;
 	int ret;
 	u16 opcode;
 	u8 cmd[2];
@@ -629,8 +715,14 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
 	hci_rev = le16_to_cpu(resp->hci_rev);
 	lmp_subver = le16_to_cpu(resp->lmp_subver);
 
+	if (rtl_has_chip_type(lmp_subver)) {
+		ret = rtl_read_chip_type(hdev, &chip_type);
+		if (ret)
+			goto err_free;
+	}
+
 	btrtl_dev->ic_info = btrtl_match_ic(lmp_subver, hci_rev, hci_ver,
-					    hdev->bus);
+					    hdev->bus, chip_type);
 
 	if (!btrtl_dev->ic_info)
 		btrtl_dev->drop_fw = true;
@@ -673,7 +765,7 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
 		lmp_subver = le16_to_cpu(resp->lmp_subver);
 
 		btrtl_dev->ic_info = btrtl_match_ic(lmp_subver, hci_rev, hci_ver,
-						    hdev->bus);
+						    hdev->bus, chip_type);
 	}
 out_free:
 	kfree_skb(skb);
@@ -755,6 +847,7 @@ int btrtl_download_firmware(struct hci_dev *hdev,
 	case RTL_ROM_LMP_8761A:
 	case RTL_ROM_LMP_8822B:
 	case RTL_ROM_LMP_8852A:
+	case RTL_ROM_LMP_8703B:
 		return btrtl_setup_rtl8723b(hdev, btrtl_dev);
 	default:
 		rtl_dev_info(hdev, "assuming no firmware upload needed");
@@ -795,6 +888,19 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)
 		rtl_dev_dbg(hdev, "WBS supported not enabled.");
 		break;
 	}
+
+	switch (btrtl_dev->ic_info->lmp_subver) {
+	case RTL_ROM_LMP_8703B:
+		/* 8723CS reports two pages for local ext features,
+		 * but it doesn't support any features from page 2 -
+		 * it either responds with garbage or with error status
+		 */
+		set_bit(HCI_QUIRK_BROKEN_LOCAL_EXT_FEATURES_PAGE_2,
+			&hdev->quirks);
+		break;
+	default:
+		break;
+	}
 }
 EXPORT_SYMBOL_GPL(btrtl_set_quirks);
 
@@ -953,6 +1059,12 @@ MODULE_FIRMWARE("rtl_bt/rtl8723b_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8723b_config.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8723bs_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8723bs_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723cs_cg_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723cs_cg_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723cs_vf_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723cs_vf_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723cs_xx_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723cs_xx_config.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8723ds_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8723ds_config.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8761a_fw.bin");
diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h
index ebf0101c959b0..349d72ee571b6 100644
--- a/drivers/bluetooth/btrtl.h
+++ b/drivers/bluetooth/btrtl.h
@@ -14,6 +14,11 @@
 
 struct btrtl_device_info;
 
+struct rtl_chip_type_evt {
+	__u8 status;
+	__u8 type;
+} __packed;
+
 struct rtl_download_cmd {
 	__u8 index;
 	__u8 data[RTL_FRAG_LEN];
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index 6455bc4fb5bb3..e90670955df2c 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -936,6 +936,8 @@ static int h5_btrtl_setup(struct h5 *h5)
 	err = btrtl_download_firmware(h5->hu->hdev, btrtl_dev);
 	/* Give the device some time before the hci-core sends it a reset */
 	usleep_range(10000, 20000);
+	if (err)
+		goto out_free;
 
 	btrtl_set_quirks(h5->hu->hdev, btrtl_dev);
 
@@ -1100,6 +1102,8 @@ static const struct of_device_id rtl_bluetooth_of_match[] = {
 	  .data = (const void *)&h5_data_rtl8822cs },
 	{ .compatible = "realtek,rtl8723bs-bt",
 	  .data = (const void *)&h5_data_rtl8723bs },
+	{ .compatible = "realtek,rtl8723cs-bt",
+	  .data = (const void *)&h5_data_rtl8723bs },
 	{ .compatible = "realtek,rtl8723ds-bt",
 	  .data = (const void *)&h5_data_rtl8723bs },
 #endif
-- 
2.39.2

[PATCH AUTOSEL 6.3 53/59] Bluetooth: Improve support for Actions Semi ATS2851 based devices

[Sasha Levin]

From: Raul Cheleguini <rcheleguini@google.com>

[ Upstream commit 7c2b2d2d0cb658aa543e11e90ae95621d3cb5fe6 ]

Add two more quirks to resume the device initialization and basic
operation as the device seems not to support "Read Transmit Power"
and "Set Extended Scan Parameters".

< HCI Command: LE Read Transmit Power (0x08|0x004b) plen 0
> HCI Event: Command Status (0x0f) plen 4
      LE Read Transmit Power (0x08|0x004b) ncmd 1
        Status: Unknown HCI Command (0x01)

< HCI Command: LE Set Extended Scan Parameters (0x08|0x0041) plen 8
        Own address type: Random (0x01)
        Filter policy: Accept all advertisement (0x00)
        PHYs: 0x01
        Entry 0: LE 1M
          Type: Active (0x01)
          Interval: 11.250 msec (0x0012)
          Window: 11.250 msec (0x0012)
> HCI Event: Command Status (0x0f) plen 4
      LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1
        Status: Unknown HCI Command (0x01)

Signed-off-by: Raul Cheleguini <rcheleguini@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 683556dcdc436..1ab5663b009d8 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -4105,6 +4105,8 @@ static int btusb_probe(struct usb_interface *intf,
 	if (id->driver_info & BTUSB_ACTIONS_SEMI) {
 		/* Support is advertised, but not implemented */
 		set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks);
+		set_bit(HCI_QUIRK_BROKEN_READ_TRANSMIT_POWER, &hdev->quirks);
+		set_bit(HCI_QUIRK_BROKEN_EXT_SCAN, &hdev->quirks);
 	}
 
 	if (!reset)
-- 
2.39.2

[PATCH AUTOSEL 6.3 54/59] Bluetooth: btrtl: check for NULL in btrtl_set_quirks()

[Sasha Levin]

From: Max Chou <max.chou@realtek.com>

[ Upstream commit 253cf30e8d3d001850a95c4729d668f916b037ab ]

The btrtl_set_quirks() has accessed btrtl_dev->ic_info->lmp_subver since
b8e482d02513. However, if installing a Realtek Bluetooth controller
without the driver supported, it will hit the NULL point accessed.

Add a check for NULL to avoid the Kernel Oops.

Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btrtl.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 44b672cca69ee..7061621faeb0c 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -889,6 +889,9 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)
 		break;
 	}
 
+	if (!btrtl_dev->ic_info)
+		return;
+
 	switch (btrtl_dev->ic_info->lmp_subver) {
 	case RTL_ROM_LMP_8703B:
 		/* 8723CS reports two pages for local ext features,
-- 
2.39.2

[PATCH AUTOSEL 6.3 55/59] Bluetooth: btintel: Add LE States quirk support

[Sasha Levin]

From: Chethan T N <chethan.tumkur.narayan@intel.com>

[ Upstream commit 77f542b10c535c9a93bf8afdd2665524935807c2 ]

Basically all Intel controllers support both Central/Peripheral
LE states.

This patch enables the LE States quirk by default on all
Solar and Magnertor Intel controllers.

Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btintel.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index af774688f1c0d..7a6dc05553f13 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -2684,9 +2684,8 @@ static int btintel_setup_combined(struct hci_dev *hdev)
 		 */
 		set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
 
-		/* Valid LE States quirk for GfP */
-		if (INTEL_HW_VARIANT(ver_tlv.cnvi_bt) == 0x18)
-			set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
+		/* Apply LE States quirk from solar onwards */
+		set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
 
 		/* Setup MSFT Extension support */
 		btintel_set_msft_opcode(hdev,
-- 
2.39.2

[PATCH AUTOSEL 6.3 56/59] Bluetooth: hci_bcm: Fall back to getting bdaddr from EFI if not set

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 0d218c3642b9ccf71f44987cd03c19320f3bd918 ]

On some devices the BCM Bluetooth adapter does not have a valid bdaddr set.

btbcm.c currently sets HCI_QUIRK_INVALID_BDADDR to indicate when this is
the case. But this requires users to manual setup a btaddr, by doing e.g.:

btmgmt -i hci0 public-addr 'B0:F1:EC:82:1D:B3'

Which means that Bluetooth will not work out of the box on such devices.
To avoid this (where possible) hci_bcm sets: HCI_QUIRK_USE_BDADDR_PROPERTY
which tries to get the bdaddr from devicetree.

But this only works on devicetree platforms. On UEFI based platforms
there is a special Broadcom UEFI variable which when present contains
the devices bdaddr, just like how there is another UEFI variable which
contains wifi nvram contents including the wifi MAC address.

Add support for getting the bdaddr from this Broadcom UEFI variable,
so that Bluetooth will work OOTB for users on devices where this
UEFI variable is present.

This fixes Bluetooth not working on for example Asus T100HA 2-in-1s.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btbcm.c | 47 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 44 insertions(+), 3 deletions(-)

diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index 43e98a598bd9a..de2ea589aa49b 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -6,6 +6,7 @@
  *  Copyright (C) 2015  Intel Corporation
  */
 
+#include <linux/efi.h>
 #include <linux/module.h>
 #include <linux/firmware.h>
 #include <linux/dmi.h>
@@ -34,6 +35,43 @@
 /* For kmalloc-ing the fw-name array instead of putting it on the stack */
 typedef char bcm_fw_name[BCM_FW_NAME_LEN];
 
+#ifdef CONFIG_EFI
+static int btbcm_set_bdaddr_from_efi(struct hci_dev *hdev)
+{
+	efi_guid_t guid = EFI_GUID(0x74b00bd9, 0x805a, 0x4d61, 0xb5, 0x1f,
+				   0x43, 0x26, 0x81, 0x23, 0xd1, 0x13);
+	bdaddr_t efi_bdaddr, bdaddr;
+	efi_status_t status;
+	unsigned long len;
+	int ret;
+
+	if (!efi_rt_services_supported(EFI_RT_SUPPORTED_GET_VARIABLE))
+		return -EOPNOTSUPP;
+
+	len = sizeof(efi_bdaddr);
+	status = efi.get_variable(L"BDADDR", &guid, NULL, &len, &efi_bdaddr);
+	if (status != EFI_SUCCESS)
+		return -ENXIO;
+
+	if (len != sizeof(efi_bdaddr))
+		return -EIO;
+
+	baswap(&bdaddr, &efi_bdaddr);
+
+	ret = btbcm_set_bdaddr(hdev, &bdaddr);
+	if (ret)
+		return ret;
+
+	bt_dev_info(hdev, "BCM: Using EFI device address (%pMR)", &bdaddr);
+	return 0;
+}
+#else
+static int btbcm_set_bdaddr_from_efi(struct hci_dev *hdev)
+{
+	return -EOPNOTSUPP;
+}
+#endif
+
 int btbcm_check_bdaddr(struct hci_dev *hdev)
 {
 	struct hci_rp_read_bd_addr *bda;
@@ -87,9 +125,12 @@ int btbcm_check_bdaddr(struct hci_dev *hdev)
 	    !bacmp(&bda->bdaddr, BDADDR_BCM4345C5) ||
 	    !bacmp(&bda->bdaddr, BDADDR_BCM43430A0) ||
 	    !bacmp(&bda->bdaddr, BDADDR_BCM43341B)) {
-		bt_dev_info(hdev, "BCM: Using default device address (%pMR)",
-			    &bda->bdaddr);
-		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+		/* Try falling back to BDADDR EFI variable */
+		if (btbcm_set_bdaddr_from_efi(hdev) != 0) {
+			bt_dev_info(hdev, "BCM: Using default device address (%pMR)",
+				    &bda->bdaddr);
+			set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+		}
 	}
 
 	kfree_skb(skb);
-- 
2.39.2

[PATCH AUTOSEL 6.3 57/59] Bluetooth: Add new quirk for broken set random RPA timeout for ATS2851

[Sasha Levin]

From: Raul Cheleguini <raul.cheleguini@gmail.com>

[ Upstream commit 91b6d02ddcd113352bdd895990b252065c596de7 ]

The ATS2851 based controller advertises support for command "LE Set Random
Private Address Timeout" but does not actually implement it, impeding the
controller initialization.

Add the quirk HCI_QUIRK_BROKEN_SET_RPA_TIMEOUT to unblock the controller
initialization.

< HCI Command: LE Set Resolvable Private... (0x08|0x002e) plen 2
        Timeout: 900 seconds
> HCI Event: Command Status (0x0f) plen 4
      LE Set Resolvable Private Address Timeout (0x08|0x002e) ncmd 1
        Status: Unknown HCI Command (0x01)

Co-developed-by: imoc <wzj9912@gmail.com>
Signed-off-by: imoc <wzj9912@gmail.com>
Signed-off-by: Raul Cheleguini <raul.cheleguini@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btusb.c   | 1 +
 include/net/bluetooth/hci.h | 8 ++++++++
 net/bluetooth/hci_sync.c    | 6 +++++-
 3 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 1ab5663b009d8..0923582299f3a 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -4106,6 +4106,7 @@ static int btusb_probe(struct usb_interface *intf,
 		/* Support is advertised, but not implemented */
 		set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks);
 		set_bit(HCI_QUIRK_BROKEN_READ_TRANSMIT_POWER, &hdev->quirks);
+		set_bit(HCI_QUIRK_BROKEN_SET_RPA_TIMEOUT, &hdev->quirks);
 		set_bit(HCI_QUIRK_BROKEN_EXT_SCAN, &hdev->quirks);
 	}
 
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 997107bfc0b12..07df96c47ef4f 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -301,6 +301,14 @@ enum {
 	 * don't actually support features declared there.
 	 */
 	HCI_QUIRK_BROKEN_LOCAL_EXT_FEATURES_PAGE_2,
+
+	/*
+	 * When this quirk is set, the HCI_OP_LE_SET_RPA_TIMEOUT command is
+	 * skipped during initialization. This is required for the Actions
+	 * Semiconductor ATS2851 based controllers, which erroneously claims
+	 * to support it.
+	 */
+	HCI_QUIRK_BROKEN_SET_RPA_TIMEOUT,
 };
 
 /* HCI device flags */
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index 632be12672887..b65ee3a32e5d7 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -4093,7 +4093,8 @@ static int hci_le_set_rpa_timeout_sync(struct hci_dev *hdev)
 {
 	__le16 timeout = cpu_to_le16(hdev->rpa_timeout);
 
-	if (!(hdev->commands[35] & 0x04))
+	if (!(hdev->commands[35] & 0x04) ||
+	    test_bit(HCI_QUIRK_BROKEN_SET_RPA_TIMEOUT, &hdev->quirks))
 		return 0;
 
 	return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_RPA_TIMEOUT,
@@ -4533,6 +4534,9 @@ static const struct {
 			 "HCI Set Event Filter command not supported."),
 	HCI_QUIRK_BROKEN(ENHANCED_SETUP_SYNC_CONN,
 			 "HCI Enhanced Setup Synchronous Connection command is "
+			 "advertised, but not supported."),
+	HCI_QUIRK_BROKEN(SET_RPA_TIMEOUT,
+			 "HCI LE Set Random Private Address Timeout command is "
 			 "advertised, but not supported.")
 };
 
-- 
2.39.2

[PATCH AUTOSEL 6.3 58/59] Bluetooth: L2CAP: fix "bad unlock balance" in l2cap_disconnect_rsp

[Sasha Levin]

From: Min Li <lm0963hack@gmail.com>

[ Upstream commit 25e97f7b1866e6b8503be349eeea44bb52d661ce ]

conn->chan_lock isn't acquired before l2cap_get_chan_by_scid,
if l2cap_get_chan_by_scid returns NULL, then 'bad unlock balance'
is triggered.

Reported-by: syzbot+9519d6b5b79cf7787cf3@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/000000000000894f5f05f95e9f4d@google.com/
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/l2cap_core.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 55a7226233f96..24d075282996c 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -4694,7 +4694,6 @@ static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn,
 
 	chan = l2cap_get_chan_by_scid(conn, scid);
 	if (!chan) {
-		mutex_unlock(&conn->chan_lock);
 		return 0;
 	}
 
-- 
2.39.2

[PATCH AUTOSEL 6.3 59/59] Bluetooth: btrtl: Add the support for RTL8851B

[Sasha Levin]

From: Max Chou <max.chou@realtek.com>

[ Upstream commit 7948fe1c92d92313eea5453f83deb7f0141355e8 ]

Add the support for RTL8851B BT controller on USB interface.
The necessary firmware will be submitted to linux-firmware project.

Note that the Bluetooth devices WITH the VID=0x0bda would be set the
feature quirk in btrtl_setup_realtek(). It's able to ignore the
feature flag set for the specific VID and PID in blacklist_table[] of
btusb.c. (check [1])

If Realtek Bluetooth chips WITHOUT the VID=0x0bda, it shall be added
the feature flag for the specific VID and PID in blacklist_table[] of
btusb.c. (check [2])

[1] '9ab9235fe5cf ("Bluetooth: btrtl: Enable WBS for the specific
    Realtek devices")'
[2] '73280f13c9bb ("Bluetooth: btusb: Add the more support IDs for
    Realtek RTL8822CE")'

The device info from /sys/kernel/debug/usb/devices as below.

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 33 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0bda ProdID=b851 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=802.11ax WLAN Adapter
S:  SerialNumber=00E04C885A01
C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btrtl.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 7061621faeb0c..4fbb282cac4b5 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -28,6 +28,7 @@
 #define RTL_ROM_LMP_8761A	0x8761
 #define RTL_ROM_LMP_8822B	0x8822
 #define RTL_ROM_LMP_8852A	0x8852
+#define RTL_ROM_LMP_8851B	0x8851
 #define RTL_CONFIG_MAGIC	0x8723ab55
 
 #define IC_MATCH_FL_LMPSUBV	(1 << 0)
@@ -56,6 +57,7 @@ enum btrtl_chip_id {
 	CHIP_ID_8852A = 18,
 	CHIP_ID_8852B = 20,
 	CHIP_ID_8852C = 25,
+	CHIP_ID_8851B = 36,
 };
 
 struct id_table {
@@ -244,6 +246,14 @@ static const struct id_table ic_id_table[] = {
 	  .has_msft_ext = true,
 	  .fw_name  = "rtl_bt/rtl8852cu_fw.bin",
 	  .cfg_name = "rtl_bt/rtl8852cu_config" },
+
+	/* 8851B */
+	{ IC_INFO(RTL_ROM_LMP_8851B, 0xb, 0xc, HCI_USB),
+	  .config_needed = false,
+	  .has_rom_version = true,
+	  .has_msft_ext = false,
+	  .fw_name  = "rtl_bt/rtl8851bu_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8851bu_config" },
 	};
 
 static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev,
@@ -359,6 +369,7 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev,
 		{ RTL_ROM_LMP_8852A, 18 },	/* 8852A */
 		{ RTL_ROM_LMP_8852A, 20 },	/* 8852B */
 		{ RTL_ROM_LMP_8852A, 25 },	/* 8852C */
+		{ RTL_ROM_LMP_8851B, 36 },	/* 8851B */
 	};
 
 	min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3;
@@ -848,6 +859,7 @@ int btrtl_download_firmware(struct hci_dev *hdev,
 	case RTL_ROM_LMP_8822B:
 	case RTL_ROM_LMP_8852A:
 	case RTL_ROM_LMP_8703B:
+	case RTL_ROM_LMP_8851B:
 		return btrtl_setup_rtl8723b(hdev, btrtl_dev);
 	default:
 		rtl_dev_info(hdev, "assuming no firmware upload needed");
@@ -872,6 +884,7 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)
 	case CHIP_ID_8852A:
 	case CHIP_ID_8852B:
 	case CHIP_ID_8852C:
+	case CHIP_ID_8851B:
 		set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
 		set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
 
@@ -1082,3 +1095,5 @@ MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8851bu_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8851bu_config.bin");
-- 
2.39.2