FAILED: patch "[PATCH] cpufreq: amd-pstate: Update policy->cur in" failed to apply to 6.3-stable tree

FAILED: patch "[PATCH] cpufreq: amd-pstate: Update policy->cur in" failed to apply to 6.3-stable tree

[gregkh]

The patch below does not apply to the 6.3-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.3.y
git checkout FETCH_HEAD
git cherry-pick -x 3bf8c6307bad5c0cc09cde982e146d847859b651
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2023052831-chest-shabby-7961@gregkh' --subject-prefix 'PATCH 6.3.y' HEAD^..

Possible dependencies:

3bf8c6307bad ("cpufreq: amd-pstate: Update policy->cur in amd_pstate_adjust_perf()")
2dd6d0ebf740 ("cpufreq: amd-pstate: Add guided autonomous mode")
3e6e07805764 ("Documentation: cpufreq: amd-pstate: Move amd_pstate param to alphabetical order")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 3bf8c6307bad5c0cc09cde982e146d847859b651 Mon Sep 17 00:00:00 2001
From: Wyes Karny <wyes.karny@amd.com>
Date: Thu, 18 May 2023 05:58:19 +0000
Subject: [PATCH] cpufreq: amd-pstate: Update policy->cur in
 amd_pstate_adjust_perf()

Driver should update policy->cur after updating the frequency.
Currently amd_pstate doesn't update policy->cur when `adjust_perf`
is used. Which causes /proc/cpuinfo to show wrong cpu frequency.
Fix this by updating policy->cur with correct frequency value in
adjust_perf function callback.

- Before the fix: (setting min freq to 1.5 MHz)

[root@amd]# cat /proc/cpuinfo | grep "cpu MHz" | sort | uniq --count
      1 cpu MHz         : 1777.016
      1 cpu MHz         : 1797.160
      1 cpu MHz         : 1797.270
    189 cpu MHz         : 400.000

- After the fix: (setting min freq to 1.5 MHz)

[root@amd]# cat /proc/cpuinfo | grep "cpu MHz" | sort | uniq --count
      1 cpu MHz         : 1753.353
      1 cpu MHz         : 1756.838
      1 cpu MHz         : 1776.466
      1 cpu MHz         : 1776.873
      1 cpu MHz         : 1777.308
      1 cpu MHz         : 1779.900
    183 cpu MHz         : 1805.231
      1 cpu MHz         : 1956.815
      1 cpu MHz         : 2246.203
      1 cpu MHz         : 2259.984

Fixes: 1d215f0319c2 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State")
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
[ rjw: Subject edits ]
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
index ac54779f5a49..ddd346a239e0 100644
--- a/drivers/cpufreq/amd-pstate.c
+++ b/drivers/cpufreq/amd-pstate.c
@@ -501,12 +501,14 @@ static void amd_pstate_adjust_perf(unsigned int cpu,
 				   unsigned long capacity)
 {
 	unsigned long max_perf, min_perf, des_perf,
-		      cap_perf, lowest_nonlinear_perf;
+		      cap_perf, lowest_nonlinear_perf, max_freq;
 	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
 	struct amd_cpudata *cpudata = policy->driver_data;
+	unsigned int target_freq;
 
 	cap_perf = READ_ONCE(cpudata->highest_perf);
 	lowest_nonlinear_perf = READ_ONCE(cpudata->lowest_nonlinear_perf);
+	max_freq = READ_ONCE(cpudata->max_freq);
 
 	des_perf = cap_perf;
 	if (target_perf < capacity)
@@ -523,6 +525,10 @@ static void amd_pstate_adjust_perf(unsigned int cpu,
 	if (max_perf < min_perf)
 		max_perf = min_perf;
 
+	des_perf = clamp_t(unsigned long, des_perf, min_perf, max_perf);
+	target_freq = div_u64(des_perf * max_freq, max_perf);
+	policy->cur = target_freq;
+
 	amd_pstate_update(cpudata, min_perf, des_perf, max_perf, true,
 			policy->governor->flags);
 	cpufreq_cpu_put(policy);

FAILED: patch "[PATCH] cpufreq: amd-pstate: Update policy->cur in" failed to apply to 6.3-stable tree

[gregkh]

The patch below does not apply to the 6.3-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.3.y
git checkout FETCH_HEAD
git cherry-pick -x 3bf8c6307bad5c0cc09cde982e146d847859b651
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2023052834-enlighten-vacate-bfd6@gregkh' --subject-prefix 'PATCH 6.3.y' HEAD^..

Possible dependencies:

3bf8c6307bad ("cpufreq: amd-pstate: Update policy->cur in amd_pstate_adjust_perf()")
2dd6d0ebf740 ("cpufreq: amd-pstate: Add guided autonomous mode")
3e6e07805764 ("Documentation: cpufreq: amd-pstate: Move amd_pstate param to alphabetical order")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 3bf8c6307bad5c0cc09cde982e146d847859b651 Mon Sep 17 00:00:00 2001
From: Wyes Karny <wyes.karny@amd.com>
Date: Thu, 18 May 2023 05:58:19 +0000
Subject: [PATCH] cpufreq: amd-pstate: Update policy->cur in
 amd_pstate_adjust_perf()

Driver should update policy->cur after updating the frequency.
Currently amd_pstate doesn't update policy->cur when `adjust_perf`
is used. Which causes /proc/cpuinfo to show wrong cpu frequency.
Fix this by updating policy->cur with correct frequency value in
adjust_perf function callback.

- Before the fix: (setting min freq to 1.5 MHz)

[root@amd]# cat /proc/cpuinfo | grep "cpu MHz" | sort | uniq --count
      1 cpu MHz         : 1777.016
      1 cpu MHz         : 1797.160
      1 cpu MHz         : 1797.270
    189 cpu MHz         : 400.000

- After the fix: (setting min freq to 1.5 MHz)

[root@amd]# cat /proc/cpuinfo | grep "cpu MHz" | sort | uniq --count
      1 cpu MHz         : 1753.353
      1 cpu MHz         : 1756.838
      1 cpu MHz         : 1776.466
      1 cpu MHz         : 1776.873
      1 cpu MHz         : 1777.308
      1 cpu MHz         : 1779.900
    183 cpu MHz         : 1805.231
      1 cpu MHz         : 1956.815
      1 cpu MHz         : 2246.203
      1 cpu MHz         : 2259.984

Fixes: 1d215f0319c2 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State")
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
[ rjw: Subject edits ]
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
index ac54779f5a49..ddd346a239e0 100644
--- a/drivers/cpufreq/amd-pstate.c
+++ b/drivers/cpufreq/amd-pstate.c
@@ -501,12 +501,14 @@ static void amd_pstate_adjust_perf(unsigned int cpu,
 				   unsigned long capacity)
 {
 	unsigned long max_perf, min_perf, des_perf,
-		      cap_perf, lowest_nonlinear_perf;
+		      cap_perf, lowest_nonlinear_perf, max_freq;
 	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
 	struct amd_cpudata *cpudata = policy->driver_data;
+	unsigned int target_freq;
 
 	cap_perf = READ_ONCE(cpudata->highest_perf);
 	lowest_nonlinear_perf = READ_ONCE(cpudata->lowest_nonlinear_perf);
+	max_freq = READ_ONCE(cpudata->max_freq);
 
 	des_perf = cap_perf;
 	if (target_perf < capacity)
@@ -523,6 +525,10 @@ static void amd_pstate_adjust_perf(unsigned int cpu,
 	if (max_perf < min_perf)
 		max_perf = min_perf;
 
+	des_perf = clamp_t(unsigned long, des_perf, min_perf, max_perf);
+	target_freq = div_u64(des_perf * max_freq, max_perf);
+	policy->cur = target_freq;
+
 	amd_pstate_update(cpudata, min_perf, des_perf, max_perf, true,
 			policy->governor->flags);
 	cpufreq_cpu_put(policy);

[PATCH 6.3.y] cpufreq: amd-pstate: Add ->fast_switch() callback

[Wyes Karny]

From: "Gautham R. Shenoy" <gautham.shenoy@amd.com>

[ Upstream commit 3bf8c6307bad5c0cc09cde982e146d847859b651 ]

Schedutil normally calls the adjust_perf callback for drivers with
adjust_perf callback available and fast_switch_possible flag set.
However, when frequency invariance is disabled and schedutil tries to
invoke fast_switch. So, there is a chance of kernel crash if this
function pointer is not set. To protect against this scenario add
fast_switch callback to amd_pstate driver.

Fixes: 1d215f0319c2 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State")
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 4badf2eb1e986bdbf34dd2f5d4c979553a86fe54)
---
 drivers/cpufreq/amd-pstate.c | 37 +++++++++++++++++++++++++++++-------
 1 file changed, 30 insertions(+), 7 deletions(-)

diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
index 8dd46fad151e..7cce90d16b8d 100644
--- a/drivers/cpufreq/amd-pstate.c
+++ b/drivers/cpufreq/amd-pstate.c
@@ -422,9 +422,8 @@ static int amd_pstate_verify(struct cpufreq_policy_data *policy)
 	return 0;
 }
 
-static int amd_pstate_target(struct cpufreq_policy *policy,
-			     unsigned int target_freq,
-			     unsigned int relation)
+static int amd_pstate_update_freq(struct cpufreq_policy *policy,
+				  unsigned int target_freq, bool fast_switch)
 {
 	struct cpufreq_freqs freqs;
 	struct amd_cpudata *cpudata = policy->driver_data;
@@ -443,14 +442,36 @@ static int amd_pstate_target(struct cpufreq_policy *policy,
 	des_perf = DIV_ROUND_CLOSEST(target_freq * cap_perf,
 				     cpudata->max_freq);
 
-	cpufreq_freq_transition_begin(policy, &freqs);
-	amd_pstate_update(cpudata, min_perf, des_perf,
-			  max_perf, false);
-	cpufreq_freq_transition_end(policy, &freqs, false);
+	WARN_ON(fast_switch && !policy->fast_switch_enabled);
+	/*
+	 * If fast_switch is desired, then there aren't any registered
+	 * transition notifiers. See comment for
+	 * cpufreq_enable_fast_switch().
+	 */
+	if (!fast_switch)
+		cpufreq_freq_transition_begin(policy, &freqs);
+
+	amd_pstate_update(cpudata, min_perf, des_perf, max_perf, fast_switch);
+
+	if (!fast_switch)
+		cpufreq_freq_transition_end(policy, &freqs, false);
 
 	return 0;
 }
 
+static int amd_pstate_target(struct cpufreq_policy *policy,
+			     unsigned int target_freq,
+			     unsigned int relation)
+{
+	return amd_pstate_update_freq(policy, target_freq, false);
+}
+
+static unsigned int amd_pstate_fast_switch(struct cpufreq_policy *policy,
+				  unsigned int target_freq)
+{
+	return amd_pstate_update_freq(policy, target_freq, true);
+}
+
 static void amd_pstate_adjust_perf(unsigned int cpu,
 				   unsigned long _min_perf,
 				   unsigned long target_perf,
@@ -692,6 +713,7 @@ static int amd_pstate_cpu_exit(struct cpufreq_policy *policy)
 
 	freq_qos_remove_request(&cpudata->req[1]);
 	freq_qos_remove_request(&cpudata->req[0]);
+	policy->fast_switch_possible = false;
 	kfree(cpudata);
 
 	return 0;
@@ -1226,6 +1248,7 @@ static struct cpufreq_driver amd_pstate_driver = {
 	.flags		= CPUFREQ_CONST_LOOPS | CPUFREQ_NEED_UPDATE_LIMITS,
 	.verify		= amd_pstate_verify,
 	.target		= amd_pstate_target,
+	.fast_switch    = amd_pstate_fast_switch,
 	.init		= amd_pstate_cpu_init,
 	.exit		= amd_pstate_cpu_exit,
 	.suspend	= amd_pstate_cpu_suspend,
-- 
2.34.1

Re: [PATCH 6.3.y] cpufreq: amd-pstate: Add ->fast_switch() callback

[Wyes Karny]

On 30 May 11:16, Wyes Karny wrote:
> From: "Gautham R. Shenoy" <gautham.shenoy@amd.com>
> 
> [ Upstream commit 3bf8c6307bad5c0cc09cde982e146d847859b651 ]
> 
> Schedutil normally calls the adjust_perf callback for drivers with
> adjust_perf callback available and fast_switch_possible flag set.
> However, when frequency invariance is disabled and schedutil tries to
> invoke fast_switch. So, there is a chance of kernel crash if this
> function pointer is not set. To protect against this scenario add
> fast_switch callback to amd_pstate driver.
> 
> Fixes: 1d215f0319c2 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State")
> Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
> Signed-off-by: Wyes Karny <wyes.karny@amd.com>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> (cherry picked from commit 4badf2eb1e986bdbf34dd2f5d4c979553a86fe54)
> ---
>  drivers/cpufreq/amd-pstate.c | 37 +++++++++++++++++++++++++++++-------
>  1 file changed, 30 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
> index 8dd46fad151e..7cce90d16b8d 100644
> --- a/drivers/cpufreq/amd-pstate.c
> +++ b/drivers/cpufreq/amd-pstate.c
> @@ -422,9 +422,8 @@ static int amd_pstate_verify(struct cpufreq_policy_data *policy)
>  	return 0;
>  }
>  
> -static int amd_pstate_target(struct cpufreq_policy *policy,
> -			     unsigned int target_freq,
> -			     unsigned int relation)
> +static int amd_pstate_update_freq(struct cpufreq_policy *policy,
> +				  unsigned int target_freq, bool fast_switch)
>  {
>  	struct cpufreq_freqs freqs;
>  	struct amd_cpudata *cpudata = policy->driver_data;
> @@ -443,14 +442,36 @@ static int amd_pstate_target(struct cpufreq_policy *policy,
>  	des_perf = DIV_ROUND_CLOSEST(target_freq * cap_perf,
>  				     cpudata->max_freq);
>  
> -	cpufreq_freq_transition_begin(policy, &freqs);
> -	amd_pstate_update(cpudata, min_perf, des_perf,
> -			  max_perf, false);
> -	cpufreq_freq_transition_end(policy, &freqs, false);
> +	WARN_ON(fast_switch && !policy->fast_switch_enabled);
> +	/*
> +	 * If fast_switch is desired, then there aren't any registered
> +	 * transition notifiers. See comment for
> +	 * cpufreq_enable_fast_switch().
> +	 */
> +	if (!fast_switch)
> +		cpufreq_freq_transition_begin(policy, &freqs);
> +
> +	amd_pstate_update(cpudata, min_perf, des_perf, max_perf, fast_switch);
> +
> +	if (!fast_switch)
> +		cpufreq_freq_transition_end(policy, &freqs, false);
>  
>  	return 0;
>  }
>  
> +static int amd_pstate_target(struct cpufreq_policy *policy,
> +			     unsigned int target_freq,
> +			     unsigned int relation)
> +{
> +	return amd_pstate_update_freq(policy, target_freq, false);
> +}
> +
> +static unsigned int amd_pstate_fast_switch(struct cpufreq_policy *policy,
> +				  unsigned int target_freq)
> +{
> +	return amd_pstate_update_freq(policy, target_freq, true);
> +}
> +
>  static void amd_pstate_adjust_perf(unsigned int cpu,
>  				   unsigned long _min_perf,
>  				   unsigned long target_perf,
> @@ -692,6 +713,7 @@ static int amd_pstate_cpu_exit(struct cpufreq_policy *policy)
>  
>  	freq_qos_remove_request(&cpudata->req[1]);
>  	freq_qos_remove_request(&cpudata->req[0]);
> +	policy->fast_switch_possible = false;
>  	kfree(cpudata);
>  
>  	return 0;
> @@ -1226,6 +1248,7 @@ static struct cpufreq_driver amd_pstate_driver = {
>  	.flags		= CPUFREQ_CONST_LOOPS | CPUFREQ_NEED_UPDATE_LIMITS,
>  	.verify		= amd_pstate_verify,
>  	.target		= amd_pstate_target,
> +	.fast_switch    = amd_pstate_fast_switch,
>  	.init		= amd_pstate_cpu_init,
>  	.exit		= amd_pstate_cpu_exit,
>  	.suspend	= amd_pstate_cpu_suspend,

Please ignore this. Wrong patch.
Sorry for inconvenience.

Thanks,
Wyes

> -- 
> 2.34.1
> 

[PATCH 6.3.y] cpufreq: amd-pstate: Update policy->cur in amd_pstate_adjust_perf()

[Wyes Karny]

[ Upstream commit 3bf8c6307bad5c0cc09cde982e146d847859b651 ]

Driver should update policy->cur after updating the frequency.
Currently amd_pstate doesn't update policy->cur when `adjust_perf`
is used. Which causes /proc/cpuinfo to show wrong cpu frequency.
Fix this by updating policy->cur with correct frequency value in
adjust_perf function callback.

- Before the fix: (setting min freq to 1.5 MHz)

[root@amd]# cat /proc/cpuinfo | grep "cpu MHz" | sort | uniq --count
      1 cpu MHz         : 1777.016
      1 cpu MHz         : 1797.160
      1 cpu MHz         : 1797.270
    189 cpu MHz         : 400.000

- After the fix: (setting min freq to 1.5 MHz)

[root@amd]# cat /proc/cpuinfo | grep "cpu MHz" | sort | uniq --count
      1 cpu MHz         : 1753.353
      1 cpu MHz         : 1756.838
      1 cpu MHz         : 1776.466
      1 cpu MHz         : 1776.873
      1 cpu MHz         : 1777.308
      1 cpu MHz         : 1779.900
    183 cpu MHz         : 1805.231
      1 cpu MHz         : 1956.815
      1 cpu MHz         : 2246.203
      1 cpu MHz         : 2259.984

Fixes: 1d215f0319c2 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State")
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
[ rjw: Subject edits ]
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 3bf8c6307bad5c0cc09cde982e146d847859b651)
---
 drivers/cpufreq/amd-pstate.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
index 8dd46fad151e..497bde9cb213 100644
--- a/drivers/cpufreq/amd-pstate.c
+++ b/drivers/cpufreq/amd-pstate.c
@@ -457,12 +457,14 @@ static void amd_pstate_adjust_perf(unsigned int cpu,
 				   unsigned long capacity)
 {
 	unsigned long max_perf, min_perf, des_perf,
-		      cap_perf, lowest_nonlinear_perf;
+		      cap_perf, lowest_nonlinear_perf, max_freq;
 	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
 	struct amd_cpudata *cpudata = policy->driver_data;
+	unsigned int target_freq;
 
 	cap_perf = READ_ONCE(cpudata->highest_perf);
 	lowest_nonlinear_perf = READ_ONCE(cpudata->lowest_nonlinear_perf);
+	max_freq = READ_ONCE(cpudata->max_freq);
 
 	des_perf = cap_perf;
 	if (target_perf < capacity)
@@ -479,6 +481,10 @@ static void amd_pstate_adjust_perf(unsigned int cpu,
 	if (max_perf < min_perf)
 		max_perf = min_perf;
 
+	des_perf = clamp_t(unsigned long, des_perf, min_perf, max_perf);
+	target_freq = div_u64(des_perf * max_freq, max_perf);
+	policy->cur = target_freq;
+
 	amd_pstate_update(cpudata, min_perf, des_perf, max_perf, true);
 	cpufreq_cpu_put(policy);
 }
-- 
2.34.1