FAILED: patch "[PATCH] selftests: mptcp: join: stop transfer when check is done" failed to apply to 6.7-stable tree

FAILED: patch "[PATCH] selftests: mptcp: join: stop transfer when check is done" failed to apply to 6.7-stable tree

[gregkh]

The patch below does not apply to the 6.7-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.7.y
git checkout FETCH_HEAD
git cherry-pick -x 31ee4ad86afd6ed6f4bb1b38c43011216080c42a
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2024021916-striking-evoke-4847@gregkh' --subject-prefix 'PATCH 6.7.y' HEAD^..

Possible dependencies:

31ee4ad86afd ("selftests: mptcp: join: stop transfer when check is done (part 1)")
80775412882e ("selftests: mptcp: add chk_subflows_total helper")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 31ee4ad86afd6ed6f4bb1b38c43011216080c42a Mon Sep 17 00:00:00 2001
From: "Matthieu Baerts (NGI0)" <matttbe@kernel.org>
Date: Wed, 31 Jan 2024 22:49:53 +0100
Subject: [PATCH] selftests: mptcp: join: stop transfer when check is done
 (part 1)

Since the "Fixes" commit mentioned below, "userspace pm" subtests of
mptcp_join selftests introduced in v6.5 are launching the whole transfer
in the background, do the required checks, then wait for the end of
transfer.

There is no need to wait longer, especially because the checks at the
end of the transfer are ignored (which is fine). This saves quite a few
seconds in slow environments.

Note that old versions will need commit bdbef0a6ff10 ("selftests: mptcp:
add mptcp_lib_kill_wait") as well to get 'mptcp_lib_kill_wait()' helper.

Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org # 6.5.x: bdbef0a6ff10: selftests: mptcp: add mptcp_lib_kill_wait
Cc: stable@vger.kernel.org # 6.5.x
Reviewed-and-tested-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-8-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 3a5b63026191..85bcc95f4ede 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -3453,7 +3453,7 @@ userspace_tests()
 		chk_mptcp_info subflows 0 subflows 0
 		chk_subflows_total 1 1
 		kill_events_pids
-		wait $tests_pid
+		mptcp_lib_kill_wait $tests_pid
 	fi
 
 	# userspace pm create destroy subflow
@@ -3475,7 +3475,7 @@ userspace_tests()
 		chk_mptcp_info subflows 0 subflows 0
 		chk_subflows_total 1 1
 		kill_events_pids
-		wait $tests_pid
+		mptcp_lib_kill_wait $tests_pid
 	fi
 
 	# userspace pm create id 0 subflow

FAILED: patch "[PATCH] selftests: mptcp: join: stop transfer when check is done" failed to apply to 6.7-stable tree

[gregkh]

The patch below does not apply to the 6.7-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.7.y
git checkout FETCH_HEAD
git cherry-pick -x 04b57c9e096a9479fe0ad31e3956e336fa589cb2
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2024021925-saloon-pursuit-2736@gregkh' --subject-prefix 'PATCH 6.7.y' HEAD^..

Possible dependencies:

04b57c9e096a ("selftests: mptcp: join: stop transfer when check is done (part 2)")
b9fb176081fb ("selftests: mptcp: userspace pm send RM_ADDR for ID 0")
e3b47e460b4b ("selftests: mptcp: userspace pm remove initial subflow")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 04b57c9e096a9479fe0ad31e3956e336fa589cb2 Mon Sep 17 00:00:00 2001
From: "Matthieu Baerts (NGI0)" <matttbe@kernel.org>
Date: Wed, 31 Jan 2024 22:49:54 +0100
Subject: [PATCH] selftests: mptcp: join: stop transfer when check is done
 (part 2)

Since the "Fixes" commits mentioned below, the newly added "userspace
pm" subtests of mptcp_join selftests are launching the whole transfer in
the background, do the required checks, then wait for the end of
transfer.

There is no need to wait longer, especially because the checks at the
end of the transfer are ignored (which is fine). This saves quite a few
seconds on slow environments.

While at it, use 'mptcp_lib_kill_wait()' helper everywhere, instead of
on a specific one with 'kill_tests_wait()'.

Fixes: b2e2248f365a ("selftests: mptcp: userspace pm create id 0 subflow")
Fixes: e3b47e460b4b ("selftests: mptcp: userspace pm remove initial subflow")
Fixes: b9fb176081fb ("selftests: mptcp: userspace pm send RM_ADDR for ID 0")
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-9-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 85bcc95f4ede..c07386e21e0a 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -643,13 +643,6 @@ kill_events_pids()
 	mptcp_lib_kill_wait $evts_ns2_pid
 }
 
-kill_tests_wait()
-{
-	#shellcheck disable=SC2046
-	kill -SIGUSR1 $(ip netns pids $ns2) $(ip netns pids $ns1)
-	wait
-}
-
 pm_nl_set_limits()
 {
 	local ns=$1
@@ -3494,7 +3487,7 @@ userspace_tests()
 		chk_mptcp_info subflows 1 subflows 1
 		chk_subflows_total 2 2
 		kill_events_pids
-		wait $tests_pid
+		mptcp_lib_kill_wait $tests_pid
 	fi
 
 	# userspace pm remove initial subflow
@@ -3518,7 +3511,7 @@ userspace_tests()
 		chk_mptcp_info subflows 1 subflows 1
 		chk_subflows_total 1 1
 		kill_events_pids
-		wait $tests_pid
+		mptcp_lib_kill_wait $tests_pid
 	fi
 
 	# userspace pm send RM_ADDR for ID 0
@@ -3544,7 +3537,7 @@ userspace_tests()
 		chk_mptcp_info subflows 1 subflows 1
 		chk_subflows_total 1 1
 		kill_events_pids
-		wait $tests_pid
+		mptcp_lib_kill_wait $tests_pid
 	fi
 }
 
@@ -3558,7 +3551,8 @@ endpoint_tests()
 		pm_nl_set_limits $ns2 2 2
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
 		speed=slow \
-			run_tests $ns1 $ns2 10.0.1.1 2>/dev/null &
+			run_tests $ns1 $ns2 10.0.1.1 &
+		local tests_pid=$!
 
 		wait_mpj $ns1
 		pm_nl_check_endpoint "creation" \
@@ -3573,7 +3567,7 @@ endpoint_tests()
 		pm_nl_add_endpoint $ns2 10.0.2.2 flags signal
 		pm_nl_check_endpoint "modif is allowed" \
 			$ns2 10.0.2.2 id 1 flags signal
-		kill_tests_wait
+		mptcp_lib_kill_wait $tests_pid
 	fi
 
 	if reset "delete and re-add" &&
@@ -3582,7 +3576,8 @@ endpoint_tests()
 		pm_nl_set_limits $ns2 1 1
 		pm_nl_add_endpoint $ns2 10.0.2.2 id 2 dev ns2eth2 flags subflow
 		test_linkfail=4 speed=20 \
-			run_tests $ns1 $ns2 10.0.1.1 2>/dev/null &
+			run_tests $ns1 $ns2 10.0.1.1 &
+		local tests_pid=$!
 
 		wait_mpj $ns2
 		chk_subflow_nr "before delete" 2
@@ -3597,7 +3592,7 @@ endpoint_tests()
 		wait_mpj $ns2
 		chk_subflow_nr "after re-add" 2
 		chk_mptcp_info subflows 1 subflows 1
-		kill_tests_wait
+		mptcp_lib_kill_wait $tests_pid
 	fi
 }
 

[PATCH 6.7.y] selftests: mptcp: join: stop transfer when check is done (part 2)

[Matthieu Baerts (NGI0)]

Since the "Fixes" commits mentioned below, the newly added "userspace
pm" subtests of mptcp_join selftests are launching the whole transfer in
the background, do the required checks, then wait for the end of
transfer.

There is no need to wait longer, especially because the checks at the
end of the transfer are ignored (which is fine). This saves quite a few
seconds on slow environments.

While at it, use 'mptcp_lib_kill_wait()' helper everywhere, instead of
on a specific one with 'kill_tests_wait()'.

Fixes: b2e2248f365a ("selftests: mptcp: userspace pm create id 0 subflow")
Fixes: e3b47e460b4b ("selftests: mptcp: userspace pm remove initial subflow")
Fixes: b9fb176081fb ("selftests: mptcp: userspace pm send RM_ADDR for ID 0")
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-9-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
(cherry picked from commit 04b57c9e096a9479fe0ad31e3956e336fa589cb2)
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
---
Notes:
 - conflicts because modified "userspace pm" tests are not in v6.7.x
---
 tools/testing/selftests/net/mptcp/mptcp_join.sh | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 99674dafa698..2f28d594b2c5 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -688,13 +688,6 @@ kill_events_pids()
 	mptcp_lib_kill_wait $evts_ns2_pid
 }
 
-kill_tests_wait()
-{
-	#shellcheck disable=SC2046
-	kill -SIGUSR1 $(ip netns pids $ns2) $(ip netns pids $ns1)
-	wait
-}
-
 pm_nl_set_limits()
 {
 	local ns=$1
@@ -3466,7 +3459,8 @@ endpoint_tests()
 		pm_nl_set_limits $ns2 2 2
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
 		speed=slow \
-			run_tests $ns1 $ns2 10.0.1.1 2>/dev/null &
+			run_tests $ns1 $ns2 10.0.1.1 &
+		local tests_pid=$!
 
 		wait_mpj $ns1
 		pm_nl_check_endpoint "creation" \
@@ -3481,7 +3475,7 @@ endpoint_tests()
 		pm_nl_add_endpoint $ns2 10.0.2.2 flags signal
 		pm_nl_check_endpoint "modif is allowed" \
 			$ns2 10.0.2.2 id 1 flags signal
-		kill_tests_wait
+		mptcp_lib_kill_wait $tests_pid
 	fi
 
 	if reset "delete and re-add" &&
@@ -3490,7 +3484,8 @@ endpoint_tests()
 		pm_nl_set_limits $ns2 1 1
 		pm_nl_add_endpoint $ns2 10.0.2.2 id 2 dev ns2eth2 flags subflow
 		test_linkfail=4 speed=20 \
-			run_tests $ns1 $ns2 10.0.1.1 2>/dev/null &
+			run_tests $ns1 $ns2 10.0.1.1 &
+		local tests_pid=$!
 
 		wait_mpj $ns2
 		chk_subflow_nr "before delete" 2
@@ -3505,7 +3500,7 @@ endpoint_tests()
 		wait_mpj $ns2
 		chk_subflow_nr "after re-add" 2
 		chk_mptcp_info subflows 1 subflows 1
-		kill_tests_wait
+		mptcp_lib_kill_wait $tests_pid
 	fi
 }
 
-- 
2.43.0