[PATCH AUTOSEL 6.7 01/14] arm64: tegra: Set the correct PHY mode for MGBE

[PATCH AUTOSEL 6.7 01/14] arm64: tegra: Set the correct PHY mode for MGBE

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit 4c892121d43bc2b45896ca207b54f39a8fa6b852 ]

The PHY is configured in 10GBASE-R, so make sure to reflect that in DT.

Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index ea13c4a7027c4..81a82933e3500 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -175,7 +175,7 @@
 			status = "okay";
 
 			phy-handle = <&mgbe0_phy>;
-			phy-mode = "usxgmii";
+			phy-mode = "10gbase-r";
 
 			mdio {
 				#address-cells = <1>;
-- 
2.43.0

[PATCH AUTOSEL 6.7 02/14] ASoC: Intel: bytcr_rt5640: Add an extra entry for the Chuwi Vi8 tablet

[Sasha Levin]

From: Alban Boyé <alban.boye@protonmail.com>

[ Upstream commit f8b0127aca8c60826e7354e504a12d4a46b1c3bb ]

The bios version can differ depending if it is a dual-boot variant of the tablet.
Therefore another DMI match is required.

Signed-off-by: Alban Boyé <alban.boye@protonmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240228192807.15130-1-alban.boye@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 42466b4b1ca45..a290f498ba823 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -685,6 +685,18 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF1 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Chuwi Vi8 dual-boot (CWI506) */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Insyde"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "i86"),
+			/* The above are too generic, also match BIOS info */
+			DMI_MATCH(DMI_BIOS_VERSION, "CHUWI2.D86JHBNR02"),
+		},
+		.driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+					BYT_RT5640_MONO_SPEAKER |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{
 		/* Chuwi Vi10 (CWI505) */
 		.matches = {
-- 
2.43.0

[PATCH AUTOSEL 6.7 03/14] x86/hyperv: Use slow_virt_to_phys() in page transition hypervisor callback

[Sasha Levin]

From: Michael Kelley <mhklinux@outlook.com>

[ Upstream commit 9fef276f9f416a1e85eb48d3bd38e6018a220bf5 ]

In preparation for temporarily marking pages not present during a
transition between encrypted and decrypted, use slow_virt_to_phys()
in the hypervisor callback. As long as the PFN is correct,
slow_virt_to_phys() works even if the leaf PTE is not present.
The existing functions that depend on vmalloc_to_page() all
require that the leaf PTE be marked present, so they don't work.

Update the comments for slow_virt_to_phys() to note this broader usage
and the requirement to work even if the PTE is not marked present.

Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Link: https://lore.kernel.org/r/20240116022008.1023398-2-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240116022008.1023398-2-mhklinux@outlook.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/hyperv/ivm.c        | 12 +++++++++++-
 arch/x86/mm/pat/set_memory.c | 12 ++++++++----
 2 files changed, 19 insertions(+), 5 deletions(-)

diff --git a/arch/x86/hyperv/ivm.c b/arch/x86/hyperv/ivm.c
index 02e55237d919a..851107c77f4db 100644
--- a/arch/x86/hyperv/ivm.c
+++ b/arch/x86/hyperv/ivm.c
@@ -515,6 +515,8 @@ static bool hv_vtom_set_host_visibility(unsigned long kbuffer, int pagecount, bo
 	enum hv_mem_host_visibility visibility = enc ?
 			VMBUS_PAGE_NOT_VISIBLE : VMBUS_PAGE_VISIBLE_READ_WRITE;
 	u64 *pfn_array;
+	phys_addr_t paddr;
+	void *vaddr;
 	int ret = 0;
 	bool result = true;
 	int i, pfn;
@@ -524,7 +526,15 @@ static bool hv_vtom_set_host_visibility(unsigned long kbuffer, int pagecount, bo
 		return false;
 
 	for (i = 0, pfn = 0; i < pagecount; i++) {
-		pfn_array[pfn] = virt_to_hvpfn((void *)kbuffer + i * HV_HYP_PAGE_SIZE);
+		/*
+		 * Use slow_virt_to_phys() because the PRESENT bit has been
+		 * temporarily cleared in the PTEs.  slow_virt_to_phys() works
+		 * without the PRESENT bit while virt_to_hvpfn() or similar
+		 * does not.
+		 */
+		vaddr = (void *)kbuffer + (i * HV_HYP_PAGE_SIZE);
+		paddr = slow_virt_to_phys(vaddr);
+		pfn_array[pfn] = paddr >> HV_HYP_PAGE_SHIFT;
 		pfn++;
 
 		if (pfn == HV_MAX_MODIFY_GPA_REP_COUNT || i == pagecount - 1) {
diff --git a/arch/x86/mm/pat/set_memory.c b/arch/x86/mm/pat/set_memory.c
index bda9f129835e9..355dc8f5cb7dd 100644
--- a/arch/x86/mm/pat/set_memory.c
+++ b/arch/x86/mm/pat/set_memory.c
@@ -755,10 +755,14 @@ pmd_t *lookup_pmd_address(unsigned long address)
  * areas on 32-bit NUMA systems.  The percpu areas can
  * end up in this kind of memory, for instance.
  *
- * This could be optimized, but it is only intended to be
- * used at initialization time, and keeping it
- * unoptimized should increase the testing coverage for
- * the more obscure platforms.
+ * Note that as long as the PTEs are well-formed with correct PFNs, this
+ * works without checking the PRESENT bit in the leaf PTE.  This is unlike
+ * the similar vmalloc_to_page() and derivatives.  Callers may depend on
+ * this behavior.
+ *
+ * This could be optimized, but it is only used in paths that are not perf
+ * sensitive, and keeping it unoptimized should increase the testing coverage
+ * for the more obscure platforms.
  */
 phys_addr_t slow_virt_to_phys(void *__virt_addr)
 {
-- 
2.43.0

[PATCH AUTOSEL 6.7 04/14] x86/hyperv: Allow 15-bit APIC IDs for VTL platforms

[Sasha Levin]

From: Saurabh Sengar <ssengar@linux.microsoft.com>

[ Upstream commit 0d63e4c0ebc2b5c329babde44fd61d3f08db814d ]

The current method for signaling the compatibility of a Hyper-V host
with MSIs featuring 15-bit APIC IDs relies on a synthetic cpuid leaf.
However, for higher VTLs, this leaf is not reported, due to the absence
of an IO-APIC.

As an alternative, assume that when running at a high VTL, the host
supports 15-bit APIC IDs. This assumption is safe, as Hyper-V does not
employ any architectural MSIs at higher VTLs

This unblocks startup of VTL2 environments with more than 256 CPUs.

Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1705341460-18394-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1705341460-18394-1-git-send-email-ssengar@linux.microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/hyperv/hv_vtl.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/x86/hyperv/hv_vtl.c b/arch/x86/hyperv/hv_vtl.c
index 96e6c51515f50..cf1b78cb2d043 100644
--- a/arch/x86/hyperv/hv_vtl.c
+++ b/arch/x86/hyperv/hv_vtl.c
@@ -16,6 +16,11 @@
 extern struct boot_params boot_params;
 static struct real_mode_header hv_vtl_real_mode_header;
 
+static bool __init hv_vtl_msi_ext_dest_id(void)
+{
+	return true;
+}
+
 void __init hv_vtl_init_platform(void)
 {
 	pr_info("Linux runs in Hyper-V Virtual Trust Level\n");
@@ -38,6 +43,8 @@ void __init hv_vtl_init_platform(void)
 	x86_platform.legacy.warm_reset = 0;
 	x86_platform.legacy.reserve_bios_regions = 0;
 	x86_platform.legacy.devices.pnpbios = 0;
+
+	x86_init.hyper.msi_ext_dest_id = hv_vtl_msi_ext_dest_id;
 }
 
 static inline u64 hv_vtl_system_desc_base(struct ldttss_desc *desc)
-- 
2.43.0

[PATCH AUTOSEL 6.7 05/14] arm64: dts: qcom: sc8280xp-crd: limit pcie4 link speed

[Sasha Levin]

From: Johan Hovold <johan+linaro@kernel.org>

[ Upstream commit db8138845cebcdd0c709570b8217bd052757b8df ]

Limit the WiFi PCIe link speed to Gen2 speed (500 MB/s), which is the
speed that Windows uses.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240223152124.20042-7-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index ffc4406422ae2..41215567b3aed 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -563,6 +563,8 @@
 };
 
 &pcie4 {
+	max-link-speed = <2>;
+
 	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
 
-- 
2.43.0

Re: [PATCH AUTOSEL 6.7 05/14] arm64: dts: qcom: sc8280xp-crd: limit pcie4 link speed

[Johan Hovold]

On Mon, Mar 11, 2024 at 02:36:08PM -0400, Sasha Levin wrote:
> From: Johan Hovold <johan+linaro@kernel.org>
> 
> [ Upstream commit db8138845cebcdd0c709570b8217bd052757b8df ]
> 
> Limit the WiFi PCIe link speed to Gen2 speed (500 MB/s), which is the
> speed that Windows uses.
> 
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Link: https://lore.kernel.org/r/20240223152124.20042-7-johan+linaro@kernel.org
> Signed-off-by: Bjorn Andersson <andersson@kernel.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

This one was not marked for stable and does not need to be backported.
Please drop from all queues.

Johan

Re: [PATCH AUTOSEL 6.7 05/14] arm64: dts: qcom: sc8280xp-crd: limit pcie4 link speed

[Sasha Levin]

On Tue, Mar 12, 2024 at 08:50:01AM +0100, Johan Hovold wrote:
>On Mon, Mar 11, 2024 at 02:36:08PM -0400, Sasha Levin wrote:
>> From: Johan Hovold <johan+linaro@kernel.org>
>>
>> [ Upstream commit db8138845cebcdd0c709570b8217bd052757b8df ]
>>
>> Limit the WiFi PCIe link speed to Gen2 speed (500 MB/s), which is the
>> speed that Windows uses.
>>
>> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
>> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
>> Link: https://lore.kernel.org/r/20240223152124.20042-7-johan+linaro@kernel.org
>> Signed-off-by: Bjorn Andersson <andersson@kernel.org>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>
>This one was not marked for stable and does not need to be backported.
>Please drop from all queues.

Ack.

-- 
Thanks,
Sasha

[PATCH AUTOSEL 6.7 06/14] ALSA: hda/realtek: Add quirks for Lenovo Thinkbook 16P laptops

[Sasha Levin]

From: Stefan Binding <sbinding@opensource.cirrus.com>

[ Upstream commit 6214e24cae9b10a7c1572f99552610a24614fffe ]

These models use 2 CS35L41 amps with HDA using I2C.
Both models have _DSD support inside cs35l41_hda_property.c.

Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218437

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240301160154.158398-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index eb45e5c3db8c6..9590fd31441bc 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -10288,6 +10288,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x17aa, 0x3886, "Y780 VECO DUAL", ALC287_FIXUP_TAS2781_I2C),
 	SND_PCI_QUIRK(0x17aa, 0x38a7, "Y780P AMD YG dual", ALC287_FIXUP_TAS2781_I2C),
 	SND_PCI_QUIRK(0x17aa, 0x38a8, "Y780P AMD VECO dual", ALC287_FIXUP_TAS2781_I2C),
+	SND_PCI_QUIRK(0x17aa, 0x38a9, "Thinkbook 16P", ALC287_FIXUP_CS35L41_I2C_2),
+	SND_PCI_QUIRK(0x17aa, 0x38ab, "Thinkbook 16P", ALC287_FIXUP_CS35L41_I2C_2),
 	SND_PCI_QUIRK(0x17aa, 0x38b4, "Legion Slim 7 16IRH8", ALC287_FIXUP_CS35L41_I2C_2),
 	SND_PCI_QUIRK(0x17aa, 0x38b5, "Legion Slim 7 16IRH8", ALC287_FIXUP_CS35L41_I2C_2),
 	SND_PCI_QUIRK(0x17aa, 0x38b6, "Legion Slim 7 16APH8", ALC287_FIXUP_CS35L41_I2C_2),
-- 
2.43.0

[PATCH AUTOSEL 6.7 07/14] ALSA: hda: cs35l41: Overwrite CS35L41 configuration for ASUS UM5302LA

[Sasha Levin]

From: Stefan Binding <sbinding@opensource.cirrus.com>

[ Upstream commit b603d95692e47dc6f5f733e93c3841dc0c01e624 ]

Whilst this laptop contains _DSD inside the BIOS, there is an error in
this configuration. Override the _DSD in the BIOS with the correct
configuration for this laptop.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240301160154.158398-4-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/cs35l41_hda_property.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/pci/hda/cs35l41_hda_property.c b/sound/pci/hda/cs35l41_hda_property.c
index d74cf11eef1ea..2de06e3db1a9e 100644
--- a/sound/pci/hda/cs35l41_hda_property.c
+++ b/sound/pci/hda/cs35l41_hda_property.c
@@ -83,6 +83,7 @@ static const struct cs35l41_config cs35l41_config_table[] = {
 	{ "104317F3", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
 	{ "10431863", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
 	{ "104318D3", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 0, 0, 0 },
+	{ "10431A83", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
 	{ "10431C9F", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
 	{ "10431CAF", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
 	{ "10431CCF", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
@@ -419,6 +420,7 @@ static const struct cs35l41_prop_model cs35l41_prop_model_table[] = {
 	{ "CSC3551", "104317F3", generic_dsd_config },
 	{ "CSC3551", "10431863", generic_dsd_config },
 	{ "CSC3551", "104318D3", generic_dsd_config },
+	{ "CSC3551", "10431A83", generic_dsd_config },
 	{ "CSC3551", "10431C9F", generic_dsd_config },
 	{ "CSC3551", "10431CAF", generic_dsd_config },
 	{ "CSC3551", "10431CCF", generic_dsd_config },
-- 
2.43.0

[PATCH AUTOSEL 6.7 08/14] ASoC: amd: yc: Add HP Pavilion Aero Laptop 13-be2xxx(8BD6) into DMI quirk table

[Sasha Levin]

From: Al Raj Hassain <alrajhassain@gmail.com>

[ Upstream commit b3a51137607cee7c814cd3a75d96f78b9ee1dc1f ]

The HP Pavilion Aero Laptop 13-be2xxx(8BD6) requires a quirk entry for its internal microphone to function.

Signed-off-by: Al Raj Hassain <alrajhassain@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://msgid.link/r/20240304103924.13673-1-alrajhassain@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/amd/yc/acp6x-mach.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c
index 80ad60d485ea0..ea9512efa6fa5 100644
--- a/sound/soc/amd/yc/acp6x-mach.c
+++ b/sound/soc/amd/yc/acp6x-mach.c
@@ -395,6 +395,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "8B2F"),
 		}
 	},
+	{
+		.driver_data = &acp6x_card,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "HP"),
+			DMI_MATCH(DMI_BOARD_NAME, "8BD6"),
+		}
+	},
 	{
 		.driver_data = &acp6x_card,
 		.matches = {
-- 
2.43.0

[PATCH AUTOSEL 6.7 09/14] xfrm: fix xfrm child route lookup for packet offload

[Sasha Levin]

From: Mike Yu <yumike@google.com>

[ Upstream commit d4872d70fc6feabfc8e897edad993a81096ade9f ]

In current code, xfrm_bundle_create() always uses the matched
SA's family type to look up a xfrm child route for the skb.
The route returned by xfrm_dst_lookup() will eventually be
used in xfrm_output_resume() (skb_dst(skb)->ops->local_out()).

If packet offload is used, the above behavior can lead to
calling ip_local_out() for an IPv6 packet or calling
ip6_local_out() for an IPv4 packet, which is likely to fail.

This change fixes the behavior by checking if the matched SA
has packet offload enabled. If not, keep the same behavior;
if yes, use the matched SP's family type for the lookup.

Test: verified IPv6-in-IPv4 packets on Android device with
      IPsec packet offload enabled
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_policy.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index c13dc3ef79107..3c666dee04fcf 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -2694,7 +2694,9 @@ static struct dst_entry *xfrm_bundle_create(struct xfrm_policy *policy,
 			if (xfrm[i]->props.smark.v || xfrm[i]->props.smark.m)
 				mark = xfrm_smark_get(fl->flowi_mark, xfrm[i]);
 
-			family = xfrm[i]->props.family;
+			if (xfrm[i]->xso.type != XFRM_DEV_OFFLOAD_PACKET)
+				family = xfrm[i]->props.family;
+
 			oif = fl->flowi_oif ? : fl->flowi_l3mdev;
 			dst = xfrm_dst_lookup(xfrm[i], tos, oif,
 					      &saddr, &daddr, family, mark);
-- 
2.43.0

[PATCH AUTOSEL 6.7 10/14] xfrm: set skb control buffer based on packet offload as well

[Sasha Levin]

From: Mike Yu <yumike@google.com>

[ Upstream commit 8688ab2170a5be0bc922195f7091c38b506bab2e ]

In packet offload, packets are not encrypted in XFRM stack, so
the next network layer which the packets will be forwarded to
should depend on where the packet came from (either xfrm4_output
or xfrm6_output) rather than the matched SA's family type.

Test: verified IPv6-in-IPv4 packets on Android device with
      IPsec packet offload enabled
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_output.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c
index 662c83beb345e..e5722c95b8bb3 100644
--- a/net/xfrm/xfrm_output.c
+++ b/net/xfrm/xfrm_output.c
@@ -704,9 +704,13 @@ int xfrm_output(struct sock *sk, struct sk_buff *skb)
 {
 	struct net *net = dev_net(skb_dst(skb)->dev);
 	struct xfrm_state *x = skb_dst(skb)->xfrm;
+	int family;
 	int err;
 
-	switch (x->outer_mode.family) {
+	family = (x->xso.type != XFRM_DEV_OFFLOAD_PACKET) ? x->outer_mode.family
+		: skb_dst(skb)->ops->family;
+
+	switch (family) {
 	case AF_INET:
 		memset(IPCB(skb), 0, sizeof(*IPCB(skb)));
 		IPCB(skb)->flags |= IPSKB_XFRM_TRANSFORMED;
-- 
2.43.0

[PATCH AUTOSEL 6.7 11/14] Input: gpio_keys_polled - suppress deferred probe error for gpio

[Sasha Levin]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit 963465a33141d0d52338e77f80fe543d2c9dc053 ]

On a PC Engines APU our admins are faced with:

	$ dmesg | grep -c "gpio-keys-polled gpio-keys-polled: unable to claim gpio 0, err=-517"
	261

Such a message always appears when e.g. a new USB device is plugged in.

Suppress this message which considerably clutters the kernel log for
EPROBE_DEFER (i.e. -517).

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240305101042.10953-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/keyboard/gpio_keys_polled.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
index ba00ecfbd343b..b41fd1240f431 100644
--- a/drivers/input/keyboard/gpio_keys_polled.c
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -315,12 +315,10 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
 
 			error = devm_gpio_request_one(dev, button->gpio,
 					flags, button->desc ? : DRV_NAME);
-			if (error) {
-				dev_err(dev,
-					"unable to claim gpio %u, err=%d\n",
-					button->gpio, error);
-				return error;
-			}
+			if (error)
+				return dev_err_probe(dev, error,
+						     "unable to claim gpio %u\n",
+						     button->gpio);
 
 			bdata->gpiod = gpio_to_desc(button->gpio);
 			if (!bdata->gpiod) {
-- 
2.43.0

[PATCH AUTOSEL 6.7 12/14] ASoC: wm8962: Enable oscillator if selecting WM8962_FLL_OSC

[Sasha Levin]

From: Stuart Henderson <stuarth@opensource.cirrus.com>

[ Upstream commit 03c7874106ca5032a312626b927b1c35f07b1f35 ]

Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Link: https://msgid.link/r/20240306161439.1385643-1-stuarth@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8962.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index fb90ae6a8a344..6d7bb696b1356 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2914,8 +2914,12 @@ static int wm8962_set_fll(struct snd_soc_component *component, int fll_id, int s
 	switch (fll_id) {
 	case WM8962_FLL_MCLK:
 	case WM8962_FLL_BCLK:
+		fll1 |= (fll_id - 1) << WM8962_FLL_REFCLK_SRC_SHIFT;
+		break;
 	case WM8962_FLL_OSC:
 		fll1 |= (fll_id - 1) << WM8962_FLL_REFCLK_SRC_SHIFT;
+		snd_soc_component_update_bits(component, WM8962_PLL2,
+					      WM8962_OSC_ENA, WM8962_OSC_ENA);
 		break;
 	case WM8962_FLL_INT:
 		snd_soc_component_update_bits(component, WM8962_FLL_CONTROL_1,
-- 
2.43.0

[PATCH AUTOSEL 6.7 13/14] ASoC: wm8962: Enable both SPKOUTR_ENA and SPKOUTL_ENA in mono mode

[Sasha Levin]

From: Stuart Henderson <stuarth@opensource.cirrus.com>

[ Upstream commit 6fa849e4d78b880e878138bf238e4fd2bac3c4fa ]

Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Link: https://msgid.link/r/20240306161439.1385643-2-stuarth@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8962.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 6d7bb696b1356..2256cc0a37ebd 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2229,6 +2229,9 @@ SND_SOC_DAPM_PGA_E("HPOUT", SND_SOC_NOPM, 0, 0, NULL, 0, hp_event,
 
 SND_SOC_DAPM_OUTPUT("HPOUTL"),
 SND_SOC_DAPM_OUTPUT("HPOUTR"),
+
+SND_SOC_DAPM_PGA("SPKOUTL Output", WM8962_CLASS_D_CONTROL_1, 6, 0, NULL, 0),
+SND_SOC_DAPM_PGA("SPKOUTR Output", WM8962_CLASS_D_CONTROL_1, 7, 0, NULL, 0),
 };
 
 static const struct snd_soc_dapm_widget wm8962_dapm_spk_mono_widgets[] = {
@@ -2236,7 +2239,6 @@ SND_SOC_DAPM_MIXER("Speaker Mixer", WM8962_MIXER_ENABLES, 1, 0,
 		   spkmixl, ARRAY_SIZE(spkmixl)),
 SND_SOC_DAPM_MUX_E("Speaker PGA", WM8962_PWR_MGMT_2, 4, 0, &spkoutl_mux,
 		   out_pga_event, SND_SOC_DAPM_POST_PMU),
-SND_SOC_DAPM_PGA("Speaker Output", WM8962_CLASS_D_CONTROL_1, 7, 0, NULL, 0),
 SND_SOC_DAPM_OUTPUT("SPKOUT"),
 };
 
@@ -2251,9 +2253,6 @@ SND_SOC_DAPM_MUX_E("SPKOUTL PGA", WM8962_PWR_MGMT_2, 4, 0, &spkoutl_mux,
 SND_SOC_DAPM_MUX_E("SPKOUTR PGA", WM8962_PWR_MGMT_2, 3, 0, &spkoutr_mux,
 		   out_pga_event, SND_SOC_DAPM_POST_PMU),
 
-SND_SOC_DAPM_PGA("SPKOUTR Output", WM8962_CLASS_D_CONTROL_1, 7, 0, NULL, 0),
-SND_SOC_DAPM_PGA("SPKOUTL Output", WM8962_CLASS_D_CONTROL_1, 6, 0, NULL, 0),
-
 SND_SOC_DAPM_OUTPUT("SPKOUTL"),
 SND_SOC_DAPM_OUTPUT("SPKOUTR"),
 };
@@ -2366,12 +2365,18 @@ static const struct snd_soc_dapm_route wm8962_spk_mono_intercon[] = {
 	{ "Speaker PGA", "Mixer", "Speaker Mixer" },
 	{ "Speaker PGA", "DAC", "DACL" },
 
-	{ "Speaker Output", NULL, "Speaker PGA" },
-	{ "Speaker Output", NULL, "SYSCLK" },
-	{ "Speaker Output", NULL, "TOCLK" },
-	{ "Speaker Output", NULL, "TEMP_SPK" },
+	{ "SPKOUTL Output", NULL, "Speaker PGA" },
+	{ "SPKOUTL Output", NULL, "SYSCLK" },
+	{ "SPKOUTL Output", NULL, "TOCLK" },
+	{ "SPKOUTL Output", NULL, "TEMP_SPK" },
+
+	{ "SPKOUTR Output", NULL, "Speaker PGA" },
+	{ "SPKOUTR Output", NULL, "SYSCLK" },
+	{ "SPKOUTR Output", NULL, "TOCLK" },
+	{ "SPKOUTR Output", NULL, "TEMP_SPK" },
 
-	{ "SPKOUT", NULL, "Speaker Output" },
+	{ "SPKOUT", NULL, "SPKOUTL Output" },
+	{ "SPKOUT", NULL, "SPKOUTR Output" },
 };
 
 static const struct snd_soc_dapm_route wm8962_spk_stereo_intercon[] = {
-- 
2.43.0

[PATCH AUTOSEL 6.7 14/14] ASoC: wm8962: Fix up incorrect error message in wm8962_set_fll

[Sasha Levin]

From: Stuart Henderson <stuarth@opensource.cirrus.com>

[ Upstream commit 96e202f8c52ac49452f83317cf3b34cd1ad81e18 ]

Use source instead of ret, which seems to be unrelated and will always
be zero.

Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Link: https://msgid.link/r/20240306161439.1385643-5-stuarth@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8962.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 2256cc0a37ebd..7c6ed29831285 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2933,7 +2933,7 @@ static int wm8962_set_fll(struct snd_soc_component *component, int fll_id, int s
 				    WM8962_FLL_FRC_NCO, WM8962_FLL_FRC_NCO);
 		break;
 	default:
-		dev_err(component->dev, "Unknown FLL source %d\n", ret);
+		dev_err(component->dev, "Unknown FLL source %d\n", source);
 		return -EINVAL;
 	}
 
-- 
2.43.0