* FAILED: patch "[PATCH] usb: dwc3: core: Workaround for CSR read timeout" failed to apply to 5.10-stable tree
@ 2024-07-01 14:02 gregkh
0 siblings, 0 replies; only message in thread
From: gregkh @ 2024-07-01 14:02 UTC (permalink / raw)
To: joswang, Thinh.Nguyen, gregkh, stable; +Cc: stable
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x fc1d1a712b517bbcb383b1f1f7ef478e7d0579f2
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2024070116-finalize-precise-1679@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
fc1d1a712b51 ("usb: dwc3: core: Workaround for CSR read timeout")
f56d0d29b018 ("USB: dwc3: drop dead hibernation code")
3497b9a5c8c3 ("usb: dwc3: add power down scale setting")
0c0a20f6da04 ("usb: dwc3: Simplify with dev_err_probe()")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From fc1d1a712b517bbcb383b1f1f7ef478e7d0579f2 Mon Sep 17 00:00:00 2001
From: Jos Wang <joswang@lenovo.com>
Date: Wed, 19 Jun 2024 19:45:29 +0800
Subject: [PATCH] usb: dwc3: core: Workaround for CSR read timeout
This is a workaround for STAR 4846132, which only affects
DWC_usb31 version2.00a operating in host mode.
There is a problem in DWC_usb31 version 2.00a operating
in host mode that would cause a CSR read timeout When CSR
read coincides with RAM Clock Gating Entry. By disable
Clock Gating, sacrificing power consumption for normal
operation.
Cc: stable <stable@kernel.org> # 5.10.x: 1e43c86d: usb: dwc3: core: Add DWC31 version 2.00a controller
Signed-off-by: Jos Wang <joswang@lenovo.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240619114529.3441-1-joswang1221@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 9d47c3aa5777..cb82557678dd 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -957,12 +957,16 @@ static bool dwc3_core_is_valid(struct dwc3 *dwc)
static void dwc3_core_setup_global_control(struct dwc3 *dwc)
{
+ unsigned int power_opt;
+ unsigned int hw_mode;
u32 reg;
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
+ hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+ power_opt = DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1);
- switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) {
+ switch (power_opt) {
case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
/**
* WORKAROUND: DWC3 revisions between 2.10a and 2.50a have an
@@ -995,6 +999,20 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc)
break;
}
+ /*
+ * This is a workaround for STAR#4846132, which only affects
+ * DWC_usb31 version2.00a operating in host mode.
+ *
+ * There is a problem in DWC_usb31 version 2.00a operating
+ * in host mode that would cause a CSR read timeout When CSR
+ * read coincides with RAM Clock Gating Entry. By disable
+ * Clock Gating, sacrificing power consumption for normal
+ * operation.
+ */
+ if (power_opt != DWC3_GHWPARAMS1_EN_PWROPT_NO &&
+ hw_mode != DWC3_GHWPARAMS0_MODE_GADGET && DWC3_VER_IS(DWC31, 200A))
+ reg |= DWC3_GCTL_DSBLCLKGTNG;
+
/* check if current dwc3 is on simulation board */
if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) {
dev_info(dwc->dev, "Running with FPGA optimizations\n");
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2024-07-01 14:02 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-07-01 14:02 FAILED: patch "[PATCH] usb: dwc3: core: Workaround for CSR read timeout" failed to apply to 5.10-stable tree gregkh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox