* FAILED: patch "[PATCH] Bluetooth: btusb: Add Realtek RTL8852BE support ID" failed to apply to 6.10-stable tree
@ 2024-07-25 12:39 gregkh
0 siblings, 0 replies; only message in thread
From: gregkh @ 2024-07-25 12:39 UTC (permalink / raw)
To: wangyuli, guanwentao, luiz.von.dentz; +Cc: stable
The patch below does not apply to the 6.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.10.y
git checkout FETCH_HEAD
git cherry-pick -x 473a89b4ed7fd52a419340f7c540d5c8fc96fc75
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2024072503-karma-crewman-5be4@gregkh' --subject-prefix 'PATCH 6.10.y' HEAD^..
Possible dependencies:
473a89b4ed7f ("Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x13d3:0x3591")
295ef07a9dae ("Bluetooth: btusb: Add RTL8852BE device 0489:e125 to device tables")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 473a89b4ed7fd52a419340f7c540d5c8fc96fc75 Mon Sep 17 00:00:00 2001
From: WangYuli <wangyuli@uniontech.com>
Date: Sat, 22 Jun 2024 12:09:59 +0800
Subject: [PATCH] Bluetooth: btusb: Add Realtek RTL8852BE support ID
0x13d3:0x3591
Add the support ID(0x13d3, 0x3591) to usb_device_id table for
Realtek RTL8852BE.
The device table is as follows:
T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3591 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 2d7d47f9d007..2d5c971a59ad 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -555,6 +555,8 @@ static const struct usb_device_id quirks_table[] = {
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3572), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x13d3, 0x3591), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x0489, 0xe125), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2024-07-25 12:39 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-07-25 12:39 FAILED: patch "[PATCH] Bluetooth: btusb: Add Realtek RTL8852BE support ID" failed to apply to 6.10-stable tree gregkh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox