FAILED: patch "[PATCH] i2c: tegra: Do not mark ACPI devices as irq safe" failed to apply to 6.1-stable tree

FAILED: patch "[PATCH] i2c: tegra: Do not mark ACPI devices as irq safe" failed to apply to 6.1-stable tree

[gregkh]

The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 14d069d92951a3e150c0a81f2ca3b93e54da913b
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2024081950-amaze-wriggle-3057@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..

Possible dependencies:

14d069d92951 ("i2c: tegra: Do not mark ACPI devices as irq safe")
4f5d68c85914 ("i2c: tegra: allow VI support to be compiled out")
a55efa7edf37 ("i2c: tegra: allow DVC support to be compiled out")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 14d069d92951a3e150c0a81f2ca3b93e54da913b Mon Sep 17 00:00:00 2001
From: Breno Leitao <leitao@debian.org>
Date: Tue, 13 Aug 2024 09:12:53 -0700
Subject: [PATCH] i2c: tegra: Do not mark ACPI devices as irq safe

On ACPI machines, the tegra i2c module encounters an issue due to a
mutex being called inside a spinlock. This leads to the following bug:

	BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585
	...

	Call trace:
	__might_sleep
	__mutex_lock_common
	mutex_lock_nested
	acpi_subsys_runtime_resume
	rpm_resume
	tegra_i2c_xfer

The problem arises because during __pm_runtime_resume(), the spinlock
&dev->power.lock is acquired before rpm_resume() is called. Later,
rpm_resume() invokes acpi_subsys_runtime_resume(), which relies on
mutexes, triggering the error.

To address this issue, devices on ACPI are now marked as not IRQ-safe,
considering the dependency of acpi_subsys_runtime_resume() on mutexes.

Fixes: bd2fdedbf2ba ("i2c: tegra: Add the ACPI support")
Cc: <stable@vger.kernel.org> # v5.17+
Co-developed-by: Michael van der Westhuizen <rmikey@meta.com>
Signed-off-by: Michael van der Westhuizen <rmikey@meta.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 85b31edc558d..1df5b4204142 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -1802,9 +1802,9 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	 * domain.
 	 *
 	 * VI I2C device shouldn't be marked as IRQ-safe because VI I2C won't
-	 * be used for atomic transfers.
+	 * be used for atomic transfers. ACPI device is not IRQ safe also.
 	 */
-	if (!IS_VI(i2c_dev))
+	if (!IS_VI(i2c_dev) && !has_acpi_companion(i2c_dev->dev))
 		pm_runtime_irq_safe(i2c_dev->dev);
 
 	pm_runtime_enable(i2c_dev->dev);

Re: FAILED: patch "[PATCH] i2c: tegra: Do not mark ACPI devices as irq safe" failed to apply to 6.1-stable tree

[Breno Leitao]

Hello Greg,

On Mon, Aug 19, 2024 at 11:31:50AM +0200, gregkh@linuxfoundation.org wrote:
> 
> The patch below does not apply to the 6.1-stable tree.
> If someone wants it applied there, or to any other stable or longterm
> tree, then please email the backport, including the original git commit
> id to <stable@vger.kernel.org>.

I am working to backport this fix to 6.1 and I should have a patch ready
soon.

Thanks

[PATCH 6.1.y] i2c: tegra: Do not mark ACPI devices as irq safe

[Breno Leitao]

On ACPI machines, the tegra i2c module encounters an issue due to a
mutex being called inside a spinlock. This leads to the following bug:

	BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585
	...

	Call trace:
	__might_sleep
	__mutex_lock_common
	mutex_lock_nested
	acpi_subsys_runtime_resume
	rpm_resume
	tegra_i2c_xfer

The problem arises because during __pm_runtime_resume(), the spinlock
&dev->power.lock is acquired before rpm_resume() is called. Later,
rpm_resume() invokes acpi_subsys_runtime_resume(), which relies on
mutexes, triggering the error.

To address this issue, devices on ACPI are now marked as not IRQ-safe,
considering the dependency of acpi_subsys_runtime_resume() on mutexes.

Fixes: bd2fdedbf2ba ("i2c: tegra: Add the ACPI support")
Cc: <stable@vger.kernel.org> # v5.17+
Co-developed-by: Michael van der Westhuizen <rmikey@meta.com>
Signed-off-by: Michael van der Westhuizen <rmikey@meta.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
(cherry picked from commit 14d069d92951a3e150c0a81f2ca3b93e54da913b)
---
 drivers/i2c/busses/i2c-tegra.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index aa469b33ee2ee..86d3689152457 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -1823,9 +1823,9 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	 * domain.
 	 *
 	 * VI I2C device shouldn't be marked as IRQ-safe because VI I2C won't
-	 * be used for atomic transfers.
+	 * be used for atomic transfers. ACPI device is not IRQ safe also.
 	 */
-	if (!i2c_dev->is_vi)
+	if (!i2c_dev->is_vi && !has_acpi_companion(i2c_dev->dev))
 		pm_runtime_irq_safe(i2c_dev->dev);
 
 	pm_runtime_enable(i2c_dev->dev);
-- 
2.43.5