FAILED: patch "[PATCH] serial: 8250_fintek: Add support for F81216E" failed to apply to 5.10-stable tree

FAILED: patch "[PATCH] serial: 8250_fintek: Add support for F81216E" failed to apply to 5.10-stable tree

[gregkh]

The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 166105c9030a30ba08574a9998afc7b60bc72dd7
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2024120304-postnasal-shoptalk-c764@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 166105c9030a30ba08574a9998afc7b60bc72dd7 Mon Sep 17 00:00:00 2001
From: Filip Brozovic <fbrozovic@gmail.com>
Date: Sun, 10 Nov 2024 12:17:00 +0100
Subject: [PATCH] serial: 8250_fintek: Add support for F81216E

The F81216E is a LPC/eSPI to 4 UART Super I/O and is mostly compatible with
the F81216H, but does not support RS-485 auto-direction delays on any port.

Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20241110111703.15494-1-fbrozovic@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index f59c01f48480..b4461a89b8d0 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -21,6 +21,7 @@
 #define CHIP_ID_F81866 0x1010
 #define CHIP_ID_F81966 0x0215
 #define CHIP_ID_F81216AD 0x1602
+#define CHIP_ID_F81216E 0x1617
 #define CHIP_ID_F81216H 0x0501
 #define CHIP_ID_F81216 0x0802
 #define VENDOR_ID1 0x23
@@ -158,6 +159,7 @@ static int fintek_8250_check_id(struct fintek_8250 *pdata)
 	case CHIP_ID_F81866:
 	case CHIP_ID_F81966:
 	case CHIP_ID_F81216AD:
+	case CHIP_ID_F81216E:
 	case CHIP_ID_F81216H:
 	case CHIP_ID_F81216:
 		break;
@@ -181,6 +183,7 @@ static int fintek_8250_get_ldn_range(struct fintek_8250 *pdata, int *min,
 		return 0;
 
 	case CHIP_ID_F81216AD:
+	case CHIP_ID_F81216E:
 	case CHIP_ID_F81216H:
 	case CHIP_ID_F81216:
 		*min = F81216_LDN_LOW;
@@ -250,6 +253,7 @@ static void fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool is_level)
 		break;
 
 	case CHIP_ID_F81216AD:
+	case CHIP_ID_F81216E:
 	case CHIP_ID_F81216H:
 	case CHIP_ID_F81216:
 		sio_write_mask_reg(pdata, FINTEK_IRQ_MODE, IRQ_SHARE,
@@ -263,7 +267,8 @@ static void fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool is_level)
 static void fintek_8250_set_max_fifo(struct fintek_8250 *pdata)
 {
 	switch (pdata->pid) {
-	case CHIP_ID_F81216H: /* 128Bytes FIFO */
+	case CHIP_ID_F81216E: /* 128Bytes FIFO */
+	case CHIP_ID_F81216H:
 	case CHIP_ID_F81966:
 	case CHIP_ID_F81866:
 		sio_write_mask_reg(pdata, FIFO_CTRL,
@@ -297,6 +302,7 @@ static void fintek_8250_set_termios(struct uart_port *port,
 		goto exit;
 
 	switch (pdata->pid) {
+	case CHIP_ID_F81216E:
 	case CHIP_ID_F81216H:
 		reg = RS485;
 		break;
@@ -346,6 +352,7 @@ static void fintek_8250_set_termios_handler(struct uart_8250_port *uart)
 	struct fintek_8250 *pdata = uart->port.private_data;
 
 	switch (pdata->pid) {
+	case CHIP_ID_F81216E:
 	case CHIP_ID_F81216H:
 	case CHIP_ID_F81966:
 	case CHIP_ID_F81866:
@@ -438,6 +445,11 @@ static void fintek_8250_set_rs485_handler(struct uart_8250_port *uart)
 			uart->port.rs485_supported = fintek_8250_rs485_supported;
 		break;
 
+	case CHIP_ID_F81216E: /* F81216E does not support RS485 delays */
+		uart->port.rs485_config = fintek_8250_rs485_config;
+		uart->port.rs485_supported = fintek_8250_rs485_supported;
+		break;
+
 	default: /* No RS485 Auto direction functional */
 		break;
 	}