[PATCH] iio: adis16201: Correct inclinometer channel resolution

[PATCH] iio: adis16201: Correct inclinometer channel resolution

[Gabriel Shahrouzi]

The inclinometer channels were previously defined with 14 realbits.
However, the ADIS16201 datasheet states the resolution for these output
channels is 12 bits (Page 14, text description; Page 15, table 7).

Correct the realbits value to 12 to accurately reflect the hardware.

Fixes: f7fe1d1dd5a5 ("staging: iio: new adis16201 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
---
 drivers/iio/accel/adis16201.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/accel/adis16201.c b/drivers/iio/accel/adis16201.c
index 982b33f6eccac..dcc8d9f2ee0f1 100644
--- a/drivers/iio/accel/adis16201.c
+++ b/drivers/iio/accel/adis16201.c
@@ -211,9 +211,9 @@ static const struct iio_chan_spec adis16201_channels[] = {
 			BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
 	ADIS_AUX_ADC_CHAN(ADIS16201_AUX_ADC_REG, ADIS16201_SCAN_AUX_ADC, 0, 12),
 	ADIS_INCLI_CHAN(X, ADIS16201_XINCL_OUT_REG, ADIS16201_SCAN_INCLI_X,
-			BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
+			BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 12),
 	ADIS_INCLI_CHAN(Y, ADIS16201_YINCL_OUT_REG, ADIS16201_SCAN_INCLI_Y,
-			BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
+			BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 12),
 	IIO_CHAN_SOFT_TIMESTAMP(7)
 };
 
-- 
2.43.0

Re: [PATCH] iio: adis16201: Correct inclinometer channel resolution

[Marcelo Schmitt]

On 04/21, Gabriel Shahrouzi wrote:
> The inclinometer channels were previously defined with 14 realbits.
> However, the ADIS16201 datasheet states the resolution for these output
> channels is 12 bits (Page 14, text description; Page 15, table 7).
> 
> Correct the realbits value to 12 to accurately reflect the hardware.
> 
> Fixes: f7fe1d1dd5a5 ("staging: iio: new adis16201 driver")
> Cc: stable@vger.kernel.org
> Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>

Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>

Re: [PATCH] iio: adis16201: Correct inclinometer channel resolution

[Gabriel Shahrouzi]

On Mon, Apr 21, 2025 at 9:48 AM Marcelo Schmitt
<marcelo.schmitt1@gmail.com> wrote:
>
> On 04/21, Gabriel Shahrouzi wrote:
> > The inclinometer channels were previously defined with 14 realbits.
> > However, the ADIS16201 datasheet states the resolution for these output
> > channels is 12 bits (Page 14, text description; Page 15, table 7).
> >
> > Correct the realbits value to 12 to accurately reflect the hardware.
> >
> > Fixes: f7fe1d1dd5a5 ("staging: iio: new adis16201 driver")
> > Cc: stable@vger.kernel.org
> > Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
>
> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Should I have included the reviewed-by tag on the latest patch sent in
this thread since there were no changes to the code?

Re: [PATCH] iio: adis16201: Correct inclinometer channel resolution

[Marcelo Schmitt]

On 04/21, Gabriel Shahrouzi wrote:
> On Mon, Apr 21, 2025 at 9:48 AM Marcelo Schmitt
> <marcelo.schmitt1@gmail.com> wrote:
> >
> > On 04/21, Gabriel Shahrouzi wrote:
> > > The inclinometer channels were previously defined with 14 realbits.
> > > However, the ADIS16201 datasheet states the resolution for these output
> > > channels is 12 bits (Page 14, text description; Page 15, table 7).
> > >
> > > Correct the realbits value to 12 to accurately reflect the hardware.
> > >
> > > Fixes: f7fe1d1dd5a5 ("staging: iio: new adis16201 driver")
> > > Cc: stable@vger.kernel.org
> > > Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
> >
> > Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
> Should I have included the reviewed-by tag on the latest patch sent in
> this thread since there were no changes to the code?

Not sure I had given a review tag for this.
Hard to find the previous versrion because it doesn't seem to contain adis16201
in the subject name :/
Anyway, good thing the fix should be added to IIO now.

Regards,
Marcelo

Re: [PATCH] iio: adis16201: Correct inclinometer channel resolution

[Gabriel Shahrouzi]

On Mon, Apr 21, 2025 at 10:06 AM Marcelo Schmitt
<marcelo.schmitt1@gmail.com> wrote:
>
> On 04/21, Gabriel Shahrouzi wrote:
> > On Mon, Apr 21, 2025 at 9:48 AM Marcelo Schmitt
> > <marcelo.schmitt1@gmail.com> wrote:
> > >
> > > On 04/21, Gabriel Shahrouzi wrote:
> > > > The inclinometer channels were previously defined with 14 realbits.
> > > > However, the ADIS16201 datasheet states the resolution for these output
> > > > channels is 12 bits (Page 14, text description; Page 15, table 7).
> > > >
> > > > Correct the realbits value to 12 to accurately reflect the hardware.
> > > >
> > > > Fixes: f7fe1d1dd5a5 ("staging: iio: new adis16201 driver")
> > > > Cc: stable@vger.kernel.org
> > > > Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
> > >
> > > Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
> > Should I have included the reviewed-by tag on the latest patch sent in
> > this thread since there were no changes to the code?
>
> Not sure I had given a review tag for this.
Ah it's probably because I resent the patch in the same thread.
> Hard to find the previous versrion because it doesn't seem to contain adis16201
> in the subject name :/
> Anyway, good thing the fix should be added to IIO now.
>
> Regards,
> Marcelo

Re: [PATCH] iio: adis16201: Correct inclinometer channel resolution

[Jonathan Cameron]

On Mon, 21 Apr 2025 09:55:24 -0400
Gabriel Shahrouzi <gshahrouzi@gmail.com> wrote:

> On Mon, Apr 21, 2025 at 9:48 AM Marcelo Schmitt
> <marcelo.schmitt1@gmail.com> wrote:
> >
> > On 04/21, Gabriel Shahrouzi wrote:  
> > > The inclinometer channels were previously defined with 14 realbits.
> > > However, the ADIS16201 datasheet states the resolution for these output
> > > channels is 12 bits (Page 14, text description; Page 15, table 7).
> > >
> > > Correct the realbits value to 12 to accurately reflect the hardware.
> > >
> > > Fixes: f7fe1d1dd5a5 ("staging: iio: new adis16201 driver")
> > > Cc: stable@vger.kernel.org
> > > Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>  
> >
> > Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>  
> Should I have included the reviewed-by tag on the latest patch sent in
> this thread since there were no changes to the code?
> 

Yes, but that was all a mix up anyway so don't worry about it.
I have the tag anyway.

Jonathan

Re: [PATCH] iio: adis16201: Correct inclinometer channel resolution

[Jonathan Cameron]

On Mon, 21 Apr 2025 09:15:39 -0400
Gabriel Shahrouzi <gshahrouzi@gmail.com> wrote:

> The inclinometer channels were previously defined with 14 realbits.
> However, the ADIS16201 datasheet states the resolution for these output
> channels is 12 bits (Page 14, text description; Page 15, table 7).
> 
> Correct the realbits value to 12 to accurately reflect the hardware.
> 
> Fixes: f7fe1d1dd5a5 ("staging: iio: new adis16201 driver")
> Cc: stable@vger.kernel.org
> Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
If you post a new version, always add the version number.

Anyhow, I was just asking for the fixes tag, but this is fine.

Applied to the fixes-togreg branch of iio.git

Thanks,

Jonathan

> ---
>  drivers/iio/accel/adis16201.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iio/accel/adis16201.c b/drivers/iio/accel/adis16201.c
> index 982b33f6eccac..dcc8d9f2ee0f1 100644
> --- a/drivers/iio/accel/adis16201.c
> +++ b/drivers/iio/accel/adis16201.c
> @@ -211,9 +211,9 @@ static const struct iio_chan_spec adis16201_channels[] = {
>  			BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
>  	ADIS_AUX_ADC_CHAN(ADIS16201_AUX_ADC_REG, ADIS16201_SCAN_AUX_ADC, 0, 12),
>  	ADIS_INCLI_CHAN(X, ADIS16201_XINCL_OUT_REG, ADIS16201_SCAN_INCLI_X,
> -			BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
> +			BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 12),
>  	ADIS_INCLI_CHAN(Y, ADIS16201_YINCL_OUT_REG, ADIS16201_SCAN_INCLI_Y,
> -			BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
> +			BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 12),
>  	IIO_CHAN_SOFT_TIMESTAMP(7)
>  };
>  

Re: [PATCH] iio: adis16201: Correct inclinometer channel resolution

[Gabriel Shahrouzi]

On Mon, Apr 21, 2025 at 9:59 AM Jonathan Cameron <jic23@kernel.org> wrote:
>
> On Mon, 21 Apr 2025 09:15:39 -0400
> Gabriel Shahrouzi <gshahrouzi@gmail.com> wrote:
>
> > The inclinometer channels were previously defined with 14 realbits.
> > However, the ADIS16201 datasheet states the resolution for these output
> > channels is 12 bits (Page 14, text description; Page 15, table 7).
> >
> > Correct the realbits value to 12 to accurately reflect the hardware.
> >
> > Fixes: f7fe1d1dd5a5 ("staging: iio: new adis16201 driver")
> > Cc: stable@vger.kernel.org
> > Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
> If you post a new version, always add the version number.
>
> Anyhow, I was just asking for the fixes tag, but this is fine.
Ah, that makes sense - thanks for the clarification. I was debating
whether to just send the Fixes tag or resend the full patch, and
figured the full patch might make it easier to apply.
>
> Applied to the fixes-togreg branch of iio.git
>
> Thanks,
>
> Jonathan
>
> > ---
> >  drivers/iio/accel/adis16201.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/iio/accel/adis16201.c b/drivers/iio/accel/adis16201.c
> > index 982b33f6eccac..dcc8d9f2ee0f1 100644
> > --- a/drivers/iio/accel/adis16201.c
> > +++ b/drivers/iio/accel/adis16201.c
> > @@ -211,9 +211,9 @@ static const struct iio_chan_spec adis16201_channels[] = {
> >                       BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
> >       ADIS_AUX_ADC_CHAN(ADIS16201_AUX_ADC_REG, ADIS16201_SCAN_AUX_ADC, 0, 12),
> >       ADIS_INCLI_CHAN(X, ADIS16201_XINCL_OUT_REG, ADIS16201_SCAN_INCLI_X,
> > -                     BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
> > +                     BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 12),
> >       ADIS_INCLI_CHAN(Y, ADIS16201_YINCL_OUT_REG, ADIS16201_SCAN_INCLI_Y,
> > -                     BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
> > +                     BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 12),
> >       IIO_CHAN_SOFT_TIMESTAMP(7)
> >  };
> >
>