[PATCH AUTOSEL 6.14 010/108] Bluetooth: btusb: Add new VID/PID 13d3/3630 for MT7925

[Sasha Levin <sashal@kernel.org>]

From: Jiande Lu <jiande.lu@mediatek.com>

[ Upstream commit 5bd5c716f7ec3e25d8d3b8a7566e192a26f9c7ce ]

Add VID 13d3 & PID 3630 for MediaTek MT7925 USB Bluetooth chip.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=07 Lev=01 Prnt=01 Port=10 Cnt=02 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3630 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Signed-off-by: Jiande Lu <jiande.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---

**YES** This commit should be backported to stable kernel trees based on
the following analysis: ## Commit Analysis **Nature of the Change:**
This commit adds hardware support for a new MediaTek MT7925 Bluetooth
USB device with VID 13d3 and PID 3630. The change is a simple addition
of a single line to the USB device ID table in
`drivers/bluetooth/btusb.c`. **Code Changes:** The modification adds one
entry to the `quirks_table`: ```c { USB_DEVICE(0x13d3, 0x3630),
.driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, ``` **Backport
Suitability Assessment:** 1. **Fixes User-Affecting Issue:** YES - This
enables Bluetooth functionality for users with this specific hardware
variant, which would otherwise be non-functional. 2. **Small and
Contained:** YES - The change is minimal (2 lines) and only adds a
device ID entry without modifying any existing logic or behavior. 3.
**No Side Effects:** YES - Adding a device ID entry has no impact on
existing devices or functionality. It only extends support to new
hardware. 4. **No Architectural Changes:** YES - This is purely a device
identification addition with no changes to the driver's architecture or
core functionality. 5. **Non-Critical Subsystem Impact:** YES - While
Bluetooth is important, this change only affects one specific device
variant and cannot break existing functionality. 6. **Minimal Regression
Risk:** YES - Device ID additions have virtually no risk of causing
regressions since they only affect the newly supported device. **Pattern
Consistency:** This commit follows the exact same pattern as the
provided reference commits (all marked "Backport Status: YES"): -
Similar commit #1: Added VID 13d3/PID 3628 for MT7925 - Similar commit
#2: Added VID 13d3/PID 3602 for MT7925 - Similar commit #3: Added VID
0489/PID e124 for MT7925 - Similar commit #4: Added VID 0489/PID e111
for MT7925 All these similar commits were deemed suitable for
backporting, and this commit is functionally identical in scope and risk
profile. **Stable Tree Compliance:** This change perfectly aligns with
stable tree criteria: - Fixes important hardware compatibility issue -
Introduces no new features beyond device recognition - Contains no
architectural modifications - Has minimal regression risk - Is confined
to a single driver file - Enables existing, well-tested code paths for
new hardware The commit enables users with this specific MT7925
Bluetooth adapter to have functional Bluetooth support in stable
kernels, which is an important user-facing improvement with essentially
zero risk.

 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 61d5e0d165bcd..64f0f64a5459c 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -720,6 +720,8 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3628), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3630), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* Additional Realtek 8723AE Bluetooth devices */
 	{ USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
-- 
2.39.5