From: Sasha Levin <sashal@kernel.org>
To: patches@lists.linux.dev, stable@vger.kernel.org
Cc: Liwei Sun <sunliweis@126.com>,
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>,
Sasha Levin <sashal@kernel.org>,
marcel@holtmann.org, luiz.dentz@gmail.com,
linux-bluetooth@vger.kernel.org
Subject: [PATCH AUTOSEL 6.14 006/108] Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922
Date: Tue, 3 Jun 2025 20:53:49 -0400 [thread overview]
Message-ID: <20250604005531.4178547-6-sashal@kernel.org> (raw)
In-Reply-To: <20250604005531.4178547-1-sashal@kernel.org>
From: Liwei Sun <sunliweis@126.com>
[ Upstream commit 71d9d3522aec301e4a1c4eae4b5e0656fc4a7262 ]
A new variant of MT7922 wireless device has been identified.
The device introduces itself as MEDIATEK MT7922,
so treat it as MediaTek device.
With this patch, btusb driver works as expected:
[ 3.151162] Bluetooth: Core ver 2.22
[ 3.151185] Bluetooth: HCI device and connection manager initialized
[ 3.151189] Bluetooth: HCI socket layer initialized
[ 3.151191] Bluetooth: L2CAP socket layer initialized
[ 3.151194] Bluetooth: SCO socket layer initialized
[ 3.295718] Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20241106163512
[ 4.676634] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.676637] Bluetooth: BNEP filters: protocol multicast
[ 4.676640] Bluetooth: BNEP socket layer initialized
[ 5.560453] Bluetooth: hci0: Device setup in 2320660 usecs
[ 5.560457] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 5.619197] Bluetooth: hci0: AOSP extensions version v1.00
[ 5.619204] Bluetooth: hci0: AOSP quality report is supported
[ 5.619301] Bluetooth: MGMT ver 1.23
[ 6.741247] Bluetooth: RFCOMM TTY layer initialized
[ 6.741258] Bluetooth: RFCOMM socket layer initialized
[ 6.741261] Bluetooth: RFCOMM ver 1.11
lspci output:
04:00.0 Network controller: MEDIATEK Corp. MT7922 802.11ax PCI Express Wireless Network Adapter
USB information:
T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3584 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
Signed-off-by: Liwei Sun <sunliweis@126.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
**YES** This commit should be backported to stable kernel trees. ##
Analysis ### Commit Assessment: 1. **Bug Fix Nature**: This commit fixes
a user-facing issue where the MediaTek MT7922 Bluetooth device with
VID/PID 13d3:3584 was not recognized by the btusb driver. Without this
fix, users with this specific hardware variant would have non-functional
Bluetooth. 2. **Code Changes**: The change is minimal and extremely
safe: - Adds a single line: `{ USB_DEVICE(0x13d3, 0x3584), .driver_info
= BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }` - This is purely additive -
it only adds device recognition without modifying any existing
functionality - Uses existing, well-tested driver flags (`BTUSB_MEDIATEK
| BTUSB_WIDEBAND_SPEECH`) that are already used for other MT7922
variants 3. **Historical Pattern**: Based on the similar commits
provided and git history analysis: - All 4 similar commits (adding
MT7922/MT7925 VID/PIDs) were marked as "Backport Status: YES" - Multiple
similar MT7922 VID/PID additions have been backported to stable kernels
(confirmed by git tag analysis showing commits like bf809efdcc4d
appearing in v6.10.x stable releases) - The pattern shows these hardware
enablement patches are consistently considered appropriate for stable
backports 4. **Risk Assessment**: - **Minimal Risk**: Only affects
systems with this specific USB device (VID 13d3, PID 3584) - **No
Behavioral Changes**: Doesn't modify any existing code paths or
algorithms - **Self-Contained**: Single device ID addition with proven
driver flags - **No Side Effects**: Cannot impact other hardware or
break existing functionality 5. **User Impact**: - **Immediate
Benefit**: Users with this MT7922 variant get working Bluetooth
functionality - **Hardware Support**: Essential for device recognition
on newer hardware that might ship with this specific variant - **No
Downside**: Zero impact on users without this hardware 6. **Stable Tree
Criteria Compliance**: - ✅ Fixes important user-facing issue (non-
working Bluetooth hardware) - ✅ Small, contained change - ✅ No
architectural modifications - ✅ Uses existing, stable code paths - ✅
Follows established pattern of similar backported commits The commit is
a textbook example of a stable-appropriate hardware enablement fix -
minimal risk, clear user benefit, and consistent with established
backport patterns for MediaTek Bluetooth device additions.
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index b15f3ed767c53..61d5e0d165bcd 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -678,6 +678,8 @@ static const struct usb_device_id quirks_table[] = {
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3568), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x13d3, 0x3584), .driver_info = BTUSB_MEDIATEK |
+ BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3605), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3607), .driver_info = BTUSB_MEDIATEK |
--
2.39.5
next prev parent reply other threads:[~2025-06-04 0:55 UTC|newest]
Thread overview: 108+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-04 0:53 [PATCH AUTOSEL 6.14 001/108] net: macb: Check return value of dma_set_mask_and_coherent() Sasha Levin
2025-06-04 0:53 ` [PATCH AUTOSEL 6.14 002/108] net: lan743x: Modify the EEPROM and OTP size for PCI1xxxx devices Sasha Levin
2025-06-04 0:53 ` [PATCH AUTOSEL 6.14 003/108] tipc: use kfree_sensitive() for aead cleanup Sasha Levin
2025-06-04 0:53 ` [PATCH AUTOSEL 6.14 004/108] f2fs: use vmalloc instead of kvmalloc in .init_{,de}compress_ctx Sasha Levin
2025-06-04 0:53 ` [PATCH AUTOSEL 6.14 005/108] bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem() Sasha Levin
2025-06-04 0:53 ` Sasha Levin [this message]
2025-06-04 0:53 ` [PATCH AUTOSEL 6.14 007/108] i2c: designware: Invoke runtime suspend on quick slave re-registration Sasha Levin
2025-06-04 0:53 ` [PATCH AUTOSEL 6.14 008/108] wifi: mt76: mt7996: drop fragments with multicast or broadcast RA Sasha Levin
2025-06-04 0:53 ` [PATCH AUTOSEL 6.14 009/108] emulex/benet: correct command version selection in be_cmd_get_stats() Sasha Levin
2025-06-04 0:53 ` [PATCH AUTOSEL 6.14 010/108] Bluetooth: btusb: Add new VID/PID 13d3/3630 for MT7925 Sasha Levin
2025-06-04 0:53 ` [PATCH AUTOSEL 6.14 011/108] Bluetooth: btusb: Add RTL8851BE device 0x0bda:0xb850 Sasha Levin
2025-06-04 0:53 ` [PATCH AUTOSEL 6.14 012/108] Bluetooth: ISO: Fix not using SID from adv report Sasha Levin
2025-06-04 0:53 ` [PATCH AUTOSEL 6.14 013/108] Bluetooth: btmrvl_sdio: Fix wakeup source leaks on device unbind Sasha Levin
2025-06-04 0:53 ` [PATCH AUTOSEL 6.14 014/108] Bluetooth: btmtksdio: " Sasha Levin
2025-06-04 0:53 ` [PATCH AUTOSEL 6.14 015/108] wifi: mt76: mt76x2: Add support for LiteOn WN4516R,WN4519R Sasha Levin
2025-06-04 0:53 ` [PATCH AUTOSEL 6.14 016/108] wifi: mt76: mt7921: add 160 MHz AP for mt7922 device Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 017/108] wifi: mt76: mt7925: introduce thermal protection Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 018/108] wifi: mac80211: validate SCAN_FLAG_AP in scan request during MLO Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 019/108] sctp: Do not wake readers in __sctp_write_space() Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 020/108] libbpf/btf: Fix string handling to support multi-split BTF Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 021/108] cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 022/108] i2c: tegra: check msg length in SMBUS block read Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 023/108] i2c: npcm: Add clock toggle recovery Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 024/108] clk: qcom: gcc-x1e80100: Set FORCE MEM CORE for UFS clocks Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 025/108] clk: qcom: gcc: Set FORCE_MEM_CORE_ON for gcc_ufs_axi_clk for 8650/8750 Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 026/108] net: dlink: add synchronization for stats update Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 027/108] wifi: ath12k: fix macro definition HAL_RX_MSDU_PKT_LENGTH_GET Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 028/108] wifi: ath12k: fix a possible dead lock caused by ab->base_lock Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 029/108] wifi: ath11k: Fix QMI memory reuse logic Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 030/108] iommu/amd: Allow matching ACPI HID devices without matching UIDs Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 031/108] wifi: rtw89: leave idle mode when setting WEP encryption for AP mode Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 032/108] tcp: always seek for minimal rtt in tcp_rcv_rtt_update() Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 033/108] tcp: remove zero TCP TS samples for autotuning Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 034/108] tcp: fix initial tp->rcvq_space.space value for passive TS enabled flows Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 035/108] tcp: add receive queue awareness in tcp_rcv_space_adjust() Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 036/108] x86/sgx: Prevent attempts to reclaim poisoned pages Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 037/108] ipv4/route: Use this_cpu_inc() for stats on PREEMPT_RT Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 038/108] net: page_pool: Don't recycle into cache " Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 039/108] xfrm: validate assignment of maximal possible SEQ number Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 040/108] openvswitch: Stricter validation for the userspace action Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 041/108] net: atlantic: generate software timestamp just before the doorbell Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 042/108] pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name() Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 043/108] pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction() Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 044/108] bpf: Pass the same orig_call value to trampoline functions Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 045/108] net: stmmac: generate software timestamp just before the doorbell Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 046/108] pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction() Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 047/108] libbpf: Check bpf_map_skeleton link for NULL Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 048/108] pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get() Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 049/108] net/mlx5: HWS, fix counting of rules in the matcher Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 050/108] net: mlx4: add SOF_TIMESTAMPING_TX_SOFTWARE flag when getting ts info Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 051/108] net: vertexcom: mse102x: Return code for mse102x_rx_pkt_spi Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 052/108] wifi: rtw88: rtw8822bu VID/PID for BUFFALO WI-U2-866DM Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 053/108] wireless: purelifi: plfxlc: fix memory leak in plfxlc_usb_wreq_asyn() Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 054/108] wifi: mac80211: do not offer a mesh path if forwarding is disabled Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 055/108] bpftool: Fix cgroup command to only show cgroup bpf programs Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 056/108] clk: rockchip: rk3036: mark ddrphy as critical Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 057/108] hid-asus: check ROG Ally MCU version and warn Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 058/108] rtla: Define __NR_sched_setattr for LoongArch Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 059/108] wifi: iwlwifi: mvm: fix beacon CCK flag Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 060/108] wifi: iwlwifi: dvm: pair transport op-mode enter/leave Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 061/108] bpf: Add bpf_rbtree_{root,left,right} kfunc Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 062/108] f2fs: fix to bail out in get_new_segment() Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 063/108] netfilter: nft_set_pipapo: clamp maximum map bucket size to INT_MAX Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 064/108] libbpf: Add identical pointer detection to btf_dedup_is_equiv() Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 065/108] scsi: lpfc: Fix lpfc_check_sli_ndlp() handling for GEN_REQUEST64 commands Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 066/108] scsi: smartpqi: Add new PCI IDs Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 067/108] iommu/amd: Ensure GA log notifier callbacks finish running before module unload Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 068/108] wifi: iwlwifi: pcie: make sure to lock rxq->read Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 069/108] wifi: rtw89: 8922a: fix TX fail with wrong VCO setting Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 070/108] wifi: mac80211_hwsim: Prevent tsf from setting if beacon is disabled Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 071/108] netdevsim: Mark NAPI ID on skb in nsim_rcv Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 072/108] net/mlx5: HWS, Fix IP version decision Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 073/108] bpf: Use proper type to calculate bpf_raw_tp_null_args.mask index Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 074/108] wifi: mac80211: VLAN traffic in multicast path Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 075/108] Revert "mac80211: Dynamically set CoDel parameters per station" Sasha Levin
2025-06-04 0:54 ` [PATCH AUTOSEL 6.14 076/108] wifi: iwlwifi: Add missing MODULE_FIRMWARE for Qu-c0-jf-b0 Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 077/108] net: bridge: mcast: update multicast contex when vlan state is changed Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 078/108] net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 079/108] vxlan: Do not treat dst cache initialization errors as fatal Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 080/108] bnxt_en: Remove unused field "ref_count" in struct bnxt_ulp Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 081/108] vxlan: Add RCU read-side critical sections in the Tx path Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 082/108] wifi: ath12k: correctly handle mcast packets for clients Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 083/108] wifi: ath12k: using msdu end descriptor to check for rx multicast packets Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 084/108] net: ethernet: ti: am65-cpsw: handle -EPROBE_DEFER Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 085/108] software node: Correct a OOB check in software_node_get_reference_args() Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 086/108] wifi: ath12k: make assoc link associate first Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 087/108] isofs: fix Y2038 and Y2156 issues in Rock Ridge TF entry Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 088/108] pinctrl: mcp23s08: Reset all pins to input at probe Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 089/108] wifi: ath12k: fix failed to set mhi state error during reboot with hardware grouping Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 090/108] scsi: lpfc: Use memcpy() for BIOS version Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 091/108] sock: Correct error checking condition for (assign|release)_proto_idx() Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 092/108] i40e: fix MMIO write access to an invalid page in i40e_clear_hw Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 093/108] ixgbe: Fix unreachable retry logic in combined and byte I2C write functions Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 094/108] RDMA/hns: initialize db in update_srq_db() Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 095/108] ice: fix check for existing switch rule Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 096/108] usbnet: asix AX88772: leave the carrier control to phylink Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 097/108] f2fs: fix to set atomic write status more clear Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 098/108] bpf, sockmap: Fix data lost during EAGAIN retries Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 099/108] net: ethernet: cortina: Use TOE/TSO on all TCP Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 100/108] octeontx2-pf: Add error log forcn10k_map_unmap_rq_policer() Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 101/108] wifi: ath12k: Fix incorrect rates sent to firmware Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 102/108] wifi: ath12k: Fix the enabling of REO queue lookup table feature Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 103/108] wifi: ath12k: Fix memory leak due to multiple rx_stats allocation Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 104/108] wifi: ath11k: determine PM policy based on machine model Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 105/108] wifi: ath12k: fix link valid field initialization in the monitor Rx Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 106/108] wifi: ath12k: fix incorrect CE addresses Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 107/108] wifi: ath12k: Pass correct values of center freq1 and center freq2 for 160 MHz Sasha Levin
2025-06-04 0:55 ` [PATCH AUTOSEL 6.14 108/108] net/mlx5: HWS, Harden IP version definer checks Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250604005531.4178547-6-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=luiz.von.dentz@intel.com \
--cc=marcel@holtmann.org \
--cc=patches@lists.linux.dev \
--cc=stable@vger.kernel.org \
--cc=sunliweis@126.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox