[PATCH 04/19] drm/i915/lnl+/tc: Use the cached max lane count value

[Imre Deak <imre.deak@intel.com>]

Use the cached max lane count value on LNL+, to account for scenarios
where this value is queried after the HW cleared the corresponding pin
assignment value in the TCSS_DDI_STATUS register after the sink got
disconnected.

For consistency, follow-up changes will use the cached max lane count
value on other platforms as well and will also cache the pin assignment
value in a similar way.

Cc: stable@vger.kernel.org # v6.8+
Reported-by: Charlton Lin <charlton.lin@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/display/intel_tc.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/display/intel_tc.c b/drivers/gpu/drm/i915/display/intel_tc.c
index ea93893980e17..14042a64375e1 100644
--- a/drivers/gpu/drm/i915/display/intel_tc.c
+++ b/drivers/gpu/drm/i915/display/intel_tc.c
@@ -395,12 +395,16 @@ static void read_pin_configuration(struct intel_tc_port *tc)
 
 int intel_tc_port_max_lane_count(struct intel_digital_port *dig_port)
 {
+	struct intel_display *display = to_intel_display(dig_port);
 	struct intel_tc_port *tc = to_tc_port(dig_port);
 
 	if (!intel_encoder_is_tc(&dig_port->base))
 		return 4;
 
-	return get_max_lane_count(tc);
+	if (DISPLAY_VER(display) < 20)
+		return get_max_lane_count(tc);
+
+	return tc->max_lane_count;
 }
 
 void intel_tc_port_set_fia_lane_count(struct intel_digital_port *dig_port,
-- 
2.49.1