* FAILED: patch "[PATCH] crypto: octeontx2 - Fix address alignment issue on ucode" failed to apply to 6.6-stable tree
@ 2025-08-21 13:04 gregkh
0 siblings, 0 replies; only message in thread
From: gregkh @ 2025-08-21 13:04 UTC (permalink / raw)
To: bbhushan2, herbert, stable; +Cc: stable
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x b7b88b4939e71ef2aed8238976a2bbabcb63a790
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2025082132-trimmer-going-5925@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From b7b88b4939e71ef2aed8238976a2bbabcb63a790 Mon Sep 17 00:00:00 2001
From: Bharat Bhushan <bbhushan2@marvell.com>
Date: Thu, 22 May 2025 15:36:25 +0530
Subject: [PATCH] crypto: octeontx2 - Fix address alignment issue on ucode
loading
octeontx2 crypto driver allocates memory using kmalloc/kzalloc,
and uses this memory for dma (does dma_map_single()). It assumes
that kmalloc/kzalloc will return 128-byte aligned address. But
kmalloc/kzalloc returns 8-byte aligned address after below changes:
"9382bc44b5f5 arm64: allow kmalloc() caches aligned to the
smaller cache_line_size()"
Completion address should be 32-Byte alignment when loading
microcode.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Cc: <stable@vger.kernel.org> # v6.5+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
diff --git a/drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c b/drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c
index 9095dea2748d..56645b3eb717 100644
--- a/drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c
+++ b/drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c
@@ -1491,12 +1491,13 @@ int otx2_cpt_discover_eng_capabilities(struct otx2_cptpf_dev *cptpf)
union otx2_cpt_opcode opcode;
union otx2_cpt_res_s *result;
union otx2_cpt_inst_s inst;
+ dma_addr_t result_baddr;
dma_addr_t rptr_baddr;
struct pci_dev *pdev;
- u32 len, compl_rlen;
int timeout = 10000;
+ void *base, *rptr;
int ret, etype;
- void *rptr;
+ u32 len;
/*
* We don't get capabilities if it was already done
@@ -1519,22 +1520,28 @@ int otx2_cpt_discover_eng_capabilities(struct otx2_cptpf_dev *cptpf)
if (ret)
goto delete_grps;
- compl_rlen = ALIGN(sizeof(union otx2_cpt_res_s), OTX2_CPT_DMA_MINALIGN);
- len = compl_rlen + LOADFVC_RLEN;
+ /* Allocate extra memory for "rptr" and "result" pointer alignment */
+ len = LOADFVC_RLEN + ARCH_DMA_MINALIGN +
+ sizeof(union otx2_cpt_res_s) + OTX2_CPT_RES_ADDR_ALIGN;
- result = kzalloc(len, GFP_KERNEL);
- if (!result) {
+ base = kzalloc(len, GFP_KERNEL);
+ if (!base) {
ret = -ENOMEM;
goto lf_cleanup;
}
- rptr_baddr = dma_map_single(&pdev->dev, (void *)result, len,
- DMA_BIDIRECTIONAL);
+
+ rptr = PTR_ALIGN(base, ARCH_DMA_MINALIGN);
+ rptr_baddr = dma_map_single(&pdev->dev, rptr, len, DMA_BIDIRECTIONAL);
if (dma_mapping_error(&pdev->dev, rptr_baddr)) {
dev_err(&pdev->dev, "DMA mapping failed\n");
ret = -EFAULT;
- goto free_result;
+ goto free_rptr;
}
- rptr = (u8 *)result + compl_rlen;
+
+ result = (union otx2_cpt_res_s *)PTR_ALIGN(rptr + LOADFVC_RLEN,
+ OTX2_CPT_RES_ADDR_ALIGN);
+ result_baddr = ALIGN(rptr_baddr + LOADFVC_RLEN,
+ OTX2_CPT_RES_ADDR_ALIGN);
/* Fill in the command */
opcode.s.major = LOADFVC_MAJOR_OP;
@@ -1546,14 +1553,14 @@ int otx2_cpt_discover_eng_capabilities(struct otx2_cptpf_dev *cptpf)
/* 64-bit swap for microcode data reads, not needed for addresses */
cpu_to_be64s(&iq_cmd.cmd.u);
iq_cmd.dptr = 0;
- iq_cmd.rptr = rptr_baddr + compl_rlen;
+ iq_cmd.rptr = rptr_baddr;
iq_cmd.cptr.u = 0;
for (etype = 1; etype < OTX2_CPT_MAX_ENG_TYPES; etype++) {
result->s.compcode = OTX2_CPT_COMPLETION_CODE_INIT;
iq_cmd.cptr.s.grp = otx2_cpt_get_eng_grp(&cptpf->eng_grps,
etype);
- otx2_cpt_fill_inst(&inst, &iq_cmd, rptr_baddr);
+ otx2_cpt_fill_inst(&inst, &iq_cmd, result_baddr);
lfs->ops->send_cmd(&inst, 1, &cptpf->lfs.lf[0]);
timeout = 10000;
@@ -1576,8 +1583,8 @@ int otx2_cpt_discover_eng_capabilities(struct otx2_cptpf_dev *cptpf)
error_no_response:
dma_unmap_single(&pdev->dev, rptr_baddr, len, DMA_BIDIRECTIONAL);
-free_result:
- kfree(result);
+free_rptr:
+ kfree(base);
lf_cleanup:
otx2_cptlf_shutdown(lfs);
delete_grps:
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2025-08-21 13:05 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-08-21 13:04 FAILED: patch "[PATCH] crypto: octeontx2 - Fix address alignment issue on ucode" failed to apply to 6.6-stable tree gregkh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox