From: <jinfeng.wang.cn@windriver.com>
To: <gregkh@linuxfoundation.org>, <d-gole@ti.com>, <ronald.wahl@legrand.com>
Cc: <broonie@kernel.org>, <matthew.gerlach@altera.com>,
<khairul.anuar.romli@altera.com>, <stable@vger.kernel.org>
Subject: [PATCH 6.6 1/2] Revert "spi: cadence-quadspi: fix cleanup of rx_chan on failure paths"
Date: Wed, 3 Sep 2025 15:58:14 +0800 [thread overview]
Message-ID: <20250903075815.1034962-1-jinfeng.wang.cn@windriver.com> (raw)
From: Jinfeng Wang <jinfeng.wang.cn@windriver.com>
This reverts commit 1af6d1696ca40b2d22889b4b8bbea616f94aaa84.
There is cadence-qspi ff8d2000.spi: Unbalanced pm_runtime_enable! error
without this revert.
After reverting commit cdfb20e4b34a ("spi: spi-cadence-quadspi: Fix pm runtime unbalance")
and commit 1af6d1696ca4 ("spi: cadence-quadspi: fix cleanup of rx_chan on failure paths"),
Unbalanced pm_runtime_enable! error does not appear.
These two commits are backported from upstream commit b07f349d1864 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance")
and commit 04a8ff1bc351 ("spi: cadence-quadspi: fix cleanup of rx_chan on failure paths").
The commit 04a8ff1bc351 ("spi: cadence-quadspi: fix cleanup of rx_chan on failure paths")
fix commit b07f349d1864 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance").
The commit b07f349d1864 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance") fix
commit 86401132d7bb ("spi: spi-cadence-quadspi: Fix missing unwind goto warnings").
The commit 86401132d7bb ("spi: spi-cadence-quadspi: Fix missing unwind goto warnings") fix
commit 0578a6dbfe75 ("spi: spi-cadence-quadspi: add runtime pm support").
6.6.y only backport commit b07f349d1864 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance")
and commit 04a8ff1bc351 ("spi: cadence-quadspi: fix cleanup of rx_chan on failure paths"),
but does not backport commit 0578a6dbfe75 ("spi: spi-cadence-quadspi: add runtime pm support")
and commit 86401132d7bb ("spi: spi-cadence-quadspi: Fix missing unwind goto warnings").
And the backport of commit b07f349d1864 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance")
differs with the original patch. So there is Unbalanced pm_runtime_enable error.
If revert the backport for commit b07f349d1864 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance")
and commit 04a8ff1bc351 ("spi: cadence-quadspi: fix cleanup of rx_chan on failure paths"), there is no error.
If backport commit 0578a6dbfe75 ("spi: spi-cadence-quadspi: add runtime pm support") and
commit 86401132d7bb ("spi: spi-cadence-quadspi: Fix missing unwind goto warnings"), there
is hang during booting. I didn't find the cause of the hang.
Since commit 0578a6dbfe75 ("spi: spi-cadence-quadspi: add runtime pm support") and
commit 86401132d7bb ("spi: spi-cadence-quadspi: Fix missing unwind goto warnings") are
not backported, commit b07f349d1864 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance")
and commit 04a8ff1bc351 ("spi: cadence-quadspi: fix cleanup of rx_chan on failure paths") are not needed.
So revert commits commit cdfb20e4b34a ("spi: spi-cadence-quadspi: Fix pm runtime unbalance") and
commit 1af6d1696ca4 ("spi: cadence-quadspi: fix cleanup of rx_chan on failure paths").
Signed-off-by: Jinfeng Wang <jinfeng.wang.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
---
Kernel builds successfully with patch.
Test enviroment overview:
Branch linux-6.6.y
Tree: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Hardware: compiled on X86 machine
GCC: gcc version 11.4.0 (Ubuntu~20.04)
commands: make clean;make allyesconfig;
no building error is seen
gcc version 11.4.0 (Ubuntu 11.4.0-1ubuntu1~22.04.2)
Hardware: compiled on socfpga stratix10 board
verified by check the dmesg log and bind/unbind spi
and no Unbalanced pm_runtime_enable! error is seen any more.
cmds:
dmesg | grep "Unbalanced pm_runtime_enable"
echo ff8d2000.spi > /sys/bus/platform/drivers/cadence-qspi/unbind
echo ff8d2000.spi > /sys/bus/platform/drivers/cadence-qspi/bind
---
drivers/spi/spi-cadence-quadspi.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index 7c17b8c0425e..9285a683324f 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -1870,6 +1870,11 @@ static int cqspi_probe(struct platform_device *pdev)
pm_runtime_enable(dev);
+ if (cqspi->rx_chan) {
+ dma_release_channel(cqspi->rx_chan);
+ goto probe_setup_failed;
+ }
+
ret = spi_register_controller(host);
if (ret) {
dev_err(&pdev->dev, "failed to register SPI ctlr %d\n", ret);
--
2.25.1
next reply other threads:[~2025-09-03 7:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-03 7:58 jinfeng.wang.cn [this message]
2025-09-03 7:58 ` [PATCH 6.6 2/2] Revert "spi: spi-cadence-quadspi: Fix pm runtime unbalance" jinfeng.wang.cn
2025-09-03 8:22 ` [PATCH 6.6 1/2] Revert "spi: cadence-quadspi: fix cleanup of rx_chan on failure paths" Greg KH
2025-09-04 6:54 ` Jinfeng Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250903075815.1034962-1-jinfeng.wang.cn@windriver.com \
--to=jinfeng.wang.cn@windriver.com \
--cc=broonie@kernel.org \
--cc=d-gole@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=khairul.anuar.romli@altera.com \
--cc=matthew.gerlach@altera.com \
--cc=ronald.wahl@legrand.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox