From: Breno Leitao <leitao@debian.org>
To: "David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>, Simon Horman <horms@kernel.org>,
Uday Shankar <ushankar@purestorage.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
clm@meta.com, kernel-team@meta.com, stable@vger.kernel.org,
Breno Leitao <leitao@debian.org>
Subject: [PATCH net] netpoll: pass buffer size to egress_dev() to avoid MAC truncation
Date: Fri, 01 May 2026 02:58:41 -0700 [thread overview]
Message-ID: <20260501-netpoll_snprintf_fix-v1-1-84b0566e6597@debian.org> (raw)
egress_dev() formats np->dev_mac via snprintf() but receives buf as
a bare char *, so it cannot derive the buffer size from the pointer. The
size argument was hardcoded to MAC_ADDR_STR_LEN (3 * ETH_ALEN - 1 = 17),
which is silly wrong in two ways:
1) misleading kernel log output on the MAC-selected target path
(np->dev_name[0] == '\0'); for example "aa:bb:cc:dd:ee:ff doesn't
exist, aborting" was logged as "aa:bb:cc:dd:ee:f doesn't exist,
aborting".
2) the second argument of snprintf is the size of the buffer, not the
size of what you want to write.
Add a bufsz parameter to egress_dev() and pass sizeof(buf) from each
caller, matching the standard snprintf() idiom and removing the
hardcoded size from the helper.
Every caller already declares "char buf[MAC_ADDR_STR_LEN + 1]" so the
formatted MAC continues to fit.
Tested by booting with
netconsole=6665@/aa:bb:cc:dd:ee:ff,6666@10.0.0.1/00:11:22:33:44:55
on a kernel without a matching device. Pre-fix dmesg shows
"aa:bb:cc:dd:ee:f doesn't exist, aborting"; post-fix shows the full
"aa:bb:cc:dd:ee:ff doesn't exist, aborting".
Fixes: f8a10bed32f5 ("netconsole: allow selection of egress interface via MAC address")
Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
---
net/core/netpoll.c | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 4381e0fc25bf4..84faace50ac28 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -608,14 +608,16 @@ EXPORT_SYMBOL_GPL(__netpoll_setup);
/*
* Returns a pointer to a string representation of the identifier used
* to select the egress interface for the given netpoll instance. buf
- * must be a buffer of length at least MAC_ADDR_STR_LEN + 1.
+ * is used to format np->dev_mac when np->dev_name is empty; bufsz must
+ * be at least MAC_ADDR_STR_LEN + 1 to fit the formatted MAC address
+ * and its NUL terminator.
*/
-static char *egress_dev(struct netpoll *np, char *buf)
+static char *egress_dev(struct netpoll *np, char *buf, size_t bufsz)
{
if (np->dev_name[0])
return np->dev_name;
- snprintf(buf, MAC_ADDR_STR_LEN, "%pM", np->dev_mac);
+ snprintf(buf, bufsz, "%pM", np->dev_mac);
return buf;
}
@@ -645,7 +647,7 @@ static int netpoll_take_ipv6(struct netpoll *np, struct net_device *ndev)
if (!IS_ENABLED(CONFIG_IPV6)) {
np_err(np, "IPv6 is not supported %s, aborting\n",
- egress_dev(np, buf));
+ egress_dev(np, buf, sizeof(buf)));
return -EINVAL;
}
@@ -667,7 +669,7 @@ static int netpoll_take_ipv6(struct netpoll *np, struct net_device *ndev)
}
if (err) {
np_err(np, "no IPv6 address for %s, aborting\n",
- egress_dev(np, buf));
+ egress_dev(np, buf, sizeof(buf)));
return err;
}
@@ -687,14 +689,14 @@ static int netpoll_take_ipv4(struct netpoll *np, struct net_device *ndev)
in_dev = __in_dev_get_rtnl(ndev);
if (!in_dev) {
np_err(np, "no IP address for %s, aborting\n",
- egress_dev(np, buf));
+ egress_dev(np, buf, sizeof(buf)));
return -EDESTADDRREQ;
}
ifa = rtnl_dereference(in_dev->ifa_list);
if (!ifa) {
np_err(np, "no IP address for %s, aborting\n",
- egress_dev(np, buf));
+ egress_dev(np, buf, sizeof(buf)));
return -EDESTADDRREQ;
}
@@ -736,7 +738,8 @@ int netpoll_setup(struct netpoll *np)
ndev = dev_getbyhwaddr(net, ARPHRD_ETHER, np->dev_mac);
if (!ndev) {
- np_err(np, "%s doesn't exist, aborting\n", egress_dev(np, buf));
+ np_err(np, "%s doesn't exist, aborting\n",
+ egress_dev(np, buf, sizeof(buf)));
err = -ENODEV;
goto unlock;
}
@@ -744,14 +747,14 @@ int netpoll_setup(struct netpoll *np)
if (netdev_master_upper_dev_get(ndev)) {
np_err(np, "%s is a slave device, aborting\n",
- egress_dev(np, buf));
+ egress_dev(np, buf, sizeof(buf)));
err = -EBUSY;
goto put;
}
if (!netif_running(ndev)) {
np_info(np, "device %s not up yet, forcing it\n",
- egress_dev(np, buf));
+ egress_dev(np, buf, sizeof(buf)));
err = dev_open(ndev, NULL);
if (err) {
---
base-commit: edf4bee4215a173c0534d1851d7523d827149f9e
change-id: 20260501-netpoll_snprintf_fix-95b40d048f18
Best regards,
--
Breno Leitao <leitao@debian.org>
next reply other threads:[~2026-05-01 9:59 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-01 9:58 Breno Leitao [this message]
2026-05-05 2:00 ` [PATCH net] netpoll: pass buffer size to egress_dev() to avoid MAC truncation patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260501-netpoll_snprintf_fix-v1-1-84b0566e6597@debian.org \
--to=leitao@debian.org \
--cc=clm@meta.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=kernel-team@meta.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=stable@vger.kernel.org \
--cc=ushankar@purestorage.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox