[PATCH 6.18.y 1/2] phy: qcom: m31-eusb2: Update init sequence to set PHY_ENABLE

[Sasha Levin <sashal@kernel.org>]

From: Ronak Raheja <ronak.raheja@oss.qualcomm.com>

[ Upstream commit 7044ed6749c8a7d49e67b2f07f42da2f29d26be6 ]

Certain platforms may not have the PHY_ENABLE bit set on power on reset.
Update the current sequence to explicitly write to enable the PHY_ENABLE
bit.  This ensures that regardless of the platform, the PHY is properly
enabled.

Signed-off-by: Ronak Raheja <ronak.raheja@oss.qualcomm.com>
Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20250920032158.242725-1-wesley.cheng@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 520a98bdf7ae ("phy: qcom: m31-eusb2: clear PLL_EN during init")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/qualcomm/phy-qcom-m31-eusb2.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c b/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c
index 0a0d2d9fc8464..95cd3175926d5 100644
--- a/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c
@@ -25,6 +25,7 @@
 #define POR				BIT(1)
 
 #define USB_PHY_HS_PHY_CTRL_COMMON0	(0x54)
+#define PHY_ENABLE			BIT(0)
 #define SIDDQ_SEL			BIT(1)
 #define SIDDQ				BIT(2)
 #define FSEL				GENMASK(6, 4)
@@ -81,6 +82,7 @@ struct m31_eusb2_priv_data {
 static const struct m31_phy_tbl_entry m31_eusb2_setup_tbl[] = {
 	M31_EUSB_PHY_INIT_CFG(USB_PHY_CFG0, UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 1),
 	M31_EUSB_PHY_INIT_CFG(USB_PHY_UTMI_CTRL5, POR, 1),
+	M31_EUSB_PHY_INIT_CFG(USB_PHY_HS_PHY_CTRL_COMMON0, PHY_ENABLE, 1),
 	M31_EUSB_PHY_INIT_CFG(USB_PHY_CFG1, PLL_EN, 1),
 	M31_EUSB_PHY_INIT_CFG(USB_PHY_FSEL_SEL, FSEL_SEL, 1),
 };
-- 
2.53.0