FAILED: patch "[PATCH] iio: frequency: admv1013: fix NULL pointer dereference on str" failed to apply to 7.0-stable tree

FAILED: patch "[PATCH] iio: frequency: admv1013: fix NULL pointer dereference on str" failed to apply to 7.0-stable tree

[gregkh]

The patch below does not apply to the 7.0-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-7.0.y
git checkout FETCH_HEAD
git cherry-pick -x aac0a51b16700b403a55b67ba495de021db78763
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026050120-elderly-headache-15ed@gregkh' --subject-prefix 'PATCH 7.0.y' HEAD^..

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From aac0a51b16700b403a55b67ba495de021db78763 Mon Sep 17 00:00:00 2001
From: Antoniu Miclaus <antoniu.miclaus@analog.com>
Date: Thu, 5 Mar 2026 11:14:48 +0200
Subject: [PATCH] iio: frequency: admv1013: fix NULL pointer dereference on str
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

When device_property_read_string() fails, str is left uninitialized
but the code falls through to strcmp(str, ...), dereferencing a garbage
pointer. Replace manual read/strcmp with
device_property_match_property_string() and consolidate the SE mode
enums into a single sequential enum, mapping to hardware register
values via a switch consistent with other bitfields in the driver.

Several cleanup patches have been applied to this driver recently so
this will need a manual backport.

Fixes: da35a7b526d9 ("iio: frequency: admv1013: add support for ADMV1013")
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

diff --git a/drivers/iio/frequency/admv1013.c b/drivers/iio/frequency/admv1013.c
index 9202443ef445..b852378b3f68 100644
--- a/drivers/iio/frequency/admv1013.c
+++ b/drivers/iio/frequency/admv1013.c
@@ -85,9 +85,9 @@ enum {
 };
 
 enum {
-	ADMV1013_SE_MODE_POS = 6,
-	ADMV1013_SE_MODE_NEG = 9,
-	ADMV1013_SE_MODE_DIFF = 12
+	ADMV1013_SE_MODE_POS,
+	ADMV1013_SE_MODE_NEG,
+	ADMV1013_SE_MODE_DIFF,
 };
 
 struct admv1013_state {
@@ -468,10 +468,23 @@ static int admv1013_init(struct admv1013_state *st, int vcm_uv)
 	if (ret)
 		return ret;
 
-	data = FIELD_PREP(ADMV1013_QUAD_SE_MODE_MSK, st->quad_se_mode);
+	switch (st->quad_se_mode) {
+	case ADMV1013_SE_MODE_POS:
+		data = 6;
+		break;
+	case ADMV1013_SE_MODE_NEG:
+		data = 9;
+		break;
+	case ADMV1013_SE_MODE_DIFF:
+		data = 12;
+		break;
+	default:
+		return -EINVAL;
+	}
 
 	ret = __admv1013_spi_update_bits(st, ADMV1013_REG_QUAD,
-					 ADMV1013_QUAD_SE_MODE_MSK, data);
+					 ADMV1013_QUAD_SE_MODE_MSK,
+					 FIELD_PREP(ADMV1013_QUAD_SE_MODE_MSK, data));
 	if (ret)
 		return ret;
 
@@ -512,37 +525,33 @@ static void admv1013_powerdown(void *data)
 	admv1013_spi_update_bits(data, ADMV1013_REG_ENABLE, enable_reg_msk, enable_reg);
 }
 
+static const char * const admv1013_input_modes[] = {
+	[ADMV1013_IQ_MODE] = "iq",
+	[ADMV1013_IF_MODE] = "if",
+};
+
+static const char * const admv1013_quad_se_modes[] = {
+	[ADMV1013_SE_MODE_POS] = "se-pos",
+	[ADMV1013_SE_MODE_NEG] = "se-neg",
+	[ADMV1013_SE_MODE_DIFF] = "diff",
+};
+
 static int admv1013_properties_parse(struct admv1013_state *st)
 {
 	int ret;
-	const char *str;
 	struct device *dev = &st->spi->dev;
 
 	st->det_en = device_property_read_bool(dev, "adi,detector-enable");
 
-	ret = device_property_read_string(dev, "adi,input-mode", &str);
-	if (ret)
-		st->input_mode = ADMV1013_IQ_MODE;
+	ret = device_property_match_property_string(dev, "adi,input-mode",
+						    admv1013_input_modes,
+						    ARRAY_SIZE(admv1013_input_modes));
+	st->input_mode = ret >= 0 ? ret : ADMV1013_IQ_MODE;
 
-	if (!strcmp(str, "iq"))
-		st->input_mode = ADMV1013_IQ_MODE;
-	else if (!strcmp(str, "if"))
-		st->input_mode = ADMV1013_IF_MODE;
-	else
-		return -EINVAL;
-
-	ret = device_property_read_string(dev, "adi,quad-se-mode", &str);
-	if (ret)
-		st->quad_se_mode = ADMV1013_SE_MODE_DIFF;
-
-	if (!strcmp(str, "diff"))
-		st->quad_se_mode = ADMV1013_SE_MODE_DIFF;
-	else if (!strcmp(str, "se-pos"))
-		st->quad_se_mode = ADMV1013_SE_MODE_POS;
-	else if (!strcmp(str, "se-neg"))
-		st->quad_se_mode = ADMV1013_SE_MODE_NEG;
-	else
-		return -EINVAL;
+	ret = device_property_match_property_string(dev, "adi,quad-se-mode",
+						    admv1013_quad_se_modes,
+						    ARRAY_SIZE(admv1013_quad_se_modes));
+	st->quad_se_mode = ret >= 0 ? ret : ADMV1013_SE_MODE_DIFF;
 
 	ret = devm_regulator_bulk_get_enable(dev,
 					     ARRAY_SIZE(admv1013_vcc_regs),

[PATCH 7.0.y 1/2] iio: frequency: admv1013: add dev variable

[Sasha Levin]

From: Antoniu Miclaus <antoniu.miclaus@analog.com>

[ Upstream commit e61b5bb0e91390adee41eaddc0a1a7d55d5652b2 ]

Introduce a local struct device pointer in functions that reference
&spi->dev for device-managed resource calls and device property reads,
improving code readability.

Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: aac0a51b1670 ("iio: frequency: admv1013: fix NULL pointer dereference on str")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/frequency/admv1013.c | 29 +++++++++++++++--------------
 1 file changed, 15 insertions(+), 14 deletions(-)

diff --git a/drivers/iio/frequency/admv1013.c b/drivers/iio/frequency/admv1013.c
index d8e8d541990f8..d29e288da011a 100644
--- a/drivers/iio/frequency/admv1013.c
+++ b/drivers/iio/frequency/admv1013.c
@@ -518,11 +518,11 @@ static int admv1013_properties_parse(struct admv1013_state *st)
 {
 	int ret;
 	const char *str;
-	struct spi_device *spi = st->spi;
+	struct device *dev = &st->spi->dev;
 
-	st->det_en = device_property_read_bool(&spi->dev, "adi,detector-enable");
+	st->det_en = device_property_read_bool(dev, "adi,detector-enable");
 
-	ret = device_property_read_string(&spi->dev, "adi,input-mode", &str);
+	ret = device_property_read_string(dev, "adi,input-mode", &str);
 	if (ret)
 		st->input_mode = ADMV1013_IQ_MODE;
 
@@ -533,7 +533,7 @@ static int admv1013_properties_parse(struct admv1013_state *st)
 	else
 		return -EINVAL;
 
-	ret = device_property_read_string(&spi->dev, "adi,quad-se-mode", &str);
+	ret = device_property_read_string(dev, "adi,quad-se-mode", &str);
 	if (ret)
 		st->quad_se_mode = ADMV1013_SE_MODE_DIFF;
 
@@ -546,11 +546,11 @@ static int admv1013_properties_parse(struct admv1013_state *st)
 	else
 		return -EINVAL;
 
-	ret = devm_regulator_bulk_get_enable(&st->spi->dev,
+	ret = devm_regulator_bulk_get_enable(dev,
 					     ARRAY_SIZE(admv1013_vcc_regs),
 					     admv1013_vcc_regs);
 	if (ret) {
-		dev_err_probe(&spi->dev, ret,
+		dev_err_probe(dev, ret,
 			      "Failed to request VCC regulators\n");
 		return ret;
 	}
@@ -562,9 +562,10 @@ static int admv1013_probe(struct spi_device *spi)
 {
 	struct iio_dev *indio_dev;
 	struct admv1013_state *st;
+	struct device *dev = &spi->dev;
 	int ret, vcm_uv;
 
-	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
 	if (!indio_dev)
 		return -ENOMEM;
 
@@ -581,20 +582,20 @@ static int admv1013_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
-	ret = devm_regulator_get_enable_read_voltage(&spi->dev, "vcm");
+	ret = devm_regulator_get_enable_read_voltage(dev, "vcm");
 	if (ret < 0)
-		return dev_err_probe(&spi->dev, ret,
+		return dev_err_probe(dev, ret,
 				     "failed to get the common-mode voltage\n");
 
 	vcm_uv = ret;
 
-	st->clkin = devm_clk_get_enabled(&spi->dev, "lo_in");
+	st->clkin = devm_clk_get_enabled(dev, "lo_in");
 	if (IS_ERR(st->clkin))
-		return dev_err_probe(&spi->dev, PTR_ERR(st->clkin),
+		return dev_err_probe(dev, PTR_ERR(st->clkin),
 				     "failed to get the LO input clock\n");
 
 	st->nb.notifier_call = admv1013_freq_change;
-	ret = devm_clk_notifier_register(&spi->dev, st->clkin, &st->nb);
+	ret = devm_clk_notifier_register(dev, st->clkin, &st->nb);
 	if (ret)
 		return ret;
 
@@ -606,11 +607,11 @@ static int admv1013_probe(struct spi_device *spi)
 		return ret;
 	}
 
-	ret = devm_add_action_or_reset(&spi->dev, admv1013_powerdown, st);
+	ret = devm_add_action_or_reset(dev, admv1013_powerdown, st);
 	if (ret)
 		return ret;
 
-	return devm_iio_device_register(&spi->dev, indio_dev);
+	return devm_iio_device_register(dev, indio_dev);
 }
 
 static const struct spi_device_id admv1013_id[] = {
-- 
2.53.0

[PATCH 7.0.y 2/2] iio: frequency: admv1013: fix NULL pointer dereference on str

[Sasha Levin]

From: Antoniu Miclaus <antoniu.miclaus@analog.com>

[ Upstream commit aac0a51b16700b403a55b67ba495de021db78763 ]

When device_property_read_string() fails, str is left uninitialized
but the code falls through to strcmp(str, ...), dereferencing a garbage
pointer. Replace manual read/strcmp with
device_property_match_property_string() and consolidate the SE mode
enums into a single sequential enum, mapping to hardware register
values via a switch consistent with other bitfields in the driver.

Several cleanup patches have been applied to this driver recently so
this will need a manual backport.

Fixes: da35a7b526d9 ("iio: frequency: admv1013: add support for ADMV1013")
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/frequency/admv1013.c | 65 ++++++++++++++++++--------------
 1 file changed, 37 insertions(+), 28 deletions(-)

diff --git a/drivers/iio/frequency/admv1013.c b/drivers/iio/frequency/admv1013.c
index d29e288da011a..5cea2c9887905 100644
--- a/drivers/iio/frequency/admv1013.c
+++ b/drivers/iio/frequency/admv1013.c
@@ -85,9 +85,9 @@ enum {
 };
 
 enum {
-	ADMV1013_SE_MODE_POS = 6,
-	ADMV1013_SE_MODE_NEG = 9,
-	ADMV1013_SE_MODE_DIFF = 12
+	ADMV1013_SE_MODE_POS,
+	ADMV1013_SE_MODE_NEG,
+	ADMV1013_SE_MODE_DIFF,
 };
 
 struct admv1013_state {
@@ -470,10 +470,23 @@ static int admv1013_init(struct admv1013_state *st, int vcm_uv)
 	if (ret)
 		return ret;
 
-	data = FIELD_PREP(ADMV1013_QUAD_SE_MODE_MSK, st->quad_se_mode);
+	switch (st->quad_se_mode) {
+	case ADMV1013_SE_MODE_POS:
+		data = 6;
+		break;
+	case ADMV1013_SE_MODE_NEG:
+		data = 9;
+		break;
+	case ADMV1013_SE_MODE_DIFF:
+		data = 12;
+		break;
+	default:
+		return -EINVAL;
+	}
 
 	ret = __admv1013_spi_update_bits(st, ADMV1013_REG_QUAD,
-					 ADMV1013_QUAD_SE_MODE_MSK, data);
+					 ADMV1013_QUAD_SE_MODE_MSK,
+					 FIELD_PREP(ADMV1013_QUAD_SE_MODE_MSK, data));
 	if (ret)
 		return ret;
 
@@ -514,37 +527,33 @@ static void admv1013_powerdown(void *data)
 	admv1013_spi_update_bits(data, ADMV1013_REG_ENABLE, enable_reg_msk, enable_reg);
 }
 
+static const char * const admv1013_input_modes[] = {
+	[ADMV1013_IQ_MODE] = "iq",
+	[ADMV1013_IF_MODE] = "if",
+};
+
+static const char * const admv1013_quad_se_modes[] = {
+	[ADMV1013_SE_MODE_POS] = "se-pos",
+	[ADMV1013_SE_MODE_NEG] = "se-neg",
+	[ADMV1013_SE_MODE_DIFF] = "diff",
+};
+
 static int admv1013_properties_parse(struct admv1013_state *st)
 {
 	int ret;
-	const char *str;
 	struct device *dev = &st->spi->dev;
 
 	st->det_en = device_property_read_bool(dev, "adi,detector-enable");
 
-	ret = device_property_read_string(dev, "adi,input-mode", &str);
-	if (ret)
-		st->input_mode = ADMV1013_IQ_MODE;
-
-	if (!strcmp(str, "iq"))
-		st->input_mode = ADMV1013_IQ_MODE;
-	else if (!strcmp(str, "if"))
-		st->input_mode = ADMV1013_IF_MODE;
-	else
-		return -EINVAL;
+	ret = device_property_match_property_string(dev, "adi,input-mode",
+						    admv1013_input_modes,
+						    ARRAY_SIZE(admv1013_input_modes));
+	st->input_mode = ret >= 0 ? ret : ADMV1013_IQ_MODE;
 
-	ret = device_property_read_string(dev, "adi,quad-se-mode", &str);
-	if (ret)
-		st->quad_se_mode = ADMV1013_SE_MODE_DIFF;
-
-	if (!strcmp(str, "diff"))
-		st->quad_se_mode = ADMV1013_SE_MODE_DIFF;
-	else if (!strcmp(str, "se-pos"))
-		st->quad_se_mode = ADMV1013_SE_MODE_POS;
-	else if (!strcmp(str, "se-neg"))
-		st->quad_se_mode = ADMV1013_SE_MODE_NEG;
-	else
-		return -EINVAL;
+	ret = device_property_match_property_string(dev, "adi,quad-se-mode",
+						    admv1013_quad_se_modes,
+						    ARRAY_SIZE(admv1013_quad_se_modes));
+	st->quad_se_mode = ret >= 0 ? ret : ADMV1013_SE_MODE_DIFF;
 
 	ret = devm_regulator_bulk_get_enable(dev,
 					     ARRAY_SIZE(admv1013_vcc_regs),
-- 
2.53.0