* FAILED: patch "[PATCH] tty: serial: samsung: Remove redundant port lock acquisition" failed to apply to 5.15-stable tree
@ 2026-06-04 10:41 gregkh
2026-06-05 18:31 ` [PATCH 5.15.y 1/3] serial: samsung_tty: Use port lock wrappers Sasha Levin
0 siblings, 1 reply; 4+ messages in thread
From: gregkh @ 2026-06-04 10:41 UTC (permalink / raw)
To: tudor.ambarus, gregkh, john.ogness, stable; +Cc: stable
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x a3bb136bff5e6a5e48cdd813246c9c4686feaaa9
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026060429-saddling-hacked-b97c@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From a3bb136bff5e6a5e48cdd813246c9c4686feaaa9 Mon Sep 17 00:00:00 2001
From: Tudor Ambarus <tudor.ambarus@linaro.org>
Date: Fri, 15 May 2026 12:41:21 +0000
Subject: [PATCH] tty: serial: samsung: Remove redundant port lock acquisition
in rx helpers
Sashiko identified a deadlock when the console flow is engaged [1].
When console flow control is enabled (UPF_CONS_FLOW),
s3c24xx_serial_stop_tx() calls s3c24xx_serial_rx_enable() and
s3c24xx_serial_start_tx() calls s3c24xx_serial_rx_disable().
The serial core framework invokes the .stop_tx() and .start_tx()
callbacks with the port->lock spinlock already held. Furthermore, all
internal driver paths that invoke stop_tx (such as the DMA TX
completion handler s3c24xx_serial_tx_dma_complete() or the PIO TX IRQ
handler s3c24xx_serial_tx_irq()) also acquire port->lock prior to
calling it. (Note that s3c24xx_serial_start_tx() is only invoked by the
serial core).
However, s3c24xx_serial_rx_enable() and s3c24xx_serial_rx_disable()
unconditionally attempt to acquire port->lock again using
uart_port_lock_irqsave(). Since spinlocks are not recursive, this
causes a deadlock on the same CPU when console flow control is engaged.
Remove the redundant lock acquisition from both rx helper functions.
Cc: stable <stable@kernel.org>
Fixes: b497549a035c ("[ARM] S3C24XX: Split serial driver into core and per-cpu drivers")
Reported-by: John Ogness <john.ogness@linutronix.de>
Closes: https://sashiko.dev/#/patchset/20260506121606.5805-1-john.ogness%40linutronix.de [1]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20260515-samsung-tty-flow-control-deadlock-v1-1-93255edbc9bc@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index e27806bf2cf3..17cd5bb100b1 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -245,12 +245,9 @@ static bool s3c24xx_serial_txempty_nofifo(const struct uart_port *port)
static void s3c24xx_serial_rx_enable(struct uart_port *port)
{
struct s3c24xx_uart_port *ourport = to_ourport(port);
- unsigned long flags;
int count = 10000;
u32 ucon, ufcon;
- uart_port_lock_irqsave(port, &flags);
-
while (--count && !s3c24xx_serial_txempty_nofifo(port))
udelay(100);
@@ -263,23 +260,18 @@ static void s3c24xx_serial_rx_enable(struct uart_port *port)
wr_regl(port, S3C2410_UCON, ucon);
ourport->rx_enabled = 1;
- uart_port_unlock_irqrestore(port, flags);
}
static void s3c24xx_serial_rx_disable(struct uart_port *port)
{
struct s3c24xx_uart_port *ourport = to_ourport(port);
- unsigned long flags;
u32 ucon;
- uart_port_lock_irqsave(port, &flags);
-
ucon = rd_regl(port, S3C2410_UCON);
ucon &= ~S3C2410_UCON_RXIRQMODE;
wr_regl(port, S3C2410_UCON, ucon);
ourport->rx_enabled = 0;
- uart_port_unlock_irqrestore(port, flags);
}
static void s3c24xx_serial_stop_tx(struct uart_port *port)
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 5.15.y 1/3] serial: samsung_tty: Use port lock wrappers 2026-06-04 10:41 FAILED: patch "[PATCH] tty: serial: samsung: Remove redundant port lock acquisition" failed to apply to 5.15-stable tree gregkh @ 2026-06-05 18:31 ` Sasha Levin 2026-06-05 18:31 ` [PATCH 5.15.y 2/3] tty: serial: samsung: use u32 for register interactions Sasha Levin 2026-06-05 18:31 ` [PATCH 5.15.y 3/3] tty: serial: samsung: Remove redundant port lock acquisition in rx helpers Sasha Levin 0 siblings, 2 replies; 4+ messages in thread From: Sasha Levin @ 2026-06-05 18:31 UTC (permalink / raw) To: stable; +Cc: Thomas Gleixner, John Ogness, Greg Kroah-Hartman, Sasha Levin From: Thomas Gleixner <tglx@linutronix.de> [ Upstream commit 97d7a9aeba1d424c2359f1686d02c75d798ad184 ] When a serial port is used for kernel console output, then all modifications to the UART registers which are done from other contexts, e.g. getty, termios, are interference points for the kernel console. So far this has been ignored and the printk output is based on the principle of hope. The rework of the console infrastructure which aims to support threaded and atomic consoles, requires to mark sections which modify the UART registers as unsafe. This allows the atomic write function to make informed decisions and eventually to restore operational state. It also allows to prevent the regular UART code from modifying UART registers while printk output is in progress. All modifications of UART registers are guarded by the UART port lock, which provides an obvious synchronization point with the console infrastructure. To avoid adding this functionality to all UART drivers, wrap the spin_[un]lock*() invocations for uart_port::lock into helper functions which just contain the spin_[un]lock*() invocations for now. In a subsequent step these helpers will gain the console synchronization mechanisms. Converted with coccinelle. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20230914183831.587273-54-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: a3bb136bff5e ("tty: serial: samsung: Remove redundant port lock acquisition in rx helpers") Signed-off-by: Sasha Levin <sashal@kernel.org> --- drivers/tty/serial/samsung_tty.c | 44 ++++++++++++++++---------------- 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c index 7d3630ddebb39e..5f05336b448599 100644 --- a/drivers/tty/serial/samsung_tty.c +++ b/drivers/tty/serial/samsung_tty.c @@ -246,7 +246,7 @@ static void s3c24xx_serial_rx_enable(struct uart_port *port) unsigned int ucon, ufcon; int count = 10000; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); while (--count && !s3c24xx_serial_txempty_nofifo(port)) udelay(100); @@ -260,7 +260,7 @@ static void s3c24xx_serial_rx_enable(struct uart_port *port) wr_regl(port, S3C2410_UCON, ucon); ourport->rx_enabled = 1; - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } static void s3c24xx_serial_rx_disable(struct uart_port *port) @@ -269,14 +269,14 @@ static void s3c24xx_serial_rx_disable(struct uart_port *port) unsigned long flags; unsigned int ucon; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); ucon = rd_regl(port, S3C2410_UCON); ucon &= ~S3C2410_UCON_RXIRQMODE; wr_regl(port, S3C2410_UCON, ucon); ourport->rx_enabled = 0; - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } static void s3c24xx_serial_stop_tx(struct uart_port *port) @@ -344,7 +344,7 @@ static void s3c24xx_serial_tx_dma_complete(void *args) dma->tx_transfer_addr, dma->tx_size, DMA_TO_DEVICE); - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); port->icount.tx += count; @@ -354,7 +354,7 @@ static void s3c24xx_serial_tx_dma_complete(void *args) uart_write_wakeup(port); s3c24xx_serial_start_next_tx(ourport); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } static void enable_tx_dma(struct s3c24xx_uart_port *ourport) @@ -620,7 +620,7 @@ static void s3c24xx_serial_rx_dma_complete(void *args) received = dma->rx_bytes_requested - state.residue; async_tx_ack(dma->rx_desc); - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); if (received) s3c24xx_uart_copy_rx_to_tty(ourport, t, received); @@ -632,7 +632,7 @@ static void s3c24xx_serial_rx_dma_complete(void *args) s3c64xx_start_rx_dma(ourport); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport) @@ -723,7 +723,7 @@ static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id) utrstat = rd_regl(port, S3C2410_UTRSTAT); rd_regl(port, S3C2410_UFSTAT); - spin_lock(&port->lock); + uart_port_lock(port); if (!(utrstat & S3C2410_UTRSTAT_TIMEOUT)) { s3c64xx_start_rx_dma(ourport); @@ -752,7 +752,7 @@ static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id) wr_regl(port, S3C2410_UTRSTAT, S3C2410_UTRSTAT_TIMEOUT); finish: - spin_unlock(&port->lock); + uart_port_unlock(port); return IRQ_HANDLED; } @@ -849,9 +849,9 @@ static irqreturn_t s3c24xx_serial_rx_chars_pio(void *dev_id) struct s3c24xx_uart_port *ourport = dev_id; struct uart_port *port = &ourport->port; - spin_lock(&port->lock); + uart_port_lock(port); s3c24xx_serial_rx_drain_fifo(ourport); - spin_unlock(&port->lock); + uart_port_unlock(port); return IRQ_HANDLED; } @@ -933,11 +933,11 @@ static irqreturn_t s3c24xx_serial_tx_irq(int irq, void *id) struct s3c24xx_uart_port *ourport = id; struct uart_port *port = &ourport->port; - spin_lock(&port->lock); + uart_port_lock(port); s3c24xx_serial_tx_chars(ourport); - spin_unlock(&port->lock); + uart_port_unlock(port); return IRQ_HANDLED; } @@ -1025,7 +1025,7 @@ static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state) unsigned long flags; unsigned int ucon; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); ucon = rd_regl(port, S3C2410_UCON); @@ -1036,7 +1036,7 @@ static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state) wr_regl(port, S3C2410_UCON, ucon); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p) @@ -1295,7 +1295,7 @@ static int s3c64xx_serial_startup(struct uart_port *port) ourport->rx_enabled = 1; ourport->tx_enabled = 0; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); ufcon = rd_regl(port, S3C2410_UFCON); ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8; @@ -1305,7 +1305,7 @@ static int s3c64xx_serial_startup(struct uart_port *port) enable_rx_pio(ourport); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); /* Enable Rx Interrupt */ s3c24xx_clear_bit(port, S3C64XX_UINTM_RXD, S3C64XX_UINTM); @@ -1333,7 +1333,7 @@ static int apple_s5l_serial_startup(struct uart_port *port) ourport->rx_enabled = 1; ourport->tx_enabled = 0; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); ufcon = rd_regl(port, S3C2410_UFCON); ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8; @@ -1343,7 +1343,7 @@ static int apple_s5l_serial_startup(struct uart_port *port) enable_rx_pio(ourport); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); /* Enable Rx Interrupt */ s3c24xx_set_bit(port, APPLE_S5L_UCON_RXTHRESH_ENA, S3C2410_UCON); @@ -1644,7 +1644,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, ulcon |= S3C2410_LCON_PNONE; } - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); dev_dbg(port->dev, "setting ulcon to %08x, brddiv to %d, udivslot %08x\n", @@ -1702,7 +1702,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, if ((termios->c_cflag & CREAD) == 0) port->ignore_status_mask |= RXSTAT_DUMMY_READ; - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } static const char *s3c24xx_serial_type(struct uart_port *port) -- 2.53.0 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 5.15.y 2/3] tty: serial: samsung: use u32 for register interactions 2026-06-05 18:31 ` [PATCH 5.15.y 1/3] serial: samsung_tty: Use port lock wrappers Sasha Levin @ 2026-06-05 18:31 ` Sasha Levin 2026-06-05 18:31 ` [PATCH 5.15.y 3/3] tty: serial: samsung: Remove redundant port lock acquisition in rx helpers Sasha Levin 1 sibling, 0 replies; 4+ messages in thread From: Sasha Levin @ 2026-06-05 18:31 UTC (permalink / raw) To: stable; +Cc: Tudor Ambarus, Sam Protsenko, Greg Kroah-Hartman, Sasha Levin From: Tudor Ambarus <tudor.ambarus@linaro.org> [ Upstream commit 032a725c16add79332d774348d7ad7d0d4b86479 ] All registers of the IP have 32 bits. Use u32 variables when reading or writing from/to the registers. The purpose of those variables becomes clearer. Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240119104526.1221243-9-tudor.ambarus@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: a3bb136bff5e ("tty: serial: samsung: Remove redundant port lock acquisition in rx helpers") Signed-off-by: Sasha Levin <sashal@kernel.org> --- drivers/tty/serial/samsung_tty.c | 44 +++++++++++++++----------------- 1 file changed, 21 insertions(+), 23 deletions(-) diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c index 5f05336b448599..e83e39ea176a67 100644 --- a/drivers/tty/serial/samsung_tty.c +++ b/drivers/tty/serial/samsung_tty.c @@ -243,8 +243,8 @@ static void s3c24xx_serial_rx_enable(struct uart_port *port) { struct s3c24xx_uart_port *ourport = to_ourport(port); unsigned long flags; - unsigned int ucon, ufcon; int count = 10000; + u32 ucon, ufcon; uart_port_lock_irqsave(port, &flags); @@ -267,7 +267,7 @@ static void s3c24xx_serial_rx_disable(struct uart_port *port) { struct s3c24xx_uart_port *ourport = to_ourport(port); unsigned long flags; - unsigned int ucon; + u32 ucon; uart_port_lock_irqsave(port, &flags); @@ -664,7 +664,7 @@ static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport) static void enable_rx_dma(struct s3c24xx_uart_port *ourport) { struct uart_port *port = &ourport->port; - unsigned int ucon; + u32 ucon; /* set Rx mode to DMA mode */ ucon = rd_regl(port, S3C2410_UCON); @@ -687,7 +687,7 @@ static void enable_rx_dma(struct s3c24xx_uart_port *ourport) static void enable_rx_pio(struct s3c24xx_uart_port *ourport) { struct uart_port *port = &ourport->port; - unsigned int ucon; + u32 ucon; /* set Rx mode to DMA mode */ ucon = rd_regl(port, S3C2410_UCON); @@ -712,13 +712,14 @@ static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport); static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id) { - unsigned int utrstat, received; struct s3c24xx_uart_port *ourport = dev_id; struct uart_port *port = &ourport->port; struct s3c24xx_uart_dma *dma = ourport->dma; struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port); struct tty_port *t = &port->state->port; struct dma_tx_state state; + unsigned int received; + u32 utrstat; utrstat = rd_regl(port, S3C2410_UTRSTAT); rd_regl(port, S3C2410_UFSTAT); @@ -1000,7 +1001,7 @@ static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port) /* no modem control lines */ static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port) { - unsigned int umstat = rd_reg(port, S3C2410_UMSTAT); + u32 umstat = rd_reg(port, S3C2410_UMSTAT); if (umstat & S3C2410_UMSTAT_CTS) return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; @@ -1023,7 +1024,7 @@ static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state) { unsigned long flags; - unsigned int ucon; + u32 ucon; uart_port_lock_irqsave(port, &flags); @@ -1204,7 +1205,7 @@ static void apple_s5l_serial_shutdown(struct uart_port *port) { struct s3c24xx_uart_port *ourport = to_ourport(port); - unsigned int ucon; + u32 ucon; ucon = rd_regl(port, S3C2410_UCON); ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK | @@ -1272,7 +1273,7 @@ static int s3c64xx_serial_startup(struct uart_port *port) { struct s3c24xx_uart_port *ourport = to_ourport(port); unsigned long flags; - unsigned int ufcon; + u32 ufcon; int ret; wr_regl(port, S3C64XX_UINTM, 0xf); @@ -1317,7 +1318,7 @@ static int apple_s5l_serial_startup(struct uart_port *port) { struct s3c24xx_uart_port *ourport = to_ourport(port); unsigned long flags; - unsigned int ufcon; + u32 ufcon; int ret; wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS); @@ -1559,9 +1560,8 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, struct clk *clk = ERR_PTR(-EINVAL); unsigned long flags; unsigned int baud, quot, clk_sel = 0; - unsigned int ulcon; - unsigned int umcon; unsigned int udivslot = 0; + u32 ulcon, umcon; /* * We don't support modem control lines. @@ -2147,7 +2147,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, wr_regl(port, S3C64XX_UINTSP, 0xf); break; case TYPE_APPLE_S5L: { - unsigned int ucon; + u32 ucon; ucon = rd_regl(port, S3C2410_UCON); ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK | @@ -2366,7 +2366,7 @@ static int s3c24xx_serial_resume_noirq(struct device *dev) /* restore IRQ mask */ switch (ourport->info->type) { case TYPE_S3C6400: { - unsigned int uintm = 0xf; + u32 uintm = 0xf; if (ourport->tx_enabled) uintm &= ~S3C64XX_UINTM_TXD_MSK; @@ -2382,7 +2382,7 @@ static int s3c24xx_serial_resume_noirq(struct device *dev) break; } case TYPE_APPLE_S5L: { - unsigned int ucon; + u32 ucon; int ret; ret = clk_prepare_enable(ourport->clk); @@ -2445,7 +2445,7 @@ static const struct dev_pm_ops s3c24xx_serial_pm_ops = { static struct uart_port *cons_uart; static int -s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) +s3c24xx_serial_console_txrdy(struct uart_port *port, u32 ufcon) { struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); unsigned long ufstat, utrstat; @@ -2464,7 +2464,7 @@ s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) } static bool -s3c24xx_port_configured(unsigned int ucon) +s3c24xx_port_configured(u32 ucon) { /* consider the serial port configured if the tx/rx mode set */ return (ucon & 0xf) != 0; @@ -2491,8 +2491,8 @@ static int s3c24xx_serial_get_poll_char(struct uart_port *port) static void s3c24xx_serial_put_poll_char(struct uart_port *port, unsigned char c) { - unsigned int ufcon = rd_regl(port, S3C2410_UFCON); - unsigned int ucon = rd_regl(port, S3C2410_UCON); + u32 ufcon = rd_regl(port, S3C2410_UFCON); + u32 ucon = rd_regl(port, S3C2410_UCON); /* not possible to xmit on unconfigured port */ if (!s3c24xx_port_configured(ucon)) @@ -2508,7 +2508,7 @@ static void s3c24xx_serial_put_poll_char(struct uart_port *port, static void s3c24xx_serial_console_putchar(struct uart_port *port, int ch) { - unsigned int ufcon = rd_regl(port, S3C2410_UFCON); + u32 ufcon = rd_regl(port, S3C2410_UFCON); while (!s3c24xx_serial_console_txrdy(port, ufcon)) cpu_relax(); @@ -2533,11 +2533,9 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud, int *parity, int *bits) { struct clk *clk; - unsigned int ulcon; - unsigned int ucon; - unsigned int ubrdiv; unsigned long rate; unsigned int clk_sel; + u32 ulcon, ucon, ubrdiv; char clk_name[MAX_CLK_NAME_LENGTH]; ulcon = rd_regl(port, S3C2410_ULCON); -- 2.53.0 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 5.15.y 3/3] tty: serial: samsung: Remove redundant port lock acquisition in rx helpers 2026-06-05 18:31 ` [PATCH 5.15.y 1/3] serial: samsung_tty: Use port lock wrappers Sasha Levin 2026-06-05 18:31 ` [PATCH 5.15.y 2/3] tty: serial: samsung: use u32 for register interactions Sasha Levin @ 2026-06-05 18:31 ` Sasha Levin 1 sibling, 0 replies; 4+ messages in thread From: Sasha Levin @ 2026-06-05 18:31 UTC (permalink / raw) To: stable; +Cc: Tudor Ambarus, stable, John Ogness, Greg Kroah-Hartman, Sasha Levin From: Tudor Ambarus <tudor.ambarus@linaro.org> [ Upstream commit a3bb136bff5e6a5e48cdd813246c9c4686feaaa9 ] Sashiko identified a deadlock when the console flow is engaged [1]. When console flow control is enabled (UPF_CONS_FLOW), s3c24xx_serial_stop_tx() calls s3c24xx_serial_rx_enable() and s3c24xx_serial_start_tx() calls s3c24xx_serial_rx_disable(). The serial core framework invokes the .stop_tx() and .start_tx() callbacks with the port->lock spinlock already held. Furthermore, all internal driver paths that invoke stop_tx (such as the DMA TX completion handler s3c24xx_serial_tx_dma_complete() or the PIO TX IRQ handler s3c24xx_serial_tx_irq()) also acquire port->lock prior to calling it. (Note that s3c24xx_serial_start_tx() is only invoked by the serial core). However, s3c24xx_serial_rx_enable() and s3c24xx_serial_rx_disable() unconditionally attempt to acquire port->lock again using uart_port_lock_irqsave(). Since spinlocks are not recursive, this causes a deadlock on the same CPU when console flow control is engaged. Remove the redundant lock acquisition from both rx helper functions. Cc: stable <stable@kernel.org> Fixes: b497549a035c ("[ARM] S3C24XX: Split serial driver into core and per-cpu drivers") Reported-by: John Ogness <john.ogness@linutronix.de> Closes: https://sashiko.dev/#/patchset/20260506121606.5805-1-john.ogness%40linutronix.de [1] Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://patch.msgid.link/20260515-samsung-tty-flow-control-deadlock-v1-1-93255edbc9bc@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> --- drivers/tty/serial/samsung_tty.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c index e83e39ea176a67..1d8f5d3f440b8d 100644 --- a/drivers/tty/serial/samsung_tty.c +++ b/drivers/tty/serial/samsung_tty.c @@ -242,12 +242,9 @@ static int s3c24xx_serial_txempty_nofifo(struct uart_port *port) static void s3c24xx_serial_rx_enable(struct uart_port *port) { struct s3c24xx_uart_port *ourport = to_ourport(port); - unsigned long flags; int count = 10000; u32 ucon, ufcon; - uart_port_lock_irqsave(port, &flags); - while (--count && !s3c24xx_serial_txempty_nofifo(port)) udelay(100); @@ -260,23 +257,18 @@ static void s3c24xx_serial_rx_enable(struct uart_port *port) wr_regl(port, S3C2410_UCON, ucon); ourport->rx_enabled = 1; - uart_port_unlock_irqrestore(port, flags); } static void s3c24xx_serial_rx_disable(struct uart_port *port) { struct s3c24xx_uart_port *ourport = to_ourport(port); - unsigned long flags; u32 ucon; - uart_port_lock_irqsave(port, &flags); - ucon = rd_regl(port, S3C2410_UCON); ucon &= ~S3C2410_UCON_RXIRQMODE; wr_regl(port, S3C2410_UCON, ucon); ourport->rx_enabled = 0; - uart_port_unlock_irqrestore(port, flags); } static void s3c24xx_serial_stop_tx(struct uart_port *port) -- 2.53.0 ^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2026-06-05 18:31 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2026-06-04 10:41 FAILED: patch "[PATCH] tty: serial: samsung: Remove redundant port lock acquisition" failed to apply to 5.15-stable tree gregkh 2026-06-05 18:31 ` [PATCH 5.15.y 1/3] serial: samsung_tty: Use port lock wrappers Sasha Levin 2026-06-05 18:31 ` [PATCH 5.15.y 2/3] tty: serial: samsung: use u32 for register interactions Sasha Levin 2026-06-05 18:31 ` [PATCH 5.15.y 3/3] tty: serial: samsung: Remove redundant port lock acquisition in rx helpers Sasha Levin
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox