FAILED: patch "[PATCH] Bluetooth: btusb: fix wakeup source leak on probe failure" failed to apply to 5.10-stable tree

FAILED: patch "[PATCH] Bluetooth: btusb: fix wakeup source leak on probe failure" failed to apply to 5.10-stable tree

[gregkh]

The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 3d93e1bb0fb881fe3ef961d1120556658e9cac4d
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026071341-glamorous-shower-90f7@gregkh' --subject-prefix 'PATCH 5.10.y' 'HEAD^..'

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 3d93e1bb0fb881fe3ef961d1120556658e9cac4d Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Thu, 4 Jun 2026 08:37:38 +0200
Subject: [PATCH] Bluetooth: btusb: fix wakeup source leak on probe failure

Make sure to disable wakeup on probe failure to avoid leaking the wakeup
source.

Fixes: fd913ef7ce61 ("Bluetooth: btusb: Add out-of-band wakeup support")
Cc: stable@vger.kernel.org	# 4.11
Cc: Rajat Jain <rajatja@google.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 669fb3ebde4c..966e017ac1df 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3013,6 +3013,11 @@ static int marvell_config_oob_wake(struct hci_dev *hdev)
 
 	return 0;
 }
+#else
+static inline int marvell_config_oob_wake(struct hci_dev *hdev)
+{
+	return 0;
+}
 #endif
 
 static int btusb_set_bdaddr_marvell(struct hci_dev *hdev,
@@ -3855,6 +3860,11 @@ static int btusb_config_oob_wake(struct hci_dev *hdev)
 	bt_dev_info(hdev, "OOB Wake-on-BT configured at IRQ %u", irq);
 	return 0;
 }
+#else
+static inline int btusb_config_oob_wake(struct hci_dev *hdev)
+{
+	return 0;
+}
 #endif
 
 static void btusb_check_needs_reset_resume(struct usb_interface *intf)
@@ -4191,7 +4201,6 @@ static int btusb_probe(struct usb_interface *intf,
 	hdev->wakeup  = btusb_wakeup;
 	hdev->hci_drv = &btusb_hci_drv;
 
-#ifdef CONFIG_PM
 	err = btusb_config_oob_wake(hdev);
 	if (err)
 		goto out_free_dev;
@@ -4200,9 +4209,9 @@ static int btusb_probe(struct usb_interface *intf,
 	if (id->driver_info & BTUSB_MARVELL && data->oob_wake_irq) {
 		err = marvell_config_oob_wake(hdev);
 		if (err)
-			goto out_free_dev;
+			goto err_disable_wakeup;
 	}
-#endif
+
 	if (id->driver_info & BTUSB_CW6622)
 		hci_set_quirk(hdev, HCI_QUIRK_BROKEN_STORED_LINK_KEY);
 
@@ -4447,6 +4456,9 @@ static int btusb_probe(struct usb_interface *intf,
 	}
 err_kill_tx_urbs:
 	usb_kill_anchored_urbs(&data->tx_anchor);
+err_disable_wakeup:
+	if (data->oob_wake_irq)
+		device_init_wakeup(&data->udev->dev, false);
 out_free_dev:
 	if (data->reset_gpio)
 		gpiod_put(data->reset_gpio);

[PATCH 5.10.y 1/5] Bluetooth: btintel: Fix offset calculation boot address parameter

[Sasha Levin]

From: Kiran K <kiran.k@intel.com>

[ Upstream commit d00745da644d42c2f97293eb3fe19cfd5c0b073c ]

Boot address parameter was not getting updated properly
due to wrong offset

Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Stable-dep-of: 3d93e1bb0fb8 ("Bluetooth: btusb: fix wakeup source leak on probe failure")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btintel.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 2538bdee31d8ab..a7efbadc3d146e 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -863,7 +863,8 @@ static int btintel_download_firmware_payload(struct hci_dev *hdev,
 			/* The boot parameter is the first 32-bit value
 			 * and rest of 3 octets are reserved.
 			 */
-			*boot_param = get_unaligned_le32(fw_ptr + sizeof(*cmd));
+			*boot_param = get_unaligned_le32(fw_ptr + frag_len +
+							 sizeof(*cmd));
 
 			bt_dev_dbg(hdev, "boot_param=0x%x", *boot_param);
 		}
-- 
2.53.0

[PATCH 5.10.y 2/5] Bluetooth: btintel: Check firmware version before download

[Sasha Levin]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit ac0565462e330a2b762ca5849a4140b29d725786 ]

This checks the firmware build number, week and year against the
repective loaded version. If details are a match, skip the download
process.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Stable-dep-of: 3d93e1bb0fb8 ("Bluetooth: btusb: fix wakeup source leak on probe failure")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btintel.c   | 106 +++++++++++++++++++++++++++-------
 drivers/bluetooth/btintel.h   |   5 +-
 drivers/bluetooth/btusb.c     |   9 ++-
 drivers/bluetooth/hci_intel.c |   7 ++-
 4 files changed, 101 insertions(+), 26 deletions(-)

diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index a7efbadc3d146e..8312c55abcc24a 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -24,6 +24,14 @@
 #define ECDSA_OFFSET		644
 #define ECDSA_HEADER_LEN	320
 
+#define CMD_WRITE_BOOT_PARAMS	0xfc0e
+struct cmd_write_boot_params {
+	u32 boot_addr;
+	u8  fw_build_num;
+	u8  fw_build_ww;
+	u8  fw_build_yy;
+} __packed;
+
 int btintel_check_bdaddr(struct hci_dev *hdev)
 {
 	struct hci_rp_read_bd_addr *bda;
@@ -841,7 +849,7 @@ static int btintel_sfi_ecdsa_header_secure_send(struct hci_dev *hdev,
 
 static int btintel_download_firmware_payload(struct hci_dev *hdev,
 					     const struct firmware *fw,
-					     u32 *boot_param, size_t offset)
+					     size_t offset)
 {
 	int err;
 	const u8 *fw_ptr;
@@ -854,21 +862,6 @@ static int btintel_download_firmware_payload(struct hci_dev *hdev,
 	while (fw_ptr - fw->data < fw->size) {
 		struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
 
-		/* Each SKU has a different reset parameter to use in the
-		 * HCI_Intel_Reset command and it is embedded in the firmware
-		 * data. So, instead of using static value per SKU, check
-		 * the firmware data and save it for later use.
-		 */
-		if (le16_to_cpu(cmd->opcode) == 0xfc0e) {
-			/* The boot parameter is the first 32-bit value
-			 * and rest of 3 octets are reserved.
-			 */
-			*boot_param = get_unaligned_le32(fw_ptr + frag_len +
-							 sizeof(*cmd));
-
-			bt_dev_dbg(hdev, "boot_param=0x%x", *boot_param);
-		}
-
 		frag_len += sizeof(*cmd) + cmd->plen;
 
 		/* The parameter length of the secure send command requires
@@ -897,28 +890,101 @@ static int btintel_download_firmware_payload(struct hci_dev *hdev,
 	return err;
 }
 
+static bool btintel_firmware_version(struct hci_dev *hdev,
+				     u8 num, u8 ww, u8 yy,
+				     const struct firmware *fw,
+				     u32 *boot_addr)
+{
+	const u8 *fw_ptr;
+
+	fw_ptr = fw->data;
+
+	while (fw_ptr - fw->data < fw->size) {
+		struct hci_command_hdr *cmd = (void *)(fw_ptr);
+
+		/* Each SKU has a different reset parameter to use in the
+		 * HCI_Intel_Reset command and it is embedded in the firmware
+		 * data. So, instead of using static value per SKU, check
+		 * the firmware data and save it for later use.
+		 */
+		if (le16_to_cpu(cmd->opcode) == CMD_WRITE_BOOT_PARAMS) {
+			struct cmd_write_boot_params *params;
+
+			params = (void *)(fw_ptr + sizeof(*cmd));
+
+			bt_dev_info(hdev, "Boot Address: 0x%x",
+				    le32_to_cpu(params->boot_addr));
+
+			bt_dev_info(hdev, "Firmware Version: %u-%u.%u",
+				    params->fw_build_num, params->fw_build_ww,
+				    params->fw_build_yy);
+
+			return (num == params->fw_build_num &&
+				ww == params->fw_build_ww &&
+				yy == params->fw_build_yy);
+		}
+
+		fw_ptr += sizeof(*cmd) + cmd->plen;
+	}
+
+	return false;
+}
+
 int btintel_download_firmware(struct hci_dev *hdev,
+			      struct intel_version *ver,
 			      const struct firmware *fw,
 			      u32 *boot_param)
 {
 	int err;
 
+	/* SfP and WsP don't seem to update the firmware version on file
+	 * so version checking is currently not possible.
+	 */
+	switch (ver->hw_variant) {
+	case 0x0b:	/* SfP */
+	case 0x0c:	/* WsP */
+		/* Skip version checking */
+		break;
+	default:
+		/* Skip download if firmware has the same version */
+		if (btintel_firmware_version(hdev, ver->fw_build_num,
+					     ver->fw_build_ww, ver->fw_build_yy,
+					     fw, boot_param)) {
+			bt_dev_info(hdev, "Firmware already loaded");
+			/* Return -EALREADY to indicate that the firmware has
+			 * already been loaded.
+			 */
+			return -EALREADY;
+		}
+	}
+
 	err = btintel_sfi_rsa_header_secure_send(hdev, fw);
 	if (err)
 		return err;
 
-	return btintel_download_firmware_payload(hdev, fw, boot_param,
-						 RSA_HEADER_LEN);
+	return btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN);
 }
 EXPORT_SYMBOL_GPL(btintel_download_firmware);
 
 int btintel_download_firmware_newgen(struct hci_dev *hdev,
+				     struct intel_version_tlv *ver,
 				     const struct firmware *fw, u32 *boot_param,
 				     u8 hw_variant, u8 sbe_type)
 {
 	int err;
 	u32 css_header_ver;
 
+	/* Skip download if firmware has the same version */
+	if (btintel_firmware_version(hdev, ver->min_fw_build_nn,
+				     ver->min_fw_build_cw, ver->min_fw_build_yy,
+				     fw, boot_param)) {
+		bt_dev_info(hdev, "Firmware already loaded");
+		/* Return -EALREADY to indicate that firmware has already been
+		 * loaded.
+		 */
+		return -EALREADY;
+	}
+
 	/* iBT hardware variants 0x0b, 0x0c, 0x11, 0x12, 0x13, 0x14 support
 	 * only RSA secure boot engine. Hence, the corresponding sfi file will
 	 * have RSA header of 644 bytes followed by Command Buffer.
@@ -948,7 +1014,7 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
 		if (err)
 			return err;
 
-		err = btintel_download_firmware_payload(hdev, fw, boot_param, RSA_HEADER_LEN);
+		err = btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN);
 		if (err)
 			return err;
 	} else if (hw_variant >= 0x17) {
@@ -969,7 +1035,6 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
 				return err;
 
 			err = btintel_download_firmware_payload(hdev, fw,
-								boot_param,
 								RSA_HEADER_LEN + ECDSA_HEADER_LEN);
 			if (err)
 				return err;
@@ -979,7 +1044,6 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
 				return err;
 
 			err = btintel_download_firmware_payload(hdev, fw,
-								boot_param,
 								RSA_HEADER_LEN + ECDSA_HEADER_LEN);
 			if (err)
 				return err;
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index 78cc64b42b30a6..ca0eebba02b5cd 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -157,9 +157,10 @@ struct regmap *btintel_regmap_init(struct hci_dev *hdev, u16 opcode_read,
 int btintel_send_intel_reset(struct hci_dev *hdev, u32 boot_param);
 int btintel_read_boot_params(struct hci_dev *hdev,
 			     struct intel_boot_params *params);
-int btintel_download_firmware(struct hci_dev *dev, const struct firmware *fw,
-			      u32 *boot_param);
+int btintel_download_firmware(struct hci_dev *dev, struct intel_version *ver,
+			      const struct firmware *fw, u32 *boot_param);
 int btintel_download_firmware_newgen(struct hci_dev *hdev,
+				     struct intel_version_tlv *ver,
 				     const struct firmware *fw,
 				     u32 *boot_param, u8 hw_variant,
 				     u8 sbe_type);
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 17c85cd8a66e21..5b5ede26acea83 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2602,8 +2602,15 @@ static int btusb_intel_download_firmware(struct hci_dev *hdev,
 	set_bit(BTUSB_DOWNLOADING, &data->flags);
 
 	/* Start firmware downloading and get boot parameter */
-	err = btintel_download_firmware(hdev, fw, boot_param);
+	err = btintel_download_firmware(hdev, ver, fw, boot_param);
 	if (err < 0) {
+		if (err == -EALREADY) {
+			/* Firmware has already been loaded */
+			set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
+			err = 0;
+			goto done;
+		}
+
 		/* When FW download fails, send Intel Reset to retry
 		 * FW download.
 		 */
diff --git a/drivers/bluetooth/hci_intel.c b/drivers/bluetooth/hci_intel.c
index d5d2feef6c5216..78afb9a348e705 100644
--- a/drivers/bluetooth/hci_intel.c
+++ b/drivers/bluetooth/hci_intel.c
@@ -735,7 +735,7 @@ static int intel_setup(struct hci_uart *hu)
 	set_bit(STATE_DOWNLOADING, &intel->flags);
 
 	/* Start firmware downloading and get boot parameter */
-	err = btintel_download_firmware(hdev, fw, &boot_param);
+	err = btintel_download_firmware(hdev, &ver, fw, &boot_param);
 	if (err < 0)
 		goto done;
 
@@ -784,7 +784,10 @@ static int intel_setup(struct hci_uart *hu)
 done:
 	release_firmware(fw);
 
-	if (err < 0)
+	/* Check if there was an error and if is not -EALREADY which means the
+	 * firmware has already been loaded.
+	 */
+	if (err < 0 && err != -EALREADY)
 		return err;
 
 	/* We need to restore the default speed before Intel reset */
-- 
2.53.0

[PATCH 5.10.y 3/5] Bluetooth: btusb: fix use-after-free on registration failure

[Sasha Levin]

From: Johan Hovold <johan@kernel.org>

[ Upstream commit eedc6867ebad73edbfaf9a0a65fbef7115cc4753 ]

Make sure to release the sibling interfaces in case controller
registration fails to avoid use-after-free and double-free when they are
eventually disconnected.

This issue was reported by Sashiko while reviewing a fix for a wakeup
source leak in the btusb probe errors paths.

Link: https://sashiko.dev/#/patchset/20260402092704.2346710-1-johan%40kernel.org
Fixes: 9bfa35fe422c ("[Bluetooth] Add SCO support to btusb driver")
Fixes: 9d08f50401ac ("Bluetooth: btusb: Add support for Broadcom LM_DIAG interface")
Cc: stable@vger.kernel.org	# 2.6.27
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 3d93e1bb0fb8 ("Bluetooth: btusb: fix wakeup source leak on probe failure")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btusb.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 5b5ede26acea83..620dc80992b727 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -4376,12 +4376,21 @@ static int btusb_probe(struct usb_interface *intf,
 
 	err = hci_register_dev(hdev);
 	if (err < 0)
-		goto out_free_dev;
+		goto err_release_siblings;
 
 	usb_set_intfdata(intf, data);
 
 	return 0;
 
+err_release_siblings:
+	if (data->diag) {
+		usb_set_intfdata(data->diag, NULL);
+		usb_driver_release_interface(&btusb_driver, data->diag);
+	}
+	if (data->isoc) {
+		usb_set_intfdata(data->isoc, NULL);
+		usb_driver_release_interface(&btusb_driver, data->isoc);
+	}
 out_free_dev:
 	if (data->reset_gpio)
 		gpiod_put(data->reset_gpio);
-- 
2.53.0

[PATCH 5.10.y 4/5] Bluetooth: btusb: fix use-after-free on marvell probe failure

[Sasha Levin]

From: Johan Hovold <johan@kernel.org>

[ Upstream commit c5b600a3c05b1a7a110d558df935a8fc8a471c79 ]

Make sure to stop any TX URBs submitted during Marvell OOB wakeup
configuration on later probe failures to avoid use-after-free in the
completion callback.

This issue was reported by Sashiko while reviewing a fix for a wakeup
source leak in the btusb probe errors paths.

Link: https://sashiko.dev/#/patchset/20260402092704.2346710-1-johan%40kernel.org
Fixes: a4ccc9e33d2f ("Bluetooth: btusb: Configure Marvell to use one of the pins for oob wakeup")
Cc: stable@vger.kernel.org	# 4.11
Cc: Rajat Jain <rajatja@google.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 3d93e1bb0fb8 ("Bluetooth: btusb: fix wakeup source leak on probe failure")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btusb.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 620dc80992b727..6d32e48418da78 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -4352,7 +4352,7 @@ static int btusb_probe(struct usb_interface *intf,
 		err = usb_set_interface(data->udev, 0, 0);
 		if (err < 0) {
 			BT_ERR("failed to set interface 0, alt 0 %d", err);
-			goto out_free_dev;
+			goto err_kill_tx_urbs;
 		}
 	}
 
@@ -4360,7 +4360,7 @@ static int btusb_probe(struct usb_interface *intf,
 		err = usb_driver_claim_interface(&btusb_driver,
 						 data->isoc, data);
 		if (err < 0)
-			goto out_free_dev;
+			goto err_kill_tx_urbs;
 	}
 
 	if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) && data->diag) {
@@ -4391,6 +4391,8 @@ static int btusb_probe(struct usb_interface *intf,
 		usb_set_intfdata(data->isoc, NULL);
 		usb_driver_release_interface(&btusb_driver, data->isoc);
 	}
+err_kill_tx_urbs:
+	usb_kill_anchored_urbs(&data->tx_anchor);
 out_free_dev:
 	if (data->reset_gpio)
 		gpiod_put(data->reset_gpio);
-- 
2.53.0

[PATCH 5.10.y 5/5] Bluetooth: btusb: fix wakeup source leak on probe failure

[Sasha Levin]

From: Johan Hovold <johan@kernel.org>

[ Upstream commit 3d93e1bb0fb881fe3ef961d1120556658e9cac4d ]

Make sure to disable wakeup on probe failure to avoid leaking the wakeup
source.

Fixes: fd913ef7ce61 ("Bluetooth: btusb: Add out-of-band wakeup support")
Cc: stable@vger.kernel.org	# 4.11
Cc: Rajat Jain <rajatja@google.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btusb.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 6d32e48418da78..cb349276522e23 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3501,6 +3501,11 @@ static int marvell_config_oob_wake(struct hci_dev *hdev)
 
 	return 0;
 }
+#else
+static inline int marvell_config_oob_wake(struct hci_dev *hdev)
+{
+	return 0;
+}
 #endif
 
 static int btusb_set_bdaddr_marvell(struct hci_dev *hdev,
@@ -4011,6 +4016,11 @@ static int btusb_config_oob_wake(struct hci_dev *hdev)
 	bt_dev_info(hdev, "OOB Wake-on-BT configured at IRQ %u", irq);
 	return 0;
 }
+#else
+static inline int btusb_config_oob_wake(struct hci_dev *hdev)
+{
+	return 0;
+}
 #endif
 
 static void btusb_check_needs_reset_resume(struct usb_interface *intf)
@@ -4164,7 +4174,6 @@ static int btusb_probe(struct usb_interface *intf,
 	hdev->notify = btusb_notify;
 	hdev->prevent_wake = btusb_prevent_wake;
 
-#ifdef CONFIG_PM
 	err = btusb_config_oob_wake(hdev);
 	if (err)
 		goto out_free_dev;
@@ -4173,9 +4182,9 @@ static int btusb_probe(struct usb_interface *intf,
 	if (id->driver_info & BTUSB_MARVELL && data->oob_wake_irq) {
 		err = marvell_config_oob_wake(hdev);
 		if (err)
-			goto out_free_dev;
+			goto err_disable_wakeup;
 	}
-#endif
+
 	if (id->driver_info & BTUSB_CW6622)
 		set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
 
@@ -4393,6 +4402,9 @@ static int btusb_probe(struct usb_interface *intf,
 	}
 err_kill_tx_urbs:
 	usb_kill_anchored_urbs(&data->tx_anchor);
+err_disable_wakeup:
+	if (data->oob_wake_irq)
+		device_init_wakeup(&data->udev->dev, false);
 out_free_dev:
 	if (data->reset_gpio)
 		gpiod_put(data->reset_gpio);
-- 
2.53.0