FAILED: patch "[PATCH] remoteproc: xlnx: Check remote core state" failed to apply to 6.18-stable tree

FAILED: patch "[PATCH] remoteproc: xlnx: Check remote core state" failed to apply to 6.18-stable tree

[gregkh]

The patch below does not apply to the 6.18-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.18.y
git checkout FETCH_HEAD
git cherry-pick -x a48df51d23138388900995add2854cda4aa68e55
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026072001-fleshy-why-ba7d@gregkh' --subject-prefix 'PATCH 6.18.y' 'HEAD^..'

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From a48df51d23138388900995add2854cda4aa68e55 Mon Sep 17 00:00:00 2001
From: Tanmay Shah <tanmay.shah@amd.com>
Date: Tue, 28 Apr 2026 15:18:56 -0700
Subject: [PATCH] remoteproc: xlnx: Check remote core state

The remote state is set to RPROC_DETACHED if the resource table is found
in the memory. However, this can be wrong if the remote is not started,
but firmware is still loaded in the memory. Use PM_GET_NODE_STATUS call
to the firmware to request the state of the RPU node. If the RPU is
actually out of reset and running, only then move the remote state to
RPROC_DETACHED, otherwise keep the remote state to RPROC_OFFLINE.

Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Fixes: bca4b02ef92e ("remoteproc: xlnx: Add attach detach support")
Reviewed-by: Beleswar Padhi <b-padhi@ti.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20260428221855.313752-1-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index fbe8510f4927..af838b2dc327 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -1450,6 +1450,34 @@ int zynqmp_pm_get_node_status(const u32 node, u32 *const status,
 }
 EXPORT_SYMBOL_GPL(zynqmp_pm_get_node_status);
 
+/**
+ * zynqmp_pm_get_rpu_node_status - PM call to request a RPU node's current power state
+ * @node:		ID of the RPU component or sub-system in question
+ * @status:		Current operating state of the requested RPU node.
+ * @requirements:	Current requirements asserted on the RPU node.
+ * @usage:		Usage information, used for RPU slave nodes only:
+ *			PM_USAGE_NO_MASTER	- No master is currently using
+ *						  the node
+ *			PM_USAGE_CURRENT_MASTER	- Only requesting master is
+ *						  currently using the node
+ *			PM_USAGE_OTHER_MASTER	- Only other masters are
+ *						  currently using the node
+ *			PM_USAGE_BOTH_MASTERS	- Both the current and at least
+ *						  one other master is currently
+ *						  using the node
+ *
+ * Return:		Returns status, either success or error+reason
+ */
+int zynqmp_pm_get_rpu_node_status(const u32 node, u32 *const status,
+				  u32 *const requirements, u32 *const usage)
+{
+	if (zynqmp_pm_feature(PM_GET_NODE_STATUS) < PM_API_VERSION_2)
+		return -EOPNOTSUPP;
+
+	return zynqmp_pm_get_node_status(node, status, requirements, usage);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_get_rpu_node_status);
+
 /**
  * zynqmp_pm_force_pwrdwn - PM call to request for another PU or subsystem to
  *             be powered down forcefully
diff --git a/drivers/remoteproc/xlnx_r5_remoteproc.c b/drivers/remoteproc/xlnx_r5_remoteproc.c
index 50a9974f3202..45a62cb98072 100644
--- a/drivers/remoteproc/xlnx_r5_remoteproc.c
+++ b/drivers/remoteproc/xlnx_r5_remoteproc.c
@@ -948,16 +948,6 @@ static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev)
 		goto free_rproc;
 	}
 
-	/*
-	 * If firmware is already available in the memory then move rproc state
-	 * to DETACHED. Firmware can be preloaded via debugger or by any other
-	 * agent (processors) in the system.
-	 * If firmware isn't available in the memory and resource table isn't
-	 * found, then rproc state remains OFFLINE.
-	 */
-	if (!zynqmp_r5_get_rsc_table_va(r5_core))
-		r5_rproc->state = RPROC_DETACHED;
-
 	r5_core->rproc = r5_rproc;
 	return r5_core;
 
@@ -1210,6 +1200,7 @@ static int zynqmp_r5_core_init(struct zynqmp_r5_cluster *cluster,
 {
 	struct device *dev = cluster->dev;
 	struct zynqmp_r5_core *r5_core;
+	u32 req, usage, status;
 	int ret = -EINVAL, i;
 
 	r5_core = cluster->r5_cores[0];
@@ -1255,6 +1246,41 @@ static int zynqmp_r5_core_init(struct zynqmp_r5_cluster *cluster,
 		ret = zynqmp_r5_get_sram_banks(r5_core);
 		if (ret)
 			return ret;
+
+		/*
+		 * It is possible that firmware is loaded into the memory, but
+		 * RPU (remote) is not running. In such case, RPU state will be
+		 * moved to RPROC_DETACHED wrongfully. To avoid it first make
+		 * sure RPU is power-on and out of reset before parsing for the
+		 * resource table.
+		 */
+		ret = zynqmp_pm_get_rpu_node_status(r5_core->pm_domain_id,
+						    &status, &req, &usage);
+		if (ret) {
+			dev_warn(r5_core->dev,
+				 "failed to get rpu node status, err %d\n", ret);
+			continue;
+		}
+
+		/*
+		 * If RPU state is power on and out of reset i.e. running, then
+		 * assign RPROC_DETACHED state. If the RPU is not out of reset
+		 * then do not attempt to attach to the remote processor.
+		 */
+		if (status == PM_NODE_RUNNING) {
+			/*
+			 * Not all the firmware that is running on the remote
+			 * core is expected to have the resource table. The
+			 * firmware might not use RPMsg at all, and in that case
+			 * resource table becomes irrelevant. However, we still
+			 * need to make sure that running core is not reported
+			 * as offline. so do not decide remote core state based
+			 * on the resource table availability
+			 */
+			if (zynqmp_r5_get_rsc_table_va(r5_core))
+				dev_dbg(r5_core->dev, "rsc tbl not found\n");
+			r5_core->rproc->state = RPROC_DETACHED;
+		}
 	}
 
 	return 0;
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index d70dcd462b44..7e27b0f7bf7e 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -542,6 +542,18 @@ enum pm_gem_config_type {
 	GEM_CONFIG_FIXED = 2,
 };
 
+/**
+ * enum pm_node_status - Device node status provided by xilpm fw
+ * @PM_NODE_UNUSED: Device is not used
+ * @PM_NODE_RUNNING: Device is power-on and out of reset
+ * @PM_NODE_HALT: Device is power-on but in the reset state
+ */
+enum pm_node_status {
+	PM_NODE_UNUSED = 0,
+	PM_NODE_RUNNING = 1,
+	PM_NODE_HALT = 12,
+};
+
 /**
  * struct zynqmp_pm_query_data - PM query data
  * @qid:	query ID
@@ -630,6 +642,8 @@ int zynqmp_pm_set_rpu_mode(u32 node_id, enum rpu_oper_mode rpu_mode);
 int zynqmp_pm_set_tcm_config(u32 node_id, enum rpu_tcm_comb tcm_mode);
 int zynqmp_pm_get_node_status(const u32 node, u32 *const status,
 			      u32 *const requirements, u32 *const usage);
+int zynqmp_pm_get_rpu_node_status(const u32 node, u32 *const status,
+				  u32 *const requirements, u32 *const usage);
 int zynqmp_pm_set_sd_config(u32 node, enum pm_sd_config_type config, u32 value);
 int zynqmp_pm_set_gem_config(u32 node, enum pm_gem_config_type config,
 			     u32 value);
@@ -939,6 +953,13 @@ static inline int zynqmp_pm_get_node_status(const u32 node, u32 *const status,
 	return -ENODEV;
 }
 
+static inline int zynqmp_pm_get_rpu_node_status(const u32 node, u32 *const status,
+						u32 *const requirements,
+						u32 *const usage)
+{
+	return -ENODEV;
+}
+
 static inline int zynqmp_pm_set_sd_config(u32 node,
 					  enum pm_sd_config_type config,
 					  u32 value)

[PATCH 6.18.y] remoteproc: xlnx: Check remote core state

[Sasha Levin]

From: Tanmay Shah <tanmay.shah@amd.com>

[ Upstream commit a48df51d23138388900995add2854cda4aa68e55 ]

The remote state is set to RPROC_DETACHED if the resource table is found
in the memory. However, this can be wrong if the remote is not started,
but firmware is still loaded in the memory. Use PM_GET_NODE_STATUS call
to the firmware to request the state of the RPU node. If the RPU is
actually out of reset and running, only then move the remote state to
RPROC_DETACHED, otherwise keep the remote state to RPROC_OFFLINE.

Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Fixes: bca4b02ef92e ("remoteproc: xlnx: Add attach detach support")
Reviewed-by: Beleswar Padhi <b-padhi@ti.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20260428221855.313752-1-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
[ replaced the unavailable zynqmp_pm_get_node_status() helper with a direct zynqmp_pm_invoke_fn() call and exported it for modular builds. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/xilinx/zynqmp.c        |  1 +
 drivers/remoteproc/xlnx_r5_remoteproc.c | 50 ++++++++++++++++++++-----
 include/linux/firmware/xlnx-zynqmp.h    | 13 +++++++
 3 files changed, 54 insertions(+), 10 deletions(-)

diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 02da3e48bc8f35..dc9c5d32108d57 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -461,6 +461,7 @@ int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 *ret_payload, u32 num_args, ...)
 	return do_fw_call(ret_payload, 8, smc_arg[0], smc_arg[1], smc_arg[2], smc_arg[3],
 			  smc_arg[4], smc_arg[5], smc_arg[6], smc_arg[7]);
 }
+EXPORT_SYMBOL_GPL(zynqmp_pm_invoke_fn);
 
 static u32 pm_api_version;
 static u32 pm_tz_version;
diff --git a/drivers/remoteproc/xlnx_r5_remoteproc.c b/drivers/remoteproc/xlnx_r5_remoteproc.c
index 5ef586fd37bca3..a238b45bf2f2c6 100644
--- a/drivers/remoteproc/xlnx_r5_remoteproc.c
+++ b/drivers/remoteproc/xlnx_r5_remoteproc.c
@@ -959,16 +959,6 @@ static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev)
 		goto free_rproc;
 	}
 
-	/*
-	 * If firmware is already available in the memory then move rproc state
-	 * to DETACHED. Firmware can be preloaded via debugger or by any other
-	 * agent (processors) in the system.
-	 * If firmware isn't available in the memory and resource table isn't
-	 * found, then rproc state remains OFFLINE.
-	 */
-	if (!zynqmp_r5_get_rsc_table_va(r5_core))
-		r5_rproc->state = RPROC_DETACHED;
-
 	r5_core->rproc = r5_rproc;
 	return r5_core;
 
@@ -1221,6 +1211,7 @@ static int zynqmp_r5_core_init(struct zynqmp_r5_cluster *cluster,
 {
 	struct device *dev = cluster->dev;
 	struct zynqmp_r5_core *r5_core;
+	u32 payload[PAYLOAD_ARG_CNT];
 	int ret = -EINVAL, i;
 
 	r5_core = cluster->r5_cores[0];
@@ -1266,6 +1257,45 @@ static int zynqmp_r5_core_init(struct zynqmp_r5_cluster *cluster,
 		ret = zynqmp_r5_get_sram_banks(r5_core);
 		if (ret)
 			return ret;
+
+		/*
+		 * It is possible that firmware is loaded into the memory, but
+		 * RPU (remote) is not running. In such case, RPU state will be
+		 * moved to RPROC_DETACHED wrongfully. To avoid it first make
+		 * sure RPU is power-on and out of reset before parsing for the
+		 * resource table.
+		 */
+		ret = zynqmp_pm_feature(PM_GET_NODE_STATUS);
+		if (ret < PM_API_VERSION_2)
+			ret = -EOPNOTSUPP;
+		else
+			ret = zynqmp_pm_invoke_fn(PM_GET_NODE_STATUS, payload, 1,
+						  r5_core->pm_domain_id);
+		if (ret) {
+			dev_warn(r5_core->dev,
+				 "failed to get rpu node status, err %d\n", ret);
+			continue;
+		}
+
+		/*
+		 * If RPU state is power on and out of reset i.e. running, then
+		 * assign RPROC_DETACHED state. If the RPU is not out of reset
+		 * then do not attempt to attach to the remote processor.
+		 */
+		if (payload[1] == PM_NODE_RUNNING) {
+			/*
+			 * Not all the firmware that is running on the remote
+			 * core is expected to have the resource table. The
+			 * firmware might not use RPMsg at all, and in that case
+			 * resource table becomes irrelevant. However, we still
+			 * need to make sure that running core is not reported
+			 * as offline. so do not decide remote core state based
+			 * on the resource table availability
+			 */
+			if (zynqmp_r5_get_rsc_table_va(r5_core))
+				dev_dbg(r5_core->dev, "rsc tbl not found\n");
+			r5_core->rproc->state = RPROC_DETACHED;
+		}
 	}
 
 	return 0;
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index ae48d619c4e0ac..2f1c71f0cea76c 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -164,6 +164,7 @@ enum pm_api_cb_id {
 enum pm_api_id {
 	PM_API_FEATURES = 0,
 	PM_GET_API_VERSION = 1,
+	PM_GET_NODE_STATUS = 3,
 	PM_REGISTER_NOTIFIER = 5,
 	PM_FORCE_POWERDOWN = 8,
 	PM_REQUEST_WAKEUP = 10,
@@ -544,6 +545,18 @@ enum pm_gem_config_type {
 	GEM_CONFIG_FIXED = 2,
 };
 
+/**
+ * enum pm_node_status - Device node status provided by xilpm fw
+ * @PM_NODE_UNUSED: Device is not used
+ * @PM_NODE_RUNNING: Device is power-on and out of reset
+ * @PM_NODE_HALT: Device is power-on but in the reset state
+ */
+enum pm_node_status {
+	PM_NODE_UNUSED = 0,
+	PM_NODE_RUNNING = 1,
+	PM_NODE_HALT = 12,
+};
+
 /**
  * struct zynqmp_pm_query_data - PM query data
  * @qid:	query ID
-- 
2.53.0