FAILED: patch "[PATCH] i2c: imx: fix locked bus on SMBus block-read of 0 (atomic)" failed to apply to 6.1-stable tree

FAILED: patch "[PATCH] i2c: imx: fix locked bus on SMBus block-read of 0 (atomic)" failed to apply to 6.1-stable tree

[gregkh]

The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x cb2fc37857693b55909fb77dc2c87cfbc1cdc476
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026072036-sanitizer-aloe-66ef@gregkh' --subject-prefix 'PATCH 6.1.y' 'HEAD^..'

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From cb2fc37857693b55909fb77dc2c87cfbc1cdc476 Mon Sep 17 00:00:00 2001
From: Vincent Jardin <vjardin@free.fr>
Date: Mon, 13 Jul 2026 20:11:59 +0200
Subject: [PATCH] i2c: imx: fix locked bus on SMBus block-read of 0 (atomic)

SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic
(polling) path rejects it as -EPROTO. Worse, it returns without a
NACK+STOP: the next receive cycle has already started, so the target
keeps holding SDA and the bus stays stuck until a power cycle for
this i2c controller.

Reading I2DR to obtain the count likewise arms the next byte on the
count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly
and left the bus held.

Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->len so
the existing last-byte handling emits STOP; the dummy byte is discarded.
A count of 0 is a valid empty block read; a count above
I2C_SMBUS_BLOCK_MAX is still reported as -EPROTO, but only after the bus
has been released.

The interrupt-driven path has the same flaw from a later commit and is
fixed separately, as it carries a different Fixes: tag and stable range.

Fixes: 8e8782c71595 ("i2c: imx: add SMBus block read support")
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Cc: <stable@vger.kernel.org> # v3.16+
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Stefan Eichenberger <eichest@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260713-for-upstream-i2c-lx2160-fix-v1-v3-1-073ac9e103a5@free.fr

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 28313d0fad37..cfd1e63359e7 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -1415,6 +1415,7 @@ static int i2c_imx_atomic_read(struct imx_i2c_struct *i2c_imx,
 	int i, result;
 	unsigned int temp;
 	int block_data = msgs->flags & I2C_M_RECV_LEN;
+	int block_err = 0;
 
 	result = i2c_imx_prepare_read(i2c_imx, msgs, false);
 	if (result)
@@ -1436,8 +1437,20 @@ static int i2c_imx_atomic_read(struct imx_i2c_struct *i2c_imx,
 		 */
 		if ((!i) && block_data) {
 			len = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
-			if ((len == 0) || (len > I2C_SMBUS_BLOCK_MAX))
-				return -EPROTO;
+			if ((len == 0) || (len > I2C_SMBUS_BLOCK_MAX)) {
+				/*
+				 * SMBus 3.1 6.5.7: support count byte of 0.
+				 * I2C_SMBUS_BLOCK_MAX case should not hold the SDA either.
+				 */
+				if (len > I2C_SMBUS_BLOCK_MAX)
+					block_err = -EPROTO;
+				temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+				temp |= I2CR_TXAK;
+				imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+				msgs->buf[0] = 0;
+				msgs->len = 2;
+				continue;
+			}
 			dev_dbg(&i2c_imx->adapter.dev,
 				"<%s> read length: 0x%X\n",
 				__func__, len);
@@ -1485,7 +1498,7 @@ static int i2c_imx_atomic_read(struct imx_i2c_struct *i2c_imx,
 			"<%s> read byte: B%d=0x%X\n",
 			__func__, i, msgs->buf[i]);
 	}
-	return 0;
+	return block_err;
 }
 
 static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs,

[PATCH 6.1.y 1/2] i2c: imx: separate atomic, dma and non-dma use case

[Sasha Levin]

From: Stefan Eichenberger <stefan.eichenberger@toradex.com>

[ Upstream commit b460b15b3cc23ef3639cc51043bf8b2a70ca1878 ]

Separate the atomic, dma and non-dma use case as a preparation step for
moving the non-dma use case to the isr to avoid rescheduling while a
transfer is in progress.

Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Stable-dep-of: cb2fc3785769 ("i2c: imx: fix locked bus on SMBus block-read of 0 (atomic)")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-imx.c | 107 +++++++++++++++++++++++------------
 1 file changed, 70 insertions(+), 37 deletions(-)

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 76d5b80abfc700..bcd3cb48902b54 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -1012,6 +1012,43 @@ static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx,
 	return i2c_imx_acked(i2c_imx);
 }
 
+static int i2c_imx_prepare_read(struct imx_i2c_struct *i2c_imx,
+				struct i2c_msg *msgs, bool atomic,
+				bool use_dma)
+{
+	int result;
+	unsigned int temp = 0;
+
+	/* write slave address */
+	imx_i2c_write_reg(i2c_8bit_addr_from_msg(msgs), i2c_imx, IMX_I2C_I2DR);
+	result = i2c_imx_trx_complete(i2c_imx, atomic);
+	if (result)
+		return result;
+	result = i2c_imx_acked(i2c_imx);
+	if (result)
+		return result;
+
+	dev_dbg(&i2c_imx->adapter.dev, "<%s> setup bus\n", __func__);
+
+	/* setup bus to read data */
+	temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+	temp &= ~I2CR_MTX;
+
+	/*
+	 * Reset the I2CR_TXAK flag initially for SMBus block read since the
+	 * length is unknown
+	 */
+	if (msgs->len - 1)
+		temp &= ~I2CR_TXAK;
+	if (use_dma)
+		temp |= I2CR_DMAEN;
+
+	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+	imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); /* dummy read */
+
+	return 0;
+}
+
 static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx,
 			struct i2c_msg *msgs, bool is_lastmsg)
 {
@@ -1022,6 +1059,11 @@ static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx,
 	struct imx_i2c_dma *dma = i2c_imx->dma;
 	struct device *dev = &i2c_imx->adapter.dev;
 
+	result = i2c_imx_prepare_read(i2c_imx, msgs, false, true);
+	if (result)
+		return result;
+
+	dev_dbg(&i2c_imx->adapter.dev, "<%s> read data\n", __func__);
 
 	dma->chan_using = dma->chan_rx;
 	dma->dma_transfer_dir = DMA_DEV_TO_MEM;
@@ -1132,50 +1174,24 @@ static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs,
 	return 0;
 }
 
+static int i2c_imx_atomic_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
+{
+	return i2c_imx_write(i2c_imx, msgs, true);
+}
+
 static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs,
 			bool is_lastmsg, bool atomic)
 {
 	int i, result;
 	unsigned int temp;
 	int block_data = msgs->flags & I2C_M_RECV_LEN;
-	int use_dma = i2c_imx->dma && msgs->flags & I2C_M_DMA_SAFE &&
-		msgs->len >= DMA_THRESHOLD && !block_data;
 
-	dev_dbg(&i2c_imx->adapter.dev,
-		"<%s> write slave address: addr=0x%x\n",
-		__func__, i2c_8bit_addr_from_msg(msgs));
-
-	/* write slave address */
-	imx_i2c_write_reg(i2c_8bit_addr_from_msg(msgs), i2c_imx, IMX_I2C_I2DR);
-	result = i2c_imx_trx_complete(i2c_imx, atomic);
+	result = i2c_imx_prepare_read(i2c_imx, msgs, atomic, false);
 	if (result)
 		return result;
-	result = i2c_imx_acked(i2c_imx);
-	if (result)
-		return result;
-
-	dev_dbg(&i2c_imx->adapter.dev, "<%s> setup bus\n", __func__);
-
-	/* setup bus to read data */
-	temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
-	temp &= ~I2CR_MTX;
-
-	/*
-	 * Reset the I2CR_TXAK flag initially for SMBus block read since the
-	 * length is unknown
-	 */
-	if ((msgs->len - 1) || block_data)
-		temp &= ~I2CR_TXAK;
-	if (use_dma)
-		temp |= I2CR_DMAEN;
-	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
-	imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); /* dummy read */
 
 	dev_dbg(&i2c_imx->adapter.dev, "<%s> read data\n", __func__);
 
-	if (use_dma)
-		return i2c_imx_dma_read(i2c_imx, msgs, is_lastmsg);
-
 	/* read data */
 	for (i = 0; i < msgs->len; i++) {
 		u8 len = 0;
@@ -1242,6 +1258,12 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs,
 	return 0;
 }
 
+static int i2c_imx_atomic_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs,
+			       bool is_lastmsg)
+{
+	return i2c_imx_read(i2c_imx, msgs, is_lastmsg, true);
+}
+
 static int i2c_imx_xfer_common(struct i2c_adapter *adapter,
 			       struct i2c_msg *msgs, int num, bool atomic)
 {
@@ -1249,6 +1271,7 @@ static int i2c_imx_xfer_common(struct i2c_adapter *adapter,
 	int result;
 	bool is_lastmsg = false;
 	struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(adapter);
+	int use_dma = 0;
 
 	/* Start I2C transfer */
 	result = i2c_imx_start(i2c_imx, atomic);
@@ -1301,15 +1324,25 @@ static int i2c_imx_xfer_common(struct i2c_adapter *adapter,
 			(temp & I2SR_SRW ? 1 : 0), (temp & I2SR_IIF ? 1 : 0),
 			(temp & I2SR_RXAK ? 1 : 0));
 #endif
+
+		use_dma = i2c_imx->dma && msgs[i].len >= DMA_THRESHOLD &&
+			msgs[i].flags & I2C_M_DMA_SAFE;
 		if (msgs[i].flags & I2C_M_RD) {
-			result = i2c_imx_read(i2c_imx, &msgs[i], is_lastmsg, atomic);
+			int block_data = msgs->flags & I2C_M_RECV_LEN;
+
+			if (atomic)
+				result = i2c_imx_atomic_read(i2c_imx, &msgs[i], is_lastmsg);
+			else if (use_dma && !block_data)
+				result = i2c_imx_dma_read(i2c_imx, &msgs[i], is_lastmsg);
+			else
+				result = i2c_imx_read(i2c_imx, &msgs[i], is_lastmsg, false);
 		} else {
-			if (!atomic &&
-			    i2c_imx->dma && msgs[i].len >= DMA_THRESHOLD &&
-				msgs[i].flags & I2C_M_DMA_SAFE)
+			if (atomic)
+				result = i2c_imx_atomic_write(i2c_imx, &msgs[i]);
+			else if (use_dma)
 				result = i2c_imx_dma_write(i2c_imx, &msgs[i]);
 			else
-				result = i2c_imx_write(i2c_imx, &msgs[i], atomic);
+				result = i2c_imx_write(i2c_imx, &msgs[i], false);
 		}
 		if (result)
 			goto fail0;
-- 
2.53.0

[PATCH 6.1.y 2/2] i2c: imx: fix locked bus on SMBus block-read of 0 (atomic)

[Sasha Levin]

From: Vincent Jardin <vjardin@free.fr>

[ Upstream commit cb2fc37857693b55909fb77dc2c87cfbc1cdc476 ]

SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic
(polling) path rejects it as -EPROTO. Worse, it returns without a
NACK+STOP: the next receive cycle has already started, so the target
keeps holding SDA and the bus stays stuck until a power cycle for
this i2c controller.

Reading I2DR to obtain the count likewise arms the next byte on the
count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly
and left the bus held.

Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->len so
the existing last-byte handling emits STOP; the dummy byte is discarded.
A count of 0 is a valid empty block read; a count above
I2C_SMBUS_BLOCK_MAX is still reported as -EPROTO, but only after the bus
has been released.

The interrupt-driven path has the same flaw from a later commit and is
fixed separately, as it carries a different Fixes: tag and stable range.

Fixes: 8e8782c71595 ("i2c: imx: add SMBus block read support")
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Cc: <stable@vger.kernel.org> # v3.16+
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Stefan Eichenberger <eichest@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260713-for-upstream-i2c-lx2160-fix-v1-v3-1-073ac9e103a5@free.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-imx.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index bcd3cb48902b54..e45cd561b99ecb 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -1185,6 +1185,7 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs,
 	int i, result;
 	unsigned int temp;
 	int block_data = msgs->flags & I2C_M_RECV_LEN;
+	int block_err = 0;
 
 	result = i2c_imx_prepare_read(i2c_imx, msgs, atomic, false);
 	if (result)
@@ -1206,8 +1207,20 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs,
 		 */
 		if ((!i) && block_data) {
 			len = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
-			if ((len == 0) || (len > I2C_SMBUS_BLOCK_MAX))
-				return -EPROTO;
+			if ((len == 0) || (len > I2C_SMBUS_BLOCK_MAX)) {
+				/*
+				 * SMBus 3.1 6.5.7: support count byte of 0.
+				 * I2C_SMBUS_BLOCK_MAX case should not hold the SDA either.
+				 */
+				if (len > I2C_SMBUS_BLOCK_MAX)
+					block_err = -EPROTO;
+				temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+				temp |= I2CR_TXAK;
+				imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+				msgs->buf[0] = 0;
+				msgs->len = 2;
+				continue;
+			}
 			dev_dbg(&i2c_imx->adapter.dev,
 				"<%s> read length: 0x%X\n",
 				__func__, len);
@@ -1255,7 +1268,7 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs,
 			"<%s> read byte: B%d=0x%X\n",
 			__func__, i, msgs->buf[i]);
 	}
-	return 0;
+	return block_err;
 }
 
 static int i2c_imx_atomic_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs,
-- 
2.53.0