FAILED: patch "[PATCH] HID: nintendo: stop device IO before hid_hw_stop on probe" failed to apply to 6.6-stable tree

FAILED: patch "[PATCH] HID: nintendo: stop device IO before hid_hw_stop on probe" failed to apply to 6.6-stable tree

[gregkh]

The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 1f74d3bff6fe04a64e02ab3661d2e0d554565aa6
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026082537-drown-acquaint-6edf@gregkh' --subject-prefix 'PATCH 6.6.y' 'HEAD^..'

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 1f74d3bff6fe04a64e02ab3661d2e0d554565aa6 Mon Sep 17 00:00:00 2001
From: Jiangshan Yi <yijiangshan@kylinos.cn>
Date: Thu, 30 Jul 2026 11:19:27 +0800
Subject: [PATCH] HID: nintendo: stop device IO before hid_hw_stop on probe
 failure

nintendo_hid_probe() calls hid_device_io_start() before joycon_init()
and joycon_leds_create().  If either fails, the error path jumps to
err_close which calls hid_hw_close()/hid_hw_stop() without first calling
hid_device_io_stop().

hid_hw_stop() does not stop device IO, so hid_input_report() may still
run and access driver data that is being torn down, resulting in a
use-after-free.

Add an err_io_stop label that calls hid_device_io_stop() before
hid_hw_close(), and point the two post-io_start error paths at it.

Fixes: 2af16c1f846b ("HID: nintendo: add nintendo switch controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
index e7302ec01ff1..0db553528826 100644
--- a/drivers/hid/hid-nintendo.c
+++ b/drivers/hid/hid-nintendo.c
@@ -2736,14 +2736,14 @@ static int nintendo_hid_probe(struct hid_device *hdev,
 	ret = joycon_init(hdev);
 	if (ret) {
 		hid_err(hdev, "Failed to initialize controller; ret=%d\n", ret);
-		goto err_close;
+		goto err_io_stop;
 	}
 
 	/* Initialize the leds */
 	ret = joycon_leds_create(ctlr);
 	if (ret) {
 		hid_err(hdev, "Failed to create leds; ret=%d\n", ret);
-		goto err_close;
+		goto err_io_stop;
 	}
 
 	/* Initialize the battery power supply */
@@ -2766,7 +2766,8 @@ static int nintendo_hid_probe(struct hid_device *hdev,
 
 err_ida:
 	ida_free(&nintendo_player_id_allocator, ctlr->player_id);
-err_close:
+err_io_stop:
+	hid_device_io_stop(hdev);
 	hid_hw_close(hdev);
 err_stop:
 	hid_hw_stop(hdev);

[PATCH 6.6.y] HID: nintendo: stop device IO before hid_hw_stop on probe failure

[Sasha Levin]

From: Jiangshan Yi <yijiangshan@kylinos.cn>

[ Upstream commit 1f74d3bff6fe04a64e02ab3661d2e0d554565aa6 ]

nintendo_hid_probe() calls hid_device_io_start() before joycon_init()
and joycon_leds_create().  If either fails, the error path jumps to
err_close which calls hid_hw_close()/hid_hw_stop() without first calling
hid_device_io_stop().

hid_hw_stop() does not stop device IO, so hid_input_report() may still
run and access driver data that is being torn down, resulting in a
use-after-free.

Add an err_io_stop label that calls hid_device_io_stop() before
hid_hw_close(), and point the two post-io_start error paths at it.

Fixes: 2af16c1f846b ("HID: nintendo: add nintendo switch controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
[ dropped the absent `err_ida:`/`ida_free()` context and retargeted all five `goto err_close` paths to the new `err_io_stop` label ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-nintendo.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
index 4850e915a57d4..66331f1a86b69 100644
--- a/drivers/hid/hid-nintendo.c
+++ b/drivers/hid/hid-nintendo.c
@@ -2345,34 +2345,34 @@ static int nintendo_hid_probe(struct hid_device *hdev,
 	ret = joycon_init(hdev);
 	if (ret) {
 		hid_err(hdev, "Failed to initialize controller; ret=%d\n", ret);
-		goto err_close;
+		goto err_io_stop;
 	}
 
 	ret = joycon_read_info(ctlr);
 	if (ret) {
 		hid_err(hdev, "Failed to retrieve controller info; ret=%d\n",
 			ret);
-		goto err_close;
+		goto err_io_stop;
 	}
 
 	/* Initialize the leds */
 	ret = joycon_leds_create(ctlr);
 	if (ret) {
 		hid_err(hdev, "Failed to create leds; ret=%d\n", ret);
-		goto err_close;
+		goto err_io_stop;
 	}
 
 	/* Initialize the battery power supply */
 	ret = joycon_power_supply_create(ctlr);
 	if (ret) {
 		hid_err(hdev, "Failed to create power_supply; ret=%d\n", ret);
-		goto err_close;
+		goto err_io_stop;
 	}
 
 	ret = joycon_input_create(ctlr);
 	if (ret) {
 		hid_err(hdev, "Failed to create input device; ret=%d\n", ret);
-		goto err_close;
+		goto err_io_stop;
 	}
 
 	ctlr->ctlr_state = JOYCON_CTLR_STATE_READ;
@@ -2380,7 +2380,8 @@ static int nintendo_hid_probe(struct hid_device *hdev,
 	hid_dbg(hdev, "probe - success\n");
 	return 0;
 
-err_close:
+err_io_stop:
+	hid_device_io_stop(hdev);
 	hid_hw_close(hdev);
 err_stop:
 	hid_hw_stop(hdev);
-- 
2.53.0