* FAILED: patch "[PATCH] wifi: mt76: mt7996: bound the device EEPROM address before" failed to apply to 6.6-stable tree
@ 2026-09-04 4:49 gregkh
2026-09-10 2:11 ` [PATCH 6.6.y] wifi: mt76: mt7996: bound the device EEPROM address before the EFUSE copy Sasha Levin
0 siblings, 1 reply; 2+ messages in thread
From: gregkh @ 2026-09-04 4:49 UTC (permalink / raw)
To: hexlabsecurity, nbd; +Cc: stable
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 13b3c29a782033ce4a230be9e5618032813dbcd4
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026090415-flame-radiance-eb73@gregkh' --subject-prefix 'PATCH 6.6.y' 'HEAD^..'
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 13b3c29a782033ce4a230be9e5618032813dbcd4 Mon Sep 17 00:00:00 2001
From: Bryam Vargas <hexlabsecurity@proton.me>
Date: Thu, 25 Jun 2026 07:10:27 -0500
Subject: [PATCH] wifi: mt76: mt7996: bound the device EEPROM address before
the EFUSE copy
mt7996_mcu_get_eeprom() derives the destination of the EFUSE/EXT block
copy from the address reported by the MCU response (event->addr, a
device-controlled __le32) and clamps only the copy length, never the
destination offset into dev->mt76.eeprom.data. A malicious or
malfunctioning device can report an arbitrary address and drive an
out-of-bounds write of up to MT7996_EXT_EEPROM_BLOCK_SIZE bytes past
eeprom.data.
Reject a response whose address would place the copy outside eeprom.data
before deriving the destination pointer. Devices that echo the requested
in-bounds offset are unaffected.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260625-b4-disp-16f99062-v1-2-aee52ecf61b9@proton.me
Signed-off-by: Felix Fietkau <nbd@nbd.name>
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
index 2e83f4b79c87..a1bae5db8500 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
@@ -4352,11 +4352,18 @@ int mt7996_mcu_get_eeprom(struct mt7996_dev *dev, u32 offset, u8 *buf, u32 buf_l
event = (struct mt7996_mcu_eeprom_access_event *)skb->data;
if (event->valid) {
u32 ret_len = le32_to_cpu(event->eeprom.ext_eeprom.data_len);
+ u32 block = mode == EEPROM_MODE_EXT ? MT7996_EXT_EEPROM_BLOCK_SIZE :
+ MT7996_EEPROM_BLOCK_SIZE;
addr = le32_to_cpu(event->addr);
- if (!buf)
+ if (!buf) {
+ if (addr > dev->mt76.eeprom.size - block) {
+ dev_kfree_skb(skb);
+ return -EINVAL;
+ }
buf = (u8 *)dev->mt76.eeprom.data + addr;
+ }
switch (mode) {
case EEPROM_MODE_EFUSE:
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH 6.6.y] wifi: mt76: mt7996: bound the device EEPROM address before the EFUSE copy
2026-09-04 4:49 FAILED: patch "[PATCH] wifi: mt76: mt7996: bound the device EEPROM address before" failed to apply to 6.6-stable tree gregkh
@ 2026-09-10 2:11 ` Sasha Levin
0 siblings, 0 replies; 2+ messages in thread
From: Sasha Levin @ 2026-09-10 2:11 UTC (permalink / raw)
To: stable; +Cc: Bryam Vargas, Felix Fietkau, Sasha Levin
From: Bryam Vargas <hexlabsecurity@proton.me>
[ Upstream commit 13b3c29a782033ce4a230be9e5618032813dbcd4 ]
mt7996_mcu_get_eeprom() derives the destination of the EFUSE/EXT block
copy from the address reported by the MCU response (event->addr, a
device-controlled __le32) and clamps only the copy length, never the
destination offset into dev->mt76.eeprom.data. A malicious or
malfunctioning device can report an arbitrary address and drive an
out-of-bounds write of up to MT7996_EXT_EEPROM_BLOCK_SIZE bytes past
eeprom.data.
Reject a response whose address would place the copy outside eeprom.data
before deriving the destination pointer. Devices that echo the requested
in-bounds offset are unaffected.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260625-b4-disp-16f99062-v1-2-aee52ecf61b9@proton.me
Signed-off-by: Felix Fietkau <nbd@nbd.name>
[ adapted mt7996_mcu_get_eeprom() changes to the older fixed 16-byte EFUSE implementation. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7996/mcu.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
index 2abc8d15ea852..7c079de63c51d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
@@ -3107,7 +3107,13 @@ int mt7996_mcu_get_eeprom(struct mt7996_dev *dev, u32 offset)
valid = le32_to_cpu(*(__le32 *)(skb->data + 16));
if (valid) {
u32 addr = le32_to_cpu(*(__le32 *)(skb->data + 12));
- u8 *buf = (u8 *)dev->mt76.eeprom.data + addr;
+ u8 *buf;
+
+ if (addr > dev->mt76.eeprom.size - MT7996_EEPROM_BLOCK_SIZE) {
+ dev_kfree_skb(skb);
+ return -EINVAL;
+ }
+ buf = (u8 *)dev->mt76.eeprom.data + addr;
skb_pull(skb, 48);
memcpy(buf, skb->data, MT7996_EEPROM_BLOCK_SIZE);
--
2.53.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-09-10 2:11 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-09-04 4:49 FAILED: patch "[PATCH] wifi: mt76: mt7996: bound the device EEPROM address before" failed to apply to 6.6-stable tree gregkh
2026-09-10 2:11 ` [PATCH 6.6.y] wifi: mt76: mt7996: bound the device EEPROM address before the EFUSE copy Sasha Levin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox