FAILED: patch "[PATCH] remoteproc: qcom: pas: Guard dtb metadata release with" failed to apply to 6.18-stable tree

Linux kernel -stable discussions
 help / color / mirror / Atom feed

* FAILED: patch "[PATCH] remoteproc: qcom: pas: Guard dtb metadata release with" failed to apply to 6.18-stable tree
@ 2026-09-03 14:20 gregkh
  2026-09-09 10:10 ` [PATCH 6.18.y 1/2] firmware: qcom_scm: Rename peripheral as pas_id Sasha Levin
  0 siblings, 1 reply; 3+ messages in thread
From: gregkh @ 2026-09-03 14:20 UTC (permalink / raw)
  To: mukesh.ojha, andersson, dmitry.baryshkov, konrad.dybcio; +Cc: stable


The patch below does not apply to the 6.18-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.18.y
git checkout FETCH_HEAD
git cherry-pick -x c06c5ab4945392d2c2aded6d832ab6b58cabe351
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026090336-enticing-sandstone-d55c@gregkh' --subject-prefix 'PATCH 6.18.y' 'HEAD^..'

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From c06c5ab4945392d2c2aded6d832ab6b58cabe351 Mon Sep 17 00:00:00 2001
From: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Date: Fri, 24 Jul 2026 23:58:54 +0530
Subject: [PATCH] remoteproc: qcom: pas: Guard dtb metadata release with
 dtb_pas_id check

All other call sites of qcom_scm_pas_metadata_release() for the DTB
context are guarded by a check on pas->dtb_pas_id, but the call inside
qcom_pas_load() was not. Fix this by moving the call to the guarded
block.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Fixes: 29814986b82e ("remoteproc: qcom_q6v5_pas: add support for dtb co-firmware loading")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260724182858.1868271-3-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index fb633c2b823d..507c7008663f 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -245,17 +245,14 @@ static int qcom_pas_load(struct rproc *rproc, const struct firmware *fw)
 		ret = qcom_mdt_pas_load(pas->dtb_pas_ctx, pas->dtb_firmware,
 					pas->dtb_firmware_name, (__force void *)pas->dtb_mem_region,
 					&pas->dtb_mem_reloc);
-		if (ret)
-			goto release_dtb_metadata;
+		if (ret) {
+			qcom_pas_metadata_release(pas->dtb_pas_ctx);
+			release_firmware(pas->dtb_firmware);
+			return ret;
+		}
 	}
 
 	return 0;
-
-release_dtb_metadata:
-	qcom_pas_metadata_release(pas->dtb_pas_ctx);
-	release_firmware(pas->dtb_firmware);
-
-	return ret;
 }
 
 static void qcom_pas_unmap_carveout(struct rproc *rproc, phys_addr_t mem_phys, size_t size)


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* [PATCH 6.18.y 1/2] firmware: qcom_scm: Rename peripheral as pas_id
  2026-09-03 14:20 FAILED: patch "[PATCH] remoteproc: qcom: pas: Guard dtb metadata release with" failed to apply to 6.18-stable tree gregkh
@ 2026-09-09 10:10 ` Sasha Levin
  2026-09-09 10:10   ` [PATCH 6.18.y 2/2] remoteproc: qcom: pas: Guard dtb metadata release with dtb_pas_id check Sasha Levin
  0 siblings, 1 reply; 3+ messages in thread
From: Sasha Levin @ 2026-09-09 10:10 UTC (permalink / raw)
  To: stable
  Cc: Mukesh Ojha, Bryan O'Donoghue, Konrad Dybcio, Bjorn Andersson,
	Sasha Levin

From: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>

[ Upstream commit 69054348cc1c2d87acad90aec5e6e0d191012aff ]

Peripheral and pas_id refers to unique id for a subsystem and used only
when peripheral authentication service from secure world is utilized.

Lets rename peripheral to pas_id to reflect closer to its meaning.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-3-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: c06c5ab49453 ("remoteproc: qcom: pas: Guard dtb metadata release with dtb_pas_id check")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/qcom/qcom_scm.c       | 30 +++++++++++++-------------
 include/linux/firmware/qcom/qcom_scm.h | 10 ++++-----
 2 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
index e777b7cb9b127..3379607eaf94f 100644
--- a/drivers/firmware/qcom/qcom_scm.c
+++ b/drivers/firmware/qcom/qcom_scm.c
@@ -562,7 +562,7 @@ static void qcom_scm_set_download_mode(u32 dload_mode)
  * qcom_scm_pas_init_image() - Initialize peripheral authentication service
  *			       state machine for a given peripheral, using the
  *			       metadata
- * @peripheral: peripheral id
+ * @pas_id:	peripheral authentication service id
  * @metadata:	pointer to memory containing ELF header, program header table
  *		and optional blob of data used for authenticating the metadata
  *		and the rest of the firmware
@@ -575,7 +575,7 @@ static void qcom_scm_set_download_mode(u32 dload_mode)
  * track the metadata allocation, this needs to be released by invoking
  * qcom_scm_pas_metadata_release() by the caller.
  */
-int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size,
+int qcom_scm_pas_init_image(u32 pas_id, const void *metadata, size_t size,
 			    struct qcom_scm_pas_metadata *ctx)
 {
 	dma_addr_t mdata_phys;
@@ -585,7 +585,7 @@ int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size,
 		.svc = QCOM_SCM_SVC_PIL,
 		.cmd = QCOM_SCM_PIL_PAS_INIT_IMAGE,
 		.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW),
-		.args[0] = peripheral,
+		.args[0] = pas_id,
 		.owner = ARM_SMCCC_OWNER_SIP,
 	};
 	struct qcom_scm_res res;
@@ -658,20 +658,20 @@ EXPORT_SYMBOL_GPL(qcom_scm_pas_metadata_release);
 /**
  * qcom_scm_pas_mem_setup() - Prepare the memory related to a given peripheral
  *			      for firmware loading
- * @peripheral:	peripheral id
+ * @pas_id:	peripheral authentication service id
  * @addr:	start address of memory area to prepare
  * @size:	size of the memory area to prepare
  *
  * Returns 0 on success.
  */
-int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, phys_addr_t size)
+int qcom_scm_pas_mem_setup(u32 pas_id, phys_addr_t addr, phys_addr_t size)
 {
 	int ret;
 	struct qcom_scm_desc desc = {
 		.svc = QCOM_SCM_SVC_PIL,
 		.cmd = QCOM_SCM_PIL_PAS_MEM_SETUP,
 		.arginfo = QCOM_SCM_ARGS(3),
-		.args[0] = peripheral,
+		.args[0] = pas_id,
 		.args[1] = addr,
 		.args[2] = size,
 		.owner = ARM_SMCCC_OWNER_SIP,
@@ -699,18 +699,18 @@ EXPORT_SYMBOL_GPL(qcom_scm_pas_mem_setup);
 /**
  * qcom_scm_pas_auth_and_reset() - Authenticate the given peripheral firmware
  *				   and reset the remote processor
- * @peripheral:	peripheral id
+ * @pas_id:	peripheral authentication service id
  *
  * Return 0 on success.
  */
-int qcom_scm_pas_auth_and_reset(u32 peripheral)
+int qcom_scm_pas_auth_and_reset(u32 pas_id)
 {
 	int ret;
 	struct qcom_scm_desc desc = {
 		.svc = QCOM_SCM_SVC_PIL,
 		.cmd = QCOM_SCM_PIL_PAS_AUTH_AND_RESET,
 		.arginfo = QCOM_SCM_ARGS(1),
-		.args[0] = peripheral,
+		.args[0] = pas_id,
 		.owner = ARM_SMCCC_OWNER_SIP,
 	};
 	struct qcom_scm_res res;
@@ -735,18 +735,18 @@ EXPORT_SYMBOL_GPL(qcom_scm_pas_auth_and_reset);
 
 /**
  * qcom_scm_pas_shutdown() - Shut down the remote processor
- * @peripheral: peripheral id
+ * @pas_id:	peripheral authentication service id
  *
  * Returns 0 on success.
  */
-int qcom_scm_pas_shutdown(u32 peripheral)
+int qcom_scm_pas_shutdown(u32 pas_id)
 {
 	int ret;
 	struct qcom_scm_desc desc = {
 		.svc = QCOM_SCM_SVC_PIL,
 		.cmd = QCOM_SCM_PIL_PAS_SHUTDOWN,
 		.arginfo = QCOM_SCM_ARGS(1),
-		.args[0] = peripheral,
+		.args[0] = pas_id,
 		.owner = ARM_SMCCC_OWNER_SIP,
 	};
 	struct qcom_scm_res res;
@@ -772,18 +772,18 @@ EXPORT_SYMBOL_GPL(qcom_scm_pas_shutdown);
 /**
  * qcom_scm_pas_supported() - Check if the peripheral authentication service is
  *			      available for the given peripherial
- * @peripheral:	peripheral id
+ * @pas_id:	peripheral authentication service id
  *
  * Returns true if PAS is supported for this peripheral, otherwise false.
  */
-bool qcom_scm_pas_supported(u32 peripheral)
+bool qcom_scm_pas_supported(u32 pas_id)
 {
 	int ret;
 	struct qcom_scm_desc desc = {
 		.svc = QCOM_SCM_SVC_PIL,
 		.cmd = QCOM_SCM_PIL_PAS_IS_SUPPORTED,
 		.arginfo = QCOM_SCM_ARGS(1),
-		.args[0] = peripheral,
+		.args[0] = pas_id,
 		.owner = ARM_SMCCC_OWNER_SIP,
 	};
 	struct qcom_scm_res res;
diff --git a/include/linux/firmware/qcom/qcom_scm.h b/include/linux/firmware/qcom/qcom_scm.h
index a55ca771286bf..a13f703b16cd4 100644
--- a/include/linux/firmware/qcom/qcom_scm.h
+++ b/include/linux/firmware/qcom/qcom_scm.h
@@ -72,13 +72,13 @@ struct qcom_scm_pas_metadata {
 	ssize_t size;
 };
 
-int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size,
+int qcom_scm_pas_init_image(u32 pas_id, const void *metadata, size_t size,
 			    struct qcom_scm_pas_metadata *ctx);
 void qcom_scm_pas_metadata_release(struct qcom_scm_pas_metadata *ctx);
-int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, phys_addr_t size);
-int qcom_scm_pas_auth_and_reset(u32 peripheral);
-int qcom_scm_pas_shutdown(u32 peripheral);
-bool qcom_scm_pas_supported(u32 peripheral);
+int qcom_scm_pas_mem_setup(u32 pas_id, phys_addr_t addr, phys_addr_t size);
+int qcom_scm_pas_auth_and_reset(u32 pas_id);
+int qcom_scm_pas_shutdown(u32 pas_id);
+bool qcom_scm_pas_supported(u32 pas_id);
 
 int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val);
 int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);
-- 
2.53.0


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* [PATCH 6.18.y 2/2] remoteproc: qcom: pas: Guard dtb metadata release with dtb_pas_id check
  2026-09-09 10:10 ` [PATCH 6.18.y 1/2] firmware: qcom_scm: Rename peripheral as pas_id Sasha Levin
@ 2026-09-09 10:10   ` Sasha Levin
  0 siblings, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2026-09-09 10:10 UTC (permalink / raw)
  To: stable
  Cc: Mukesh Ojha, Konrad Dybcio, Dmitry Baryshkov, Bjorn Andersson,
	Sasha Levin

From: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>

[ Upstream commit c06c5ab4945392d2c2aded6d832ab6b58cabe351 ]

All other call sites of qcom_scm_pas_metadata_release() for the DTB
context are guarded by a check on pas->dtb_pas_id, but the call inside
qcom_pas_load() was not. Fix this by moving the call to the guarded
block.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Fixes: 29814986b82e ("remoteproc: qcom_q6v5_pas: add support for dtb co-firmware loading")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260724182858.1868271-3-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
[ adapted DTB cleanup to the older separate initialization and loading APIs. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/remoteproc/qcom_q6v5_pas.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 158bcd6cc85c5..8c59eac9bd973 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -248,15 +248,14 @@ static int qcom_pas_load(struct rproc *rproc, const struct firmware *fw)
 		ret = qcom_mdt_load_no_init(pas->dev, pas->dtb_firmware, pas->dtb_firmware_name,
 					    pas->dtb_mem_region, pas->dtb_mem_phys,
 					    pas->dtb_mem_size, &pas->dtb_mem_reloc);
-		if (ret)
-			goto release_dtb_metadata;
+		if (ret) {
+			qcom_scm_pas_metadata_release(&pas->dtb_pas_metadata);
+			goto release_dtb_firmware;
+		}
 	}
 
 	return 0;
 
-release_dtb_metadata:
-	qcom_scm_pas_metadata_release(&pas->dtb_pas_metadata);
-
 release_dtb_firmware:
 	release_firmware(pas->dtb_firmware);
 
-- 
2.53.0


^ permalink raw reply related	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2026-09-09 10:10 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-09-03 14:20 FAILED: patch "[PATCH] remoteproc: qcom: pas: Guard dtb metadata release with" failed to apply to 6.18-stable tree gregkh
2026-09-09 10:10 ` [PATCH 6.18.y 1/2] firmware: qcom_scm: Rename peripheral as pas_id Sasha Levin
2026-09-09 10:10   ` [PATCH 6.18.y 2/2] remoteproc: qcom: pas: Guard dtb metadata release with dtb_pas_id check Sasha Levin

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox