FAILED: patch "[PATCH] scsi: qla2xxx: Bound VP index against VP_CTRL IOCB bitmap" failed to apply to 6.1-stable tree

FAILED: patch "[PATCH] scsi: qla2xxx: Bound VP index against VP_CTRL IOCB bitmap" failed to apply to 6.1-stable tree

[gregkh]

The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 878613ecb5a36db26859c4fd83daf9283a334fa2
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026090913-chess-wrinkly-8139@gregkh' --subject-prefix 'PATCH 6.1.y' 'HEAD^..'

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 878613ecb5a36db26859c4fd83daf9283a334fa2 Mon Sep 17 00:00:00 2001
From: Nilesh Javali <njavali@marvell.com>
Date: Thu, 23 Jul 2026 10:34:05 +0530
Subject: [PATCH] scsi: qla2xxx: Bound VP index against VP_CTRL IOCB bitmap
 size

The VP control IOCB selects its target virtual port by setting one bit
in vp_idx_map, a fixed 16-byte (128-bit) array in both
vp_ctrl_entry_24xx and vp_ctrl_entry_24xx_ext. qla25xx_ctrlvp_iocb()
computes map = (vp_index - 1) / 8 and writes vce->vp_idx_map[map]
without checking that map stays within the array.

max_npiv_vports is taken from firmware and only sanitized to a
MIN_MULTI_ID_FABRIC-aligned boundary, so it can legitimately be 191 or
255, and qla24xx_control_vp() only rejects vp_index >= max_npiv_vports.
A vp_index above 128 therefore yields map >= 16 and an out-of-bounds
write of up to 16 bytes past vp_idx_map, corrupting the trailing IOCB
fields (or the adjacent request-ring slot on the 64-byte layout).

Reject a vp_index that cannot be represented in the IOCB bitmap in
qla24xx_control_vp(), and add a defensive ARRAY_SIZE() guard in
qla25xx_ctrlvp_iocb() before the write. Adapters that report the usual
63 or 127 NPIV vports are unaffected.

Fixes: 2853192e154b ("scsi: qla2xxx: Use IOCB path to submit Control VP MBX command")
Cc: stable@vger.kernel.org
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260723050413.3897522-49-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>

diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 8bd7c94d7c7c..c4595626c16b 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -4126,6 +4126,12 @@ qla25xx_ctrlvp_iocb(srb_t *sp, void *pkt)
 	vce->entry_count = 1;
 	vce->command = cpu_to_le16(sp->u.iocb_cmd.u.ctrlvp.cmd);
 	vce->vp_count = cpu_to_le16(1);
+	if (map >= ARRAY_SIZE(vce->vp_idx_map)) {
+		ql_log(ql_log_warn, sp->vha, 0x307c,
+		       "ctrlvp: vp_index %u exceeds vp_idx_map capacity\n",
+		       sp->u.iocb_cmd.u.ctrlvp.vp_index);
+		return;
+	}
 	vce->vp_idx_map[map] |= 1 << pos;
 }
 
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 7072af5b4217..b7d9c1a53f3c 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -987,6 +987,14 @@ int qla24xx_control_vp(scsi_qla_host_t *vha, int cmd)
 	if (vp_index == 0 || vp_index >= ha->max_npiv_vports)
 		return QLA_PARAMETER_ERROR;
 
+	/*
+	 * The VP_CTRL IOCB selects the target VP through a fixed 128-bit
+	 * (16-byte) vp_idx_map bitmap, so vp_index must fit within it even
+	 * if firmware advertises more NPIV vports.
+	 */
+	if (vp_index > sizeof_field(struct vp_ctrl_entry_24xx, vp_idx_map) * 8)
+		return QLA_PARAMETER_ERROR;
+
 	/* ref: INIT */
 	sp = qla2x00_get_sp(base_vha, NULL, GFP_KERNEL);
 	if (!sp)

[PATCH 6.1.y] scsi: qla2xxx: Bound VP index against VP_CTRL IOCB bitmap size

[Sasha Levin]

From: Nilesh Javali <njavali@marvell.com>

[ Upstream commit 878613ecb5a36db26859c4fd83daf9283a334fa2 ]

The VP control IOCB selects its target virtual port by setting one bit
in vp_idx_map, a fixed 16-byte (128-bit) array in both
vp_ctrl_entry_24xx and vp_ctrl_entry_24xx_ext. qla25xx_ctrlvp_iocb()
computes map = (vp_index - 1) / 8 and writes vce->vp_idx_map[map]
without checking that map stays within the array.

max_npiv_vports is taken from firmware and only sanitized to a
MIN_MULTI_ID_FABRIC-aligned boundary, so it can legitimately be 191 or
255, and qla24xx_control_vp() only rejects vp_index >= max_npiv_vports.
A vp_index above 128 therefore yields map >= 16 and an out-of-bounds
write of up to 16 bytes past vp_idx_map, corrupting the trailing IOCB
fields (or the adjacent request-ring slot on the 64-byte layout).

Reject a vp_index that cannot be represented in the IOCB bitmap in
qla24xx_control_vp(), and add a defensive ARRAY_SIZE() guard in
qla25xx_ctrlvp_iocb() before the write. Adapters that report the usual
63 or 127 NPIV vports are unaffected.

Fixes: 2853192e154b ("scsi: qla2xxx: Use IOCB path to submit Control VP MBX command")
Cc: stable@vger.kernel.org
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260723050413.3897522-49-njavali@marvell.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
[ Adjusted guard placement in qla25xx_ctrlvp_iocb() to match the older initialization order. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_iocb.c | 6 ++++++
 drivers/scsi/qla2xxx/qla_mid.c  | 8 ++++++++
 2 files changed, 14 insertions(+)

diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 7bccd525ee19b..800c1885050fd 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -3826,6 +3826,12 @@ qla25xx_ctrlvp_iocb(srb_t *sp, struct vp_ctrl_entry_24xx *vce)
 	 */
 	map = (sp->u.iocb_cmd.u.ctrlvp.vp_index - 1) / 8;
 	pos = (sp->u.iocb_cmd.u.ctrlvp.vp_index - 1) & 7;
+	if (map >= ARRAY_SIZE(vce->vp_idx_map)) {
+		ql_log(ql_log_warn, sp->vha, 0x307c,
+		       "ctrlvp: vp_index %u exceeds vp_idx_map capacity\n",
+		       sp->u.iocb_cmd.u.ctrlvp.vp_index);
+		return;
+	}
 	vce->vp_idx_map[map] |= 1 << pos;
 }
 
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 79e4319bbbd28..a552b8dea4833 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -966,6 +966,14 @@ int qla24xx_control_vp(scsi_qla_host_t *vha, int cmd)
 	if (vp_index == 0 || vp_index >= ha->max_npiv_vports)
 		return QLA_PARAMETER_ERROR;
 
+	/*
+	 * The VP_CTRL IOCB selects the target VP through a fixed 128-bit
+	 * (16-byte) vp_idx_map bitmap, so vp_index must fit within it even
+	 * if firmware advertises more NPIV vports.
+	 */
+	if (vp_index > sizeof_field(struct vp_ctrl_entry_24xx, vp_idx_map) * 8)
+		return QLA_PARAMETER_ERROR;
+
 	/* ref: INIT */
 	sp = qla2x00_get_sp(base_vha, NULL, GFP_KERNEL);
 	if (!sp)
-- 
2.53.0